HomeMy WebLinkAboutContract ..
Award Date: October 9, 2017 CAG-17-174.
� Awarded to: Laser Underground & Earthworks, Inc.
20417 87th Ave SE
Snohomish, WA 98296
' Award Amount: $5,048,703.20
�
Bidding Requirements, City of Renton
.. Forms, Contract Forms, Conditions of the
Contract, Plans and Specifications
�
-� Construction of:
- Renton Hill Utility Replacement Project
°� PROJECT NO.
�.
WTR-27-3824
WWP-27-3824
.. SW P-27-3824
_
August 2017
�.
City of Renton
� 1055 South Grady Way
Renton, WA 98057
�
�
� C�ty of ��� ��
� �,
�
�. o . ,� -� •
��'r>ivT�;
�
�
�
CITY OF RENTON
�
RENTON, WASHINGTON
�
�
CONTRACT DOCUMENTS
forthe
� Renton Hill Utility Replacement Project
�
�
PROJECT NO.
WTR-27-3824
� W W P-27-3824
SWP-27-3824
�
�„ August 2017
+r�
• BIDDING REQUIREMENTS
CONTRACT FORMS
�„ CONDITIONS OF THE CONTRACT
SPECIFICATIONS
PLANS
..
�
���J ��_I✓FY�
.>� CiG "'A.Sy,.
� P„\v l�
�
� ,�
�"� "I_
� 4
� �' Vi �v
0� ��-�- c ,�
�`-`�'t�:�?E�cF.���,
JV, _ ... e�
1QNA1_ ��
�rr
//�/��/7
O1_COVER W-3824.doc
�tir
Wr
�, LASER
UNDERGROUND 8 EARTHWORKS, INC.
r
�
24 HOU R CONTACT LIST
10/25/2017
+w� Project
Project Name Renton Hill Utility Replacement Reference# 17-13
� Project Address Various Locations between Cedar Ave South and High Ave South in Renton
General Contractor LASER UNDERGROUND& EARTHWORKS, INC.
"" CONTACTS
'�' Responsible Officer BRET LANE
E-mail Address BRET@LASERUG.COM
■r Office Phone 360-453-3511 Cell Phone 206-571-3268
� Superintendant BRET LANE
E-mail Address BRET@LASERUG.COM
Office Phone 360-453-3511 Cell Phone 206-571-3268
�
Site Foreman DERICK WELLS
� E-mail Address DERICK LASERUG.COM
Office Phone 206-334-8677 Cell Phone 206-334-8677
�
Traffic Control Supervisor JASON LANE
� Company LASER UNDERGROUND& EARTHWORKS
E-mail Address JASONCa@LASERUG.COM
Office Phone 360-453-3510 Cell Phone 206-235-3052
r�r
Bonding Agent GARY NIEHL
� Company NIEHL INSURANCE AGENCY/RLI SURETY
E-mail Address GARY@NIEHLINSURANCE.COM
�+ Office Phone 425-644-1600 FAX# 425-6442152
r�r
�r
20417 87th Ave SE-Snohomish, WA 98296 Office:425-251-1636 � Fax:425-251-1656
� Business License _ c��Qf�� --
,.-�.��
:�3 L•'^� `� \��
x
t '�� � � � ���j�
F �� # :���:«�� °� �:,
i�I `�+`�
1055 South Grady Way Renton, WA 98057(425)430-6851 Fax(425)430-6983
� License#: BL.041878
Expiration Date: 01/31/2019
�
Issued Date: 10/31/2017
Laser Underground & Earthworks Inc
20417 87th Ave SE
'�" Snohomish, WA 98296
�
Detach License and Post at Business Location Listed Below.
�1
�
� e._ �_...., �,..,_ _ , ,�w . ,w. ,� a..� � �. ,�., ,. _,�,. �.w. ..,. >,_n.M... _ ......M»_w..�.�,.. .
�,. .�..
� � BUSINESS LICENSE - ������'~ �
k � Gity of � `, �
� Out of City ��"� �'°� `� ��" � ?� �i�.
� s' � ,��,- �
� � ����� � .�� �� � �
� NON-TRANSFERABLE i
; License#: BL.041878 �
�
� Expiration Date: 01/31/2019 !
�ri � �
NAICS Code: 237110 �
's'
LASER UNDERGROUND & EARTHWORKS INC �
,
� 20417 87th Ave SE �
� Snohomish, WA 98296 �
�
� � :
i j
� �
� � �
� �
� � �
� f1/t'"�--"'' �
oC. 3
� �� �� �
� � Mayor,Denis Law ASD Administrator,Jan Hawn j
� Licensee has applied for a City of Renton business license in accordance with Renton Municipal Code(the Code),Title V Business, i
� Chapter 5 Business License.The Licensee agrees to comply with all requirements of the Code,as well as State laws and �
�
� regulations applicable to the business activity licensed. �
� Post this License at the place of business.
� This license does not allow licensee to operate a permanent physical location in Renton. �
� 1055 S Grady Way,Renton WA 98057 (425)430 6851 Fax(425)430-6983 licensing@rentonwa.gov �
�.,Fw.�,,.M..�.,.._._.. .�..,..s.R..:�...w�..�., ....�.....g..���„�,w...�..�w.,..�a.....��.,�.�,�„..�.,� �_�_.._.,�.�..,...�-,�s.,_........�.,..,m..�.�..,�,..�.�m..,.,..�...,.:.,�9_,..,..:.�..�..�....�,4.. ....�..
�
�
�.. �, �, , � -, �,
���STAT�.O�
�i O i .., � �i
: w� J, �= BUSINESS LICENSE _{ �
..::�7 i ��'r 1889 T��y f' j
STATE OF
WASHINGTON i �I
� Unified Business ID#: 601269998 ��
� Corporation Business ID#: 001 , �
Location: 0001 �' '
,� LASER UNDERGROUND AND EARTHWORKS INC. �I
Expires:Aug 31, 2018
�1'I
20417 87TH AVE SE
SNOHOMISH,WA 98296-5118
; ;< ;
' UNEMPLOYMENT INSURANCE-ACTIVE INDUSTRIAL INSURANCE -ACTIVE "' �
�-�
� '.I
� TAX REGISTRATION -ACTIVE
� i
I
F} , I
�� CITY ENDORSEMENTS: ;� �
_; ISSAQUAM GENERAL BUSINESS -ACTIVE ��
�� 1
`r• LICENSING RESTRICTIONS: `- I
;' Not licensed to hire minors without a Minor Work Permit. ���'
� �;
; ��:I
,
�;;' �; I,
�:I '
:�
�:.
/"1 R;
�
I
I k.
I;
.�
�' (;
j i'
�.
i
� E- "
�i
l l f I
� I
iI ��
��' `�
�= I
j
�� 4 � ��I
.' This document lists the registrations,endorsements,and licenses authorized for the business r `�''I
named above.By accepting this document,the ficensee certifies the information on the application _ `
, was complete,true,and accurate to the best of his or her knowledge,and that business will be _ ;,}I
conducted in compliance with all applicable Washington state,county,and city regulations. Director,Department of Revenue ��
� �::'
,. n _� — ., ,., ,,_ , „ . �, _. �.�_ xr.
, . � � � _ .�..�. .. ..�_„� ,_
� Registered agent
Agent type on file: Individual
� Agent name on file: BRET LANE
Agent's office street address on file: 20417 87TH AVE SE
SNOHOMISH , WA 98296-0000
� USA
� txL0002
�
+�r
�r
+rr
�
r�
�
Department of Labor and Industries
PO Box 44450 Z����TNDRGRND & ERTHWRKS INC
+� Olympia, WA 98504-4450 ` � g ; �����ERUE 101 OJ
I��:;E4�=265���98
i
'�' R�C a�se�r'�vided by Law as:
' s�iZc��I,ContractQr
� ����� �
, ti
� � a �� � -�
LASER iJNDRGRND&EI�'THVj����� {` ��t���a�te �11l1990
20417 87TH AVE SE " J��`10/2/2018
SNOHOMISH WA 9829b � ; ,�
�
�rr
�rr-"
�r
�
�
�
nr
r�r
�
� C� ���00� .�.:�:
� .t..
Renton Hill Utility Replacement Project
WTR-27-3824, WWP-27-3824, SWP-27-3824
�
CONTRACT DOCUMENT TABLE OF CONTENTS
�
,�, Summary of Fair Practices Policy
Summary of Americans with Disability Act Policy
Scope of Work
�► Vicinity Map
Instructions to Bidders
Call for Bids
"'�" * Proposal & Combined Affidavit & Certificate Form:
Non-Collusion
Anti-Trust Claims
� Minimum Wage Form
* Department of Labor and Industries Certificate of Registration
,� * Bid Bond Form
* Schedule of Prices
** Subcontractors List (If bid exceeds $1,000,000 and includes HVAC, plumbing, or electrical
�r subcontractors per RCW)
❖ Bond to the City of Renton
❖ Fair Practices Policy Affidavit of Compliance
'�" ❖ Contract Agreement (Contracts other than Federal -Aid FHWA)
Prevailing Minimum Hourly Wage Rates (New job classifications)
Statement of Intent to Pay Prevailing Wages
`� Affidavit of Prevailing Wages Paid
Special Provisions
� Standard Plans
Special Contract Information
„r, Documents marked as follows must be submitted at the time noted and must be executed by
the Contractor, President and Vice President or Secretary if corporation by-laws permit. All
pages must be signed. In the event another person has been duly authorized to execute
� contracts, a copy of the corporation minutes establishing this authority must be attached to the
bid document.
�" * Submit with Bid
** Submit with Bid or within 1 hour of bid
� ❖ Submit at Notice of Award
CITY OF RENTON
Public Works Department
,,,,, 1055 South Grady Way
Renton, Washington 98057
wr
02 CONTENTS W-3824.doc\
�
�
wr
� CITY OF RENTON
SUMMARY OF FA1R PRACTICES POIICY
,,,,,, ADOPTED BY RESOLUTION NO. 4085
It is the policy of the City of Renton to promote and provide equal treatment and service
to all citizens and to ensure equal employment opportunity to all persons without regard
�rr
to their race; religion/creed; national origin; ancestry; sex; age over 4�; sexual orientation
or gender identity; pregnancy; NIV/AIDS and F4epatitis C status; use of a guide dog/service
�, animal; marital status; parental/family status; military status; or veteran's status, or the
presence of a physical, sensory, or mental disability, when the City of Renton can
reasonably accommodate the disability, of employees and applicants for employment
�w and fair, non-discriminatory treatment to all citizens. All departments of the City of
Renton shall adhere to the following guidelines:
(1) EMPLOYMENT PRACTICES - The City of Renton will ensure all employment
� related activities included recruitment, selection, promotion, demotion,
training, retention and separation are conducted in a manner which is
„�, based on job-related criteria which does not discriminate against women,
minorities and other protected classes. Human resources decisions will be
in accordance with individual performance, sta�ng requirements,
+� governing civil service rules, and labor contract agreements.
(2) COOPERATION WiTH HUMAN RIGHTS ORGANIZATIONS - The City of
,�, Renton wil) cooperate fully with all organizations and commissions
organized to promote fair practices and equal opportunity in employment.
(3) CONTRACTORS' OBLIGATIONS - Cvntractors, sub-contractors, consultants
�"' and suppliers conducting business with the City of Renton shall affirm and
subscribe to the Fair Practices and Non-discrimination policies set forth by
� the law and by City policy.
Copies of this policy shall be distributed to all City employees, shall appear in all
operational documentation of the City, including bid calls, and shall be p�ominently
�"' displayed in appropriate city facilities.
CONCURRED IN by the City Council of the City of Renton, Washington, this�th day of
;,�„ March , 2011 ,
GTY RENTON � RENTON CITY COUNCIL
+yrr � � .
-`�=�•_
Denis Law, Mayor unci) Pr ident
�rr
Attest: ., ��:�: :.::: .......
wr V,. p �`"��.,��„�fiN�Q����'�'.
� ��z��' �'�U L ;
; � :.
Bonnie I. Walton, City Clerk c� A L _
.r ~� ►J t� 'r��
l � ^ ~
�
i� '`�i��
i� 6, \��
/��,// �S��\\\�a�\
� '�;%!�//1�IpIi111iIIt1U1\h�����
irr
� CITY OF RENTON
�
Renton Hill Utility Replacement Project
WTR-27-3824, WWP-27-3824, SWP-27-3824
� SCOPE OF WORK
arr
The work involved under the terms of this contract document shall be full and complete installation
of the facilities, as shown on the plans and as described in the construction specifications, to include
"�" but not be limited to:
�
• Installation of approximately 8,700 linear feet of Class 52 8-Inch Diameter and 400 linear
feet of Class 52, 6-Inch Diameter Cement Lined Ductile Iron Water Pipe with Poly-wrap,
including fittings,valves, and fire hydrant assemblies.
� • Testing, poly-pigging, disinfecting and flushing of water mains.
• Installation of approximately 3400 linear feet of new 8-inch PVC sewer main, 22 linear feet
�,,; of new 8-inch HDPE sewer main, and 150 linear feet of new 10-inch PVC sewer main.
• Installation of 4-inch and 6-inch side sewer pipes, including Cured-In-Place pipe.
�rr
• Installation of 2154-inch diameter manholes and 160-inch manhole.
�r,r • Installation of approximately 5,200 linear feet combined of 6-inch, 8-inch, and 12-inch storm
drain pipe, and 35 48-inch Type 2 catch basins.
,� • Installation of approximately 110 linear feet of trench drain.
• Trench excavation, including removal of existing unsuitable material, stockpiling excavated
�
material, and maintenance of existing utilities.
• Removal and replacement of asphalt concrete pavement, asphalt overlay, concrete curbs,
gutters, and driveways.
�
• Installing and maintaining adequate TESC measures and restoring all disturbed areas.
rrr
Any contractor connected with this project shall comply with all Federal, State, County, and City
codes and regulations applicable to such work and perform the work in accordance with the plans
� and specifications of this contract document. A total of 460 working days will be allowed for the
completion of this project.
�rr
rr
04 SCOPE W-3824.doc\
�
�r
rr �
�r
CITY OF RENTON
SUMMARY OFAMERICANS WITH DIS�lBILTI7ESAGT POLICY
�' ADOPTED BYRESOLL1770NN0. 3007
The policy of the City of Renton is to promote and afford equal treatment and seivice to all citizens and to assure
,� �Pj�t oPPo�tY � l�rsons with disabiliLies, when the City of Renton can reasonably accommodate the
disa.bility. This policy shall be based an the principles of equal employment apportunity, the Americans With
Disabilities Act and other applicable guidelines as set forth m federal,state and locai laws. All departine�rts of the City
of Renton shall adhere to the following guidelines:
�
(1) EMPLOYMENT FRACTICES - All activities relating to empbyment such as
recnutment,selection,promotion,tennination and training shall be conducted in a non-
� discriminatory manner. Personnel dacisions wiit be based an individual perfonnance,
staffing requirements,and in accordance with the Americans Witb Disabilities Act and
other applicable laws and regulati�ss.
'� (2) COOPERATION WITH I�UIVLAN RIGHTS ORGANI7.ATION� - The City of .
Renton will cooperate fully with all organirations and commissions organized to
promote fair pradices and equal oppordinity for persons with disabilities in
�, employmeut and receipt of City services,activities and programs.
(3) AMERICANS WTTH DISABILTTIE�ACT POLICY-'171e City of Rentan Americans
With Disabilities Act Policy will be maintained to facilitate equitable representation
+�r within the City work forcc and to assurc ccNat cmP1oY� QPPo�h' � aN�
access to City services,activities and programs to all people with disabilities. It shall
be the responsibility and the duty of all City officials and employces to carry out the
� policies and guidelines as set forth in tlris policy
(4) CONTRACTORS' OBLIGATION - Contractors, subcontractars, consultants and
suppliers conducting business with the City of Renton shall abide by the requiremea�ts
�" of the Americans With Disabilities Act and promate a.ccess to services, activities and
programs for people with disabilities.
� Copies of this policy shall be distributed to all City employces,shatl appear in all operational documer�tation of the City,
including bid calls,and shall be promineutly displayed in appropriate City facilities.
CONCURRED IN by the City Council of the City of Renton, Washrngton,
+�r
this 4th day of October 1993.
,�, CITY;�F RENTON RENTON C1TY COUNCIL:
/ ( � � •5' � J� � `
� , l. ). S.� V .,:: E.. %.'\ ..:� .� ,-� +� �./'[
�-'_
Mayor � Council Presidem
r _�
�Att�,st: � /�
a�rr C�' �" ''
City Clerk
�rr
+rr
�
+�r.
+�r
� , ��w.,,
<,���`'"
���
� a �,,
�P
��
��O
S 2ND ST
�P
_ S RD o S�"� 16 9
�
� ,, p � .���
� �
� �
�L
� ITE
� ,a�, w
>
Q
� Pir O
�
Z
W
405 �
� �.
� �
S �R A�� W A � .
�- �
o �
m -��
J
Q
F-- „
�
�. VICINITY MAP
NNO SCALE
�
�
�
�rr
w�r
�
� C���.�00� ���
INSTRUCTIONS TO BIDDERS
�
1. Sealed bids for this proposal will be received by the City of Renton at the office of the Renton City
Clerk, Renton City Hall, until the time and date specified in the Call for Bids.
�
At this time the bids will be publicly opened and read, after which the bids will be considered and the
award made as early as practicable.
`�` No proposal may be changed or withdrawn after the time set for receiving bids. Proposals shall be
submitted on the forms attached hereto.
`�" 2 Any omissions, discrepancies or need for interpretation should be brought, in writing, to the
attention of the Project Engineer. Written addenda to clarify questions that arise may then be
issued.
,�r
No oral statements by Owner, Engineer, or other representative of the owner shall, in any way,
modify the contract documents, whether made before or after letting the contract.
+�r
3 The work to be done is shown in the plans and/or specifications. Quantities are understood to be
only approximate. Final payment will be based on actual quantities and at the unit price bid. The City
+� reserves the right to add or to eliminate portions of that work as deemed necessary.
4. Plans may be examined and copies obtained at the Public Works Department Office. Bidders shall
�wr satisfy themselves as to the local conditions by inspection of the site.
5. The bid price for any item must include the performance of all work necessary for completion of that
�r„ item as described in the specifications.
6. The bid price shall be stated in terms of the units indicated and as to a total amount. In the event of
a,,,,, errors,the unit price bid will govern. Illegible figures will invalidate the bid.
7. The right is reserved to reject any and/or all bids and to waive informalities if it is deemed
,�, advantageous to the City to do so.
8. A certified check or satisfactory bid bond made payable without reservation to the Director of
� Finance of the City of Renton in an amount not less than 5%of the total amount of the bid shall
accompany each bid proposal. Checks will be returned to unsuccessful bidders immediately following
the decision as to award of contract. The check of the successful bidder will be returned provided he
,� enters into a contract and furnishes a satisfactory performance bond covering the full amount of the
work within ten days after receipt of notice of intention to award contract. Should he fail, or refuse
to do so,the check shall be forfeited to the City of Renton as liquidated damage for such failure.
�
9. All bids must be self-explanatory. No opportunity will be offered for oral explanation except as the
City may request further information on particular points.
� 10. The bidder shall, upon request,furnish information to the City as to his financial and practical ability
to satisfactorily perform the work.
"�` 11. Payment for this work will be made in Cash Warrants.
rr
�s
� 12. The contractor shall obtain such construction insurance (e.g.fire and extended coverage, worker's
compensation, public liability, and property damage as identified within Special Provisions,
Specification Section 1-07.18 "Public Liability and Property Damage Insurance".
� 13. The contractor, prior to the start of construction, shall provide the City of Renton a detailed bar chart
type construction schedule for the project.
� 14 Before starting work under this contract, the Contractor is required to supply information to the City
of Renton on all chemical hazards Contractor is bringing into the work place and potentially exposing
City of Renton Employees.
+�r
15. Payment of retainage shall be done in accordance with Section 1-09.9(1) "Retainage".
�' 16. Basis for Approval
The construction contract will be awarded by the City of Renton to the lowest, responsible,
'�' responsive bidder. The bidder shall bid on all bid schedules items of all schedules set forth in the bid
forms to be considered responsive for award. The total price of all schedules will be used to
determine the successful low responsive bidder.
r�w
Partial bids will not be accepted. The owner reserves the right to award any or all schedules of the
Bid to meet the needs of the City. The intent is to award to only one BIDDER.
+rw
17. Trench Excavation Safety Systems
,;,,;,,, As required by RCW 39.04.180, on public works projects in which trench excavation will exceed a
depth of four feet, any contract therefor shall require adequate safety systems for the trench
excavation that meet the requirements of the Washington Industrial Safety and Health Act, Chapter
;�„ 49.17 RCW. These requirements shall be included in the Bid Schedule as a separate item. The costs
of trench safety systems shall not be considered as incidental to any other contract item and any
attempt to include the trench safety systems as an incidental cost is prohibited.
�
18. Payment of Prevailing Wages
�, In accordance with Revised Code of Washington Chapters 39.12 and 49.28 as amended or
supplemented herein, there shall be paid to all laborers,workmen or mechanics employed on this
contract the prevailing rate of wage for an hour's work in the same trade or occupation in the area of
� work regardless of any contractual relationship which may exist, or be alleged to exist, between the
CONTRACTOR and any laborers, workmen, mechanics or subconsultants.
�r.
The most recent issue of the prevailing wage rates is included within these specifications under
section titled "Prevailing Minimum Hourly Wage Rates".The Contractor is Responsible for obtaining
updated issues of the prevailing wage rate forms as they become available during the duration of the
wr
contract. The wage rates shall be included as part of any subcontracts the Contractor may enter into
for work on this project.
19. Pollution Control Requirements
+�r
Work under this contract shall meet all local, state and federal requirements for the prevention of
environmental pollution and the preservation of public natural resources. The CONTRACTOR shall
�` conduct the work in accordance with all applicable pollution control laws. The CONTRACTOR shall
� 06_INSTR August 2012.doc Revised:August 2011
�
� comply with and be liable for all penalties, damages, and violations under Chapter 90.48 RCW, in
performance of the work. The CONTRACTOR shall also comply with Article 4 in the Puget Sound Air
Pollution Control Agency Regulation III regarding removal and encapsulation of asbestos materials.
.r
20. Standard Specifications
All work under this contract shall be performed in accordance with the following standard
� specifications except as may be exempted or modified by the City of Renton Supplemental
Specifications, Special Provisions other sections of these contract documents. These standard
specifications are hereby made a part of this contract and shall control and guide all activities within
�` this ro'ect whether referred to directl ara ra h b ara ra h or not.
p 1 Y, p g p Yp b p ,
1. WSDOT/APWA"2016 Standard Specifications for Road, Bridge and Municipal Construction" and
�""` "Division 1 APWA Supplement" hereinafter referred to by the abbreviated title "Standard
Specifications."
A. Any reference to "State," "State of Washington," "Department of Transportation,"
� "WSDOT," or any combination thereof in the WSDOT/APWA standards shall be modified
to read "City of Renton," unless specifically referring to a standard specification or test
method.
� B. All references to measurement and payment in the WSDOT/APWA standards shall be
detected and the measurement and payment provisions of Section 1-09.14, Measurement
and Payment (added herein) shall govern.
�
21. A preliminary geotechnical engineering report has been completed for the project site based on
subsurface explorations and is available for informational purposes only.A copy may be obtained on-
'�" line through Builders Exchange of Washington, Inc. The Bidders shall familiarize themselves
adequately with the project site and existing subsurface conditions as needed to submit their bid.
Upon approval of the City,the Bidder may make such subsurface explorations and investigations as
'�" they see fit. The Bidder shall be responsible for protection of all existing facilities, utilities and other
buried or surface improvements and shall restore the site to the satisfaction of the City.
�""' 22 Bidder's Checklist
❑ It is the responsibility of each bidder to ascertain if all the documents listed on the attached index
� are included in their copy of the bid specifications. If documents are missing, it is the sole
responsibility of the bidder to contact the City of Renton to obtain the missing documents prior
to bid opening time.
,�we ❑ Have you submitted, as part of your bid, all documents marked in the index as "Submit with Bid"?
❑ Has the bid bond or certified check been enclosed?
0 Is the amount of the bid guaranty at least 5 percent of the total amount of bid including sales
'�` tax?
❑ Has the proposal been signed?
„w,� ❑ Have you bid on ALL ITEMS and ALL SCHEDULES?
❑ Have you submitted the Subcontractors List (If required)?
❑ Have you reviewed the Prevailing Wage Requirements?
�r
❑ Have you certified receipt of addenda, if any?
❑ Have you submitted the Department of Labor and Industries Certificate of Registration form?
�rr
� 06_INSTR August 2012.doc Revised:August 20ll
� CITY OF RENTON CAG-17-174
CALL FOR BIDS
�
Renton Hill Utility Replacement Project
WTR-27-3824, WWP-27-3824, SWP-27-3824
.r
Sealed bids will be received until 2:30 p.m. Tuesday, September 26, 2017 at the City Clerk's office, 7th
floor and will be opened and publicly read in Conference Room 511 on the 5th floor, Renton City Hall,
� 1055 South Grady Way, Renton WA 98057.
The construction of the Renton Hill Utility Replacement Project includes the installation of
� approximately 8,700 linear feet of 8-Inch Diameter and 400 linear feet of 6-Inch Diameter Class 52
Cement Lined Ductile Iron Water Pipe with Poly-wrap, including fittings, valves, and fire hydrant
assemblies,testing, poly-pigging, disinfecting and flushing of water mains, installation of approximately
� 3400 linear feet of new 8-inch PVC sewer main, 22 linear feet of new 8-inch HDPE sewer main, 150
linear feet of new 10-inch PVC sewer main,4-inch and 6-inch side sewer pipes, including Cured-In-Place
pipe, 21-54-inch diameter manholes and 1-60-inch manhole, installation of approximately 5,200 linear
� feet combined of 6-inch, 8-inch, and 12-inch storm drain pipe, 35-48-inch Type 2 catch basins, 110
linear feet of trench drain, removal and replacement of asphalt concrete pavement, asphalt overlay,
concrete curbs,gutters, and driveways.Work will also include any necessary traffic control during the
� duration of the project.
Any contractor connected with this project shall comply with all Federal, State, County, and City codes
,r, and regulations applicable to such work and perform the work in accordance with the plans and
specifications of this contract document.
� The City reserves the right to reject any and/or all bids and to waive any and/or all informalities.
Bid documents will be available September 11, 2017. Plans, specifications, addenda, and the plan
holders list for this project are available on-line through Builders Exchange of Washington, Inc., at
+r http://www.bxwa.com. Click on "bxwa.com"; "Posted Projects", "Public Works", "City of Renton",
"Project's Bidding". (Note: Bidders are encouraged to "Register as a Bidder," in order to receive
automatic email notification of future addenda and to be placed on the "Bidders List.")
� If a bidder has an uestions re ardin the ro'ect lease contact the Pro'ect Mana er John Hobson at
Yq g g p 1 , p 1 g . ,
1055 South Grady Way, Renton, WA 98057,jhobson@rentonwa.gov,or(425)430-7279.
�; A certified check or bid bond in the amount of five percent(5%)of the total of each bid must accompany
each bid.
The City's Fair Practices, Non-Discrimination, and Amer', ans with Disability Act Policies shall apply.
�
.-,.
b �
,r Jaso A. Seth, C ;City Clerk
Published:
�
Daily lournal of Commerce September 11, 2017
Daily Journal of Commerce September 18, 2017
�
�
�
�
�.
� C� ���00� �����
Renton Hill Utility Replacement Project
�
WTR-27-3824, WWP-27-3824, SWP-27-3824
Proposal & Combined Affidavit & Certificate Form
w
TO THE CITY OF RENTON
RENTON, WASHINGTON
�
Ladies and/or Gentlemen:
,�„ The undersigned hereby certify that the bidder has examined the site of the proposed work and have read
and thoroughly understand the plans, specifications and contract governing the work embraced in this
improvement, and the method by which payment will be made for said work, and hereby propose to
,,,� undertake and complete the work embraced in this improvement, or as much thereof as can be completed
with the money available, in accordance with the said plans, specifications and contract and the schedule
of prices.
�w
The undersigned further certifies and agrees to the following provisions:
�
NON-COLLUSION AFFIDAVIT
�
Being duly sworn, deposes and says, that he is the identical person who submitted the foregoing proposal
or bid, and that such bid is genuine and not sham or collusive or made in the interest or on behalf of any
r
person not therein named, and further, that the deponent has not directly induced or solicited any other
Bidder on the foregoing work or equipment to put in a sham bid, or any other person or corporation to
refrain from bidding, and that deponent has not in any manner sought by collusion to secure to himself or
.rr
to any other person any advantage over other Bidder or Bidders.
AND
�
CERTIFICATION RE: ASSIGNMENT OF
rr�
ANTI-TRUST CLAIMS TO PURCHASER
Vendor and purchaser recognize that in actual economic practice overcharges resulting from anti-trust
violations are in fact usually borne by the purchaser. Therefore, vendor hereby assigns to purchaser any
�r and all claims for such over-charges as to goods and materials purchased in connection with this order or
contract, except as to overcharges resulting from anti-trust violations commencing after the date of the
bid, quotation, or other event establishing the price under this order or contract. In addition, vendor
� warrants and represents that such of his suppliers and subcontractors shall assign any and all such claims to
purchaser, subject to the aforementioned exception.
� AND
�
wr
rr
+rr
MINIMUM WAGE AFFIDAVIT FORM
I, the undersigned, having been duly sworn, deposed, say and certify that in connection with the
,� performance of the work of this project, I will pay each classification of laborer, workman, or mechanic
employed in the performance of such work; not less than the prevailing rate of wage or not less than the
minimum rate of wages as specified in the principal contract.
�
I have read the above and foregoing statements and certificate, know the contents thereof and the
substance as set forth therein is true to my knowledge and belief.
°1� FOR: PROPOSAL, NON COLIUSION AFFIDAVIT, ASSIGNMENT OF ANTI-TRUST CLAIMS TO PURCHASER
AND MINIMUM WAGE AFFIDAVIT
�r
.� 1 11'1 C .
Name of Bidder's Firm
�
-�
Signature of Authorized Representative of Bidder*:
+r t _
Printed Name: �.Jl,'l�� ��.�L/ le;
,�r Address: �`�ll� ��� �fC�'� �����1� ��� � ���� "I�Z"I�
Contact Name (please print): � �Q��� L��e�
� Phone: 2�' �. )�� - ���� Email: � � �5��� �-��
� ��
*The above signature must be notarized using the applicable notary language found on pages 3 and 4.
�
!f business is a CORPORATION,please complete this section:
�r
Name of President of Corporation �� �"" _(^,�,� J
,j,�, Name of Secretary of Corporation _�Y�-}-� ���(��
Corporation Organized under the laws of ��5�;�'��
wr
With Main Office in State of Washington at ��/�`�(�m���
wr Jf business is a PARTNERSHIP or LIMITED LIABILITY COMPANV,please complete this section:
Name: Title(Partner, Member, Manager):
�
r
Proposal&A�davit/Certificate-Page 2 of 4
�r
08_COMBINED PROP and TRIPLE FORM W-3824.doc
�Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
+r
�
INDIVIDUAL FORM
STATE OF WASHINGTON )
�
: ss
County of )
� On this day of before me personally appeared to
me known to be the individuai(s) described in and who executed the foregoing instrument, and
�r
acknowledged under aath that (he/she/they) signed and sealed the same as
(his, her, their) free and voluntary act and deed, for the uses and
purposes therein mentioned.
'� GIVEN under my hand and official seal the day and year last above written.
(SEAL)
"�' Notary Public in and for the State of
Washington, residing at
Print Name:
�
My commission expires:
�r
+�r
CORPORATION FORM
STATE OF WASHINGTON )
�
: ss
County of � �h )
`� On this ��� day of �� before me personally appeared ��1�1�1 �-(.L.iijlE', to
me known to be the V1CP, ��-- (President, Secretary, Treasurer� of the cor oration
p
�.
that executed the foregoing instrument, and acknowledged said instrument to be the free and
voluntary act and deed of said corporation, for the uses and purposes therein mentioned, and on
oath stated that�_ (he/she/they) are authorized to execute said instrument.
'�" GIVEN under my hand and official seal the day and year last above written.
(SEAL) _, ,��
�"' otary Public in and for the State of
��`���`R A S I������i
�.�`��GM�asio���5'�;'�.� Washington, residing at��h-CYYltS�-. �1�15�
� �.•'� �"A• �. Print Name: �.y1y�C�mL� S,C..l�1
�= o .• �
w� ��.'O��TARy9N:2=
' �� .e►�r.- :*=
_'�� — My commission expires:�(�'1 �p ���
�c!►� pUB1.�G o :2� �
tl� ��/9J'�9NU'�AY 06�2���j�O�``
i���F�;�ASN`C�\�� Proposal&Affidavit/Certificate-Page 3 of 4
�
08_COMBINED PROP and TRIPLE FORM W-3$24.doc
�Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
�
�
PARTNERSHIP FORM
STATE OF WASHINGTON )
: ss
`�' County of )
� On this day of before me personally appeared to
me known to be a General Partner of the partnership known as that
executed the foregoing instrument, and acknowledged said instrument to be the free and
,,,�, voluntary act and deed of said partnership, for the uses and purposes therein mentioned, and on
oath stated that _ (he/she/they) are authorized to execute said instrument.
„�, GIVEN under my hand and official seal the day and year last above written.
(SEAL)
� Notary Public in and for the State of
Washington, residing at
Print Name:
�
My commission expires:
�..
� LIMITED LIABILITY COMPANY(LLC) FORM
STATE OF WASHINGTON )
"" : ss
County of )
�
On this day of , 20 , before me personally appeared
to me known to be a Managing Member of the Limited Liability
„�, Company known as and that he/she/they executed the
foregoing instrument, and acknowledged said instrument to be the free and voluntary act and
deed of said Limited Liability Company, for the uses and purposes therein mentioned, and on oath
+rr stated that (he/she/they) are authorized to execute said instrument.
GIVEN under my hand and official seal the day and year last above written.
�r.
(SEAL)
Notary Public in and for the State of
,r,r Washington, residing at
Print Name:
� My commission expires:
Proposal&Affidavit/Certificate-Page 4 of 4
�
08 COMBINED PROP and TRIPLE FORM W-3824.doc
�
�
+�r
Department of Labor and industries
�, Certificate of Registration
,� Nameon Registration: �S�I� t,�;r'1CI('���/�;L(,,(�(,'� � �j/�.-�WL�/�,�, (f'�C �
Registration Number: .L,t-\JEI�UC���I—C��
� Expiration Date: '� I � I 2-���
Note: A copy of the certificate will be requested as part of contract execution when project
+�r
is awarded.
�
.r
�
�
�
wr
�
�
�
�
�
�
09_L&[REGISTRATION W-3R24.dc>c\
�Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
�
�
,�.,�,�...
�1s •�""a'
.,�,,�_ _..<)�
.,��"�� +3 � �'�'
4�
��.=� r''=- P�"C3�CC�Sc�� ��{� �C?E�t�
� ,��J������.
: �
�t�t�uv��� r��t� �v 7��s���;�s�t��s,�r,�t�ve,[�ontr�c�or] Laser Underground&Earthworks, Inc.
�r _._____._ _.__,..._.__._..__.___
Tn f����f,.��5� 20417 87th Avenue SE, Snohomish,WA 98296 �5��;��;���
____ _ ______ . __..__ ._.,.� �_
__. ��
�„r, and[�urety] RLI Insurance Compan�
a corpc�ratiQn duly�rganized un�er Che laws of th�^Stai�e of��� IlllnOis �� ,�
and authorized tc� de� busi��ess in the �iate r.�f 44��shingtr�n, �s Surety, are h€1d �nd t'lrmly bcrtsnd t�nta the fity uf
R�ntczn iea#,��>am nf fi�e{S}��:rc�nt c�f the tot�,l amounl e�f�Cl�e 6id�re��t�sa1 of seid Rrincip�l fc�r thf>�vnrk h�re{na�t�r
� descr�ik;e�, fnr ;f�e �,�yn�ent c�f urhEich, well and truly to be madc�, �n+e kr�nd r�ursclw�s, our heirs, execu�ar�,
�dmir�istratc�rs anr�assi�ns,and succ�ss�ars and assi�ns,jaintly�nd severally,#irmly by�hese pres�r�ts.
�The�car�d3ti�n of this iac�nd is such,that wher�as the Principa!herein is h�rewitt�sut��riittir7�, hisJh�r or its
� s�aleci�ropc�sal far the follawin�hiqi�way canstr�;ctic�r�,to wit:
_,_.__..._._____._ Renton HiI1 Utititv Replacement
�' saic�bid and propc�sal,t�y referente theretc�,b�ing rnacie a part hereof.
NJVv',7NERE�UR£,if the sasd proposal bid by said Princ+pal t�e accepted,and th�r.r�ntract be a�vvardect to
� sai� Princip�l, dnd if said f'rincipai sha61 duly rnake ar�d er�ter irtta anc� ex�cute said cantract and shal( furnish
performance hond �s required by the Gity of Renton v�ithin a perirsd af ten (10) days from and aft�r s�id aa�ard,
exclusiue of the day of sueh�ward,then this ok�ligatic�n 5h�ll be null ar7d voitf,otherwiae it shall remai��nd t�e in fuil
fo�ce and effect.
a� iN i�H� EVENT th� Principal, following award, fails to execute an A�rY�rnent witt7 tf�e City aP Renton in
accorc#ance w[[h th� t�rrns o#the Propc�sal and furnish a perFormance bond with Sur�ty nr Suz-eties approved by
the �ity c�f� t2entor� u�ithir� ten (�4) days frorn �nd after said award,then Principal shali farfelt the eid Bondf Bid
Frapa�al ��pa5it or Surety chall'tmn�ediately pay and far#eit to the City of Ftent�n the�mz�unt of�Che�'roposa! Bsd
'� Bor�d,�s set icarth in RCW 3`_',,�.�3(1.200 ar�d RCW 35,23.352.
1N TESTIMC3NY WNERE�F,the Principal and 5urety have ca�is�d thes� presents to be si ned anci sealed
�, ��„s 15th �day Q� September 20�7
Laser Underg'round&Earthworks, Inc. RLI Insurance Company
(Princ' ._ _..�.�. (Sur� ._
� `/"1 �,�'/
�..�.-'__ _ __
� � a ized official) (Sign�tur�of�utharized afficialJ
� e �y. Matt Niehl
� ..� �_ ____
(7itfej (Attorne}�-in-FacC]_
375 118th Ave SE, STE 103
(Address]
�` Bellevue,WA 98005
�
425-644-1600
� jTeiephone 14urnberJ
_____. .�._�....
+� Apprtiv�eJ t7y City Attorr��y
Px�c��.�.�;��:3 k<;s k;+a�wleier. ��x.c��hanqs,. ef 'rd�,, Fnc. Fc_- usa��•-, �.'aairjit:io�_ .�c,x�e�„F�aT se+� �u�:�w.rrxwra.r,.o;r; - Rl�w�<s15 4ex�if�r S;.;aI
� ,
�' � POWER OF ATTORNEY
R�I �c rc
snRllComp�ay RLI Insurance Company
,� 9025 N.Lindbergh Dr.�Peoria,IL 61615 Contractors Bondin and Insurance Com aR
Phone:(800)645-2402�Fa�c:(309)689-2036 g P y
Know All Men by These Presents:
�
That this Power of Attorney is not valid or in effect unless attached to the bond which it authorizes executed, but may be detached by the
approving officer if desired.
� That this Power of Attorney may be effective and given to either or both of RLI Insurance Company and Contractors Bonding and
Insurance Company,required for the applicable bond.
That RLI Insurance Company and/or Contractors Bonding and Insurance Company, each Illinois corporations (as applicable), each
I�r authorized and licensed to do business in all states and the District of Columbia do hereby make,constitute and appoint:
Garv J.Niehl,Matt Niehl,iointiv or severallv
�i
in the City of Bellewe , State of Washing,ton ,as Attorney in Fact,with full power and authority hereby
;�,r conferred upon him/her to sign, execute, acknowledge and delivPr far and on its behalf as Surety, in general, any and all bonds,
undertakings,and recognizances in an amount not to exceed Ten Million Dollars
( $10.000,000.00 )for any single obligation.
The acknowledgment and execution of such bond by the said Attorney in Fact shall be as binding upon this Company as if such bond had
� been executed and acknowledged by the regularly elected officers of this Company.
RLI Insurance Company and Contractors Bonding and Insurance Company, as applicable, have each further certified that the
� following is a true and exact copy of the Resolution adopted by the Board of Directors of each such corporation,and now in force,to-wit:
"All bonds, policies, undertakings, Powers of Attorney or other obligations of the Corporation shall be executed in the
corporate name of the Corporation by the President,Secretary,any Assistant Secretary,Treasurer,or any Vice President,or by
� such other ofticers as the Board of Directors may authorize. The President, any Vice President, Secretary, any Assistant
Secretary, or the Treasurer may appoint Attorneys in Fact or Agents who shall have authority to issue bonds, policies or
undertakings in the name of the Corporation. The corporate seal is not necessary for the validity of any bonds, policies,
undertakings,Powers of Attorney or other obligations of the Corporation. The signature of any such officer and the corporate
� seal may be printed by facsimile or other electronic image."
IN WITNESS WHEREOF,RLI Insurance Company and/or Contractors Bonding and Insurance Company,as applicable,have
caused these presents to be executed by its respective Vice President with its corporate seal affixed this 2n¢day of March,7.,,�L17.
�
`,OOa�u.IGAND:ti'`,,,/ ;,,.�JPpN�E'�o, �I Insurance Company
_ ' S9 ' .��5,.• " • .?,A'; Contractors Bonding and Insurance Company
:. q
� ;05:.`oPpORqrF•�.m/: =v�•p�pPOR�rF,��{": � �
=r' SEAL .•`,3= =� SEAL - � �'�
y°�' �,.2 • • Barton W.Davis Vice President
StateofIllinois l ••....• '• „ .•'
� I SS •.��trNo�s•• 'o��CINO�`'o�•
County of Peoria """'�����
CERTIFICATE
On this 2nd day of March , 2017 , I, the undersigned officer of RLI Insurance Company, and/or
� before me, a Notary Public, personally appeared Barton W. Davis Contractors Bonding and Insurance Company, each Illinois
who being by me duly sworn,acknowledged that he signed the above Power corporations, do hereby certify that the attached Power of Attorney is
of Attorney as the aforesaid of�icer of the RLI Insurance Company and/or in full force and effect and is irrevocable; and furthermore, that the
Contractors Bonding and Insurance Company, and acknowledged said Resolution of the Company as set forth in the Power of Attorney, is
instrument to be the voluntary act and deed of said corporation. now in force. In testimony whereof,I have hereunto set my hand and
� the seal of the RLI Insurance Company and/or Contractors
Bonding and Insurance Company this�r�day of e..,..}„TM�.er
_ �r�..._..,,
��
irri � RLI Insurance Company
Jacqu ine M.Bockler Notary Public Contractors on ing and Ins rance Company
.
i "OFFICIAL SEAL" �
�il� No�� Barton W.Davis Vice President
ar,ireoF: �ACQUELINE M, BOCKLER
�uHas' COMMISSION EXPIRES 0111M18
�, 4668841020212 A0059115
�
� CITY OF RENTON PUB�IC WORKS DEPARTMENT
RENTON Fi1LL UTILITY REPLACEt�NT
� 'Note Show price per unit in figures only. Figures written to the right of the dot(decimal)in the pnce per unit column shall be inierpreted as cents
SEE SECTION 1-09.14 OF THE SPECIAL PROVISIONS FOR INFORMATION ON BID ITEMS.
ITE ITEM 1MTH UNIT PRICED BID APPROX. UNtT PRICE TOTAL AAAOUNT
NO. QUANTIT1f �oi�ars cents Dollars Cents
�r
BID SCHEDULE A-STORM WATER
� A01 Mobilization&Demobilization 1 �����O. ��j ���O ,
Lump Sum Per Lump Sum
A02 Trench Safety Systems 1 3�}�Q(�Q.. �(� ,
irli tump Sum Per Lump Sum
A03 Construction Surveying. Staking,and As-Built Drawings 1 �C:�pbQ_ ^ l-'�.�,
�ump Sum Per Lump Sum
iYIY
A04 Temporary Traffic Control � �'2,a��, �1 .
Lump Sum Per Lump Sum
� A05 Stormwater Pollution Prevention and TESC Pian and ')(�'1 �y�� .7/t'� Oj'�/�1,
Impieme�ation 3 4�✓�LJ��f !_E..1 11l.l
Lump Sum Per Lump Sum
� A06 Landscape Restoration � �1 t��• oO� .
LUmp Sum Per Lump Sum
A07 Seiect imported Trench Backbli 5900 �_�� t � � ��`
�' Ton Per Ton
A08 Hot Mix Asphait Patch inciuding CSTC for Storm Trench 4600 �� � V��.J•
� Sq.Yard Per Sq.Yard
A09 Remove and Repiace Concrete Sidewalk and Driveway 125 � �� � 6� ��1
Sq. Y2fd Per Sq Yard
� A10 Remove and Replace Concrete Curb and Gutter 575 � � � �
.
Linear Foot Per Lirrear Foot
� A11 Replace Pavement Markings 1 ���-lo� � ��a .
�ump Sum Per Lump Sum
Al2 Removal and Repiacement of Unsuitable Foundation Materiai 15p � , �� l.� �
� Ton Per Ton
U�
A13 CCTV Inspection q775 . q � � •
Llfleet Foot Per Linear Foot
�
A14 Site Specific Utilily Potholing 20 �V� + t� �l��
EaCh Per Each
�
A15 Replace Survey Monument q Z���. � � � ,
Each Per Each
� A16 Stormwater Minor Changes 1 _�30,000.00 $30,000.00
Estimate Per Estir�te
1
A17 Resalution of Utility Conflicts with 5tormwater Force �20,OOO.DO $20,000.00
� Account PerForce Account
A18 Construction Geotextile for Separation 460 1 .
�� ���
� Sq. Yafd Per Sq Yard
'�Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
`� GITY OF RENTCIN PUBLIC WORKS DEPARTMENT
RENTON HILL UTILITY RWLACEMENT
`Note Show price per unit in figures oniy, Figures written to the right of the dot(decimal)in the price per unit column shall be interpreted as cents
� SEE SECTION 1-09.14 OF THE SPECIA�PROViSIONS FOR INFORMATION ON BID ITEMS.
ITE ITEM WITH UNIT PRICED BID APPROX. UNIT PRICE TOTAL AN�UNT
NO. QUANTITY r�oua�s cents Dollars Cents
r �,('�
A19 Storm Drain; 6-inch Diameter(CPEP) gp ���_ q C��,�l�
.
Linear Faot Per Linear Foot
�r A2D Storm Drain, 8-inch Diameter (CPEP) 2�5 ��� p�I � r'��Q�
Linear Foot Per Linear Foot
A2� Storm Drain, 8-inch Diameter(DI) 60 �� ���Q�v �
it� '
Llnear Foot Per Linear Foot
A22 Storm Drain, '12-inch Diameter {PPP) 4775 r � �(� � � rJJ�
� Linear Foot Per Linear Foot
A23 Storm Drain; 12-inch Diameter(DI) � ��� ,O�� �
Linear Foot Per Linear Foot
YIIII
A24 Trench Drain �09 4�� � ����
Linear Foot Per Li�ar Foot
� A25 Connect Existing Laterai to New Storm Pipe 5 ��' . `o, V�'
Each Per Each
A26 Connect New Storm Pipe to F�cisting Catch Basin g � � ����� �
�
Each Per Each
A27 Siorm Lateral Cleanout -6"or 8"Diameter � �j� � ,� ��Q �
� EaCh Per Each
A28 Catch Basin Type 1 4q �O� � —�����j�j�.
-�i---
Each Per Each
"� Y� � 3 a�, �,��� -
A29 Catch Basin T 1 L With S cial Frame and Grate
- E2Ch Per Each
+� A30 Catch Basin Type 2,48-inch Diameter 35 ���� I�� � �'���
Each Per Each
A31 ControiledDensityFili 2Q 1�� 1 �� �
�
Cu. Yafd Per Cu.Yard
A32 Sewer Service Reiocation for Stormwater Confiict g __���i i �����
� EaCh Per Each
A33 Abandon Existing Manhole 2 � , �O LJL�' ,
Each Per Each
�r
Total Schedule A � ���(� '� 'ry �
�
�
�r
�Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
'� CITY OF RENTON PUBLIC WORKS DEPARTMENT
RENTON HILL UTILITY REPLACEMENT
"Note 5how price per unit in fYgures only Figures written to the right of the dot(decimal)in the Fxice per unit column shail be interpreted as cents
� SEE SECTION 1-08.14 OF THE SPECIAL PROVISIONS FOR INFORMATION ON BID ITEMS.
ITE ITEM WITH UNIT PRICED BID APPROX. UNIT PRICE TOTAL AMOUNT
NO. QUANTITY �aiar� cents Dollars Cents
�
BID SCHEDULE B-WASTEWATER
wr B01 Mobilization 8�Demobilization � � ""������.
Lump Sum Per Lump Sum
B02 Trench Safety S�rstems 1 �JV�a�lJ• �-✓"�`�'��'
� �ump Sum Per Lump Sum
803 Construction Surveying; Staking,and As-Bui�t Drawings � O� � ��o�,
� Lump Sum Per Lump Sum
604 Temporary Traffic Control � ��. �` ���
Lump 5um Per Lump Sum
� �5 Stormwater Poliution Prevention and TESC Plan and 1 �� f�'��`��
Implementation ' �IAJ
Lump Sum Per Lump Sum�
+�' B06 Landscape Restoration � �(�(�� ��y �� �
-s--��
Lump Sum Per Lump Sum
0
B07 Select Imported Trench Backfill '15000 _�,Q '
�r —
Ton Per Ton
vJ ��� �1.��
B08 Hot Mix Asphait Patcn Including CSTG for Sewer Trench 4500 -s�. �
� Sq. Yard Per Sq.Yard
BD9 Remove and Replace Concrete Sidewalk and Driveway 30 a,'�,,,�, ���Q.
Sq Yard Per Sq Yard
�
B10 Remove and Replace Concrete Curb and Gutter g �. �� �
Linear FoOt Per Linear Foot
� B11 Replace Pavement Markings � ,�O •
Lump Sum Per Lump Sum
612 Removai and Replacement of Unsuitable Foundation Material 300 _�i _ �`I���1�
�
Tofl Per Ton
B13 CCTV Inspection g7p7 � , U� � ��.�-✓,
�yy Linear Foot Per Linear Foot
B14 Fumish and Install 8-inch PVC Sewer Pipe 3558 _�_ `C�� ���`��
Lineat Foot Per Linear Foot
� �Q�• �.��Q
B15 Furnish and install 8-inch HDPE Sewer Pipe 22 �
Linear Foot Per Linear Foot
'� B16 Fumish and Instali 10-inch PVC Sewer Pipe �qg q� � '�� "` I V .
LineBr FoOt Per Linear Foot
� B17 Furnish and Instail 6-inch PVC Side Sewer Pipe �262 � 1 lil.1 ����-!�
Linear Foot Per Linear Foot
�
+�Provided to Builders Exchange of wA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
� CITY OF RENTON PUBLIC WORKS DEPARTMENT
RENTON HILL UTILITY REPLACEMENT
"Note Show price p8r imit in figures only Figures written to the right of the dot(decimal)in the prrce per unit column shall be interpreted as cents
� SEE SECTION 1-09.14 OF THE SPECIAL PROVISIONS FOR INFORMATION ON BID ITEMS.
ITEM ITEM WITH UNIT PRlCED BID APPROX. UNIT PRICE TOTAL AIUIOUNT
NO. QUANTITY Dollars cents Dollars Cents
� %-f�� I20,0�
B18 Furnish and Install 4-inch or 6-inch CIPP Side Sewer Pipe �g ---��.�`'`.'' �
Each Per Each
w� B19 Fumish and Install Internal Sewer Drop in Existing Manhole � �� ������
EaCh Per Each
B20 Fumish and Instali Sanitary Sewer Manhole Extra Shaliow � ��� �VV`�•
� Each Per Each
B2� Fumish and Instaii 54-inch Diameter Shallow Sanitary Sewer 1 Z �{'�(`{�. ��' O� �
Manhole �A1
� Each Per Each
622 Fumish and Instail 54inch Diameter Sanitary Sewer Manhole g ���� ��' �l,�,LJ�.J .
Each Per Each
� Furnish and Instali 60-inch Diameter Sanitary Sewer Manhole j {� � ��� I'\f�,/'� �
B23 with Inside Drop � _�V _ lJl.1V
Each Per Each
+� B24 Fumish and Instail 8-inch Sewer Cleanout 1 V o• _ 'a �
EaCh Per Each
B25 Fumish and Instail 6-Inch Sewer and Cleanout in Easement � ���' �Z���
� Lump Sum Per Lump Sum
B26 Connect New Sewer to Existing Sewer Manhole 2 �O DO• �� '
� Each Per Each
B27 Pre-Installation Cleaning and Inspection for CIPP in Easement 152 `J ��J �lJ�.> '
Linear Foot Per Linear Foot
� t�� �1 IG��
B28 Fumish and InstaN 6-Inch Cured-in-Piace Pipe in Easement 152 � �
Linear Foot Per Linear Foot
'� B29 Side Sewers for 1006& 1012 High Ave S 2 3�Q�� � OV`✓�
Each Per Each
B30 Post-Installation Inspection of CIPP 152 ��• � ' i'C.J v l +
�ir - -
Linear Foot Per Linear Foot
� Schedule B I 1��� LI� ��
10%Sales Tax I L� ��1 `�
ilr /
�j �
Total Schedule B ����1� ' `� '
�
�
�11ti
� Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
� CITY OF RENTON PUBLIC WORKS DEPARTMENT
RENTON HILL UTILITY REPLACEMENT
"Note Show price per unit in flgures only, Figures written to the right of the dot(decimalj in the price per unit column shall be interpreted as ce�ts
� SEE SECTION 1-08.14 f?F THE SPECIAL PROVISIONS FOR INFORMATION ON BID ITEMS.
ITE ITEM WITH UNIT PRICED BID APPROX. UNIT PRICE TOTAL AMOUNT
NO. QUANTITY �aiars cencs Dollars Cents
�
BID SCHEDULE C-WATER
� C0� Mobilizetion, Demobilization, Site Preparation&Clean-up � ����, ��, l.'Vl.��
Lump Sum Per Lump Sum
CO2 Trench Safeiy Systems � ��Q � � ��� �
� Lump Sum Per Lump Sum
CO3 Construction Surveying, Staking,and As-Built Drawings � D �� ���L l.1..1 '
� Lump Sum Per Lump Sum
C04 Temporary Traffic Controi � i 2,��u� ,'ZGj �a� ,
Lump Sum Per Lump Sum
� C05 Stormwater Poilution Prevention and TESC Plan and � �(1Oo� ���� �
implementation ��� � �
Lump Sum Per Lump Sum
� CO6 �andscape Restoration � '�O� � o� �V'
Lump Sum Per Lump Sum
C07 Select Imported Trench Backfill 8200 � .`� ��U�, U�� '
�
Ton Per Ton
l�'��� � 1 �� ��
C08 Hot Mix Asphalt Patch Including CSTC for Water Trench 8300 �
� Square-Yafd Per Square-Yard
C09 Remove and Replace Concrete Sidewalk and Driveway 150 'Z J � _,.��� J� �_
Square-Yafd Per Square-Yard
� (� �j
C10 Remove and Replace Concrete Curb and Gutter 250 �l: . ' � I i��� �
Linear FOOt Per Linear Foot
� C1'I Replace Pavement Markings � ���� . 1 v�� `
Lump Sum Per Lump Sum
C12 Removal and Repiacement of Unsuitable Foundation Material 200 �� { �1.��.-' •
�
Ton PerTon
C13 Site Specific Utility Potholing �q ��� . .� �V� �
,� EaCh Per Each
C14 Replace Survey Monument g 2`� � �'"�� ,
Each Per Each
� Furnish and Instail 8"CI 52 DI Water Pipe& Fittings w/ � �,' n �� .
C15 polywrap 8660 �f'�
Linear Foot Per�near Foot
'� C16 Furnish and Instali 6"CI 52 DI Water Pipe&Fittings w/ 390 �� . �� , ��l�' .
Poiywrap
Linear Foot Per Linear Foot
C�� Furnish and instail 4"CI 52 DI Water Pipe&Fittings w/ (�� �
� Polywrap 4D0 �� ��` v
Linear Foot Per Linear Foot
�
�' Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
'�' CITY OF RENTON PUBLIC WORKS DEPARTMENT
RENTON HILL UTILITY REPLACEMENT
*Note Show price per unit in figures only. Figures written to the right of the dot(decimal)in the price per unit column shall be interpreted as cents
� SEE SEC710N 1-08.14 Of THE SPECIAL PROViSIONS FOR INFORMATION ON BID ITEMS.
ITE ITEM WITH UNIT PRICED BID APPROX. UNIT PRICE TOTAL AMOUNT
NO. QUANTITY oouars cer�s Doilars Cents
+rr F.�=�W
C18 Cut in 6"Gate Vaive Assembly � � �
Each Per Each
tilii► C19 Fumish and Install 8"Gate Valve Assembiy 51 ��� ► �� � � '
Each Per Each
C20 Furnish and Install 6"Gate Vaive Assembiy g �(�M1� �' lJ� !
� Each Per Each
C21 Fumish and Instali 4"Gate Valve Assembly � �O� ���_
� Each Per Each
C22 Concrete for Thrust Blocking, Dead-Man Anchor Blocks 102 'r/�' � 1 Ql�� F
Cubic Yard Per Cubic Yard
�
C23 Furnish and install Rre Hydrant Assembly �q �� ��
Each Per Each
r�w C24 Fumish&Install 1"Water Service Con�ection 165 �LlO� ��� �� �
Each Per Each
C25 Fumish&Instali Air Release and Vacuum Valve Assembly 1 —�../SJ�I�� �JVIJv •
� Each Per Each
C26 Gonnection to Existing Watet Main 2� ���,J ` O ,
,� EaCh Per Each
C27 Cut, Cap, and Biock Existing Water Main g ���� � ��L.I.J�,> '
Each Per Each
� ` + ,,(�,
C28 Furnish and Install'10"AWWA C900 Sewer Pipe 16 1 Q� � � lUI..J b .
�ineaf FOOt Per Linear Foot
V�
Subtotal �y��
Schedule C ' ��� �lJlf•u
� 10°lo Sales Tax t Lr� �l(/� ��J
� Tota)Schedule C � ��� ��11,C
W�V �
BID TOTAL ' ��V 1��� �$
� (Total Schedufes A,B,and C)
�
i�ti1
'�+Provided to Builders Exchange of WA, Inc. For usage Conditions Agreement see www.bxwa.com - Always Verify Scal
.
�v BOND #RCB0004488
��ND TO THE CiTY OF RENTON
�
KNQW�tl.l MEN BY THESE PftESENTS:
1 hat we,the undersigned Laser Underground&Earthworks, Inc.
� as principal, and RLI Insurance Company
corpc�ration organized and existing under the faws of the 5tate c�f Illinois �5 �
surety corparatian, and qualified under the {aws of the State of Washington to become surety upc�n
� bands af cantractors with rnuntcipat corporatians,as surety are jQintiy and severally held and firmly
bound t,�fihe City of Renton in the pena(sum of $5,048,703.20 for the payment of
wi�ici�sum on demand we bind ourselves and our successors, heirs, administrators ar persnn
"'�' representatives,as the eas�may be.
This ohligation is entered into in pursuance of the statutes of th�State of Washington,the Ordinance of
+� the City of Renton.
Dated at Bellevue , Washingtan,this 18th day ofi October 20 1'7
�
Nevertheiess,the conditions of the above obiigation are such that:
WHEREAS, under and pursuant to Public Works Canstruction Cantract CAG-17-174 prc�viding for
"'� constructian of Rentan Nill Utility Replacement Prolect,the principal is required to furnish a bond for
Che faithfu! performance of the con#ract; and
""� WHEFtEAS,the principal has atcepted, or is about to accept,the contract, and undertake to perform the
wark therein provided for in the manner and within the tirne set farth;
rrr � NOW,TMEREFORE, if the principal shail faithfully perform all of the provisions of said cor�tract in th�
manner and within the time therein set forth,or within such extensions af time as may be�;ranted
under said contr�ct,and shal( pay al3 laborers,mechanics,subcantractors and rnaterial men, and aIl
„�, persc�ns who shall supply said principal or subcantractors with provisions and supplies for the carrying
on of said work,and shall hold said City of Rentan harmiess from any loss or damage accasioned to any
person or property by reasan af any carelessness or negligence an the part af said principal, or any
� subcontractor In the performance af said work, and si�aii indemnify and hold the City af Renton
harmiess from any damage or expense by reasan of failure of performance as specified in the contract
or frnm defeets appearing ar developEng in the materiai or workmanship provided ar performed under
� the contract within a periad of one year after its aCceptanc2 thereaf by the City of Renton,then and in
that event this obligation shail be void; but otherwise it shall be and remain in full farce and eff�ct.
,,,, Laser Underground&Earthworks, Inc. RLI Insurance Company
Principai Surety __ __
�r /���,/4 �
SignaLure " S�gnature Matt iehl � � � ��
rrr _
4 ������-� Power of Attorney _
�
Titfe � Titie
�
�
`�• � � POWER OF ATTORNEY
RLI c �c
onRllComptrty RLI Insurance Company
j� 9025 N.Lindbergh Dr.�Peoria,�L 6�6�s Contractors Bondin and Insurance Com an
Phone:(800)645-2402�F�:(309)689-2036 g P y
� Know All Men by These Presents:
That this Power of Attorney is not valid or in effect unless attached to the bond which it authorizes executed, but may be detached by the
approving officer if desired.
� That this Power of Attorney may be effective and given to either or both of RLI Insurance Company and Contractors Bonding and
Insurance Company,reyuired for the applicable bond.
That RLI Insurance Company and/or Contractors Bonding and Insurance Company,each Illinois corporations (as applicable), each
� authorized and licensed to do business in all states and the District of Columbia do hereby make,constitute and appoint:
Gary J.Niehl,Matt Niehl,iointiv or severallv
� --
in the City of Bellevue , State of Washineton ,as Attorney in Fact,with full power and authority hereby
■r conferred upon him/her to sign, execute, acknowledge and deliver for and on its behalf as Surety, in general, any and all bonds,
undertakings,and recognizances in an amount not to exceed Ten Million Dollars
( $10,000,000.00 )for any single obligation.
� The acknowledgment and execution of such bond by the said Attorney in Fact shall be as binding upon this Company as if such bond had
been executed and acknowledged by the regularly elected officers of this Company.
RLI Insurance Company and Contractors Bonding and Insurance Company, as applicable, have each further certified that the
;� following is a true and exact copy of the Resolution adopted by the Board of Directors of each such corporation,and now in force,to-wit:
"All bonds, policies, undertakings, Powers of Attorney or other obligations of the Corporation shall be executed in the
corporate name of the Corporation by the President,Secretary,any Assistant Secretary,Treasurer,or any Vice President,or by
� such other officers as the Board of Directors may authorize. The President, any Vice President, Secretary, any Assistant
Secretary, or the Treasurer may appoint Attorneys in Fact or Agents who shall have authority to issue bonds, policies or
undertakings in the name of the Corporation. The corporate seal is not necessary for the validity of any bonds, policies,
undertakings,Powers of Attorney or other obligations of the Corporation. The signature of any such ofticer and the corporate
� seal may be printed by facsimile or other electronic image."
IN WITNESS WHEREOF,RLI Insurance Company and/or Contractors Bonding and Insurance Company,as applicable,have
caused these presents to be executed by its respective Vice President with its corporate seal affixed this Z day of Se t m r,2Q17.
�
",,,"",,,,,� ,",,,""",,,,� RLI Insurance Company
. :�.pap\NG AND/q,s''•i,. .���o�JPpNCE�o�
;,y.,•'PPORq•.G9�;' `�`�a�,• PPOR •.?s,;-.; Contractors Bonding and Insurance Company
� `�: �� rF�•m: =�;� G� ArF•:�'. ii/� .�I
c /�/
=6'� SEAL .',a= : SEAL ' - �.� "•
State of Illinois �'Z�`' ' �T=' •. .• Barton W.Davis Vice President
� � SS ��L�No�s ��C 1 N��S�
County of Peoria J ' " "
CERTIFICATE
On this 7th day of Seotember 2017 , I, the undersigned officer of RLI Insurance Company, and/or
� before me, a Notary Public, personally appeared Barton W. Davis Contractors Bonding and Insurance Company, each Illinois
who being by me duly sworn,acknowledged that he signed the above Power corporations, do hereby certify that the attached Power of Attorney is
of Attorney as the aforesaid officer of the RLI Insurance Company and/or in full force and effect and is irrevocable; and furthermore, that the
Contractors Bonding and Insurance Company, and acknowledged said Resolution of the Company as set forth in the Power of Attorney, is
instrument to be the voluntary act and deed of said corporation. now in force. In testimony whereof,I have hereunto set my hand and
� the seal of the RLI Insurance Company and/ar Contractors
Bonding and Insurance Company this�_day of��
��'
�r ����rjv�, � G�� RLI Insurance Company
Gretchen L.Johnigk Notary Public Contractors on mg and Ins rance Company
� �- .
� �� GRETCHEN L JOHNIGK
NOTARV Barton W.Davis Vice President
auauc� "OFFICIAL SEAL"
smreoF� M Commission ires
auNo�s' Y �P�
�� Mey28,202a 4668841020212 A005911$
�
�
.�----
�
-- ° C����0� ���
CITY OF RENTON
FAIR PRACTICES POLICY
,,,,, AFFIDAVIT OF COMPLIANCE
��� I� �.�1.. � �, l,l�L�--S �f'�(�iereby confirms and declares that:
'� (Name of contractor/su ontractor/consultant)
I. It is the policy of the above-named contractor/subcontractor/consultant, to offer equal
�
opportunity to all qualified employees and applicants for employment without regard to their
�
race; religion/creed; national origin; ancestry; sex; the presence of a physical, sensory, or mental
�rr
disability; age over 40; sexual orientation or gender identity; pregnancy; HIV/AIDS and Hepatitis C
status; use of a guide dog/service animal; marital status; parental/family status; military status;
�
or veteran's status.
"�' II. The above-named contractor/subcontractor/consultant complies with all applicable federal,
state and local laws governing non-discrimination in employment.
�
III. When applicable,the above-named contractor/subcontractor/consultant will seek out and
�
negotiate with minority and women contractors for the award of subcontracts.
� l.��l �� �� �.J
Print Agent/Representative's Name
w�r
��S�de�rl-�--
Print Age Represe ative's Title
�
�
Agent/Representative's Signature
�l:fit��� 2� � �2--t���--
err Date Signed
+� Instructions: This document MUST be completed by each contractor, subcontractor, consultant and/or
supplier. Include or attach this document(s) with the contract.
�rr
.r
� CITY OF
__.� '�
��� �� �
AGREEMENT
CONTRACT N0. CAG-17-174
�Z.�
THIS AGREEMENT, made and entered into this�day of , 2017 by and between the CITY OF
RENTON, Washington, a municipal corporation of the State of Washington, hereinafter referred to as "City" and [Enter
Contractor name], hereinafter referred to as "Contractor."
Now,therefore the parties agree as foilows:
1. Agreement. This agreement incorporates the foilowing documents as if fully set forth herein: the 2016 Standard
Specifications for Road, Bridge, and Municipal Construction, as prepared by the Washington State Department of
Transportation and the Washington State Chapter of the American Public Works Association, including all
published amendments issued by those organizations ("Standard Specifications"); the City's Contract Bid
Documents for the Project, including but not limited to Addenda, Proposal Form, Special Provisions, Contract
Plans, and Amendments to the Standard Specifications; Contractor's Proposal and all documents submitted
therewith in response to the City's Call for Bids Documents; and any additional documents referenced as
comprising the Contract and Contract Documents in Section 1-04.2 of the Standard Specifications, as revised by
the Amendments and Special Provisions included with the City's Call for Bids and Contract Documents.
2. Project. Contractor shall complete all work and furnish all labor, tools, materials, and equipment for the project
entitled [Enter Project name], [Enter Project number], including all changes to the Work and force account work,
in accordance with the Contract Documents, as described in Section 1-04.2 of the Special Provisions.
3. Payments. City shall pay Contractor at the unit and lump sum prices, and by force account as specified in the
Proposal according to the Contract Documents as to time, manner, and condition of payment in a contract amount
not to exceed $5,048,703.20, unless modified by an approved change order or addendum. The payments to
Contractor include the costs for all labor,tools, materials and equipment for the Work.
4. Completion Date. Contract time shall commence upon City's Notice to Proceed to Contractor. The Work under
this Agreement shall be completed within the time specified in the Contract Bid Documents. If the Physical Work
under this Agreement is not completed within the time specified, Contractor shall pay liquidated damages and all
engineering inspection and supervision costs to City as specified in the Contract Bid Documents.
5. Attorney's Fees. In the event litigation is commenced to enforce this Agreement, the prevailing party shall be
entitled to recover its costs, including reasonable attorney's and expert witness fees.
6. Disclaimer. No liability of Contractor shall attach to City by reason of entering into this Agreement, except as
expressly provided in this Agreement.
7. Counterparts. This Agreement is executed in two (2) identical counterparts, by the parties, each of which shall for
all purposes be deemed an original.
Formal Bid Contrect Template 9-5-17 clb
IN WITNESS WHEREOF,the City has caused these presents to be signed by its Mayor and attested by its City Clerk and
the Contractor has hereunto set his hand and seal the day and year first above-written.
CONTRACTO • CITY OF REMTON:
re Partner/Owner Denis Law, ayor
ATTEST \���������u����►ep��
,,,,.�`��y�,F,��R�E�N,TD,y�,,,,
� n � , � ,� � �%, ;
C �%���.�KD��!.�Yl l.�lJ��_�.� f = =
Secretary �;��'�� ���y- son Seth, ity le^ .k ; � : =
I Z ' r �- _
e ' �,��'''. .``� �go`
�'�,,��pR���hinn������`�Q,��\�`:
FIRM INFORMATION ����y��dRptEp 5��.�`��
d/b/a Laser Underground & Earthworks, Inc.
CHECK ONE: ❑ Limited Liability Company ❑ Partnership � Corporation
STATE OF INCORPORATION: Washington
CONTRACTOR CONTACT INFORMATION: CITY CONTACT INFORMATION:
City of Renton
20417—87TH Ave SE 1055 South Grady Way
Snohomish,WA 98296 Renton, WA 98057
206-235-3052 John Hobson
Jason@laserug.com jhobson@rentonwa.gov
Attention:
If business is a CORPORATION, the name of the corporation should be listed in full and both the President and Secretary must sign
the contract. OR, if one signature is permitted by corporation by-laws, a copy of the by-laws shall be furnished to the City and made
a part of the contract document.
If the business is a PARTNERSHIP, the full name of each partner should be listed followed by d/b/a (doing business as) and firm or
trade name. Any one partner may sign the contract.
If the business is an limited Liability Company,an authorized managing member or manager must sign followed by his/her title.
Renton Hiil Utility Replacement CAG-17-174 � ; � �
'',��°
Formal Bid Contract Tempiate 9-5-17 clb
' �
:, `
�
� PREVAILING MINIMUM
�- HOURLY WAGE RATES
..
_
�
_
�
-
w
`
�
■r
M!
�
�
�
� WASHINGTON STATE PREVAILING WAGE RATES
FOR PUBLIC WORKS CONTRACTS
�
REFERENCE
�
�
The State of Washington Prevailing Wage Rates applicable for this public works contract, which is
located in _Kin�_County, may be found at the following website address of the Department of Labor
.r
and Industries: https://fortress.wa.�ov/Ini/wa el�kup/prvWa elg ookup.as� .
Check with the Department of Labor and Industries for any questions regarding Prevailing Wage
.r
Rates, and for a copy of all trade classifications.
�rr
Based on the bid submittal deadline for this project, the applicable effective date for prevailing wages
for this project is_September l, 2017 .
+r�r —
'� A copy of the applicable prevailing wages rates is also available for viewing at the office of the
Owner, located at_Renton City Hall, 1055 South Grady Wa,y, Renton, Washin�t,on.
"""' Upon request,the Owner will mail a hard copy of the applicable prevailing wage rates for this project.
�r
The State of Washington "Statement of Intent to Pay Prevailing Wages—Public Works Contract"may
be found at the following website http://Ini.wa.gov/FormPub/Detail.asp?DocID=1918 .
�r
The State of Washington "Affidavit of Wages Paid—Public Works Contract and Instructions" may be
found at the following website htt�//Ini.wa.gov/FormPub/Detail.asp?DocID=1909 .
�
�r
�
Irr
�rtr
24a-State Prevailing Wages Reference.doc\
�
r.
r
r.
�` SPECIAL PROVISIONS
..
-
r
�
�
�
�
�.
�
s
�
w
s
�.
v
�r
�" SPECIAL PROVISIONS............................................................................................................14
1-01 DEFINITIONS AND TERMS............................................................................................14
r" 1-01.1 General ..................................................14
..................................................................
1-01.3 Definitions...............................................................................................................14
'�"' 1-02 BID PROCEDURES AND CONDITIONS............................................................................17
1-02.1 Prequalification of bidders.......................................................................................17
+� 1-02.2 Plans and Specifications...........................................................................................17
1-02.5 Proposal Forms........................................................................................................17
�.r 1-02.6 Preparation of Proposal ...........................................................................................18
1-02.6(1) Proprietary Information.......................................................................................18
,�► 1-02.7 Bid Deposit..............................................................................................................18
1-02.9 Delivery of Proposal.................................................................................................19
:,,� 1-02.12 Public Opening of Proposals...................................................................................19
1-02.13 Irregular Proposals.................................................................................................19
� 1-02.14 Disqualification of Bidders......................................................................................19
1-02.15 Pre Award Information...........................................................................................20
�
1-03 AWARD AND EXECUTION OF CONTRACT......................................................................20
1-03.1 Consideration of bids...............................................................................................20
1-03.2 Award of Contract....................................................................................................20
w
1-03.3 Execution of Contract...............................................................................................20
1-03.4 Contract Bond..........................................................................................................21
�
1-03.7 Judicial Review ........................................................................................................21
1-04 SCOPE OF WORK.........................................................................................................22
�
1-04.2 Coordination of Contract Documents........................................................................22
1-04.3 Contractor-Discovered Discrepancies........................................................................22
�
1-04.4 Changes...................................................................................................................22
1-04.8 Progress Estimates and Payments.............................................................................22
'�" 1-04.11 Final Cleanup
.........................................................................................................23
1-05 CONTROL OF WORK....................................................................................................23
"'�' 1-05.4 Conformity With and Deviation from Plans and Stakes..............................................23
1-05.4(3) Contractor Supplied Surveying.............................................................................24
�"' 1-05.4(4) Contractor Provided As-Built Information.............................................................24
1-05.7 Removal of Defective and Unauthorized Work..........................................................25
iirr
1
�
<.�:
1�
1-05.10 Guarantees............................................................................................................26 �
1-05.11 Finallnspection......................................................................................................26
1-05.11(1) Substantial Completion Date..............................................................................26 �
1-05.11(2) Final Inspection and Physical Completion Date ...................................................27
1-05.11(3) Operational Testing............................................................................................27 '„
�
1-05.12 Final Acceptance....................................................................................................28
1-05.13 Superintendents, Labor and Equipment of Contractor.............................................28 "
�
1-05.14 Cooperation with Other Contractors.......................................................................28
a
1-05.16 Water and Power...................................................................................................28 ;
�
1-05.17 Oral Agreements....................................................................................................28
1-05.18 Contractor's Daily Diary..........................................................................................29 `
�
1-06 CONTROL OF MATERIAL..............................................................................................30
1-06.1 Approval of Materials Prior to Use............................................................................30 `
1-06.2(1) Samples and Tests for Acceptance........................................................................30
�
1-06.2(2) Statistical Evaluation of Materials for Acceptance.................................................30 y
1-07 LEGAL RELATIONS AND RESPONSIBILITIES TO THE PUBLIC............................................30 �
1-07.1 Laws to be Observed................................................................................................30
1-07.2 State Sales Tax .........31 �
................................................................................................
1-07.2(1) General ...............................................................................................................31
1-07.2(2) State Sales Tax-Rule 171 ....................................................................................31 �
1-07.2(3) State Sales Tax-Rule 170....................................................................................32
1-07.2(4) Services...............................................................................................................32 wr
1-07.6 Permits and Licenses................................................................................................32 ,
1-07.9 Wages .....................................................................................................................33 �
1-07.9(5) Required Documents ...........................................................................................33
1-07.11 Requirements for Non-Discrimination.....................................................................33 ,�
1-07.11(11) City of Renton Affidavit of Compliance..............................................................33
1-07.12 Federal Agency Inspection......................................................................................33 �
1-07.13 Contractor's Responsibility for Work.......................................................................34
1-07.13(1) General..............................................................................................................34 �
1-07.15 Temporary Water Pollution/Erosion Control............................................................34
1-07.16 Protection and Restoration of Property...................................................................36 �
1-07.16(1) Private/Public Property......................................................................................36
r�Y
2
�
wrr
� 1-07.17 Utilities and Similar Facilities..................................................................................37
1-07.17(1) Site Speci�c Potholing........................................................................................38
rwr 1-07.17(3) Interruption of Services......................................................................................39
1-07.17(4) Resolution of Utility Conflicts...............................................................................39
„�, 1-07.18 Public Liability and Property Damage Insurance......................................................39
1-07.18(1) General..............................................................................................................39
� 1-07.18(2) Coverages..........................................................................................................40
1-07.18(3) Limits ................................................................................................................41
ar�
1-07.18(4) Evidence of Insurance: .......................................................................................42
1-07.22 Use of Explosives ...................................................................................................42
1-07.23 Public Convenience and Safety...............................................................................43
.r
1-07.23(1) Construction Under Traffic .................................................................................43
1-07.23(2) Construction and Maintenance of Detours..........................................................44
�
1-07.24 Rights of Way.........................................................................................................44
1-07.28 Confined Space Entry.............................................................................................45
ara
1-08 PROSECUTION AND PROGRESS....................................................................................46
1-08.0 Preliminary Matters.................................................................................................46
�
1-08.0(1) Preconstruction Conference.................................................................................46
1-08.0(2) Hours of Work.....................................................................................................47
""� 1-08.0(3) Reimbursement for Overtime Work of Contracting Agency Employees..................47
1-08.1 Subcontracting.........................................................................................................47
'wr' 1-08.2 Assignment..............................................................................................................48
1-08.3 Progress Schedule....................................................................................................48
"�' 1-08.4 Notice to Proceed and Prosecution of the Work........................................................49
1-08.5 Time For Completion................................................................................................49
+� 1-08.6 Suspension of Work.................................................................................................51
1-08.7 Maintenance During Suspension ..............................................................................51
�r► 1-08.9 Liquidated Damages.................................................................................................51
1-08.11 Contractor's Plant and Equipment..........................................................................51
,�rn 1-08.12 Attention to Work..................................................................................................52
1-09 MEASUREMENT AND PAYMENT...................................................................................52
„r, 1-09.1 Measurement of Quantities.....................................................................................52
1-09.3 Scope of Payment....................................................................................................53
�rr
3
�rr
�
1-09.6 Force Account..........................................................................................................53 ,�
1-09.7 Mobilization ............................................................................................................53
1-09.9 Payments.................................................................................................................54 ,�r�i,
1-09.9(1) Retainage............................................................................................................55
1-09.9(2) Contracting Agency's Right to Withhold and Disburse Certain Amounts.................55 �
1-09.9(3) Final Payment......................................................................................................56
1-09.11 Disputes and Claims................................................................................................57 �
1-09.11(2) Claims ...............................................................................................................57
1-09.11(3) Time Limitations and Jurisdiction .......................................................................57
�
1-09.13 Claims and Resolutions...........................................................................................57
1-09.13(3) Claims$250,000 or Less .....................................................................................57 ;
�
1-09.13(3jA AdministrationofArbitration...........................................................................57
1-09.13(3)B Procedures to Pursue Arbitration .....................................................................57 '�
�
1-09.14 Payment Schedule..................................................................................................59
1-09.14(1) Scope ................................................................................................................59
�r�t
1-09.14(2) Bid Items...........................................................................................................59
1-10 TEMPORARY TRAFFIC CONTROL..................................................................................93
1-10.1 General....................................................................................................................93
�
1-10.2(1)B Traffic Control Supervisor...................................................................................94 'd
1-10.2(2) Traffic Control Plans.............................................................................................94 'rr
1-10.3 Flagging,Signs,and All Other Traffic Control Devices.................................................94
1-10.3(3) Construction Signs...............................................................................................94
�
1-10.4 Measurement..........................................................................................................94
1-10.5 Payment..................................................................................................................95 +�
1-11 RENTON SURVEYING STANDARDS................................................................................95 <:
1-11.1(i) Responsibility for surveys.....................................................................................95 �
1-11.1(2) Survey Datum and Precision.................................................................................95
1-11.1(3) Subdivision Information.......................................................................................95 ,w�
1-11.1(4) Field Notes..........................................................................................................96
1-11.1(5) Corners and Monuments......................................................................................96 �,
1-11.1(6) Control or Base Line Survey..................................................................................96
1-11.1(7) Precision Levels ...................................................................................................97 �
1-11.1(8) Radial and Station--Offset Topography................................................................97
�
4
�
w�+
+� 1-11.1(9) Radial Topography...............................................................................................97
1-11.1(10) Station--Offset Topography................................................................................97
�rs 1-11.1(11) As-Built Suroey..................................................................................................97
1-11.1(12) Monument Setting and Referencing...................................................................98
,w� 1-11.12 Materials..............................................................................................................98
1-11.12(1) Property/Lot Corners.........................................................................................98
� 1-11.12(2) Monuments.......................................................................................................98
1-11.12(3) Monument Case and Cover................................................................................98
�.
2-01 CLEARING,GRUBBING,AND ROADSIDE CLEANUP........................................................98
2-01.1 Description..............................................................................................................98
�
2-01.2 Disposal of Usable Material and Debris.....................................................................99
2-01.5 Payment..................................................................................................................99
2-02 REMOVAL OF STRUCTURE AND OBSTRUCTIONS...........................................................99
�
2-02.3(3) Removal of Pavement,Sidewalks,and Curbs........................................................99
2-02.4 Measurement..........................................................................................................99
�.
2-02.5 Payment..................................................................................................................99
2-03 ROADWAY EXCAVATION AND EMBANKMENT.............................................................100
�
2-03.3 Construction Requirements....................................................................................100
2-03.4 Measurement........................................................................................................101
�` 2-03.5 Payment
................................................................................................................101
2-04 HAUL........................................................................................................................101
"'„' 2-04.5 Payment................................................................................................................101
2-06 SUBGRADE PREPARATION.........................................................................................101
"'� 2-06.5 Measurement and Payment ...............................................101
...................................
2-09 STRUCfURE EXCAVATION..........................................................................................102
� 2-09.1 Description............................................................................................................102
2-09.3(1)D Disposal of Excavated Material.........................................................................102
�rr 2-09.4 Measurement........................................................................................................102
2-09.5 Payment................................................................................................................102
wr 5-04 ASPHALT CONCRETE PAVEMENT................................................................................103
5-04.2 Materials...............................................................................................................103
,w, 5-04.3 Construction Requirements....................................................................................103
5-04.3(5) Conditioning the Existing Surface.......................................................................104
�rr
5
�
�
5-04.3(5)A Preparation of Existing Surface.........................................................................104 �t
5-04.3(7)A Mix Design......................................................................................................105
5-04.3(8)A Acceptance Sampling and Testing—HMA Mixture.............................................105 �j
5-04.3(10)B Control..........................................................................................................105
5-04.5 Payment................................................................................................................105 �ry
5-04.5(1)A Price Adjustments for Quality of HMA Mixture.................................................105
5-04.5(1)B Price Adjustments for Quality of HMA Compaction...........................................106 �
5-06 TEMPORARY RESTORATION IN PAVEMENT AREAS......................................................107
5-06.1 Description............................................................................................................107 �
5-06.2 Materials...............................................................................................................107
5-06.3 Construction Requirements....................................................................................107 '
�
7-01 DRAINS.....................................................................................................................107
7-01.2 Materials...............................................................................................................107
�
7-01.3 Construction Requirements....................................................................................107
7-01.4 Measurement........................................................................................................108
�
7-02 CULVERTS.................................................................................................................108
7-02.2 Materials...............................................................................................................108 �
�
7-04 STORM SEWERS........................................................................................................108
7-04.2 Materials...............................................................................................................108
7-04.2(2) Temporary Stormwater Diversion.......................................................................109 �
7-04.3(1) Cleaning and Testing..........................................................................................110
7-04.3(1)G Abandon Existing Storm Sewer Pipes �
...............................................................111
7-04.3(2) CCTV Inspection.................................................................................................111
7-04.3(3) Direct Pipe Connections......................................................................................111 "r�
7-05 MANHOLES, INLETS,AND CATCH BASINS...................................................................111
7-05.3 Construction Requirements....................................................................................111 �t'
7-05.3(1) Adjusting Manholes and Catch Basins to Grade...................................................111
7-05.3(2) Abandon Existing Manholes...............................................................................113 �ir
7-05.3(3) Connections to Existing Manholes......................................................................113 ,
7-05.3(5) Manhole Coatings..............................................................................................113 �
7-06 TRENCH DRAINS(NEW SECTION).................................................................................113
7-06.1 Description..............................................................................................................114 �
7-06.2 Materials.................................................................................................................114
�
6
�rt
r
wn 7-06.3 Construction Requirements......................................................................................114
7-08 GENERAL PIPE INSTALLATION REQUIREMENTS...........................................................114
,,,� 7-08.3 Construction Requirements....................................................................................114
7-08.3(1)A Trenches ..........................................................................................................114
,�„ 7-08.3(1)C Bedding the Pipe..............................................................................................115
7-08.3(1)D Pipe Foundation .............................................................................................115
� 7-08.3(2)A Survey Line and Grade.....................................................................................116
7-08.3(2)B Pipe Laying—General.......................................................................................116
�
7-08.3(2)E Rubber Gasketed Joints....................................................................................116
7-08.3(2)H Sewer Line Connections...................................................................................117
�
7-08.3(2)J Placing PVC Pipe...............................................................................................117
7-08.3(3)A Backfilling Pipe Trenches..................................................................................117
7-09 PIPE AND FITTINGS FOR WATER MAINS.....................................................................118
�
7-09.3(15)A Ductile Iron Pipe............................................................................................118
7-09.3(15)B Polyvinyl Chloride (PVC) Pipe(4 inches and Over)...........................................119
�
7-09.3(17) Laying Ductile Iron Pipe and Fittings with Polyethylene Encasement..................119
7-09.3�19)A Connections to Existing Mains........................................................................119
�
7-09.3(21) Concrete Thrust Blocking and Dead-Man Block.................................................120
7-09.3(23) Hydrostatic Pressure Test.................................................................................121
� 7-09.3(24)A Flushing and
..................................................................................................123
7-09.3(24)D Dry Calcium Hypochlorite ..............................................................................123
�r" 7-09.3(24)K Retention Period............................................................................................123
7-09.3(24)N Final Flushing and Testing..............................................................................123
"" 7-09.3(25) Joint Restraint Systems.....................................................................................124
7-09.4 Measurement........................................................................................................125
+� 7-09.5 Payment................................................................................................................125
7-12 VALVES FOR WATER MAINS.......................................................................................126
rrr 7-12.3(1) Installation of Valve Marker Post........................................................................126
7-12.3(2j Adjust Existing Valve Box to Grade......................................................................126
�r, 7-12.4 Measurement........................................................................................................126
7-12.5 Payment................................................................................................................127
,,,,. 7-14 HYDRANTS................................................................................................................127
7-14.3(1) Setting Hydrants................................................................................................127
�
7
,�w
�
7-14.3(3) Resetting Existing Hydrants................................................................................128 �
7-14.3(4) Moving Existing Hydrants...................................................................................128
7-14.3(7) Remove and Salvage Hydrant...............................................................................128 �
7-14.5 Payment................................................................................................................128
7-15 SERVICE CONECTIONS...............................................................................................129 �
7-15.3 Construction Details...............................................................................................129
7-15.5 Payment................................................................................................................130 �
7-17 SANITARYSEWERS....................................................................................................130
7-17.2 Materials...............................................................................................................130
�
7-17.3 Construction Requirements....................................................................................130
7-17.3(1) Protection of Existing Sewerage Facilities............................................................130
�
7-17.3(2)H Television Inspection .......................................................................................130
7-17.4 Measurement........................................................................................................131
�
7-17.3(2)I Abandon Existing Sanitary Sewer Pipes .............................................................131
7-17.5 Payment................................................................................................................131
�
7-21 GENERAL SPECIFICATIONS FOR CURED IN PLACE PIPE (CIPP).......................................132
.�
7-21.1 Description............................................................................................................132
rli�
7-21.1(1) Related Work Specified Elsewhere......................................................................132
7-21.1(2) Licensing ...........................................................................................................132 ,
7-21.1(3) Contractor and Manufacturer Qualifications.......................................................133 �'
7-21.1(4) Contractor Submittals........................................................................................133 .,
7-21.1(5) Quality Assurance..............................................................................................134 �
7-21.1(6) Warranty...........................................................................................................135 :�
7-21.2 Materials...............................................................................................................135 �►
7-21.2 Cured in Place Resin Impregnated Material in General............................................135
7-21.2(2) Resin.................................................................................................................137 �
7-21.2(3) Physical Properties.............................................................................................137
7-21.3 Construction Requirements....................................................................................137 ,�
7-21.3(1) Preparation .......................................................................................................137
7-21.3(1)A Flow Management...........................................................................................137 �ij
7-21.3(1)B Cleaning..........................................................................................................138
7-21.3(1)C Point Repairs...................................................................................................138 �
7-21.3(1)D Manholes........................................................................................................139
�
8
�
rr
�w► 7-21.3(2) Liner Installation................................................................................................139
7-21.3(2)A Inversion Method............................................................................................139
wr, 7-21.3(2)B Pull/Winch Method .........................................................................................139
7-21.3(2)C Finished Pipe Liner...........................................................................................140
;,,� 7-21.3(3) Service Connection Restoration..........................................................................140
7-21.3(4) Testing...............................................................................................................140
� 7-21.3(4)A Material Testing...............................................................................................140
7-21.3(4)B Field Testing.....................................................................................................140
�
7-21.3(4)C Post Installation CCTV Inspection......................................................................140
7-21.4 Measurement........................................................................................................141
7-21.5 Payment................................................................................................................141
+�ra
7-22 RESIN IMPRE6NATED FABRIC CIPP.............................................................................141
7-22.1 Description............................................................................................................141
rr
7-22.1(1) Related Work Specified Elsewhere......................................................................141
7-22.2 Materials...............................................................................................................141
w.
7-22.2(1) Cured in Place Pipe Liner....................................................................................141
7-22.2(2) Resin.................................................................................................................141
�
7-22.2(3) Physical Properties.............................................................................................141
7-22.3 Construction Requirements....................................................................................142
'�" 7-22.3 1 Pre aration 142
� ) p .......................................................................................................
7-22.3(1)A Cleaning..........................................................................................................142
'�" 7-22.3(2) Installation ................................................142
........................................................
7-22.3(2)A Resin Impregnation .........................................................................................142
'.�' 7-22.3(2)B Water,Air or Steam Curing...............................................................................142
7-22.3(2)C Cool Down.......................................................................................................143
+� 7-23 RESIN IMPREGNATED FIBERGLASS CIPP.....................................................................143
7-23.1 Description............................................................................................................143
r 7-23.1(1) Related Work Specified Elsewhere......................................................................143
7-23.1(2) Reference Specifications,Codes, and Standards..................................................143
�r„ 7-23.1(3) CIPP Liner Samples.............................................................................................144
7-23.1(4) CIPP Liner Handling............................................................................................144
rr, 7-23.2 Materials...............................................................................................................144
7-23.2(1) General Specifications........................................................................................144
rr
9
�.
�
7-23.2(2) Chemical Resistance...........................................................................................145 i�
7-23.3(3) Component Properties.......................................................................................145 :
7-23.3(4) Finished and Cured CIPP Liner Properties............................................................145 �
7-23.2(5) Dimensions........................................................................................................145
7-23.3 Construction Requirements....................................................................................145 �
7-23.3(1) Installation Procedures......................................................................................145
7-23.3(1)A Installation Process..........................................................................................146 �
7-23.3(1)B Curing.............................................................................................................146
7-23.3(2) Finished Product................................................................................................146 �
8-02 ROADSIDE RESTORATION ..........................................................................................146
8-02.3(4)A Topsoil Type A.................................................................................................146 :<
11i�,
8-02.3(16) Lawn Installation..............................................................................................146
8-02.3(16)A Lawn Installation ...........................................................................................146 -.
rr�i
8-02.3(16)A1 Qualifications of Workmen...........................................................................146
8-02.3(16)A2 Submittals...................................................................................................146 <
�
8-02.3(16)A2a Certi�cation of Material..............................................................................147
8-02.3(16)A2b Manufacturer's Certificates of Conformance...............................................147 a
�l
8-02.3(16)A2c Schedule for Installation.............................................................................147
8-02.3�16)A3 Product Handling.........................................................................................147 ,
8-02.3(16)A4 Site Information...........................................................................................147 �
8-02.3(16)A5 Sod..............................................................................................................147
8-02.3(16)A5a Other Materials ............................................................147 �'
.............................
8-02.3(16)A6 Execution.....................................................................................................148 ,;.,
,:<
8-02.3(16)A6a Installation Preparation..............................................................................148 +�
8-02.3(16)A6b Sod Installation..........................................................................................148
8-02.3(16)B Lawn Establishment.......................................................................................148 �
8-02.3(16)B Lawn Establishment and Final Acceptance......................................................148
8-02.3(16)B1 Establishment Period ...................................................................................149 irr�
8-02.3(16)62 Guarantee....................................................................................................149
8-02.3(16)B3 Final Acceptance..........................................................................................149 ,rr�
8-09 RAISED PAVEMENT MARKERS....................................................................................149
8-09.5 Payment................................................................................................................149 �
8-13 MONUMENT CASES ..................................................................................................150
�
10
�
�
+ra 8-13.1 Description............................................................................................................150
8-13.3 Construction Requirements....................................................................................150
,.. 8-13.4 Measurement........................................................................................................150
8-13.5 Payment................................................................................................................150
� 8-14 CEMENT CONCRETE SIDEWALKS................................................................................150
8-14.3(4) Curing................................................................................................................150
� 8-14.4 Measurement........................................................................................................151
8-14.5 Payment................................................................................................................151
..�.
8-17 IMPACT ATTENUATOR SYSTEMS.................................................................................151
8-17.5 Payment................................................................................................................151
�
8-20 ILLUMINATION,TRAFFIC SIGNAL SYSTEMS,AND ELECTRICAL......................................151
8-20.2(1) Equipment List and Drawings.............................................................................151
8-22 PAVEMENT MARKING ...............................................................................................152
�r
8-22.1 Description............................................................................................................152
8-22.3(5) Installation Instructions .....................................................................................152
�
8-22.5 Payment................................................................................................................153
8-23 TEMPORARY PAVEMENT MARKINGS.........................................................................153
.�.
8-23.5 Payment................................................................................................................153
9-03.8(7) HMA Tolerances and Adjustments.......................................................................153
�` 9-05 DRAINAGE STRUCTURES, CULVERTS,AND CONDUITS
.................................................154
9-05.4 Steel Culvert Pipe and Pipe Arch(RC)......................................................................154
"�' 9-05.7(2) Reinforced Concrete Storm Sewer Pi e RC 1
p � )........................................................ 54
9-05.7(2)A Basis for Acceptance(RC).................................................................................154
"�" 9-05.7(3) Concrete Storm Sewer Pipe Joints(RC)...............................................................154
9-05.7(4) Testing Concrete Storm Sewer Pipe Joints(RC)....................................................154
+� 9-05.9 Steel Spiral Rib Storm Sewer Pipe(RC)....................................................................154
9-05.12 Polyvinyl Chloride(PVC)Pipe................................................................................155
� 9-05.12(3) CPEP Sewer Pipe..............................................................................................155
9-05.14 ABS Composite Sewer Pipe...................................................................................155
�,,, 9-05.17 Aluminum Spiral Rib Storm Sewer Pipe.................................................................155
9-05.22 High Density Polyethylene Piping..........................................................................156
�„ 9-05.24 Polypropylene Culvert Pipe, Polypropylene Storm Sewer Pipe, and Polypropylene
SanitarySewer Pipe...........................................................................................................158
rr
11
�
,.�
�
9-05.24(1) Polypropylene Culvert Pipe and Storm Sewer Pipe.............................................158 �it
9-05.24(2) Polypropylene Sanitary Sewer Pipe...................................................................158
9-08 PAI NTS .................................159 �
....................................................................................
9-08.8 Manhole Coating System Products..........................................................................159
9-08.8(1) Coating Systems Specification ............................................................................159 �
9-14 EROSION CONTROLAND ROADSIDE PLANTING..........................................................159
9-14.1(1) Topsoil Type A....................................................................................................159 �
9-14.6(8) Sod....................................................................................................................160
9-23 CONCRETE CURING MATERIALS AND ADMIXTURES....................................................160 �
9-23.9 Fly Ash (RC)............................................................................................................160
9-30 WATER DISTRIBUTION MATERIALS.............................................................................160
wi�
9-30.1 Pipe.....................................................................................................................160
9-30.1(1) Ductile Iron Pipe..................................................................................................160 ;:r
�
9-30.1(2) Polyethylene Encasement..................................................................................161
9-30.2 Fittings..................................................................................................................161
�
9-30.2(1) Ductile Iron Pipe................................................................................................161
9-30.2(2) Galvanized Iron Pipe .......161 ��
...................................................................................
9-30.2(3) Steel Casing Pipe................................................................................................162
�
9-30.2(4) Steel Pipe...........................................................................................................162
9-30.2(4) Spacers and Seals for Steel Casing Pipe...............................................................162
�
9-30.2(6) Restrained Joint.................................................................................................162 ,.�;
9-30.2(6) Restrained Joint Pipe and Fittings.......................................................................162 '�
9-30.2(7) Bolted,Sleeve-Type Couplings for Plain End Pipe................................................163
9-30.3 Valves..................................................................................................................163
�
9-30.3(1) Gate Valves(3 inches to 16 inches).....................................................................163 =
9-30.3(3) Butterfly Valves.................................................................................................163 tit�
9-30.3(4) Valve Boxes .......................................................................................................164
9-30.3(5) Valve Marker Posts............................................................................................164 �ili
9-30.3(6) Valve Stem Extensions.......................................................................................164 _„
9-30.3(7) Combination Air Release/Air Vacuum Valves.......................................................164 �
9-30.3(8) Tapping Sleeve and Valve Assembly....................................................................164
9-30.3(9) Blow-Off Assembly............................................................................................164 �
9-30.5 Hydrants................................................................................................................165
�
12
�
r.
+�.. 9-30.5(1) End Connections................................................................................................165
9-30.5(2) Hydrant Dimensions...........................................................................................165
,■„ 9-30.6 Water Service Connections(2 Inches and Smaller).................................................165
9-30.6(3) Service Pipes .....................................................................................................165
,rrr 9-30.6(3)B Polyethylene Pipe............................................................................................165
9-30.6(4) Service Fittings ..................................................................................................165
� 9-30.6(5) Meter Setters.....................................................................................................165
9-30.6(7) Meter Boxes......................................................................................................166
re
10 Removal of Utility Locate Markings From Sidewalks Required.......................................166
�
�rr
�
+�r.
�
�
�
arr
�
�
�t
�
13
�s
o9iosizo�� �
,r
SPECIAL PROVIS�ONS �
The work on this project shall be accomplished in accordance with the Standard Specifications for
Road, Bridge and Municipal Construction, 2016 edition, as issued by the Washington State �
Department of Transportation (WSDOT)and the American Public Works Association (APWA),
Washington State Chapter(hereafter "Standard Specifications"). The Standard Specifications, as
modified or supplemented by the Amendments to the Standard Specifications and these Special �
Provisions, all of which are made a part of the Contract Documents,shall govern all of the Work.
These Special Provisions are made up of both General Special Provisions(GSPs)from various
sources,which may have project-specific fill-ins; and project-specific Special Provisions. Each �
Provision either supplements, modifies,or replaces the comparable Standard Specification, or is a
new Provision. The deletion, amendment, alteration,or addition to any subsection or portion of the
Standard Specifications is meant to pertain only to that particular portion of the section, and in no �
way should it be interpreted that the balance of the section does not apply.
Also incorporated into the Contract Documents by reference are:
• Manual on Uniform Traffic Control Devices for Streets and Highways, currently adopted �
edition,with Washington State modifications, if any
• Standard Plans for Road, Bridge and Municipal Construction,WSDOT/APWA, current edition
• City of Renton Standard Details, City of Renton Public Works Department, Current Edition �
• Public Rights-Of-Way Accessibility Guidelines (PROWAG), current edition
Contractor shall obtain copies of these publications, at Contractor's own expense. �,
1-01 DEFINITIONS AND TERMS
�
1-01.1 General
Section 1-01.1 is supplemented with:
�******�
Whenever reference is made to the State, State of Washington, Commission, Department of uii�,
Transportation, Secretary of Transportation, Owner, Contracting Agency or Engineer, such reference
shall be deemed to mean the City of Renton acting through its City Council, employees, and duly
authorized representatives for all contracts administered by the City of Renton. �
All references to "State Materials Laboratory" shall be revised to read "Contracting Agency
designated location".
�
1-01.3 Definitions
Section 1-01.3 is revised and supplemented by the following:
�******�
Act of God �
"Act of God" means an earthquake, flood, cyclone, or other cataclysmic phenomenon of nature. A
rain, windstorm, high water or other natural phenomenon of unusual intensity for the specific
locality of the Work, which might reasonably have been anticipated from historical records of the �
general locality of the Work, shall not be construed as an act of God.
Consulting Engineer
The Contracting Agency's design consultant, who may or may not administer the construction �
program for the Contracting Agency.
Contract Documents
See definition for"Contract". +�
�
14
�
�++ 09/08/2017
„�, Contract Price
Either the unit price, the unit prices, or lump sum price or prices named in the proposal, or in
properly executed change orders.
"■�' Contract Time
The period of time established by the terms and conditions of the Contract within which the Work
must be physically completed.
�" Dates
Bid Opening Date: The date on which the Contracting Agency publicly opens and reads the
bids.
ar
Award Date:The date of the formal decision of the Contracting Agency to accept the lowest
responsible and responsive Bidder for the Work.
� Contract Execution Date: The date the Contracting Agency officially binds the agency to the
Contract.
Notice to Proceed Date: The date stated in the Notice to Proceed on which the Contract
�"` Time begins.
Substantial Completion Date: The day the Engineer determines the Contracting Agency has
,,,r�r full and unrestricted use and benefit of the facilities, both from the operational and safety
standpoint, and only minor incidental Work, replacement of temporary substitute facilities,
or correction or repair remains for the physical completion of the total contract.
� Contract Completion Date: The date by which the Work is contractually required to be
physically completed. The Contract Completion Date will be stated in the Notice to Proceed.
Revisions of this date will be authorized in writing by the Engineer whenever there is an
�.
extension to the Contract time.
Completion Date: The day all the Work specified in the Contract is completed and all the
obligations of the Contractor under the Contract are fulfilled by the Contractor.
�
Final Acceptance Date: The date the Contracting Agency accepts the Work as complete per
the Contract requirements.
++� Day
Unless otherwise designated, day(s) as used in the Contract Documents, shall be understood to
mean working days.
" Engineer
The City Engineer or duly authorized representative, or an authorized member of a licensed
consulting firm retained by the Owner for the construction engineering of a specific public works
;,�,, project.
Inspector
The Owner's authorized representative assigned to make necessary observations of the Work
+� performed or being performed, or of materials furnished or being furnished by the Contractor.
Notice of Award: The written notice from the Contracting Agency to the successful bidder signifying
the Contracting Agency's acceptance of the bid.
srr
Notice to Proceed: The written notice from the Contracting Agency or the Engineer to the
Contractor authorizing and directing the Contractor to proceed with Work and establishing the date
,,,,,, on which the Contract time begins.
�
15
�
o9iosi2o�� rW�
Or Equal
Where the term "or equal" is used herein, the Contracting Agency, or the Contracting Agency on �
recommendation of the Engineer, shall be the sole judge of the quality and suitability of the
proposed substitution. The responsibility and cost of furnishing necessary evidence,
demonstrations, or other information required to obtain the approval of alternative materials or �
processes by the Owner shall be entirely borne by the Contractor.
Owner
The City of Renton or its authorized representative also referred to as Contracting Agency. �
Performance and Payment Bond
Same as"Contract Bond" defined in the Standard Specifications. '
�
Plans
The Contract Plans and/or Standard Plans which show location, character, and dimensions of
prescribed Work including layouts, profiles, cross-sections, and other details. Drawings may either be �
bound in the same book as the balance of the Contract Documents or bound in separate sets, and
are a part of the Contract Documents, regardless of the method of binding. The terms "Standard
Drawings" or"Standard Details" generally used in Specifications refers to drawings bound either with
the specification documents or included with the Plans or the City of Renton Standard Plans. �
Points
Wherever reference is made to the Engineer's points,this shall mean all marks, bench marks, �
reference points, stakes, hubs,tack,etc., established by the Engineer for maintaining horizontal and
vertical control of the Work.
Provide �Ii,
Means "furnish and install" as specified and shown in the Plans.
Secretary,Secretary of Transportation '
The chief executive officer of the Department and other authorized representatives. The chief �
executive officer to the Department shall also refer to the Department of Public Works
Administrator.
�,
Shop Drawings
Same as "Working Drawings" defined in the Standard Specifications.
Special Provisions �ii
Modifications to the Standard Specifications and their amendments that apply to an individual
project. The special provisions may describe Work the Specifications do not cover. Such Work shall
comply first with the Special Provisions and then with any Specifications that apply. The Contractor
shall include all costs of doing this Work within the bid prices. �
State
The state of Washington acting through its representatives. The State shall also refer to The City of �
Renton and its authorized representatives where applicable.
Supplemental Drawings and Instructions
Additional instructions by the Engineer at request of the Contractor by means of drawings or �
documents necessary, in the opinion of the Engineer,for the proper execution of the Work. Such
drawings and instructions are consistent with the Contract Documents.
Traffic '�
Both vehicular and non-vehicular traffic, such as pedestrians, bicyclists,wheelchairs, and equestrian
traffic.
Utility �
Public or private fixed improvement for the transportation of fluids, gases, power,signals, or
�
l6
I�it
'� 09/08/2017
r�,r communications and shall be understood to include tracks, overhead and underground wires,
cables, pipelines, conduits, ducts, sewers, or storm drains.
1-02 BID PROCEDURES AND CONDITIONS
�
1-02.1 Prequalification of Bidders
Delete this Section and replace it with the following:
�******)
� Bidders shall be qualified by experience, financing, equipment, and organization to do the Work
called for in the Contract Documents. The Contracting Agency reserves the right to take whatever
action it deems necessary to ascertain the ability of the bidder to perform the Work satisfactorily.
�
1-02.2 Plans and Specifications
Delete this Section and replace it with the following:
�******�
�"` Information as to where Bid Documents can be obtained or reviewed will be found in the Call for
Bids (Advertisement for Bids)for the Work.
� After award of the Contract, Plans and Specifications will be issued to the Contractor at no cost as
detailed below:
To Prime Contractor No. of Sets Basis of Distribution
+� Reduced Plans (11" x 17") and 4 Furnished automatically
contract rovisions u on award
Large Plans (22"x 34") 4 Furnished only upon
�
re uest
Additional Plans and Contract Provisions may be purchased by the Contractor by payment of the cost
stated in the Call for Bids.
�.
1-02.4(2) Subsurface Information
�.
Section 1-02.4(2) is supplemented with the following:
(******)
If a geotechnical study was prepared for the project, then the findings and recommendations are
,� summarized in a report provided in the contract documents.
1-02.5 Proposal Forms
Delete this Section and replace it with the following:
� �******�
At the request of the bidder, the Contracting Agency will provide a proposal form for any project on
which the bidder is eligible to bid.
�
The proposal form will identify the project and its location and describe the Work. It will also list
estimated quantities, units of ineasurement,the items of Work, and the materials to be furnished at
the unit bid prices. The bidder shall complete spaces on the proposal form that call for, but are not
� limited to, unit bid prices; extensions; summations; the total bid amount; signatures; date; and,
where applicable, retail sales taxes and acknowledgement of addenda; the bidder's name, address,
telephone number, and signature; and a State of Washington Contractor's Registration Number. Bids
shall be completed by typing or shall be printed in ink by hand, preferably in black ink. The required
'�` certifications are included as part of the proposal form.
The Contracting Agency reserves the right to arrange the proposal forms with alternates and
,,,�.. additives, if such be to the advantage of the Contracting Agency. The bidder shall bid on all
alternates and additives set forth in the proposal forms unless otherwise specified.
�
17
�r
o9iosi2o�� �
Any correction to a bid made by interlineations, alteration, or erasure, shall be initialed by the signer �
of the bid. The bidder shall make no stipulation on the Bid Form, nor qualify the bid in any manner.
A bid by a corporation shall be executed in the corporate name, by the president or a vice president
(Or other corporate officer accompanied by evidence of authority to sign). �if,
A bid by a partnership shall be executed in the partnership name, and signed by a partner. A copy of
the partnership agreement shall be submitted with the Bid Form if any D/M/WBE requirements are
to be satisfied through such an agreement. �`
A bid by a joint venture shall be executed in the joint venture name and signed by a member of the
joint venture. A copy of the joint venture agreement shall be submitted with the Bid Form if any �
D/W/MBE requirements are to be satisfied through such an agreement.
1-02.6 Preparation of Proposal
Section 1-02.6 is supplemented with: ( �
Supplement the second paragraph with the following:
****** 1I�,
4. If a minimum bid amount has been established for any item,the unit or lump sum price �
must equal or exceed the minimum amount stated.
�
5. Any correction to a bid made by interlineation, alteration, or erasure, shall be initialed by the
signer of the bid.
Delete the last paragraph,and replace it with the following: �'
The Bidder shall make no stipulation on the Bid Form, nor qualify the bid in any manner.
A bid by a corporation shall be executed in the corporate name, by the president or a vice
president(or other corporate officer accompanied by evidence of authority to sign). �'
A bid by a partnership shall be executed in the partnership name,and signed by a partner. A
copy of the partnership agreement shall be submitted with the Bid Form if any D/M/WBE
requirements are to be satisfied through such an agreement. �'
A bid by a joint venture shall be executed in the joint venture name and signed by a member of
the joint venture. A copy of the joint venture agreement shall be submitted with the Bid Form if
any D/W/MBE requirements are to be satisfied through such an agreement. �
1-02.6(1) Proprietary Information
1-02.6(1) is a new Section. �j,
�******�
Vendors should, in the bid proposal, identify clearly any material(s), which constitute
"(valuable) formula, designs drawings, and research data" so as to be exempt from public
disclosure, RCW 42.17.310, or any materials otherwise claimed to be exempt, along with a �
Statement of the basis for such claim of exemption. The Department (or State) will give notice
to the vendor of any request for disclosure of such information received within 5 (five) years
from the date of submission. Failure to so label such materials or failure to timely respond after
notice of request for public disclosure has been given shall be deemed a waiver by the �'
submitting vendor of any claim that such materials are, in fact, so exempt.
1-02.7 Bid Deposit �
Section 1-02.7 is supplemented with the following:
(******�
Bid Bonds shall contain the following:
�
1. Number assigned to the project by the Contracting Agency;
2. Name of the project;
�,
18
�
''� 09/08/2017
;�., 3. The Contracting Agency named as obligee;
4. The amount of the bid bond stated either as a dollar figure or as a percentage which
represents five percent of the maximum bid amount that could be awarded;
5. Signature of the bidder's officer empowered to sign official statements. The signature of the
�' person authorized to submit the bid should agree with the signature on the bond, and the
title of the person must accompany said signature;
6. The signature of the surety's officer empowered to sign the bond form included in the
�
Contract Provision.
1-02.9 Delivery of Proposal
Revise the first paragraph to read:
�
�******�
Each proposal shall be submitted in a sealed envelope with Proiect Name and Proiect Number
clearlv marked on the outside of the envelope as stated in the Advertisement for Bids or as
otherwise stated in the Bid Documents.
�
1-02.12 Public Opening of Proposals
Section 1-02.12 is supplemented with the following:
�******�
�" The Contracting Agency reserves the right to postpone the date and time for bid opening.
Notification to bidder will be by addenda.
� 1-02.13 Irregular Proposals
Revise item I to read:
�******�
1. A proposal will be considered irregular and will be rejected if:
� a. The bidder is not prequalified when so required;
b. The authorized proposal form furnished by the Contracting Agency is not used or is
altered;
c. The complete proposal form contains any unauthorized additions, deletions,
`� alternate bids, or conditions;
d. The bidder adds provisions reserving the right to reject or accept the award, or enter
into the Contract;
;,�, e. A price per unit cannot be determined from the bid proposal;
f. The proposal form is not properly executed;
g. The bidder fails to submit or properly complete a subcontractor list, if applicable, as
required in Section 1-2.6
� h. The bidder fails to submit or properly complete a Disadvantaged, Minority or
Women's Business Enterprise Certification, if applicable, as required in Section 1-
02.6; or
i. The bid proposal does not constitute a definite and unqualified offer to meet the
"" material terms of the bid invitation.
j. More than one proposal is submitted for the same project from a Bidder under the
,,,r„ same or different names.
,� 1-02.14 Disqualification of Bidders
Revise this section to read:
�******�
� 1. A bidder will be deemed not responsible and the proposal rejected if the bidder does not
meet the responsibility criteria in RCW 39.04.
2. A bidder may be deemed not responsible and the proposal rejected if:
a. More than one proposal is submitted for the same project from a bidder under the same
'�" or different names;
b. Evidence of collusion exists with any other bidder or potential bidder. Participants in
collusion will be restricted from submitting further bids;
�
19
,r�
09/08/2017
c. The bidder, in the opinion of the Contractin�A�encv, is not qualified for the Work or to �;
the full extent of the bid, or to the extent that the bid exceeds the authorized
prequalification amount as mav have been determined bv a prequalification of the
bidder;
d. An unsatisfactory performance record exists based on past or current Contracting �
Agency Work or for Work done for others, as judged from the standpoint of conduct of
the Work; workmanship; progress; affirmative action; equal employment opportunity
practices; or Disadvantaged Enterprise, Minority Enterprise, or Women's Business �
Enterprise utilization.
e. There is uncompleted Work (Contracting Agency or otherwise) which might hinder or
prevent the prompt completion of the Work bid upon;
f. The bidder failed to settle bills for labor or materials on past or current contracts; �
g. The bidder has failed to complete a written public contract or has been convicted of a
crime arising from a previous public contract;
h. The bidder is unable,financially or otherwise,to perform the Work;
i. A bidder is not authorized to do business in the State of Washington (not re�istered in �
accordance with RCW 18.27)
j. The bidderdoes not meet the supplemental qualifications criteria as stated in Section 1-
02.1(1). �
k. There are any other reasons deemed proper by the Contracting Agency.
1-02.15 Pre Award Information �
Revise this section to read:
�******�
Before awarding any contract, the Contracting Agency may require one or more of these items or
actions of: �
1. A complete statement of the origin, composition, and manufacture of any or all materials to
be used; °
2. Samples of these materials for quality and fitness tests; �
3. A progress schedule (in a form the Contracting Agency requires) showing the order of time
required for the various phases of Work;
4. A breakdown of costs assigned to any bid item; �
5. Attending at a conference with the Engineer or representatives of the Engineer;
6. Obtain and furnish a copv of a business license to do business in the city and/or county
where the Work is located;
7. A copv of State of Washin�ton Contractor's Re�istration; or �
8. Any other information or action taken that is deemed necessary to ensure that the bidder is
the lowest responsible bidder.
1-03 AWARD AND EXECUTION OF CONTRACT �
1-03.1 Consideration of bids
Section 1-03.1 is supplemented with the following: �
�******�
1-03.2 Award of Contract
Section 1-03.2 is supplemented with the following: �
�******�
The Contract, bond form, and all other forms requiring execution, together with a list of all other
forms or documents required to be submitted by the successful bidder, will be forwarded to the
successful bidder within 10 days of the award. The number of copies to be executed by the �
Contractor shall be determined by the Contracting Agency.
1-03.3 Execution of Contract
Section 1-03.3 is revised and supplemented as follows: �
�******�
Within 10 calendar days after receipt from the City of the forms and documents required to be
�
20
�
'� 09/08/2017
;,,,,, completed by the Contractor, the successful bidder shall return the signed Contracting Agency-
prepared contract, an insurance certification as required by Section 1-07.18, and a satisfactory bond
as required by law and Section 1-03.4. Before execution of the Contract by the Contracting Agency,
the successful bidder shall provide any pre-award information the Contracting Agency may require
"�" under Section 1-02.15.
Until the Contracting Agency executes a contract, no proposal shall bind the Contracting Agency nor
� shall any Work begin within the project limits or within Contracting Agency-furnished sites. The
Contractor shall bear all risks for any Work begun outside such areas and for any materials ordered
before the Contract is executed by the Contracting Agency.
,r,r If the bidder experiences circumstances beyond their control that prevents return of the Contract
documents within 10 calendar days after the award date, the Contracting Agency may grant up to a
maximum of 10 additional calendar days for return of the documents, provided the Contracting
Agency deems the circumstances warrant it.
�
The Contracting Agency is prohibited by RCW 39.06.010 from executing a contract with a Contractor
who is not registered or licensed as required by the laws of the state. In addition, the Contracting
Agency requires persons doing business with the Contracting Agency to possess a valid City of
"�`� Renton business license prior to award.
When the Bid Form provides spaces for a business license number, a Washington State Contractors
,,,,,, registration number, or both the Bidder shall insert such information in the spaces provided. The
Contracting Agency requires legible copies of the Contractor's Registration and business license be
submitted to the Engineer as part of the Contracting Agency's post-award information and
evaluation activities.
�
1-03.4 Contract Bond
Revise the first paragraph to read:
�******�
�" The successful bidder shall provide an executed contract bond for the full contract amount. This
contract bond shall:
,.,, 1. Be on the Contracting Agency-furnished form;
2. Be signed by an approved surety(or sureties)that:
a. Is registered with the Washington State Insurance Commissioner, and
b. Appears on the current Authorized Insurance List in the State of Washington published
�► by the Office of the Insurance Commissioner;
3. Be conditioned upon the faithful performance of the Contract by the Contractor within the
prescribed time;
4. Guarantee that the surety shall indemnify, defend, and protect the Contracting Agency
"` against any claim of direct or indirect loss resulting from the failure:
a. Of the Contractor(or any of the employees, subcontractors, or lower tier subcontractors
of the Contractor)to faithfully perform the Contract,or
,,,r,, b. Of the Contractor (subcontractors, or lower tier subcontractors of the Contractor) to pay
all laborers, mechanics, subcontractors, lower tie subcontractors, material person, or any
other person who provides supplies or provisions for carrying out Work;
5. Be accompanied by a power of attorney for the Surety's officer empowered to sign the
� bond; and
6. Be signed by an officer of the Contractor empowered to sign official statements (sole
proprietor or partner). If the Contractor is a corporation, the bond must be signed by the
president or vice-president, unless accompanied by a written proof of the authority of the
"""` individual signing the bond to bind the corporation (i.e., corporate resolution, power of
attorney or a letter to such effect by the president or vice-president).
;,,,,,, 1-03.7 Judicial Review
Revise the last sentence to read:
�s
21
,�r
o9iosizo�� +�
The venue of all causes of action arising from the advertisement, award,execution, and performance �
of the Contract shall be in the Superior Court of the County where the Contracting Agency's
headquarters are located.
�
1-04 SCOPE OF WORK
1-04.2 Coordination of Contract Documents, Plans, Special Provisions Specifications, and '
Addenda �
Revise the second paragraph to read:
�******�
Any inconsistency in the parts of the Contract shall be resolved by following this order of �
precedence (e.g., 1 presiding over 2, 2 over 3, 3 over 4, and so forth):
1. Addenda
2. Proposal Form
3. Special Provisions '�
4. Contract Plans
5. Contracting Agency's Standard Plans(if any) -
6. Amendments to the Standard Specifications
7. WSDOT/APWA Standard Specifications for Road, Bridge and Municipal Construction �'
8. WSDOT/APWA Standard Plans for Road, Bridge and Municipal Construction
1-04.3 Contractor-Discovered Discrepancies ,�
Section 1-04.3 is a new section:
�******�
Upon receipt of award of contract, the Contractor shall carefully study and compare all the
components of the Contract Documents and other instructions, and check and verify all field �Yri
measurements. The Contractor shall, prior to ordering material or performing Work, report in
writing to the Engineer any error, inconsistency, or omission in respect to design or mode of
construction, which is discovered. If the Contractor, in the course of this study or in the �
accomplishment of the Work, finds any discrepancy between the Plans and the physical condition of
the locality as represented in the Plans, or any such errors or omissions in respect to design or mode
of construction in the Plans or in the layout as given by points and instructions, it shall be the
Contractor's duty to inform the Engineer immediately in writing, and the Engineer will promptly �,
check the same. Any Work done after such discovery, until correction of Plans or authorization of
extra Work is given, if the Engineer finds that extra Work is involved, will be done at the Contractor's
risk. If extra Work is involved, the procedure shall be as provided in Section 1-04.4 of the Standard
Specifications. �
1-04.4 Changes
The last two paragraphs are replaced with the following: �
�******�
Renton does not have a formal policy or guidelines on cost reduction alternatives, but will evaluate
such proposals by the Contractor on a case-by-case basis.
�
1-04.4(1J Minor Changes
Section 1-04.4(1) is supplemented as follows:
�******�
Payments and credits will be determined in accordance with Section 1-09.4 of the Standard �
Specifications. For the purpose of providing a common proposal for all bidders,the Contracting
Agency may have entered an amount for"Minor Change" in the Proposal to become a part of the �
total bid by the Contractor.
1-04.8 Progress Estimates and Payments +�
Section 1-04.8 is supplemented as follows:
�******�
�
22
�
� o9iosizo��
,�,,, The Contractor is encouraged to provide to the Engineer prior to progress payments an estimate of
"Lump Sum" Work accomplished to date. The Engineer's calculations and decisions shall be final in
regard to the actual percentage of any lump sum pay item accomplished and eligible for payment
unless another specific method of calculating lump sum payments is provided elsewhere in the
'�' Specifications.
1-04.11 Final Cleanup
� Section 1-04.11 is supplemented as follows:
�******�
All salvage material as noted on the Plans and taken from any of the discarded facilities shall, at the
Engineer's discretion, be carefully salvaged and delivered to the City shops. Any cost incurred in
,,,,,; salvaging and delivering such items shall be considered incidental to the project and no
compensation will be made.
The Contract price for "Finish and Cleanup, Lump Sum," shall be full compensation for all Work,
� equipment and materials required to perform final cleanup. If this pay item does not appear in the
Contract Documents then final cleanup shall be considered incidental to the Contract and to other
pay item and no further compensation shall be made.
"� 1-OS CONTROI OF WORK
1-05.4 Conformity With and Deviation from Plans and Stakes
.�r Section 1-05.4 is supplemented with the following:
�******�
If the project calls for the Contractor supplied surveying, the Contractor shall provide all required
survey Work, including such Work as mentioned in Sections 1-05, 1-11 and elsewhere in these
'�" Specifications as being provided by the Engineer. All costs for this survey Work shall be included in
"Contractor Supplied Surveying," per lump sum.
� The Engineer or the Contractor supplied surveyor will provide construction stakes and marks
establishing lines, slopes, and grades as stipulated in Sections 1-05.4 and will perform such Work per
Section 1-11. The Contractor shall assume full responsibility for detailed dimensions, elevations, and
excavation slopes measured from the Engineer or the Contractor supplied surveyor furnished stakes
,rr and marks.
The Contractor shall provide a work site, which has been prepared to permit construction staking to
proceed in a safe and orderly manner. The Contractor shall keep the Engineer or the Contractor
�" supplied surveyor informed of staking requirements and provide at least 48 hour notice to allow the
Engineer or the Contractor supplied surveyor adequate time for setting stakes.
The Contractor shall carefully preserve stakes, marks, and other reference points, including existing
"�`' monumentation, set by Contracting Agency forces. The Contractor will be charged for the costs of
replacing stakes, markers and monumentation that were not to be disturbed but were destroyed or
damaged by the Contractor's operations. This charge will be deducted from monies due or to
.., become due to the Contractor.
Any claim by the Contractor for extra compensation by reason of alterations or reconstruction Work
allegedly due to error in the Engineer's line and grade, will not be allowed unless the original control
"'� points set by the Engineer still exist, or unless other satisfactory substantiating evidence to prove
the error was furnished by the Engineer. Three consecutive points set on line or grade shall be the
minimum points used to determine any variation from a straight line or grade. Any such variation
� shall, upon discovery, be reported to the Engineer. In the absence of such report the Contractor
shall be liable for any error in alignment or grade.
The Contractor shall provide all surveys required other than those to be performed by the Engineer.
� All survey Work shall be done in accordance with Section 1-11 SURVEYING STANDARDS of these
Specifications.
�rr
23
�.
o9ioai2o�� r�
The Contractor shall keep updated survey field notes in a standard field book and in a format set by �
the Engineer, per Section 1-11.1(4).These field notes shall include all survey Work performed by the
Contractor's surveyor in establishing line, grade and slopes for the construction Work. Copies of
these field notes shall be provided the Engineer upon request and upon completion of the Contract
Work the field book or books shall be submitted to the Engineer and become the property of the i�;;
Contracting Agency.
If the survey Work provided by the Contractor does not meet the standards of the Engineer, then
the Contractor shall, upon the Engineer's written request, remove the individual or individuals doing �
the survey Work and the survey Work will be completed by the Engineer at the Contractor's
expense. Costs for completing the survey Work required by the Engineer will be deducted from
monies due or to become due the Contractor. �
All costs for survey Work required to be performed by the Contractor shall be included in the prices
bid for the various items which comprise the improvement or be included in the bid item for
"Contractor Supplied Surveying" per lump sum if that item is included in the contracts. �i
1-05.4(3) Contractor Supplied Surveying
Section 1-05.4(3) is a new section:
�******� r�i
When the Contract provides for Contractor Supplied Surveying, the Contractor shall supply the
survey Work required for the project. The Contractor shall retain as a part of the Contractor
Organization an experienced team of surveyors under the direct supervision of a professional land �
surveyor licensed by the State of Washington. All survey Work shall be done in accordance with
Sections 1-05.4 and 1-11.
The Contractor and/or the Surveyor shall inform the Engineer in writing of any errors, discrepancies, �
and omissions to the Plans that prevent the Contractor and/or the Surveyor from constructing the
project in a manner satisfactory to the Engineer. All errors, discrepancies, and omissions must be
corrected to the satisfaction of the Engineer before the survey Work may be continued.
�
The Contractor shall coordinate his Work with the Surveyor and perform his operations in a manner
to protect all survey stakes from harm. The Contractor shall inform the Surveyor of the Contractor's
intent to remove any survey stakes and/or points before physically removing them. �
The Surveyor shall be responsible for maintaining As-Built records for the project. The Contractor
shall coordinate his operations and assist the Surveyor in maintaining accurate As-Built records for
the project. �
If the Contractor and the Surveyor fail to provide, as directed by the Engineer and/or these Plans
and Specifications, accurate As-Built records and other Work the Engineer deems necessary, the
Engineer may elect to provide at Contractor expense, a surveyor to provide all As-Built records and �
other Work as directed by the Engineer. The Engineer shall deduct expenses incurred by the
Engineer-supplied surveying from monies owed to the Contractor.
Payment per Section 1-04.1 for all Work and materials required for the full and complete survey �
Work required to complete the project and As-Built drawings shall be included in the lump sum
price for"Construction Surveying,Staking, and As-Builts."
�
1-05.4(4) Contractor Provided As-Built Information
Section 1-05.4(4) is a new section:
�******� �
It shall be the Contractors responsibility to record the location prior to the backfilling of the
trenches, by centerline station, offset, and depth below pavement, of all existing utilities uncovered
or crossed during his Work as covered under this project. �
It shall be the Contractor's responsibility to have his Surveyor locate by centerline station, offset and
�
24
�
�rr o9iosi2o��
,,;,,,, elevation each major item of Work done under this contract per the survey standard of Section 1-11.
Major items of Work shall include but not be limited to: Manholes, Catch basins and Inlets, Valves,
vertical and Horizontal Bends, Junction boxes, Cleanouts, Side Sewers, Street Lights & Standards,
Hydrants, Major Changes in Design Grade,Vaults, Culverts, Signal Poles, and Electrical Cabinets.
wr►
After the completion of the Work covered by this contract,the Contractor's Surveyor shall provide to
the City the hard covered field book(s) containing the as-built notes and one set of white prints of
the project drawings upon which he has plotted the notes of the Contractor locating existing utilities,
'�r` and one set of white prints of the project drawings upon which he has plotted the as-built location
of the new Work as he recorded in the field book(s). This drawing shall bear the Surveyor's seal and
signature certifying its accuracy.
�
All costs for as-built Work shall be included in the Contract item "Construction Surveying, Staking,
and As-Builts", lump sum.
� 1-05.7 Removal of Defective and/or Unauthorized Work
Section 1-05.7 is supplemented as follows:
�******�
Upon written notice from the Engineer, the Contractor shall promptly replace and re-execute Work
�' by Contractor forces, in accordance with the intent of the Contract and without expense to the
Owner, and shall bear the expense of making good all Work of other contractors destroyed or
damaged by such removal or replacement.
�
If the Contractor does not remove such condemned Work and materials and commence re-execution
of the Work within 7 calendar days of written notice from the Engineer, or fails to perform any part
of the Work required by the Contract Documents, the Owner may correct and remedy such Work as
� may be identified in the written notice, with Contracting Agency forces or by such other means as
the Contracting Agency may deem necessary. In that case, the Owner may store removed material.
Direct or indirect costs incurred by the Contracting Agency attributable to correcting and remedying
'�' defective or unauthorized Work, or Work the Contractor failed or refused to perform, shall be paid
by the Contractor. Payment will be deducted by the Engineer from monies due, or to become due,
the Contractor. Such direct and indirect costs shall include in particular, but without limitation,
,� compensation for additional professional services required, and costs for repair and replacement of
Work of others destroyed or damaged by correction, removal, or replacement of the Contractor's
unauthorized Work.
+rr If sufficient funds do not remain in the Contract and the Contractor does not pay the cost of such
removal and storage within 10 calendar days from the date of the notice to the Contractor of the
fact of such removal, the Owner may, upon an additional 10 calendar days written notice, sell such
materials at public or private sale, and deduct all costs and expenses incurred from monies due to
""' the Contractor, including costs of sale, and accounting to Contractor for the net proceeds remaining.
The Owner may bid at any such sale. The.Contractor shall be liable to the Owner for the amount of
any deficiency from any funds otherwise due the Contractor.
r
If the Contractor fails to comply with a written order to remedy what the Engineer determines to be
an emergency situation,the Engineer may have the defective and unauthorized Work corrected
�, immediately, have the rejected Work removed and replaced, or have Work the Contractor refuses
to perform completed by using Contracting Agency or other forces. An emergency situation is any
situation when, in the opinion of the Engineer, a delay in its remedy could be potentially unsafe,or
� might cause serious risk of loss or damage to the public,the Property Owner and the Property
Owner's property.
No adjustment in contract time or compensation will be allowed because of the delay in the
�"" performance of the Work attributable to the exercise of the Contracting Agency's rights provided by
this section.
�r
25
�
o9ioai2o�� �r
The rights exercised under the provisions of this section shall not diminish the Contracting Agency's �
right to pursue any other avenue for additional remedy or damages with respect to the Contractor's
failure to perform the Work as required.
1-05.10 Guarantees �r
Section 1-05.10 is supplemented as follows:
�******�
If within one year after the Acceptance Date of the Work by the Contracting Agency, defective
and/or unauthorized Work is discovered, the Contractor shall promptly, upon written order by the �
Contracting Agency, return and in accordance with the Engineer's instructions, either correct such
Work, or if such Work has been rejected by the Engineer, remove it from the project site and replace
it with non-defective and authorized Work, all without cost to the Contracting Agency. If the �
Contractor does not promptly comply with the written order to correct defective and/or
unauthorized Work, or if an emergency exists, the Contracting Agency reserves the right to have
defective and/or unauthorized Work corrected or removed and replaced pursuant to Section 1-05.7
"Removal of Defective and/or Unauthorized Work." �
The Contractor agrees the above one year limitation shall not exclude or diminish the Contracting
Agency's rights under any law to obtain damages and recover costs resulting from defective and/or ;
unauthorized Work discovered after one year but prior to the expiration of the legal time period set +�
forth in RCW 4.16.040 limiting actions upon a contract in writing, or liability expressed of implied
arising out of a written agreement.
The Contractor shall warrant good title to all materials, supplies, and equipment purchased for, or �'
incorporated in the Work. Nothing contained in this paragraph, however, shall defeat or impair the
right of persons furnishing materials or labor, to recover under any bond given by the Contractor for
their protection, or any rights under any law permitting such persons to look to funds due the ,,,�
Contractor in the hands of the Contracting Agency.
The provisions of this paragraph shall be inserted in all subcontracts and material contracts, and
notice of its provisions shall be given to all persons furnishing materials for the Work when no formal �
contract is entered into for such materials.
1-05.11 Finallnspection
�
1-05.11(1) Substantial Completion Date
Section 1-05.11(1) is a new section:
�******� �
When the Contractor considers the Work to be substantially complete,the Contractor shall so notify
the Engineer and request the Engineer establish the Substantial Completion Date. The Engineer will
schedule an inspection of the Work with the Contractor to determine the status of completion.
�
To be considered substantially complete the following conditions must be met:
1. The Contracting Agency must have full and unrestricted use and benefit of the facilities '
both from the operational and safety standpoint. "�
2. Only minor incidental Work, replacement of temporary substitute facilities,or
correction of repair Work remains to reach physical completion of the Work.
�
The Contractor's request shall list the specific items of Work in subparagraph two above that
remains to be completed in order to reach physical completion. The Engineer may also establish the
Substantial Completion Date unilaterally.
�
If after this inspection,the Engineer concurs with the Contractor that the Work is substantially
complete and ready for its intended use,the Engineer, by written notice to the Contractor,will set
the Substantial Completion Date. If, after this inspection the Engineer does not consider the Work
substantially complete and ready for its intended use,the Engineer will, by written notice, so notify �
the Contractor giving the reasons therefore.
�i
26
rli
� 09/08/2017
�
Upon receipt of written notice concurring in or denying substantial completion,whichever is
applicable,the Contractor shall pursue vigorously, diligently and without unauthorized interruption,
the Work necessary to reach Substantial and Physical Completion.The Contractor shall provide the
�+ Engineer with a revised schedule indicating when the Contractor expects to reach substantial and
physical completion of the Work.
The above process shall be repeated until the Engineer establishes the Substantial Completion Date
i'�' and the Contractor considers the Work physically complete and ready for Final Inspection.
1-05.11(2) Final Inspection and Physical Completion Date
,,,., Section 1-05.11(2) is a new Section:
�******�
When the Contractor considers the Work physically complete and ready for Final Inspection, the
Contractor, by Written Notice, shall request the Engineer to schedule a final inspection.The Engineer
�' will set a date for Final Inspection.The Engineer and the Contractor will then make a final inspection
and the Engineer will notify the Contractor in writing of all particulars in which the Final Inspection
reveals the Work incomplete or unacceptable.The Contractor shall immediately take such corrective
measures as are necessary to remedy the listed deficiencies. Corrective Work shall be pursued
�`" vigorously, diligently, and without interruption until physical completion of the listed deficiencies.
This process will continue until the Engineer is satisfied the listed deficiencies have been corrected.
�rr If action to correct the listed deficiencies is not initiated within 7 days after receipt of the Written
Notice listing the deficiencies,the Engineer may, upon Written Notice to the Contractor,take
whatever steps are necessary to correct those deficiencies pursuant to Section 1-05.8. The
,r,,, Contractor will not be allowed an extension of contract time because of a delay in the performance
of the Work attributable to the exercise of the Engineer's right hereunder.
�,,, Upon correction of all deficiencies, the Engineer will notify the Contractor and the Contracting
Agency, in writing, of the date upon which the Work was considered physically complete, that date
shall constitute the Physical Completion Date of the Contract, but shall not imply'all the obligations
of the Contractor under the Contract have been fulfilled.
�
1-05.11(3) Operational Testing
Section 1-05.11(3) is a new section:
�******�
�"` Unless otherwise noted in the Contract Documents, the Contractor shall give the Engineer a
minimum of 3 working days' notice of the time for each test and inspection. If the inspection is by
another authority than the Engineer, the Contractor shall give the Engineer a minimum of 3 working
„� days' notice of the date fixed for such inspection. Required certificates of inspection by other
authority than the Engineer shall be secured by the Contractor.
It is the intent of the Contracting Agency to have at the Physical Completion Date a complete and
"'�' operable system. Therefore,when the Work involves the installation of machinery or other
mechanical equipment; street lighting, electrical distribution or signal systems; irrigation systems;
buildings; or other similar Work, it may be desirable for the Engineer to have the Contractor operate
"""" and test the Work for a period of time, after final inspection but prior to the physical completion
date. Whenever items of Work are listed in the Contract Provisions for operational testing they shall
be fully tested under operating conditions for the time period specified to ensure their acceptability
''�' prior to the Physical Completion Date. During and following the test period,the Contractor shall
correct any items of workmanship, materials,or equipment which prove faulty, or that are not in
first class operating condition. Equipment, electrical controls, meters,or other devices and
�' equipment to be tested during this period shall be tested under the observation of the Engineer,so
that the Engineer may determine their suitability for the purpose for which they were installed. The
�
27
r�r
o9iogi2o�� �
Physical Completion Date cannot be established until testing and corrections have been completed �
to the satisfaction of the Engineer.
The costs for power,gas, labor, material, supplies,and everything else needed to successfully �
complete operational testing, shall be included in the unit contract prices related to the system
being tested, unless specifically set forth otherwise in the proposal.
�
Operational and test periods, when required by the Engineer, shall not affect a manufacturer's
guaranties or warranties furnished under the terms of the Contract.
r
1-05.12 Final Acceptance
The third and fourth sentences in paragraph 1 are deleted and replaced with:
(******� ;
The Final Acceptance date shall be that date in which the Renton City Council formally approves '�
acceptance of the Contract.
1-05.13 Superintendents, Labor and Equipment of Contractor r�i
Revise the seventh paragraph to read:
�******�
Whenever the Contracting Agency evaluates the Contractor's qualifications pursuant to Section 1-
02.1,the Contractin�A�encv will take these performance reports into account. �
1-05.14 Cooperation with Other Contractors
Section 1-05.14 is supplemented as follows: �
�******)
The Contractor shall afford the Owner and other contractors working in the area reasonable
opportunity for the introduction and storage of their materials and the execution of their respective �
Work, and shall properly connect and coordinate the Contractor's Work with theirs.
Other utilities, districts, agencies, and contractors who may be working within the project area are:
rr�
1. Puget Sound Energy (gas and electric)
2. AT&T Broadband
3. CenturyLink '
4. City of Renton (water,sewer,transportation) '�
5. Comcast
6. Seattle Public Utilities
7. Soos Creek Sewer and Water District
8. Cedar River Sewer and Water District �
9. Skyway Sewer and Water District
10. Private contractors employed by adjacent property owners
�
The Contractor shall coordinate with City of Renton on tying into any existing electrical service
cabinet.
1-05.16 Water and Power '�
Section 1-05.16 is a new Section:
�******)
The Contractor shall make necessary arrangements, and shall bear the costs for power and water �
necessary for the performance of the Work, unless the Contract includes power and water as a pay
item.
1-05.17 Oral Agreements �
Section 1-05.17 is a new section:
r�
28
�
'� 09/08/2017
1� �******�
No oral agreement or conversation with any officer, agent, or employee of the Contracting Agency,
either before or after execution of the Contract, shall affect or modify any of the terms or
,�„ obligations contained in any of the documents comprising the Contract. Such oral agreement or
conversation shall be considered as unofficial information and in no way binding upon the
Contracting Agency, unless subsequently put in writing and signed by the Contracting Agency.
� 1-05.18 Contractor's Daily Diary
Section 1-05.18 is a new section:
�******�
�nr The Contractor and subcontractors shall maintain and provide to the Engineer a Daily Diary Record
of this Work. This diary will be created by pen entries in a hardbound diary book of the type that is
commonly available through commercial outlets. The diary must contain the Project and Number; if
the diary is in loose-leaf form, this information must appear on every page. The diary must be kept
"�' and maintained by the Contractor's designated project superintendent(s). Entries must be made on
a daily basis and must accurately represent all of the project activities on each day.
�, At a minimum,the diary shall show on a daily basis:
1. The day and date.
2. The weather conditions, including changes throughout the day.
3. A complete description of Work accomplished during the day with adequate references to
� the Plans and Contract Provisions,so that the reader can easily and accurately identify said
Work in the Plans. Identify location/description of photographs or videos taken that day.
4. An entry for each and every changed condition, dispute or potential dispute, incident,
accident, or occurrence of any nature whatsoever which might affect the Contractor, the
"� Owner, or any third party in any manner.
5. Listing of any materials received and stored on- or off-site by the Contractor for future
installation,to include the manner of storage and protection of the same.
� 6. Listing of materials installed during each day.
7. List of all subcontractors working on-site during each day.
8. Listing of the number of the Contractor's employees working during each day by category
of employment.
rrr 9. Listing of the Contractor's equipment working on the site during each day. Idle equipment
on the site shall be listed and designated as idle.
10. Notations to explain inspections, testing, stake-out, and all other services furnished by the
Owner or other party during each day.
"�" 11. Entries to verify the daily (including non-Work days) inspection and maintenance of traffic
control devices and condition of the traveled roadway surfaces. The Contractor shall not
allow any conditions to develop that would be hazardous to the public.
,� 12. Any other information that serves to give an accurate and complete record of the nature,
quantity, and quality of Contractor's progress on each day.
13. Plan markups showing locations and dimensions of constructed features to be used by the
Engineer to produce record drawings.
�rr 14. All pages of the diary must be numbered consecutively with no omissions in page
numbers.
15. Each page must be signed and dated by the Contractor's official representative on the
p roj ect.
�
The Contractor may use additional sheets separate from the diary book if necessary to provide a
complete diary record, but they must be signed, dated, and labeled with project name and number.
� It is expressly agreed between the Contractor and the Owner that the Daily Diary maintained by
the Contractor shall be the "Contractor's Book of Original Entry" for the documentation of any
potential claims or disputes that might arise during this contract. Failure of the Contractor to
nr maintain this diary in the manner described above will constitute a waiver of any such claims or
disputes by the Contractor.
rrr
29
r
09/08/2017 �
The Engineer or other Owner's representative on the job site will also complete a Daily Construction �
Report.
1-06 CONTROL OF MATERIAL '�
1-06.1 Approval of Materials Prior to Use
Section 1-06.1 is supplemented as follows: �
(******�
The materials and equipment lists submitted to the Engineer at the Preconstruction Conference shall
include the quantity, manufacturer, and model number, if applicable, of materials and equipment to
be installed under the Contract. This list will be checked by the Engineer as to conformity with the �
Contract Documents. The Engineer will review the lists within 10 working days, noting required
corrections. The Contractor shall make required corrections and file 2 corrected copies with the
Engineer within one week after receipt of required corrections. The Engineer's review and
acceptance of the lists shall not relieve the Contractor from responsibility for suitability for the �
intended purpose, nor for deviations from the Contract Documents.
1-06.2(1) Samples and Tests for Acceptance �
Section 1-06.2(1) is supplemented a follows:
�******� �
The finished Work shall be in accordance with approved samples. Approval of samples by the ``
Engineer does not relieve the Contractor of responsibility for performance of the Work in �
accordance with the Contract Documents.
1-06.2(2) Statistical Evaluation of Materials for Acceptance „�;
Section 1-06.02(2) is supplemented by adding the following:
�******�
Unless stated otherwise in the special provisions, statistical evaluation will not be used by the City of
Renton. �
1-07 LEGAL RELATtONS AND RESPONSIBILITIES TO THE PUBLIC '!
�
1-07.1 Laws to be Observed
Section 1-07.1 is supplemented as follows:
�******� �
The Contractor shall erect and properly maintain, at all times, as required by the conditions and
progress of the Work, all necessary safeguards for protection of workers and the public; shall post
danger signs warning against known or unusual hazards; and shall designate as Safety Supervisor, a ,`
responsible employee on the construction site whose duty shall be the enforcement of safety. The �
name and position of such person so designated shall be reported in writing to the Engineer by the
Contractor.
The Contractor shall, at all times, enforce strict discipline and good order among all employees and �
shall not employ any person unfit or not skilled in the Work assigned to him/her.
Necessary sanitation conveniences for the use of the workers on the job, properly secluded from �
public observation,shall be provided and maintained by the Contractor.
In cases of conflict between different safety regulations,the more stringent regulation shall apply. ''
�
The Washington State Department of Labor and Industries shall be the sole and paramount
administrative agency responsible for the administration of the provisions of the Washington ''
Industrial Safety and Health Act of 1973 (WISHA). �
�
30
�
� o9iosiaol�
.r The Contractor shall maintain at the project site office, or other well-known place at the project site,
all articles necessary for providing first aid to the injured. The Contractor shall establish, publish,
and make known to all employees, procedures for ensuring immediate removal to a hospital or
r. doctor's care, and persons, including employees, who may have been injured on the project site.
Employees should not be permitted to Work on the project site before the Contractor has
established and made known procedures for removal of injured persons to a hospital or a doctor's
.r care.
The Contractor shall have sole responsibility for the safety,efficiency, and adequacy of the
rrr Contractor's plant, appliances, and methods, and for any damage or injury resulting from their
failure, or improper maintenance, use, or operation. The Contractor shall be solely and completely
responsible for the conditions of the project site, including safety for all persons and property in the
�rrr performance of the Work. This requirement shall apply continuously, and not be limited to normal
working hours. The required or implied duty of the Engineer to conduct construction review of the
Contractor's performance does not, and shall not, be intended to include review and adequacy of
w�r the Contractor's safety measures, in, on, or near the project site.
1-07.2 State Sales Tax
Delete this section, including its sub-sections, in its entirety and replace it with the following:
+rr �******�
1-07.2(1) General
� The Washington State Department of Revenue has issued special rules on the state sales tax.
Sections 1-07.2(1)through 1-07.2(4) are meant to clarify those rules. The Contractor should contact
the Washington State Department of Revenue for answers to questions in this area. The
� Contracting Agency will not adjust its payment if the Contractor bases a bid on a misunderstood tax
liability.
�r
The Contractor shall include all Contractor-paid taxes in the unit bid prices or other contract
amounts. In some cases, however, state retail sales tax will not be included. Section 1-07.2(3)
�„ describes this exception.
The Contracting Agency will pay the retained percentage only if the Contractor has obtained from
� the Washington State Department of Revenue a certificate showing that all contract-related taxes
have been paid (RCW 60.28.050). The Contracting Agency may deduct from its payments to the
Contractor any amount the Contractor may owe the Washington State Department of Revenue,
,� whether the amount owed relates to this contract or not. Any amount so deducted will be paid into
the proper state fund
r
1-07.2(2) State Sales Tax— Rule 171
WAC 458-20-171, and its related rules, apply to building, repairing, or improving streets, roads, etc.,
which are owned by a municipal corporation, or political subdivision of the state, or by the United
"�" States, and which are used primarily for foot or vehicular traffic. This includes storm or combined
sewer systems within and included as part of the street or road drainage system, and power lines
when such are part of the roadway lighting system. For Work performed in such cases, the
`�"°' Contractor shall include Washington State Retail Sales Taxes in the various unit bid item prices, or
other contract amounts, including those that the Contractor pays on the purchase of the materials,
wr�
31
�
09/08/2017 �'
equipment, or supplies used or consumed in doing the Work. �
1-07.2(2) State Sales Tax— Rule 170
�
WAC 458-20-170, and its related rules, applies to the constructing and repairing of new or existing
buildings, or other structures, upon real property. This includes, but is not limited to;the
construction of streets, roads, highways, etc., owned by the state of Washington; water mains and �
their appurtenances; sanitary sewers and sewage disposal systems unless such sewers and disposal
systems are within, and a part of, a street or road drainage system;telephone,telegraph, electrical
power distribution lines,or other conduits or lines in or above streets or roads, unless such power �
lines become a part of a street or road lighting system; and installing or attaching of any article of
tangible personal property in or to real property,whether or not such personal property becomes a
part of the realty by virtue of installation. �
For Work performed in such cases,the Contractor shall collect from the Contracting Agency, retail
sales tax on the full contract price. The Contracting Agency will automatically add this sales tax to �
each payment to the Contractor. For this reason,the Contractor shall not include the retail sales tax
in the unit bid item prices,or in any other contract amount subject to Rule 170,with the following
exception. �;
Exception:The Contracting Agency will not add in sales tax for a payment the Contractor or a
subcontractor makes on the purchase or rental of tools, machinery, equipment, or consumable �
supplies not integrated into the project. Such sales taxes shall be included in the unit bid item prices
or in any other contract amount.
�
1-07.2(4) Services
The Contractor shall not collect retail sales tax from the Contracting Agency on any contract wholly �
for professional or other services (as defined in Washington State Department of Revenue Rules 138
and 244).
�
1-07.6 Permits and Licenses
Section 1-07.6 is supplemented as follows:
�******�
The Contractor shall ensure that all necessary permits are obtained, and is responsible for reviewing �'
all permits to become familiar with the requirements.
The Contractor and all subcontractors of any tier must obtain a City of Renton Business License
(Contractor). �
The permits, easements, and right of entry documents that have been acquired are available for
inspection and review. �
The Contractor shall be required to comply with all conditions of the permits,easements, and rights
of entry,at no additional cost to the Owner. The Contractor is required to indemnify the Owner �
from claims on all easements and rights of entry.
All other permits, licenses, etc., shall be the responsibility of the Contractor. The Contractor shall �
comply with the special provisions and requirements of each.
�
32
�
+� o9ioai2o��
�
Permits, permission under franchises, licenses and bonds of a temporary nature necessary for and
during the prosecution of the Work, and inspection fees in connection therewith shall be secured
+rr� and paid for by the Contractor. If the Owner is required to secure such permits, permission under
franchises, licenses and bonds, and pay the fees,the costs incurred by the Owner thereby shall be
charged against the Contractor and deducted from any funds otherwise due the Contractor.
�
The Contractor is cautioned to review all permits and other Contract Documents and schedule the
work activities appropriately to complete the work within the number of days stated in the Contract
�r pocument. No additional compensation or extensions to time will be granted to the Contractor due
to the time constraints imposed by such documents. The Contractor shall assume all responsibility
for meeting all requirements of all permits.
�
Any fines or penalties incurred by Contracting Agency for not meeting state water quality standards
and/or lack of stormwater pollution prevention on this Project shall be deducted from monies
�rr otherwise due to Contractor. Any fines assessed directly to Contractor shall be paid directly to the
fining authority, at the Contractor's own cost.
�, 1-07.9 Wages
1-07.9(5) Required Documents
Delete the first sentence of the third paragraph, and replace it with the following:
�, �******�
The Contractor must submit weekly-certified payrolls for the Contractor and all subcontractors and
lower tier subcontractors, regardless of project's funding source.
"�" 1-07.11 Requirements for Non-Discrimination
1-07.11(11) City of Renton Affidavit of Compliance
�,,,,, Section 1-07.11(11) is new:
�******�
Each Contractor, Subcontractor, Consultant, and or Supplier shall complete and submit a copy of the
"City of Renton Fair Practices Policy Affidavit of Compliance". A copy of this document will be bound
� in the bid documents.
1-07.12 Federal Agency Inspection
Section 1-07.12 is supplemented with the following:
� �******)
Required Federal Aid Provisions
The Required Contract Provisions Federal Aid Construction Contracts (FHWA 1273) and the
,,,,,, amendments thereto supersede any conflicting provisions of the Standard Specifications and are
made a part of this contract; provided, however, that if any of the provisions of FHWA 1273, as
amended, are less restrictive than Washington State Law, then the Washington State Law shall
preva i I.
r�r
The provisions of FHWA 1273, as amended, included in this contract require that the Contractor
insert the FHWA 1273 and amendments thereto in each subcontract, together with the wage rates
which are part of the FHWA 1273, as amended. Also, a clause shall be included in each subcontract
`�" requiring the subcontractors to insert the FHWA 1273 and amendments thereto in any lower tier
subcontracts, together with the wage rates. The Contractor shall also ensure that this Section,
REQUIRED FEDERAL AID PROVISIONS, is inserted in each subcontract for subcontractors and lower
,,,�, tier subcontractors. For this purpose, upon request to the Project Engineer, the Contractor will be
provided with extra copies of the FHWA 1273, the amendments thereto, the applicable wage rates,
and this Special Provision.
r
33
rw
o9iosiao i� �
�
1-07.13 Contractor's Responsibility for Work
1-07.13(1) General '>
Section 1-07.13(1) is supplemented as follows: �
�******�
During unfavorable weather and other conditions, the Contractor shall pursue only such portions of
the Work as shall not be damaged thereby. `
No portion of the Work whose satisfactory quality or efficiency will be affected by unfavorable �'
conditions shall be constructed while these conditions exist, unless the Contractor shall be able to
overcome said unfavorable conditions by special means or precautions acceptable to the Engineer.
�
1-07.15 Temporary Water Pollution/Erosion Control
Delete the first paragraph, and replace it with the following:
(******� -
The Contractor shall perform all Work in strict accordance with all Federal, State, and local laws and +�
regulations governing waters of the State, as well as permits acquired for the project.
The Contractor shall prepare a final Temporary Water Pollution/Erosion Control Plan (TWPECP) and
a final SWPPP. �
The TWPECP and SWPPP shall be developed in accordance with the erosion control standards
contained in the 2010 City of Renton Amendments to the King County Surface Water Design
Manual. The plan shall include any assumptions, detailed calculations, sketches and sequencing. �
The plan shall be signed and stamped by a Washington State Professional Engineer. A TESC
supervisor shall be designated by the Contractor,whose name and phone number shall be given to
the Engineer at the Preconstruction Conference. The TESC supervisor must be CESCL certified in +�
accordance with NPDES permit requirements.
The plan shall be submitted for approval to the City within 10 days of the Notice of Award. The
TWPECP shall include the various configurations that may be necessary to adequately control �'
erosion and sediment at the site during the various stages of construction.
Design of dewatering, water control, bypass systems, and temporary erosion and sediment control
during construction shall be the responsibility of the Contractor. '�
At a minimum,the plan shall contain:
1. Manufacturer's data and detailed plans for the erosion control products specified in the
plan. "'��
2. Plan for temporary pipe system diversions. This shall include a description of when the
piping will be used, pipe material, locations, elevations, plan and profile views, inlet and
outlet protection, hydraulic capacity, and details of important design features. �
3. Plan for collecting, pumping and pipe surface stormwater runoff, dewatering discharge, and
seepage from the source to the Baker Tank or acceptable discharge. The plan shall be �
shown in phases to coincide with the phases of construction. The plan shall include:
a. Layout and details of system.
b. Diversion systems manufacturer's data and material submittals. �
c. Pump and pipe types, sizes, manufacturer's data, and design criteria for pump sizing.
d. Flow calculations for stormwater, seepage, and dewatering pump discharge. Schedule ``
and sketch of location for dewatering systems. Pumps shall be sized to pump �
stormwater runoff for the tributary area plus an allowance for groundwater and surface
seepage. Each pump area location shall be equipped with two pumps meeting the
capacity requirement, in case one is non-operational. �
�
34
�
� o9ioaizo��
+iw e. Source of power for pumps, description of schedule and fueling requirements, storage
location, and methods.
4. Manufacturer's literature and test results (certificates) on the temporary silt fence, erosion
'�" control matting, riprap gradations, and any other necessary erosion control materials.
5. Planned installation and maintenance schedule for temporary erosion and sedimentation
�
control facilities. Indicate locations and outlets of dewatering systems.
The Contractor shall also prepare a final SWPPP. The SWPPP must meet the requirements of the
Department of Ecology's NPDES and State Waste Discharge General Permit for Stormwater
� Discharges Associated With Construction Activity(General Permit).The SWPPP shall include and
modify as necessary the Site Preparation and Erosion Control Plan drawings provided as part of the
Contract Plans.The Contractor shall prepare, review, and modify the SWPPP as necessary to be
� consistent with the actual work schedule, sequencing, and construction methods that will be used
on the project.The Contractor's SWPPP shall meet the requirements of the general permit.
The Contractor shall:
�, • Furnish, install, operate, and maintain necessary machinery, appurtenances, and equipment
to keep excavations free of water during construction;
• Dewater and dispose of water in a manner that will not cause injury to public and private
� property, as well as keep sediment-laden water from entering the City surface water system
or violate applicable water standards;
• Keep sufficient pumping equipment and machinery on hand at all times for emergencies,
""' including electric power failures;
� Keep experienced personnel available at all times to operate pumping equipment,
�r
machinery and appliances;
• Not shut down dewatering systems between shifts, on holidays and weekends, nor during
work stoppages without prior authorization by the Engineer;
+� • Control groundwater to prevent softening of bottoms of excavations, or formation of
"quick" conditions or"boils";
• Design and operate dewatering system that will not remove natural soils;
�
• Keep excavations free of water during excavation, construction of structures, installation of
pipelines, placing of structures, backfill,and placing and curing of concrete; and
� • Control surface water runoff to prevent entry and collection in excavations.
As construction progresses and unexpected or seasonal conditions dictate,the Contractor shall
anticipate that more water pollution/erosion control measures will be necessary. It shall be the
.+r obligation and responsibility of the Contractor to revise or supplement the pollution/erosion control
measures as may be needed to protect the work, adjacent properties, storm drains, streams,and
other water bodies.
�rr At all times,there must be material on the job site to handle any spills caused by the Contractor,
such as tack, oils, diesel, etc. Materials would include, but not be limited to, oil absorbent pads and
"kitty litter." The Contractor must supply said materials at his expense and, in the event of a spill, be
�. responsible for cleanup and disposal of contaminated materials.
In addition,the SWPPP shall outline the procedures to be used to prevent high pH stormwater or
dewatering water from entering surface waters.The plan shall include how the pH of the water will
+� be maintained between pH 6.5 and pH 8.5 prior to being discharged from the project or entering
surface waters. Prior to beginning any concrete or grinding work,the Contractor shall submit the
plan,for the Engineer's review and approval.
�
35
�w
09/08/2017 �
An Ecology template is available to the Contractor for producing the SWPPP, using project-specific �
information added by the Contractor.The template and instructions are available at:
http•//www ecy wa �ov/pra�rams/wqlstarmwater/constructian.
The Engineer's review and any resulting approval of the Contractor's SWPPP and TESCP will be only „�
regarding conformance with the specification requirement that the Contractor have the plans
prepared by a CPESC or professional Civil Engineer who has expertise in the type of facilities and
that the SWPPP and TESCP include the items specified for such plans.The Contractor shall be solely �
responsible for the adequacy of the SWPPP and TESCP and if erosion sediment, and other pollutant
control measures in deviation or addition to those described in the SWPPP become necessary to
minimize erosion and prevent storm water contamination from sediment and other pollutants,the �
Contractor shall prepare and submit a revised SWPPPP to the Engineer for review as specified for
the original plan.
The Owner will not be liable to the Contractor for failure to accept all or any portion of an originally ,�
submitted or revised SWPPP, nor for any delays to the Work due to the Contractor's failure to
submit and implement an acceptable SWPPP.
�
1-07.16 Protection and Restoration of Property
1-07.16(1) Private/Public Property
Section 1-07.16(1) is supplemented by adding the following: rrr►
�******�
The Contracting Agency will obtain all easements and franchises required for the project. The
Contractor shall limit his operation to the areas obtained and shall not trespass on private property.
�
The Contracting Agency may provide certain lands, as indicated in connection with the Work under
the Contract together with the right of access to such lands. The Contractor shall not unreasonably
encumber the premises with his equipment or materials. ,�,
The Contractor shall provide, with no liability to the Contracting Agency, any additional land and
access thereto not shown or described that may be required for temporary construction facilities or
storage of materials. He shall construct all access roads, detour roads, or other temporary Work as �r
required by his operations. The Contractor shall confine his equipment, storage of material, and
operation of his workers to those areas shown and described and such additional areas as he may
provide.
�
A. General. All construction Work under this contract on easements, right-of-way, over
private property or franchise, shall be confined to the limits of such easements, right-of-way or
franchise. All Work shall be accomplished so as to cause the least amount of disturbance and a �y
minimum amount of damage. The Contractor shall schedule his Work so that trenches across
easements shall not be left open during weekends or holidays and trenches shall not be open for
more than 48 hours.
�i
B. Structures. The Contractor shall remove such existing structures as may be necessary for
the performance of the Work and, if required, shall rebuild the structures thus removed in as good a
condition as found. He shall also repair all existing structures that may be damaged as a result of the �
Work under this contract.
C. Easements, cultivated areas and other surface improvements. All cultivated areas, either
agricultural or lawns, and other surface improvements which are damaged by actions of the �
Contractor shall be restored as nearly as possible to their original condition.
Prior to excavation on an easement or private right-of-way,the Contractor shall strip topsoil from the
trench or construction area and stockpile it in such a manner that it may be replaced by him, upon
completion of construction. Ornamental trees and shrubbery shall be carefully removed with the rr
earth surrounding their roots wrapped in burlap and replanted in their original positions within 48
hours.
�
36
�
+�+ 09/08/2017
�
All shrubbery or trees destroyed or damaged, shall be replaced by the Contractor with material of
equal quality at no additional cost to the Contracting Agency. In the event that it is necessary to
trench through any lawn area,the sod shall be carefully cut and rolled and replaced after the
� trenches have been backfilled. The lawn area shall be cleaned by sweeping or other means, of all
earth and debris.
The Contractor shall use rubber wheel equipment similar to the small tractor-type backhoes used by
""� side sewer contractors for all Work, including excavation and backfill, on easements or rights-of-way,
which have lawn areas. All fences, markers, mailboxes, or other temporary obstacles shall be
removed by the Contractor and immediately replace,after the trench is backfilled, in their original
�„ position. The Contractor shall notify the Contracting Agency and Property Owner at least 24 hours in
advance of any Work done on easements or rights-of-way.
Damage to existing structures outside of easement areas that may result from dewatering and/or
� other construction activity under this contract shall be restored to their original condition or better.
The original condition shall be established by photographs taken and/or inspection made prior to
construction. All such Work shall be done to the satisfaction of the Property Owners and the
`rr
Contracting Agency at the expense of the Contractor.
D. Streets. The Contractor will assume all responsibility of restoration of the surface of all
streets(traveled ways) used by him if damaged.
�
In the event the Contractor does not have labor or material immediately available to make necessary
repairs,the Contractor shall so inform the Contracting Agency. The Contracting Agency will make the
necessary repairs and the cost of such repairs shall be paid by the Contractor.
�r
The Contractor is responsible for identifying and documenting any damage that is pre-existing or
caused by others. Restoration of excavation in City streets shall be done in accordance with the City
of Renton Trench Restoration Requirements, which is available at the Public Works Department
�` Customer Services counter on the 6th floor, Renton City Hall, 1055 South Grady Way.
1-07.17 Utilities and Similar Facilities
,� Section 1-07.17 is supplemented by adding:
�******�
Existing utilities indicated in the Plans have been plotted from the best information available to the
Engineer. Information and data shown or indicated in the Contract Documents with respect to
+�► existing underground utilities or services at or contiguous to the project site are based on
information and data furnished to the Owner and the Engineer by owners of such underground
facilities or others, and the Owner and the Engineer do not assume responsibility for the accuracy or
completeness thereof. It is to be understood that other aboveground or underground facilities not
'�" shown in the Plans may be encountered during the course of the Work.
All utility valves, manholes,vaults, or pull boxes which are buried shall be conspicuously marked in a
,,,,, fashion acceptable to the Owner and the Engineer by the Contractor to allow their location to be
determined by the Engineer or utility personnel under adverse conditions, (inclement weather or
darkness).
� Where underground main distribution conduits, such as water, gas, sewer, electric power, or
telephone, are shown on the Plans, the Contractor, for the purpose of preparing his bid, shall
assume that every property parcel will be served by a service connection for each type of utility.
`�" The Contractor shall check with the utility companies concerning any possible conflict prior to
commencing excavation in any area. The Contractor shall resolve all crossing and clearance
problems with the utility company concerned. No excavation shall begin until all known facilities, in
,,,,,, the vicinity of the excavation area, have been located and marked.
In addition to the Contractor having all utilities field marked before starting Work, the Contractor
�
37
�
,,ia
09/08/2017 �
shall have all utilities field marked after they are relocated in conjunction with this project. �
Call Before You Dig
The 48-Hour Locators
1-800-424-5555 �
At least 2 and not more than 10 working days prior to commencing any excavations for utility
potholing or for any other purpose under this Contract, the Contractor shall notify the Underground
Utilities Location Center by telephone of the planned excavation and progress schedule. The '�
Contractor is also warned that there may be utilities on the project that are not part of the One Call
system. They must be contacted directly by the Contractor for locations.
The Contractor shall make arrangements 48 hours in advance with respective utility owners to have �
a representative present when their utility is exposed or modified, if the utility chooses to do so.
Existing utilities for telephone, power, gas, water, and television cable facilities shall be adjusted or ,�
relocated by the appropriate utility company unless otherwise noted in the Plans. These
adjustments may be completed before the Contractor begins Work, or may be performed in
conjunction with the Contract Work. The Contractor shall be entirely responsible for coordination `
with the utility companies and arranging for the movement or adjustment, either temporary or 'i"�
permanent, of their facilities within the project limits. See also Section 1-05.14 of these Special
Provisions.
If or when utility conflicts occur, the Contractor shall continue the construction process on other �
aspects of the project whenever possible. No additional compensation will be made to the
Contractor for reason of delay caused by the actions of any utility company, and the Contractor shall
consider such costs to be incidental to the other items of the Contract. �r
Utility Potholing �
Potholing may be included as a bid item for use in determining the location of existing utilities in
advance of the Contractor's operations. If potholing is not included as a bid item then it shall be "'�'
considered incidental to other Work. The Contractor shall submit all potholing requests to the
Engineer for approval, at least 2 working days before potholing is scheduled. Additionally, the
Contractor shall provide potholing at the Engineer's request. ,�,
In no way shall the Work described under Utility Potholing relieve the Contractor of any of the
responsibilities described in Section 1-07.17 of the Standard Specifications and Special Provisions,
and elsewhere in the Contract Documents. �
1-07.17(1) Site Specific Potholing
Section 1-07.17(1) is a new section: "�
�******�
Site Specific Potholing is intended to be additional potholing as directed by the Engineer, which is in
addition to potholing included as incidental for utility installation. Where underground utilities are �rr
found to be in the way of construction, such condition shall not be deemed to be a changed or
differing site condition, and if necessary, pipe alignment or grade shall be modified. No payment will
be made unless potholing has been performed prior to trench excavation, and witnessed by the �i
Engineer. Different utilities may be found to occupy a common trench. Any two or more utilities
separated by 3 feet or less shall constitute one locate. Where multiple utilities exist in close
proximity, the Contractor shall be paid for one locate for every 5 feet of exploration trench. The �
quantity for this item is included to provide a common proposal for bid purposes. The actual
quantity used in construction may vary from that amount. The unit price will not be adjusted if the
actual quantity used varies by more than 25 percent. +�
The contractor shall perform for this potholing a minimum of five working days prior to crossing to
�
38
�
� o9iosi2o��
+rr� allow for potential revisions. The contractor shall not have cause for claim of down-time or any
other additional costs associated with 'waiting' if the owner provides design revisions (related to the
information supplied per this section) within three working days after the contractor provides the
�rr surveyed elevations.
In no way shall the Work described under Site Specific Potholing relieve the Contractor of any of the
� responsibilities described in Section 1-07.17 of the Standard Specifications and Special Provisions,
and elsewhere in the Contract Documents.
„�, 1-07.17(3) Interruption of Services
Section 1-07.17(3) is a new section:
�******�
Whenever in the course of the construction operation it becomes necessary to cause an outage of
'�" utilities, it shall be the Contractor's responsibility to notify the affected users and the Engineer not
less than 48 hours in advance of such outage. The Contractor shall make reasonable effort to
minimize the duration of outages, and shall estimate the length of time service will be interrupted
� and so notify the users. In the case of any utility outage that has exceeded or will exceed four hours,
user contact shall again be made. Temporary service, if needed, will be arranged by the Contractor
at no cost to the Owner.
�,,, Overhead lighting outages shall not exceed 24 hours. All cost to the Contractor for providing
temporary overhead lighting to meet above requirements shall be incidental to the various unit and
Lump sum items of the Contract; no separate payment will be made.
+� 1-07.17(4) Resolution of Utility Conflicts
�******)
Section 1-07.17(4) is a new section:
�
In no way shall the work described under Resolution of Utility Conflicts relieve Contractor of any of
the responsibilities described in Section 1-07.17 of the Standard Specifications and Special
�.r Provisions, and elsewhere in the Contract Documents. If or when utility conflicts occur, Contractor
shall continue the construction process on other aspects of the project whenever possible.
wr If"Resolution of utility conflicts" is included as a bid item in Section 1-09.14, it shall be used to
resolve any new identified utility conflicts not otherwise shown on the Contract Drawing or
Specifications that are identified during the course of construction.
�
1-07.18 Public Liability and Property Damage Insurance
Section 1-07.18 is deleted replaced by the following new section and subsections:
,r�, �******)
1-07.18(1) General
� The Contractor shall obtain and maintain in full force and effect, from the Contract Execution Date to
the Completion Date, public liability and property damage insurance with an insurance company(ies)
or through sources approved by the State Insurance Commissioner pursuant to RCW 48.
wr, The Contractor shall not begin work under the Contract until the required insurance has been
obtained and approved by the Contracting Agency. Insurance shall provide coverage to the
Contractor, all subcontractors, Contracting Agency and the Contracting Agency's consultant. The
coverage shall protect against claims for bodily injuries, personal injuries, including accidental death,
'�" as well as claims for property damages which may arise from any act or omission of the Contractor
or the subcontractor, or by anyone directly or indirectly employed by either of them.
�
39
�
09/08/2017 �
If warranted work is required the Contractor shall provide the City proof that insurance coverage and �
limits established under the term of the Contract for work are in full force and effect during the
period of warranty work.
The Contracting Agency may request a copy of the actual declaration pages(s) for each insurance �
policy effecting coverage(s) required on the Contract prior to the date work commences.
Failure of the Contractor to fully comply during the term of the Contract with the requirements
described herein will be considered a material breach of contract and shall be caused for immediate �
termination of the Contract at the option of the Contracting Agency.
All costs for insurance shall be incidental to and included in the unit or Lump Sum prices of the �
contract and no additional payment will be made.
1-07.18(2) Coverages
All coverage provided by the Contractor shall be in a form and underwritten by a company �i
acceptable to the Contracting Agency. The City requires that all insurers:
1. Be licensed to do business within the State of Washington.
2. Coverage to be on an "occurrence" basis (Professional Liability and Pollution coverage �
are acceptable when written on a claims-made basis). The City may also require
proof of professional liability coverage be provided for up to two (2) years after the
completion of the project. �
3. The City may request a copy of the actual declaration page(s) for each insurance
policy affecting coverage(s) required by the Contract prior to the date work
commences.
4. Possess a minimum A.M. best rating of AVII (A rating of A XII or better is preferred.) If ,ir,
any insurance carrier possesses a rating of less than AVII, the City may make an
exception.
The City reserves the right to approve the security of the insurance coverage provided by the �
insurance company(ies),terms, conditions, and the Certificate of Insurance.
Failure of the Contractor to fully comply during the term of the Contract with these �
requirements will be considered a material breach of contract and shall be cause for immediate
termination of the contract at the option of the City.
The Contractor shall obtain and maintain the minimum insurance coverage set forth below. By ,i„�,
requiring such minimum insurance, the City of Renton shall not be deemed or construed to
have assessed the risks that may be applicable to the Contractor. The Contractor shall assess its
own risks and if it deems appropriate and/or prudent, maintain higher limits and/or broader `�
coverage. "�
Coverage shall include:
A. Commercial General Liability- ISO 1993 Form or equivalent. Coverage will be written �
on an occurrence basis and include:
• Premises and Operations (including CG2503; General Aggregate to apply per
project, if applicable) , �rii
• Explosion, Collapse, and Underground Hazards.
• Products/Completed Operations
• Contractual Liability (including Amendatory Endorsement CG 0043 or ";
equivalent which includes defense coverage assumed under contract) �
• Broad Form Property Damage
• Independent Contractors
• Personal/Advertising Injury �
• Stop Gap Liability
B. Automobile Liability including all
�
40
�
'� 09/08/2017
+rr • Owned Vehicles
• Non-Owned Vehicles
• Hired Vehicles
C. Workers' Compensation
""" • Statutory Benefits (Coverage A) - Show Washington Labor & Industries
Number
D. Umbrella Liability (when necessary)
• Excess of Commercial General Liability and Automobile liability. Coverage
� should be as broad as primary.
E. Professional Liability - (whenever the work under this Contract includes Professional
Liability, including Advertising activities) the jCONTRACTORI shall maintain
,rr professional liability covering wrongful acts, errors and/or omissions of the
(CONTRACTORI for damage sustained by reason of or in the course of operations
under this Contract.
F. Pollution Liability - the City may require this coverage whenever work under this
"'�' Contract involves pollution risk to the environment. This coverage is to include
sudden and gradual coverage for third party liability including defense costs and
completed operations.
� Contractor shall name City of Renton, and its ofFicers, officials, agents, employees and
volunteers as Additional Insured (I50 Form CG 2010 or equivalent).The Contractor shall provide
City of Renton Certificates of Insurance prior to commencement of work. The City reserves the
� right to request copies of insurance policies, if at their sole discretion it is deemed appropriate.
Further, all policies of insurance described above shall:
A. Be on a primary basis not contributory with any other insurance coverage and/or self-
'�" insurance carried by City of Renton.
B. Include a Waiver of Subrogation Clause.
C. Severability of Interest Clause (Cross Liability)
� D. The Contractor shall provide the Contracting Agency and all Additional Insured's with
written notice of any policy cancellation, within two business days of their receipt of
such notice.
E. Failure on the part of the Contractor to maintain the insurance as required shall
;r constitute a material breach of contract, upon which the Contracting Agency may,
after giving five business days notice to the Contractor to correct the breach,
immediately terminate the contract or, at its discretion, procure or renew such
insurance and pay any and all premiums in connection therewith, with any sums so
"'r' expended to be repaid to the Contracting Agency on demand, or at the sole
discretion of the Contracting Agency, offset against funds due the Contractor from
the Contracting Agency.
rr
1-07.18(3) Limits
LIMITS REQUIRED
„�, Providing coverage in these stated amounts shall not be construed to relieve the Contractor from
liability in excess of such limits. The Contractor shall carry the following limits of liability as required
below:
� Commercial General Liabilitv
General Aggregate* $2,000,000 **
Products/Completed Operations Aggregate $2,000,000 **
� Each Occurrence Limit $1,000,000
Personal/Advertising Injury $1,000,000
Fire Damage(Any One Fire) $50,000
Medical Payments(Any One Person) $5,000
,� Stop Gap Liability $1 000 000
* General Aggregate to apply per project �
(I50 Form CG2503 or equivalent)
�
41
�
09/08/2017 �
**Amount may vary based on project risk �
Automobile Liabilitv
Bodily Injury/Property Damage $1,000,000
(Each Accident) >�
Workers' Compensation '�
Statutory Benefits-Coverage A Variable
(Show Washington Labor and Industries Number)
Umbrella Liabilitv �
Each Occurrence Limit $1,000,000
General Aggregate limit $1,000,000
Products/Completed Operations Aggregate $1,000,000
Professional Liabilitv(If required) �
Each Occurrence/Incident/Claim $1,000,000
Aggregate $2,000,000
Pollution Liabilitv(If required)to applv on a per proiect �
basis
Per Loss $1,000,000
Aggregate $1,000,000 :
�
The City may require the Contractor to keep professional liability coverage in effect for up to two (2)
years after completion of the project.
The Contractor shall promptly advise the CITY OF RENTON in the event any general aggregates are �
reduced for any reason, and shall reinstate the aggregate at the Contractor's expense to comply with
the minimum limits and requirements as stated above and shall furnish to the CITY OF RENTON a
new certificate of insurance showing such coverage is in force. �
�y
1-07.18(4) Evidence of Insurance:
+�r
Within 20 days of award of the Contract, the Contractor shall provide evidence of insurance by
submitting to the Contracting Agency the Certificate of Insurance (ACORD Form 25s or equivalent)
conforming to items as specified in Sections 1-07.18(1), 1-07.18(2), and 1-07.18(3) as revised above. �
Other requirements are as follows:
A. Strike the following or similar wording: "This Certificate is issued as a matter of
information only and confers no rights upon the Certificate Holder". „�
B. Strike the wording regarding cancellation notification to the City: "Failure to mail
such notice shall impose no obligation or liability of any kind upon the company,
its agents or representatives".
C. Amend the cancellation clause to state: "Should any of the above described +�►
policies be cancelled before the expiration date thereof, notice will be delivered
in accordance with the policy provisions."
For Professional Liability coverage only, instead of the cancellation language specified above, the "�
City will accept a written agreement that the consultant's broker will provide the required
notification.
�
1-07.22 Use of Explosives
Section 1-07.22 is supplemented by the following:
�******) rr
Explosives shall not be used without specific authority of the Engineer, and then only under such
restrictions as may be required by the proper authorities. Explosives shall be handled and used in
strict compliance with WAC 296-52 and such local laws, rules and regulations that may apply. The �
individual in charge of the blasting shall have a current Washington State Blaster Users License.
The Contractor shall obtain, comply with, and pay for such permits and costs as are necessary in
+�
42
�
� o9iosi2o��
„rr conjunction with blasting operations.
1-07.23 Public Convenience and Safety
irr
1-07.23(1) Construction Under Traffic
Revise the second paragraph to read:
�******)
�
To disrupt public traffic as little as possible, the Contractor shall permit traffic to pass through the
Work with the least possible inconvenience or delay. The Contractor shall maintain existing roads,
�rr
streets, sidewalks, drivewavs, and paths within the project limits, keeping them open, and in good,
clean, safe condition at all times. Deficiencies caused by the Contractor's operations shall be
repaired at the Contractor's expense. Deficiencies not caused by the Contractor's operations shall
� be repaired by the Contractor when directed by the Engineer, at the Contracting Agency's expense.
The Contractor shall also maintain roads, streets, sidewalks, drivewavs, and paths adjacent to the
project limits when affected by the Contractor's operations. Snow and ice control will be performed
�
by the Contracting Agency on all projects. Cleanup of snow and ice control debris will be at the
Contracting Agency's expense. The Contractor shall perform the following:
1. Remove or repair any condition resulting from the Work that might impede traffic or create a
irr
hazard.
2. Keep existing traffic signal and highway lighting systems in operation as the Work proceeds.
"O (The Contracting Agency will continue the route maintenance on such system.)
3. Maintain the striping on the roadway at the Contracting Agency's expense. The Contractor shall
"" be responsible for scheduling when to renew striping, subject to the approval of the Engineer.
When the scope of the project does not require Work on the roadway, the Contracting Agency
will be responsible for maintaining the striping.
�rr
4. Maintain existing permanent signing. Repair of signs will be at the Contracting Agency's
expense, except those damaged due to the Contractor's operations.
�
5. Keep drainage structures clean to allow for free flow of water. Cleaning of existing drainage
structures will be at the Contracting Agency's expense when approved by the Engineer, except
� when flow is impaired due to the Contractor's operations.
Section 1-07.23(1) is supplemented by adding the following:
(******�
�
The Contractor shall be responsible for controlling dust and mud within the project limits and on any
street, which is utilized by his equipment for the duration of the project. The Contractor shall be
prepared to use watering trucks, power sweepers, and other pieces of equipment as deemed
�"' necessary by the Engineer,to avoid creating a nuisance.
Dust and mud control shall be considered as incidental to the project and no compensation will be
;�, made for this section.
Complaints of dust, mud, or unsafe practices and/or property damage to private ownership will be
transmitted to the Contractor and prompt action in correcting them will be required by the
rr� Contractor.
The Contractor shall maintain the roads during construction in a suitable condition to minimize
r�r
43
�r
o9ioaizo�� +�
affects to vehicular and pedestrian traffic. All cost to maintain the roads shall be borne by the �
Contractor.
At least one-way traffic shall be maintained on all cross-streets within the project limits during
working hours. One lane shall be provided in each direction for all streets during non-working hours. �
The Contractor shall provide one drivable roadway lane and maintain convenient access for local and
commuter traffic to driveways, businesses, and buildings along the line of Work throughout the �
course of the project. Such access shall be maintained as near as possible to that which existed prior
to the commencement of construction. This restriction shall not apply to the paving portion of the
construction process.
�
The Contractor shall notify and coordinate with all property owners and tenants of street closures, or
other restrictions which may interfere with their access at least 24 hours in advance for single-family
residential property, and at least 48 hours in advance for apartments, offices, and commercial
property. The Contractor shall give a copy of all notices to the Engineer. �
When the abutting owners' access across the right-of-way line is to be eliminated and replaced
under the Contract by other access, the existing access shall not be closed until the replacement =
access facility is available. �
All unattended excavations shall be properly barricaded and covered at all times. The Contractor
shall not open any trenches that cannot be completed and refilled that same day. Trenches shall be ,,,�
patched or covered by a temporary steel plate, at the Contractor's expense, except in areas where
the roadway remains closed to public traffic. Steel plates must be anchored.
1-07.23(2) Construction and Maintenance of Detours �
�******)
Revise the first paragraph to read:
�
Unless otherwise approved, the Contractor shall maintain two-way traffic during construction. The
Contractor shall build, maintain in a safe condition, keep open to traffic, and remove when no longer
needed: „�
1. Detours and detour bridges that will accommodate traffic diverted from the roadway, bridge,
sidewalk,drivewav, or path during construction,
2. Detour crossings of intersecting highway, and �
3. Temporary approaches.
1-07.24 Rights-of-Way ,,,�►
Delete this section in its entirety, and replace it with the following:
�******)
Street right-of-way lines, limits of easements, and limits of construction permits are indicated on the -
Drawings. The Contractor's construction activities shall be confined within these limits unless '�
arrangements for use of private property are made.
Generally, the Contracting Agency will have obtained, prior to bid opening, all rights-of-way and ,�
easements, both permanent and temporary, necessary for carrying out the completion of the Work.
Exceptions to this are noted in the Contract Documents or brought to the Contractor's attention by a
duly issued addendum.
�
Whenever any of the Work is accomplished on or through property other than public right-of-way,
the Contractor shall meet and fulfill all covenants and stipulations of any easement agreement
obtained by the Contracting Agency from the owner of the private property. Copies of the easement `
agreements are included in the Contract Provisions or made available to the Contractor as soon as '�
practical after they have been obtained by the Engineer.
�
44
�
+� 09/08/2017
,�,,,, Whenever easements or rights-of-entry have not been acquired prior to advertising, these areas are
so noted on the Drawings. The Contractor shall not proceed with any portion of the Work in areas
where right-of-way, easements, or rights-of-entry have not been acquired until the Engineer certifies
to the Contractor that the right-of-way or easement is available or that the right-of-entry had been
"� received. If the Contractor is delayed due to acts of omission on the part of the Contracting Agency
in obtaining easements, rights of entry of right-of-way, the Contractor will be entitled to an
extension of time.The Contractor agrees that such delay shall not be a breach of contract.
� Each property owner shall be given 48 hours notice prior to entry by the Contactor. This includes
entry onto easements and private property where private improvements must be adjusted.
,r�r The Contractor shall be responsible for providing, without expense or liability of the Contracting
Agency, any additional land and access thereto that the Contractor may desire for temporary
construction facilities, storage of materials, or other Contractor needs. However, before using any
private property, whether adjoining the Work or not, the Contractor shall file with the Engineer a
""' written permission of the private property owner, and, upon vacating the premises, a written release
from the property owner of each property disturbed or otherwise interfered with by reasons of
construction pursued under this Contract. The statement shall be signed by the private property
� owner, or proper authority acting for the owner of the private property affected, stating that
permission has been granted to use the property and all necessary permits have been obtained or, in
the case of a release, that the restoration of the property has been satisfactorily accomplished. The
statement shall include the parcel number, address and date of signature. Written releases must be
„�, filed with the Engineer before the Completion Date will be established.
1-07.28 Confined Space Entry
,�„ Section 1-07.28 is new:
The Contractor shall:
1. Review and be familiar with the City's Public Works Confined Space Entry Program.
,rr 2. Review documented information about the City confined spaces in which entry is intended
as listed and described in the City's Attribute and Map Book. This information includes
identified hazards for each permit-required confined space.
'� 3. Each contractor shall have their own confined space entry program. Upon request of the
City they will provide a statement confirming they are in compliance with their confined
space entry program including requirements for confined space training for employees
� associated with the project in Renton.
4. Be responsible for following all confined space requirements established by the provisions in
WAC 296-809 and its chapters.
�rs
5. Coordinate entry operations with the City of Renton when employees from the contractor
will be working in or near City confined spaces.
,�„ 6. Discuss entry operations with the City of Renton including the program followed during
confined space entry.
7. Debrief the City on any hazards confronted or created at the completion of entry
+r operations.
8. Place signs stating, "Danger, Follow Confined Space Entry Procedure before Entering" at
each confined space to be entered. Never leave the confined space open and unattended.
'w' The contractor's or consultant's point of contact with the City in regard to confined space entry will
be the City's assigned construction inspector.
,rr
r�rr
45
+�r
09/08/2017 �
�
1-08 PROSECUTION AND PROGRESS
1-08.0 Preliminary Matters „�,
Section 1-08.0 is a new section with subsection:
(******�
1-08.0(1) Preconstruction Conference �w►
Section 1-08.0(1) is a new subsection:
�******�
The Engineer will furnish the Contractor with copies of the Contract Documents per Section 1-02.2 �
"Plans and Specifications". Additional documents may be furnished upon request at the cost of
reproduction. Prior to undertaking each part of the Work the Contractor shall carefully study and
compare the Contract Documents, and check and verify pertinent figures shown therein and all
applicable field measurements. The Contractor shall promptly report in writing to the Engineer any „�
conflict, error or discrepancy, which the Contractor may discover.
After the Contract has been executed, but prior to the Contractor beginning the Work, a
preconstruction conference will be held between the Contractor, the Engineer and such other 'rr►
interested parties as may be invited.
The Contractor shall prepare and submit at the preconstruction meeting: �
� Contractor's plan of operation and progress schedule(3+copies)
� Approval of qualified subcontractors (bring list of subcontractors if different from list
submitted with bid)
� List of materials fabricated or manufactured off the project �
� Material sources on the project
� Names of principal suppliers
� Detailed equipment list, including "Rental Rate Blue Book" hourly costs (both working
and standby rates) �►
� Weighted wage rates for all employee classifications anticipated to be used on Project
� Cost percentage breakdown for lump sum bid item(s)
� Shop Drawings (bring preliminary list) '
� Traffic Control Plans (3+copies) '�`
� Temporary Water Pollution/Erosion Control Plan
In addition,the Contractor shall be prepared to address: ,,,�,
Bonds and insurance
Project meetings—schedule and responsibilities
Provision for inspection for materials from outside sources
Responsibility for locating utilities +�
Responsibility for damage
Time schedule for relocations, if by other than the Contractor
Compliance with Contract Documents
Acceptance and approval of Work '�
Labor compliance, payrolls, and certifications
Safety regulations for the Contractors' and the Owner's employees and
representatives ,;,�
Suspension of Work,time extensions
Change order procedures
Progress estimates, procedures for payment
Special requirements of funding agencies +�
Construction engineering, advance notice of special Work
Any interpretation of the Contract Documents requested by the Contractor
Any conflicts or omissions in Contract Documents �
Any other problems or questions concerning the Work
Processing and administration of public complaints
Easements and rights-of-entry
�
46
�
� 09/08/2017
�rr Other contracts
The franchise utilities may be present at the preconstruction conference, and the Contractor should
be prepared for their review and discussion of progress schedule and coordination.
�rr
1-08.0(2) Hours of Work
Section 1-08.0(2) is a new subsection:
�******)
�
Except in the case of emergency or unless otherwise approved by the Contracting Agency, the
normal straight time working hours for the Contract shall be any consecutive 8-hour period between
„�„r 7:00 a.m. and 5:00 p.m. of a working day with a maximum 1-hour lunch break and a 5-day Work
week. The normal straight time 8-hour working period for the Contract shall be established at the
preconstruction conference or prior to the Contractor commencing the Work.
'Y" If a Contractor desires to perform Work before 7:00 a.m. or after 5:00 p.m. on any day, the
Contractor shall apply in writing to the Engineer for permission to Work such times. Permission to
Work longer than an 8-hour period between 7:00 a.m. an5:00 p.m. is required. Such requests shall
� be submitted to the Engineer no later than noon on the working day prior to the day for which the
Contractor is requesting permission to Work.
Permission to Work between the hours of 10:00 p.m. and 7:00 a.m. during weekdays and between
,w,r the hours of 10:00 p.m. and 7:00 a.m. on weekends or holidays may also be subject to noise control
requirements. Approval to continue Work during these hours may be revoked at any time the
Contractor exceeds the Contracting Agency's noise control regulations or complaints are received
from the public or adjoining property owners regarding the noise from the Contractor's operations.
� The Contractor shall have no claim for damages or delays should such permission be revoked for
these reasons.
� Permission to Work Saturdays, Sundays, holidays or other than the agreed upon normal straight time
working hours Monday through Friday may be given subject to certain other conditions set forth by
the Contracting Agency or the Engineer. These conditions may include but are not limited to:
requiring the Engineer or such assistants as the Engineer may deem necessary to be present during
� the Work; requiring the Contractor to reimburse the Contracting Agency for the cost of engineering
salaries paid Contracting Agency employees who worked during such times; considering the Work
performed on Saturdays, Sundays, and holidays as working days with regards to the Contract Time;
and considering multiple Work shifts as multiple working days with respect to Contract Time even
� though the multiple shifts occur in a single 24-hour period. Assistants may include, but are not
limited to, survey crews; personnel from the material testing labs; inspectors; and other Contracting
Agency employees when in the opinion of the Engineer such Work necessitates their presence.
'�" 1-08.0(3) Reimbursement for Overtime Work of Contracting Agency Employees
Section 1-08.0(3) is a new subsection:
�******�
y,,, Where the Contractor elects to Work on a Saturday,Sunday, holiday, or longer than an 8-hour Work
shift on a regular working day, as defined in the Standard Specifications, such Work shall be
considered as overtime Work. On all such overtime Work an inspector will be present, and a survey
crew may be required at the discretion of the Engineer.The Contractor shall reimburse the
+�► Contracting Agency for the full amount of the straight time plus overtime costs for employees and
representative(s) of the Contracting Agency required to work overtime hours.
The Contractor by these Specifications does hereby authorize the Engineer to deduct such costs
�01 from the amount due or to become due the Contractor.
1-08.1 Subcontracting
,,,� Revise the second paragraph to read:
The Contractor shall not subcontract Work unless the Engineer approves in writing. Each request to
�rr
47
�
09/08/2017 �
subcontract shall be on the form the Engineer provides. If the Engineer requests, the Contractor ;�
shall provide proof that subcontractor has the experience, ability, and equipment the Work requires.
The Contractor shall require each subcontractor to comply with Section 1-07.9 and to furnish all
certificates and statements required by the Contract. The Contractor shall require each
subcontractor of every tier to meet the responsibility criteria stated in RCW 39.06, and shall include �
these requirements in everv subcontract of every tier.
Section 1-08.1 is supplemented as follows: °
�******� wr
Written requests for change in subcontractors shall be submitted by the Contractor to the Engineer
at least 7 calendar days prior to start of a subcontractor's Work.
�
The Contractor agrees that he/she is fully responsible to the Owner for the acts and omissions of all
subcontractors and lower-tier subcontractors, and persons either directly or indirectly employed by
the subcontractors, as well as for the acts and omissions of persons directly employed by the
Contractor. The Contractor shall be required to give personal attention to the Work that is sublet. �
Nothing contained in the Contract Documents shall create any contractual relation between any
subcontractor and the Owner.
The Contractor shall be responsible for making sure all subcontractors submit all required �
documentation,forms, etc.
1-08.2 Assignment ,;,�
The second paragraph of Section 1-08.2 is modified as follows:
�******�
The Contractor shall not assign any moneys due or to become due to the Contractor hereunder
without the prior written consent of the Owner. The assignment, if approved, shall be subject to all �
setoffs,withholdings, and deductions required by law and the Contract.
1-08.3 Progress Schedule -`�
Section 1-08.3 is supplemented as follows: �
�******�
The progress schedule for the entire project shall be submitted 7 calendar days prior to the
Preconstruction Conference. The schedule shall be prepared using the critical path method (CPM), �
preferably using Microsoft Project or equivalent software. The schedule shall contain this
information, at a minimum:
1. Construction activities, in sufficient detail that all activities necessary to construct a
complete and functional project are considered. Any activity that has a scheduled duration a�
exceeding 30 calendar days shall be subdivided until no sub-element has a duration
exceeding 30 calendar days.
2. The schedule shall clearly indicate the activities that comprise the critical path. For each �
activity not on the critical path,the schedule shall show the float, or slack,time.
3. Procurement of material and equipment.
4. Submittals requiring review by the Engineer. Submittal by the Contractor and review by the
Engineer shall be shown as separate activities. �
5. Work to be performed by a subcontractor, agent, or any third party.
6. Allowances for delays that could result from normal inclement weather(time extensions due
to inclement weather will not be allowed).
7. Allowances for the time required by utilities (Owner's and others) to locate, monitor, and ,ririi
adjust their facilities as required.
The Engineer may request the Contractor to alter the progress schedule when deemed necessary in �
the opinion of the Engineer, in the interest of public safety and welfare of the Owner, or for
coordination with any other activity of other contractors, the availability of all or portions of the job
site, or special provisions of this Contract, or to reasonably meet the completion date of the project.
The Contractor shall provide such revised schedule within 10 days of request. �
If, at any time, in the opinion of the Engineer, the progress of construction falls significantly behind
�
48
w�
�+�► 09/08/2017
,,,, schedule, the Contractor may be required to submit a plan for regaining progress and a revised
schedule indicating how the remaining Work items will be completed within the authorized contract
time.
� The Contractor shall promptly report to the Engineer any conditions that the Contractor feels will
require revision of the schedule and shall promptly submit proposed revisions in the progress
schedule for acceptance by the Engineer. When such changes are accepted by the Engineer, the
�
revised schedule shall be followed by the Contractor.
Weekly Schedule. The Contractor shall submit a weekly progress schedule to the Engineer which
sets forth specific Work to be performed the following week, and a tentative schedule for the second
� week.
Failure to Maintain Progress Schedu/e. The Engineer will check actual progress of the Work against
the progress schedule a minimum of two times per month. Failure, without just cause, to maintain
� progress in accordance with the approved schedule shall constitute a breach of Contract. If, through
no fault of the Contractor, the proposed construction schedule cannot be met, the Engineer will
require the Contractor to submit a revised schedule to the Engineer for acceptance. The approved
�rr
revisions will thereafter, in all respects, apply in lieu of the original schedule.
Failure of the Contractor to follow the progress schedule submitted and accepted, including revisions
thereof, shall relieve the Owner of any and all responsibility for furnishing and making available all or
,,, any portion of the job site, and will relieve the Owner of any responsibility for delays to the
Contractor in the performance of the Work.
The cost of preparing the progress schedule, any supplementary progress schedules, and weekly
�► schedules shall be considered incidental to the Contract and no other compensation shall be made.
1-08.4 Notice to Proceed and Prosecution of the Work
Section 1-08.4 is replaced with the following:
� �******�
Notice to Proceed will be given after the Contract has been executed and the Contract bond and
evidence of insurances have been approved and filed by the Owner. The Contractor shall not
�,,, commence the Work until the Notice to Proceed has been given by the Engineer. The Contractor
shall commence construction activities on the project site within ten days of the Notice to Proceed
date. The Work thereafter shall be prosecuted diligently, vigorously, and without unauthorized
interruption until physical completion of the Work.There shall be no voluntary shutdowns or slowing
� of operations by the Contractor without prior approval of the Engineer. Such approval shall not
relieve the Contractor from the contractual obligation to complete the Work within the prescribed
Contract Time.
� 1-08.5 Time For Completion
The first five paragraphs of Section 1-08.5 are deleted and replaced with the following:
�******�
�,,, The Work shall be physically completed in its entirety within the time specified in the Contract
Documents or as extended by the Engineer.The Contract Time will be stated in "working days", shall
begin on the Notice To Proceed date, or the date identified in the Notice to Proceed as "the first
working day", and shall end on the Contract Completion date.
�
A non-working day is defined as a Saturday, a Sunday, a day on which the Contract specifically
suspends Work, or one of these holidays: January 1, third Monday of January, Memorial Day, July 4,
Labor Day, November 11, Thanksgiving Day, the day after Thanksgiving, and Christmas Day. The day
""` before Christmas shall be a holiday when Christmas Day occurs on a Tuesday or Friday. The day after
Christmas shall be a holiday when Christmas Day occurs on a Monday, Wednesday, or Thursday.
When Christmas Day occurs on a Saturday, the two preceding working days shall be observed as
,�;, holidays. When Christmas day occurs on a Sunday, the two working days following shall be observed
as holidays. When holidays other than Christmas fall on a Saturday, the preceding Friday will be
counted as a non-working day and when they fall on a Sunday the following Monday will be counted
�
49
�
o9iosizo�� �
as a non-working day. The Contract Time has been established to allow for periods of normal �;
inclement weather that, from historical records, is to be expected during the Contract Time, and
during which periods, Work is anticipated to be performed. Each successive working day, beginning
with the Notice to Proceed date and ending with the Physical Completion date, shall be charged to
the Contract Time as it occurs except a day, or part of a day, which is designated a non-working day �
or an Engineer determined unworkable day.
The Engineer will furnish the Contractor a weekly report showing (1) the number of working days
charged against the Contract Time for the preceding week; (2)the Contract Time in working days; (3) '�
the number of working days remaining in the Contract Time; (4) the number of non-working days;
and (5) any partial or whole days the Engineer declared unworkable the previous week. This weekly
report will be correlated with the Contractor's current approved progress schedule. If the Contractor �
elects to work 10 hours a day and 4 days a week (a 4-10 schedule), and the fifth day of the week in
which a 4-10 shift is worked would ordinarily be charged as a working day, then the fifth day of that
week will be charged as a working day whether or not the Contractor works on that day.
�
The Contractor will be allowed 10 calendar days from the date of each report in which to file a
written protest of an alleged discrepancy in the Contract Time as reported. Otherwise, the report
will be deemed to have been accepted by the Contractor as correct. "'
�
The requirements for scheduling the Final Inspection and establishing the Substantial Completion,
Physical Completion, and Completion Dates are specified in Sections 1-05.11 and 1-05.12.
Revise the seventh paragraph to read: �
�******�
The Engineer will give the Contractor written notice of the completion date of the Contract after all
the Contractor's obligations under the Contract have been performed by the Contractor. The '�
following events must occur before the Completion Date can be established:
1. The physical Work on the project must be complete; and +�
2. The Contractor must furnish all documentation required by the Contract and required by law, to
allow the Contracting Agency to process final acceptance of the Contract. The following rr►
documents must be received by the Project Engineer prior to establishing a completion date:
a. Certified Payrolls (Federal-aid Projects) �
b. Material Acceptance Certification Documents
c. Annual Report of Amounts Paid as MBE/WBE Participants or Quarterly Report of
Amounts Credited as DBE Participation, as required by the Contract Provisions. �,�
d. FHWA 47 (Federal-aid Projects)
e. Final Contract Voucher Certification
f. Propertv owner releases per Section 1-07.24 �„i�
Section 1-08.5 is supplemented as follows:
�******�
Within 10 calendar days after execution of the Contract by the Contracting Agency, the Contractor '�
shall provide the Contracting Agency with copies of purchase orders for all equipment items deemed
critical by the Contracting Agency, including but not limited to signal controller materials, lighting
standards, and signal standards required for the physical completion of the Contract. Such purchase �
orders shall disclose the estimated delivery dates for the equipment.
All items of Work that can be performed without delivery of the critical items shall start and be
completed as soon as possible. At that time, the Engineer may suspend the Work upon request of �►
the Contractor until the critical items are delivered to the Contractor, if the Contracting Agency
received a purchase order within 10 calendar days after execution of the Contract by the Contracting
�
50
�
+� 09/08/2017
wr Agency.
The Contractor will be entitled to only one such suspension of time during the performance of the
Work and during such suspension shall not perform any additional Work on the project. Upon
�' delivery of the critical items, contract time will resume and continue to be charged in accordance
with Section 1-08.
1-08.6 Suspension of Work
�"" Section 1-08.6 is supplemented as follows:
�******�
Owner may at any time suspend the Work, or any part thereof, by giving notice to the Contractor in
„�„ writing. The Work shall be resumed by the Contractor within 14 calendar days after the date fixed in
the written notice from the Owner to the Contractor to do so.
The Contractor shall not suspend Work under the Contract without the written order of the Owner.
�
If it has been determined that the Contractor is entitled to an extension of time, the amount of such
extension shall be only to compensate for direct delays, and shall be based upon the Contractor's
diligently pursuing the Work at a rate not less than that which would have been necessary to
� complete the original Contract Work on time.
1-08.7 Maintenance During Suspension
nw, Revise the second paragraph to read:
�******�
At no expense to the Contracting Agency,the Contractor shall provide through the construction area
� a safe, smooth, and unobstructed roadway, sidewalk, drivewav, and path for public use during
suspension (as required in Section 1-07.23 or the Special Provisions). This may include a temporary
road or detour.
'"` 1-08.9 Liquidated Damages
Section 1-08.9 is supplemented as follows:
�******�
,�;,� In addition, the Contractor shall compensate the Owner for actual engineering inspection and
supervision costs and any other expenses and legal fees incurred by the Owner as a result of such
delay. Such labor costs will be billed to the Contractor at actual costs, including administrative
overhead costs.
�
In the event that the Owner is required to commence any lawsuit in order to enforce any provision
of this Contract or to seek redress for any breach thereof, the Owner shall be entitled to recover its
�
costs, including reasonable attorneys fees,from the Contractor.
1-08.11 Contractor's Plant and Equipment
Section 1-08.11 is a new Section:
�
�******�
The Contractor alone shall at all times be responsible for the adequacy, efficiency, and sufficiency of
his and his subcontractor's plant and equipment. The Owner shall have the right to make use of the
Contractor's plant and equipment in the performance of any Work on the site of the Work.
�
The use by the Owner of such plant and equipment shall be considered as extra Work and paid for
accordingly.
'� Neither the Owner nor the Engineer assumes any responsibility, at any time, for the security of the
site from the time the Contractor's operations have commenced until final acceptance of the Work
by the Engineer and the Owner. The Contractor shall employ such measures as additional fencing,
,�, barricades, and watchmen service, as he deems necessary for the public safety and for the
protection of the site and his plant and equipment. The Owner will be provided keys for all fenced,
secured areas.
�
51
�rr
09/08/2017 �
1-08.12 Attention to Work �
Section 1-08.12 is a new section:
�******�
The Contractor shall give his personal attention to and shall supervise the Work to the end that it
shall be prosecuted faithfully, and when he is not personally present on the Work site, he shall at all �
times be represented by a competent superintendent who shall have full authority to execute the
same, and to supply materials, tools, and labor without delay, and who shall be the legal
representative of the Contractor. The Contractor shall be liable for the faithful observance of any �
instructions delivered to him or to his authorized representative.
1-09 MEASUREMENT AND PAYMENT �
1-09.1 Measurement of Quantities
Section 1-09.1 is supplemented by adding the following:
�******� �!
Lump Sum. The percentage of lump sum Work completed, and payment will be based on the cost
percentage breakdown of the lump sum bid price(s)submitted at the preconstruction conference.
The Contractor shall submit a breakdown of costs for each lump sum bid item. The breakdown shall �
list the items included in the lump sum together with a unit price of labor, materials, and equipment
for each item. The summation of the detailed unit prices for each item shall add up to the lump sum
bid. The unit price values may be used as a guideline for determining progress payments or �
deductions or additions in payment for ordered Work changes.
Cubic Yard Quantities. The Contractor shall provide truck trip tickets for progress payments only in
the following manner. Where items are specified to be paid by the cubic yard, the following tally +�
system shall be used.
All trucks to be employed on this Work will be measured to determine the volume of each truck. �
Each truck shall be clearly numbered, to the satisfaction of the Engineer, and there shall be no
duplication of numbers.
Duplicate tally tickets shall be prepared to accompany each truckload of material delivered on the �
project. All tickets received that do not contain the following information will not be processed for
payment:
1 Truck number
2 Quantity and type of material delivered in cubic yards +�
3 Drivers name, date and time of delivery
4 Location of delivery, by street and stationing on each street
5 Place for the Engineer to acknowledge receipt
6 Pay item number �'
7 Contract number and/or name
It will be the Contractor's responsibility to see that a ticket is given to the Engineer on the project for �
each truckload of material delivered. Pay quantities will be prepared on the basis of said tally
tickets.
Loads will be checked by the Engineer to verify quantity shown on ticket. �
Quantities by Ton. It will be the Contractor's responsibility to see that a certified weight ticket is
given to the Inspector on the project at the time of delivery of materials for each truckload �
delivered. Pay quantities will be prepared on the basis of said tally tickets, delivered to Inspector at
time of delivery of materials. Tickets not receipted by Inspector will not be honored for payment.
Each truck shall be clearly numbered to the satisfaction of the Engineer and there shall be no �
duplication of numbers.
�
52
�
++�► 09/08/2017
� Duplicate tickets shall be prepared to accompany each truckload of material delivered to the project.
All tickets received that do not contain the following information will not be processed for payment:
1. Truck number
2. Truck tare weight(stamped at source)
�► 3. Gross truckload weight in tons (stamped at source)
4. Net load weight (stamped at source)
5. Driver's name, date, and time of delivery
6. Location for delivery by street and stationing on each street
'""' 7. Place for the Engineer to acknowledge receipt
8. Pay item number
9. Contract number and/or name
..
1-09.3 Scope of Payment
Section 1-09.3 is supplemented by adding the following:
�******�
� The bid items listed in Section 1-09.14 will be the only items for which compensation will be made
for the Work described in each section of the Standard Specifications when the Contractor performs
the specified Work. Should a bid item be listed in a "Payment" clause but not in the Proposal Form,
and Work for that item is performed by the Contractor and the Work is not stated as included in or
"�" incidental to a pay item in the Contract and is not Work that would be required to complete the
intent of the Contract per Section 1-04.1,then payment for that Work will be made as for Extra Work
pursuant to a Change Order.
� The words "Bid Item;' "Contract Item;' and "Pay Item;' and similar terms used throughout the
Contract Documents are synonymous.
� If the "payment" clause in the Specifications relating to any unit bid item price in the Proposal Form
requires that said unit bid item price cover and be considered compensation for certain Work or
material essential to the item,then the Work or material will not be measured or paid for under any
�
other unit bid item which may appear elsewhere in the Proposal Form or Specifications.
Pluralized unit bid items appearing in these Specifications are changed to singular form.
,,� Payment for bid items listed or referenced in the "Payment" clause of any particular section of the
Specifications shall be considered as including all of the Work required, specified, or described in
that particular section. Payment items will generally be listed generically in the Specifications, and
specifically in the bid form. When items are to be "furnished" under one payment item and
� "installed" under another payment item, such items shall be furnished FOB project site, or, if
specified in the Special Provisions, delivered to a designated site. Materials to be "furnished," or
"furnished and installed" under these conditions, shall be the responsibility of the Contractor with
regard to storage until such items are incorporated into the Work or, if such items are not to be
i1" incorporated into the Work, delivered to the applicable Contracting Agency storage site when
provided for in the Specifications. Payment for material "furnished;' but not yet incorporated into
the Work, may be made on monthly estimates to the extent allowed.
�.
1-09.6 Force Account
Section 1-09.6 is supplemented as follows:
�******�
� Owner has estimated and included in the proposal, dollar amounts for all items to be paid per force
account, only to provide a common proposal for Bidders. All such dollar amounts are to become a
part of the Contractor's total bid. However,the Owner does not warrant expressly or by implication
� that the actual amount of Work will correspond with those estimates. Payment will be made on the
basis of the amount of Work actually authorized by the Engineer.
,,,,,, 1-09.7 Mobilization
Section 1-09.7 is supplemented as follows:
�******�
�
53
�nr
o9iosi2o�� �
Mobilization shall also include, but not be limited to, the following items: the movement of �
Contractor's personnel,equipment, supplies, and incidentals to the project site;the establishment of
an office, buildings, and other facilities necessary for Work on the project; providing sanitary
facilities for the Contractor's personnel; and obtaining permits or licenses required to complete the
project not furnished by the Owner. ayE
This item shall also include providing the Engineer and the Inspectors with access to telephone,
facsimile machine, and copy machine during all hours the Contractor is working on the jobsite; and a +
table and chair for their use when needed. '�
Payment will be made for the following bid item(s):
"Mobilization & Demobilization;' Lump Sum. �
1-09.9 Payments
Delete the third paragraph and replace it with the following:
�******� �
Progress payments for completed Work and material on hand will be based upon progress estimates
prepared by the Engineer. A progress estimate cutoff date will be established at the
preconstruction meeting. +�
The initial progress estimate will be made not later than 30 days after the Contractor commences
the Work, and successive progress estimates will be made every month thereafter until the �ii
Completion Date. Progress estimates made during progress of the Work are tentative, and made
only for the purpose of determining progress payment. The progress estimates are subject to
change at any time prior to the calculation of the final payment. �,
The value of the progress estimate will be the sum of the following:
�
1. Unit Price Items in the Bid Form — the approximate quantity of acceptable units of Work
completed multiplied by the unit price.
2. Lump Sum Items in the Bid Form — the estimated percentage complete multiplied by the Bid �
Forms amount for each lump sum item,or per the schedule of values for that item.
3. Materials on Hand — 100 percent of invoiced cost of material delivered to job site or other
storage area approved by the Engineer. �
4. Change Orders — entitlement for approved extra cost or completed extra Work as determined
by the Engineer.
�
Progress payments will be made in accordance with the progress estimate less:
1. Retainage per Section 1-09.9(1); �
2. The amount of Progress Payments previously made; and
3. Funds withheld by the Contracting Agency for disbursement in accordance with the Contract
Documents.
ril
Progress payments for Work performed shall not be evidence of acceptable performance or an
admission by the Contracting Agency that any Work has been satisfactorily completed.
�i.
Payments will be made by check or electronic transfer, issued by the Contracting Agency's fiscal
officer, against the appropriate fund source for the project. Payments received on account of Work
performed by a subcontractor are subject to the provisions of RCW 39.04.250. �
w�i
54
�
+�++ 09/08/2017
,�„ Section 1-09.9 is supplemented as follows:
�******�
Applications for payment shall be itemized and supported to the extent required by the Engineer by
receipts or other vouchers showing payment for materials and labor, payments to subcontractors,
� and other such evidence of the Contractor's right to payment as the Engineer may direct, including
"red line" as-built drawings showing work installed by the contractor during the progress payment
period.
�"' The Contractor shall submit a progress report with each monthly request for a progress payment.
The progress report shall indicate the estimated percent complete for each activity listed on the
progress schedule (see Section 1-08.3) and a revised and updated schedule to reflect the most
;�„ current project completion date.
1-09.9(1) Retainage
Section 1-09.9(1) is supplemented as follows:
;�,. �******�
The retained amount shall be released as stated in the Standard Specifications if no claims have been
filed against such funds as provided by law, and if the Owner has no unsatisfied claims against the
Contractor. In the event claims are filed, the Owner shall withhold, until such claims are satisfied, a
`�" sum sufficient to satisfy all claims and to pay attorney's fees. In addition, the Owner shall withhold
such amount as is required to satisfy any claims by the Owner against the Contractor, until such
claims have been finally settled.
�
Neither the final payment nor any part of the retained percentage shall become due until the
Contractor, if requested, delivers to the Owner a complete release of all liens arising out of this
Contract, or receipts in full in lieu thereof, and, if required in either case, an affidavit that so far as
� the Contractor has knowledge or information, the release and receipts include all labor and
materials for which a lien could be filed: but the Contractor may, if any subcontractor refuses to
furnish a release or receipt in full, furnish a bond satisfactorily to the Engineer to indemnify the
Owner against the lien. If any lien remains unsatisfied after all payments are made, the Contractor
" shall reimburse to the Owner all monies that the latter may be compelled to pay in discharging such
lien, including all costs and reasonable engineer's and attorney's fees.
,,,;,, 1-09.9(2) Contracting Agency's Right to Withhold and Disburse Certain Amounts
Section 1-09.9(2) is a new section:
�******�
In addition to monies retained pursuant to RCW 60.28 and subject to RCW 39.04.250, RCW 39.12
� and RCW 39.76, the Contractor authorizes the Engineer to withhold progress payments due or
deduct an amount from any payment or payments due the Contractor which, in the Engineer's
opinion, may be necessary to cover the Contracting Agency's costs for or to remedy the following
wr
situations:
1. Damage to another contractor when there is evidence thereof and a claim has been
filed.
2. Where the Contractor has not paid fees or charges to public authorities of
� municipalities,which the Contractor is obligated to pay.
3. Utilizing material tested and inspected by the Engineer,for purposes not connected with
the Work(Section 1-05.6).
4. Landscape damage assessments per Section 1-07.16.
"` 5. For overtime Work performed by City personnel per Section 1-08.1(4).
6. Anticipated or actual failure of the Contractor to complete the Work on time:
a. Per Section 1-08.9 Liquidated Damages; or
„�, b. Lack of construction progress based upon the Engineer's review of the Contractor's
approved progress schedule, which indicates the Work will not be complete within
the contract time. When calculating an anticipated time overrun,the Engineer will
make allowances for weather delays, approved unavoidable delays, and suspensions
+� of the Work.The amount withheld under this subparagraph will be based upon the
liquidated damages amount per day set forth in Contract Documents multiplied by
the number of days the Contractor's approved progress schedule, in the opinion of
�rr
55
�w
o9iosizo�� �
the Engineer, indicates the Contract may exceed the Contract Time. �
7. Failure of the Contractor to perform any of the Contractor's other obligations under the
Contract, including but not limited to:
a. Failure of the Contractor to provide the Engineer with a field office when required by
the Contract Provisions. �
b. Failure of the Contractor to protect survey stakes, markers,etc., or to provide
adequate survey Work as required by Section 1-05.5.
c. Failure of the Contractor to correct defective or unauthorized Work(Section 1-05.8).
d. Failure of the Contractor to furnish a Manufacture's Certificate of Compliance in lieu '�'
of material testing and inspection as required by Section 1-06.3.
e. Failure to submit weekly payrolls, Intent to Pay Prevailing Wage forms, or correct
underpayment to employees of the Contractor or subcontractor of any tier as �
required by Section 1-07.9.
f. Failure of the Contractor to pay worker's benefits (Title 50 and Title 51 RCW) as
required by Section 1-07.10. �
g. Failure of the Contractor to submit and obtain approval of a progress schedule per
Section 1-08.3.
The Contractor authorizes the Engineer to act as agent for the Contractor disbursing such funds
as have been withheld pursuant to this Section to a party or parties who are entitled to �
payment. Disbursement of such funds, if the Engineer elects to do so will be made only after
giving the Contractor 15 calendar days prior written notice of the Contracting Agency's intent to
do so, and if prior to the expiration of the 15-calendar day period, ,�
1. No legal action has commenced to resolve the validity of the claims, and
2. The Contractor has not protested such disbursement.
�
A proper accounting of all funds disbursed on behalf of the Contractor in accordance with this
Section will be made. A payment made pursuant to this section shall be considered as payment
made under the terms and conditions of the Contract. The Contracting Agency shall not be �;
liable to the Contractor for such payment made in good faith.
1-09.9(3) Final Payment
Section 1-09.9(2) is a new section: �
�******�
Upon Acceptance of the Work by the Contracting Agency, the final amount to be paid the Contactor
will be calculated based upon a Final Progress Estimate made by the Engineer. Acceptance by the :
Contractor of the final payment shall be and shall operate as a release: �
1. To the Contracting Agency of all claims and all liabilities of the Contractor, other than claims
in stated amounts as may be specifically excepted in writing by the Contractor;
2. For all things done or furnished in connection with the Work; Ii�1
3. For every act and neglect by the Contracting Agency; and
4. For all other claims and liability relating to or arising out of the Work.
A payment (monthly, final, retainage, or otherwise) shall not release the Contractor or the '�
Contractor's Surety from any obligation required under the terms of the Contract Documents or the
Contract Bond; nor shall such payment constitute a waiver of the Contracting Agency's ability to
investigate and act upon findings of non-compliance with the WMBE requirements of the Contract; �
nor shall such payment preclude the Contracting Agency from recovering damages, setting penalties,
or obtaining such other remedies as may be permitted by law.
Before the Work will be accepted by the Contracting Agency,the Contractor shall submit an affidavit,
on the form provided by the Engineer, of amounts paid to certified disadvantaged (DB), minority �
(MBE) or women business enterprises (WBE) participating in the Work. Such affidavit shall certify
the amounts paid to the DB, MBE or WBE subcontractors regardless of tier.
On federally funded projects the Contractor may also be required to execute and furnish the ,�
Contracting Agency an affidavit certifying that the Contractor has not extended any loans, gratuity or
gift and money pursuant to Section 1-07.19 of these Specifications.
�
56
�
+� 09/08/2017
,;,,�, If the Contractor fails, refuses, or is unable to sign and return the Final Progress Estimate or any
other documents required for the final acceptance of the Contract, the Contracting Agency reserves
the right to establish a completion date and unilaterally accept the Contract. Unilateral acceptance
will occur only after the Contractor has been provided the opportunity, by written request from the
�� Engineer, to voluntarily submit such documents. If voluntary compliance is not achieved, formal
notification of the impending unilateral acceptance will be provided by certified letter from the
Engineer to the Contractor that will provide 30 calendar days for the Contractor to submit the
necessary documents.The 30-calendar day deadline shall begin on the date of the postmark of the
i"t" certified letter from the Engineer requesting the necessary documents. This reservation by the
Contracting Agency to unilaterally accept the Contract will apply to contracts that are completed in
accordance with Section 1-08.5 for contracts that are terminated in accordance with Section 1-
,,,,,, 08.10. Unilateral acceptance of the Contract by the Contracting Agency does not in any way relieve
the Contractor of the provisions under contract or of the responsibility to comply with all laws,
ordinances, and federal, state, and local regulations that affect the Contract. The date the
Contracting Agency unilaterally signs the Final Progress Estimate constitutes the final acceptance
�� date (Section 1-05.12).
�„ 1-09.11 Disputes and Claims
1-09.11(2) Claims
Paragraph 5 is revised as follows:
rwr �******�
Failure to submit with the Final Application for Payment such information and details as described in
this section for any claim shall operate as a waiver of the claims by the Contractor as provided in
�r►
Section 1-09.9.
1-09.11(3) Time Limitations and Jurisdiction
Paragraph 1, Sentence 1 is revised as follows:
+�.
�******�
...such claims or causes of action shall be brought in the Superior Court of the county where the
Work is performed.
.L 1-09.13 Claims and Resolutions
1-09.13(3) Claims$250,000 or Less
Delete this Section and replace it with the following:
..► �******�
The Contractor and the Contracting Agency mutually agree that those claims that total $250,000 or
less, submitted in accordance with Section 1-09.11 and not resolved by nonbonding ADR processes,
,�,,, shall be resolved through litigation, unless the parties mutually agree in writing to resolve the claim
through binding arbitration.
1-09.13(3)A Administration of Arbitration
�.� Revise the third paragraph to read:
�******�
The Contracting Agency and the Contractor mutually agree to be bound by the decision of the
arbitrator, and judgment upon the award rendered by the arbitrator may be entered in the Superior
'�` Court of the county in which the Contractin�A�encv's headquarters are located. The decision of the
arbitrator and the specific basis for the decision shall be in writing. The arbitrator shall use the
Contract as a basis for decisions.
.�t
1-09.13(3)B Procedures to Pursue Arbitration
Section 1-09.13(3)B is supplemented by adding:
�******�
�� The findings and decision of the board of arbitrators shall be final and binding on the parties, unless
the aggrieved party, within 10 days, challenges the findings and decision by serving and filing a
petition for review by the superior court of King County, Washington. The grounds for the petition
+�►
57
+rw
o9ioai2o�� �
for review are limited to showing that the findings and decision: �,
1. Are not responsive to the questions submitted;
2. Is contrary to the terms of the contract or any component thereof;
3. Is arbitrary and/or is not based upon the applicable facts and the law controlling the issues
submitted to arbitration. The board of arbitrators shall support its decision by setting forth in �irii
writing their findings and conclusions based on the evidence adduced at any such hearing.
The arbitration shall be conducted in accordance with the statutes of the State of Washington and '�
court decisions governing such procedure. �
The costs of such arbitration shall be borne equally by the City and the Contractor unless it is the
board's majority opinion that the Contractor's filing of the protest or action is capricious or without �
reasonable foundation. In the latter case, all costs shall be borne by the Contractor.
�t
�
�
�.
�
�
�
�
�
�
�
�
�
58
�
�e 09/08/2017
�,; 1-09.14 Payment Schedule
Measurement and Payment Schedule for Bid Items in This Project Proposal
Section 1-09.14 is a new section:
�******�
'"` GENERAL
1-09.14(1) Scope
�rr� Section 1-09.14(1) is a new section:
�******�
A. Payment for the various items of the bid sheets, as further specified herein, shall include all
�� compensation to be received by the Contractor for furnishing all tools, equipment, supplies,
and manufactured articles, and for all labor, operations, and incidentals appurtenant to the
items of Work being described, as necessary to complete the various items of the Work all in
�t, accordance with the requirements of the Contract Documents, including all appurtenances
thereto, and including all costs of compliance with the regulations of public agencies having
jurisdiction, including Safety and Health Administration of the U.S. Department of Labor
,�� (OSHA). No separate payment will be made for any item that is not specifically set forth in
the Bid Schedules, and all costs therefore shall be included in the prices named in the Bid
Schedules for the various appurtenant items of Work.
�� B. The Owner shall not pay for material quantities,which exceed the actual measured amount
used and approved by the Engineer.
�,�. C. It is the intention of these Specifications that the performance of all Work under the bid for
each item shall result in the complete construction, in an accepted operating condition, of
each item.
'""` Work and material not specifically listed in the proposal but required in the Plans,
Specifications, and general construction practice,shall be included in the bid price. No
separate payment will be made for these incidental items.
�.�
1-09.14(2) Bid Items
,r„�, Section 1-09.14(2) is a new section:
�******�
This section describes the bid items. Measurement and Payment, where described in a bid item,
"" shall supersede Measurement and Payment listed in other sections of the Special Provisions and
Standard Specifications.
Several bid items listed below are included in Schedules A, B, and C. In no case shall any bid item
""" that is installed be considered as part of more than one schedule.
• Schedule A: Work Associated with the Storm pipes, manholes, lateral connections,
cleanouts, outfall, sidewalk and curb and gutter restoration, required asphalt restoration.
'�' This Schedule falls under State Sales Tax Rule 171 (see section 1-07.2(2)) and state retail
sales taxes shall be included in bid items prices.
��.
• Schedule B: Work Associated with the Sewer pipes, manholes, side sewers, and required
asphalt restoration.This Schedule falls under State Sales Tax Rule 170 (see section 1-07.2(3))
and state retail sales taxes shall not be included in bid items prices. Rather, the Contractor
�
shall collect retail sales tax on the full contract amount.
rw.
59
rr►
o9ioaizo» �
• Schedule C: Work Associated with the new Water lines, including pipeline,fittings, concrete �
blocking, utility relocations, sidewalk and curb and gutter restoration for the water main
work, and required asphalt restoration. This Schedule falls under State Sales Tax Rule 170
(see section 1-07.2(3)) and state retail sales taxes shall not be included in bid items prices. �
Rather,the Contractor shall collect retail sales tax on the full contract amount.
The following subsection provides the measurement and payment information of the Bid Items �,
common to two or more schedules.
1-09.14(2JA Mobilization&Demobilization(Bid Item A-1,8-1 and GI)-Lump Sum
il�
Measurement for mobilization &demobilization will be lump sum. The lump sum price shown will
cover the complete cost of furnishing and installing, complete and in-place all Work and materials
necessary to move and organize equipment and personnel onto the job site, provide and maintain �
all necessary support facilities and utilities,obtain all necessary permits and licenses, prepare the
site for construction operations, and maintain the site and surrounding areas during construction,
provide protection of existing utilities, provide component and system testing, and move all �
personnel and equipment off the site after contract completion.
The Contractor shall prepare a Mobilization Plan showing the proposed location for storage of all �
equipment and material proposed to be located at the site. Storage shall not interfere with use of
the City ROW and commercial and residential access.
i�,
For any proposed storage on private property outside the easement or work area,the Contractor
shall obtain a Temporary Use Permit for storage areas on private property. The Contractor shall be
responsible for all fees, applications, and work needed to obtain the permit. The Contractor shall �,
allow 3 to 4 weeks to obtain the Temporary Use Permit from the City.
i�
The Contractor shall prepare a Work Plan that shall include the following:
A. Proposed Construction Sequence and Schedule for all major items of work. �
B. Mobilization Plan showing the proposed location for storage of all equipment and
materials.
�
C. Temporary Erosion and Sediment Control Plan for all stages of the project
D. Traffic Control Plan, including provisions for cleaning and sweeping of any impacted �
roadways.
E. Trench Excavation Safety Systems plan/provisions. �
F. Identify Disposal Sites for various waste materials and provide copies of the site's
permits, licenses, and approvals. i�
G. Pedestrian Handling Plan.
�
The Work Plan shall be submitted to the City for review and approval within 10 days of the contract
award.
�
60
�
+wr 09/08/2017
�i
Payment for mobilization will be made at the lump sum amount bid (NOT to exceed 80%of bid price
prior to completion of construction) based on the percent of completed Work as defined in the 2016
.�� Standard Specifications for Road, Bridge, and Municipal Construction (WSDOT)for mobilization.
Payment for the remaining 20%will be made upon completion and final clean-up of the construction
site. Such payment will be complete compensation for all mobilization of employees, equipment
wr�. and materials, Mobilization Plan,Work Plan, preparation of all necessary submittals, bonds,
insurance, site improvements, permits, clean-up, Contaminated Soil and Groundwater Handling and
Management Plan, safety plan, and other plans/submittals not specifically covered in bid items, etc.
.,,r all in conformance with the Contract Documents. This bid item may not be more than ten percent
(10%) of the total amount of Bid for the schedule.
,.,,, 1-09.14(2J8 Trench Safety Systems(Bid Item A-2,8-2 and G2)—Lump Sum
Section 1-09.14(2)B is a new section:
(******�
,,, Measurement for trench safety systems will be per the lump sum bid price based on a percentage
defined as the amount of storm/sewer/water pipelines installed divided by the total length of
sewer/storm/water pipe shown to be installed in conformance with the Contract Documents.
�rr
Payment for trench excavation safety systems will be made at the measured percentage amount for
the pay period times the lump sum amount bid, said payment will be complete compensation for all
r,, equipment, labor, materials, hauling, planning, design, engineering, submittals,furnishing and
constructing and removal and disposal of such temporary sheeting, shoring, and bracing complete
as required under the provisions of any permits and in the requirements of OSHA and RCW Chapter
�, 49.17, etc., required to complete this item of Work in conformance with the Contract Documents.
The work includes, but not limited to, preparing and submitting a shoring plan stamped by a
� professional engineer registered in the State of Washington by the preconstruction conference.
1-09.14(2)C Construction Surveying,Staking,and As-Buili Drawings(Bid Item A-3,8-3,and C-3J—Lump Sum
�
Section 1-09.14(2)C is a new section:
�******�
Measurement for construction surveying, staking and as-built drawing information will be per the
�
lump sum bid price and based on the percentage of total Work complete at the time of
measurement.
Payment may be prorated over the construction period based on the amount of work completed for
'��` construction surveying, staking and as-built information.
Survey will be per Special Provision Section 1-05.4 and City of Renton Surveying Standards on Special
"'� Provision Section 1-11. The as-built survey will be per Special Provisions Section 1-11.The
contractor shall provide the City with a set of redline drawings with the as-built locations and
elevations of all new utilities and construction work.
�.
Payment will be complete compensation for all labor, materials, equipment, tools, all incidental
work needed to provide construction surveying and of the improvements (including providing a
"" Washington State licensed surveyor for said work), staking in advance of pipe laying, fittings and
structure installation, surveying the horizontal and vertical locations of all potholed existing utilities
�
61
r
o9iosi2o�� �!
within the work area, verification and recording of the elevations of existing roadway centerline, �,
crown, and edge of pavement to ensure that all roadways can be reconstructed to existing grade,
and preparation of cut-sheets. Said payment will be complete compensation for all labor, materials,
equipment, tools, all incidental work needed to provide as-built surveying, preparing "red line" as- �
built drawings for pay estimate submittal with fittings and dimensions of existing and proposed
facilities installed or encountered during the pay period, furnishing an electronic file with
construction drawings stamped and signed by a licensed land surveyor that contains the as-built �p
information and copies of field notes, and furnishing and resetting property corners when disturbed
by the contractor's activities. No more than 50% of the bid amount for this item shall be paid prior
to the review and acceptance of the as-constructed information by the Engineer. �,
1-09.14(2)D Temporary Traffic Control(Bid Item A-4,8-4 and C-4J—Lump Sum
Section 1-09.14(2)N is a new section: �
�******�
Measurement for temporary traffic control Work will be will per the lump sum bid price and shall be
based on the percentage of total Work complete, at the time of ineasurement in conformance with �
the Contract Documents.
Payment for temporary traffic control for Work will be made at the measured percentage amount for
the pay period times the lump sum bid amount. Payment will be complete compensation for �
preparing and submitting a traffic control plan and pedestrian handling plan as well as all labor,
tools, materials, equipment used in accordance with the approved Traffic Control Plan and
pedestrian handling plan that is not included in other bid items. The Lump Sum contract price shall �C
be full pay for all costs for performing the work described in Section 1-10.3(3), Section 1-10.3(4), and
in the Traffic Control Information. Payment shall include but not be limited to providing for public
convenience and safety, flaggers, traffic control supervisor, construction signs, detours, barricades, �
sequential arrow boards, a minimum of two Portable Changeable Message Signs, traffic control
devices, truck-mounted attenuator, temporary striping, cleanup, etc. required to complete this item
of Work in conformance with the Contract Documents and the Manual on Uniform Traffic Control �
Devices (MUTCD) and as directed by the Engineer and by the City's Transportation Department.
Also, included in the contract price is the cost to furnish traffic control services and equipment for
construction surveying, staking, and as-built plans. �
All adjustments to the Traffic Control Plan are considered incidental, and no additional payment will
be made for adjustments.
r�rY
1-09.14(2)E Stormwater Pollution Prevention and TESC Plan and Implementation(Bid Item A-5, 8-5 and G
5)—Lump Sum
Section 1-09.14(2)H is a new section: �p,
�******�
Measurement for Stormwater Pollution Prevention and TESC Plan and Implementation will be based .:
on the lump sum bid price in conformance with the Contract Documents. �
Temporary Erosion Control measures include inlet protection (catch basin inserts), cleaning catch �
basins, filter fabric fencing, construction entrance, straw mulch, plastic sheeting, etc. at a minimum.
Other erosion control measures may be necessary depending on weather and site conditions,
including but not limited to, hay bales, placement of plastic sheets over exposed soil and stockpiles, �
mulching, netting, etc., and any other activities needed to control erosion from the project.
�
62 -
�
�� 09/08/2017
�r The Contractor shall update the DRAFT Storm Water Pollution Prevention Plan, develop a "red lined"
Temporary Erosion and Sediment Control plan and submit it to the City for review and approval. The
plan shall be based on the King County Surface Water Design Manual, as adopted by the City of
.� Renton, and proper construction practices. After the erosion control system is installed the
Contractor shall make any field adjustments necessary to reduce or eliminate any erosion and
discharge of sediment-laden water. All adjustments are considered incidental and no additional
� payment will be made for adjustments.
The lump sum price for "Stormwater Pollution Prevention (and TESC) Plan and Implementation"
shall be full pay for all labor, material, tools, equipment, and other incidental costs required to
'�" prepare the Stormwater Pollution Prevention Plan and Temporary Erosion and Sediment Control
Plan as describe in Section 1-07.15 and implement the temporary erosion and sediment control
BMP's including but not limited to installation, monitoring, and maintenance of sediment ponds,
"�` straw wattles, filter fabric fencing, pumping of construction water, coffer dams, temporary storm
drain diversions including temporary piping, check dams, cover measures including plastic covering,
street sweeping, collection and disposal of wastewater from asphalt and concrete cutting operations
''�" and other work necessary to meet the contract and permit requirements, not otherwise shown as a
separate payment item. Payment shall also include the Contractor's use of Baker Tanks, as needed
during construction and associated labor, tools, equipment and incidental costs including Baker Tank
"""'' mobilization, set up, maintenance, and relocation as work progresses, and incidentals required to
use Baker Tanks, when needed to meet regulatory discharge requirements.
Work shall include coordination, permitting,fees, and treatment required by King County as required
�` in 1-07.15 if discharging to the sanitary sewer.
1-09.14(2JF Landscape Restoration(Bid Item A-6, 8-6 and C-6)—Lump Sum
�"` Section 1-09.14(2)F is a new section:
�******�
� Measurement for landscape restoration work will be based on the percentage of total Work
complete, at the time of ineasurement in conformance with the Contract Documents.
�
Payment for landscape restoration will be made at the unit price bid per lump sum, which
payment will be complete compensation for all labor, equipment, materials, hauling,
excavation, sod, grass seed, topsoil, landscape bark, gravel, concrete, planting, preparation,
compaction, watering, restoration, etc. required to restore landscaped, grass, and planted
'� areas to an equal or better condition in conformance with the Contract Documents. It shall
include but not be limited to the following:
'�` • Hauling and disposing unsuitable, surplus and/or waste materials
• Replacing and restoring any landscaping, rockeries, walls, tree removal and replacement,
'�" trees, bark, and other improvements disturbed by construction activities, as directed by
the Engineer
""" • Preparation, placement, and maintenance of 8" depth topsoil and lawn sod per City
specifications as supplemented in the Special Provisions. All lawn areas shall be
replaced with topsoil and sod. Bare areas shall be replaced at a minimum with mulch and
"'� seed.
� Site cleanup of all areas disturbed by contractor's activities to match the conditions as
�
63
rr
o9ioaizo�� �ft
closely as existed prior to contractor's beginning work or as directed by the Engineer. �
1-09.14(2JG Select Imported Trench Backfill (Bid Item A-7, 8-7 and C-7)—Ton
Section 1-09.14(2)G is a new section: �
�******)
Measurement for select imported trench backfill will be measured in tons based on the weight of
material installed into the Work in conformance with the Contract Documents. Certified weight `�
tickets will accompany each load, a copy of tickets will be given to the Engineer daily. Wasted
materials will not be included in the measurement or payment. Only materials placed within the pay
limits shown will be considered for payment. Material placed outside of the pay limits shown on the �
Plans or as approved by the Engineer will be deducted from the certified tickets.
Payment for select imported backfill will be made at the amount bid per ton, which payment will be
complete compensation for all labor, materials, tools, equipment, incidentals necessary to furnish �
and install select import backfill, hauling, placement, compaction, removal, haul and disposal of
unsuitable excavated materials, waste and surplus materials, etc., required to complete this item of
Work in conformance with the Contract Documents. '�
1-09.14(2JH Hot Mix Asphalt Patch Including CSTC (Bid Item A-8, 8-8 and G8J—Square Yard
Section 1-09.14(2)H is a new section: �
�******�
Measurement for Hot Mix Asphalt Patch Including CSTC shall be measured in Square Yards. �
Pavement repair measurement width shall be as defined by the limit of trench patch payment
shown in the Contract Documents, unless otherwise approved by the Engineer. Wasted materials
will not be included in the measurement or payment. Only materials placed within the pay limits �
shown will be considered for payment. Material placed outside of the pay limits shown on the plans
or as approved by the Engineer will be deducted from the certified tickets.
Payment for Hot Mix Asphalt Patch including CSTC will be made at the amount bid per Square Yard, �'
which payment will be complete compensation for all labor, materials, tools, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be �
limited to the following:
•Sawcutting, removal and disposal of existing pavement
•Placing and compacting crushed surfacing top course for utility trenches �
•Furnishing, placing, and compacting hot mix asphalt materials for pavement repair
•Sealing all cold joints �
•Tack coat
•loint seal
•Ashpalt Sidewalk Transitions �
•Hauling
•Aggregate =�
•Sweeping �
•Adjustment of utilities to grade
•Furnishing and preparing subgrade
•Cleanup �
•All other incidentals necessary for a complete paving and restoring the roadway grade to
existing elevations.
�-
64
�
��+ o9ioaizo��
;�rr 1-09.14(2)1 Remove and Replace Concrete Sidewalk and Driveway(Bid Item A-9, 8-9 and C-9J—Square Yard
Section 1-09.14(2)I is a new section:
�******�
""� Measurement for "Remove and Replace Concrete Sidewalk and Driveway" will be based on square
yard of concrete driveway,to match existing, restored to a saw-line line cut in conformance with the
contract documents.
�
Payment for "Remove and Replace Concrete Sidewalk and Driveway" will be made at the unit price
bid per square yard, which payment will be complete compensation for all labor, equipment,
""�' materials, tools and incidentals to remove and replace cement concrete driveway and sidewalk in
conformance with the contract documents and plans, and shall include but not be limited to the
following:
wt
• Sawcutting existing driveway, curb, sidewalk, and existing pavement
• Removal and disposal of surplus, unsuitable and/or waste materials
""` • Placing and compacting crushed surfacing top course for subgrade
• Furnishing and installing formwork
• Furnishing, placing, compacting, and finishing concrete for new driveway and/or sidewalk
�
surface.
Gravel driveway and gravel parking areas, if existing, shall be restored under landscape restoration.
�
1-09.14(2JJ Remove and Replace Concrete Curb and Gutter(Bid Item A-10,8-10 and GIOJ—Linear Foot
Section 1-09.14(2)J is a new section:
� �******�
Measurement for "Remove and Replace Concrete Curb and Gutter" shall be per linear foot of curb
�.
repair required for installation of utilities in conformance with the Contract Documents.
Payment for "Remove and Replace Concrete Curb and Gutter" will be made at the amount bid per
linear foot, which payment will be complete compensation for all labor, materials, tools, equipment
'�' required to complete the work specified in the contract documents and plans, and shall include but
not be limited to the following:
'"' • Sawcutting, removal and disposal of existing curb and gutter
• Removal and disposal of surplus, unsuitable and/or waste materials
• Placing and compacting crushed surfacing top course for subgrade
�` � Furnishing and installing temporary formwork
• Furnishing and placing concrete and joint filler for new curb and gutter
�` 1-09.14(2JK Replace Pavement Markings(Bid Item A-11,8-11 and C-11)—Lump Sum
Section 1-09.14(2)K is a new section:
�******�
�
Measurement for restore pavement markings will be per lump sum in conformance with the
Contract Documents.
� Payment will be made at contract lump sum and constitute full compensation for all material,
equipment,tools, labor and all else necessary for and incidental to re-establish existing pavement
markings in accordance with the plans and specifications.
�.
65
,wr
o9iosizo�� �
�
1-09.14(2JL Removal and Replacement of Unsuitable Foundation Material(Bid Item A-12,8-12 and C-12J—
TON
Section 1-09.14(2)L is a new section: �,
�******�
Measurement for removal and replacement of unsuitable foundation material will be measured in
Tons based on the placed weight of material installed in conformance with the Contract Documents. �r
Placement of foundation material will be measured only for the area(s) authorized by the Engineer.
Certified tickets will accompany each load, a copy of tickets will be given to the Engineer daily.
Wasted materials will not be included in the measurement or payment. �
Payment for removal and replacement of unsuitable foundation material will be made at the unit bid
price, which will be complete compensation for all labor, materials, tools, equipment, excavation, �
foundation materials, haul, placement, water, compaction, removal haul and disposal of waste
material, etc., required to complete this item of Work in conformance with the Contract Documents.
�
Payment for this item will be only for the removal and replacement of unsuitable material requested
by the City.
�it
1-09.14(2)M CCN Inspection(Bid Item A-13 and 8-13)—Linear Foot
Section 1-09.14(2)M is a new section:
�******� +�i
Measurement for CCTV inspection will be per linear foot of storm and sanitary sewer pipe inspected
in conformance with section 7-08.3(5) and the Contract Documents. �
Payment for CCTV Inspection will be made at the amount bid per linear foot, which payment will be
complete compensation for all labor, materials, equipment required to complete the work specified
in the contract documents and plans, and shall include but not be limited to the following: �
• Bypass sewer pumping(if needed),
• CCTV inspection of all new open-cut installed storm and sanitary sewers, �
• Delivery of the CCN inspections entirely in a PACP compatible format data base on an External
HDD to the Engineer.
�
. Costs for additional Television Inspection required to verify corrections or replacement of pipe, or
done solely for the Contractor's convenience, shall be at the Contractor's sole expense.
�
1-09.14(2JN Site Specific Utility Potholing(Bid Item A-14 and C-13J—Each
Section 1-09.14(2)N is a new section:
�******� �ft�
Measurement for performing Site Specific Potholing will be per each for each location shown on the
engineering drawings, or as directed by the Engineer. Work shall be performed in conformance with
the Contract Documents(see Section 1-07.17(1)for Site Specific Potholing). �
Payment for Site Specific Potholing will be made at the unit price bid per each, which payment will
be complete compensation for all labor, tools, equipment, and materials required to complete the �;
work in conformance with the contract Documents including but not limited to pavement and
concrete cutting, excavation, dewatering, potholing for utility location, removal, hauling and
�
66
�
� 09/08/2017
� disposal of all pavement, waste and excess materials, shoring, relocating or coordinating relocation
of the unknown utility, placement of backfill (native) material, compaction, water, grading,
temporary patch, and cleaning. Payment also includes all temporary traffic control operations, utility
�++ one-call and, coordination with utility owner, and temporary restoration work associated with
potholing.
�r If the native material is unsuitable to use to refill the pothole, imported backfill may be used.
Imported backfill will be paid under a separate bid item. Permanent pavement patch will be paid
under a separate bid item.
�
Prior to beginning construction of the new underground utility, the Contractor shall pothole the
existing underground utilities at the locations required by the Plans, or as identified by the Engineer.
rr, The Contractor shall perform potholing a minimum of ten (10) working days prior to construction at
the pothole location to allow for potential revisions. The City shall have 10 working days after
receiving the written results to make any design revisions to the plans, if needed. The Engineer may
rrr revise the design as needed if there is a conflict with existing utilities.
The Contractor shall not have cause for claim of downtime or any other additional costs associated
�r with "waiting" if the City provides design revisions (related to the information supplied per this
section)within 10 working days after the Contractor provides the written potholing results.
,y„� 1-09.14(2J0 Replace Survey Monument(Bid Item A-15 and C-14J—Each
Section 1-09.14(2)O is a new section:
�******�
.� Replace Survey Monument shall be per Special Provisions Section 1-05.4 and the City of Renton
Surveying Standards in Special Provisions Section 1-11.The surveyor shall comply with WAC 332-120
Survey Monuments — Removal or Destruction. Contractor shall contact Amanda Askren (City of
�rr Renton) at 425-430-7369 prior to performing work.
The work includes, but is not limited to:
'"�`� A. Locating and surveying all existing monuments, and providing the City with a copy of
the survey results.
�,, B. Providing the City with a copy of Application to Remove a Monument submitted to the
State DNR for each monument.
C. Resetting the monuments in the original positions, or setting witness monuments if
"""'' needed. All new monuments, discs, materials, and the work needed to set them are
included.
� D. Providing the City with a copy of the Completion Report submitted to the State DNR
for each monument.
E. Submitting a City Monument Card to the City showing the new monument and
�° monument ties. Existing monument ties will be used whenever possible. New ties
shall be set where needed. New monuments and monument cards are subject to City
review and approval. Any corrections or resurveying needed shall be incidental.
�
F. All work shall be located per the City of Renton Survey Control Network. Coordinates
shall be given for the new and existing monument.
�
67
rr
„�
o9iosi2o�� �'
�
Measurement for Replace Survey Monument shall be per each survey monument replaced,
including each witness monument placed (if needed). This bid item shall also be used for new
survey monument where required on the plans. �
Payment will be complete compensation for all labor, materials, equipment, travel, surveying,
documentation, permits, and replacement of each survey monument as shown on the plans �i
required to complete this item of work in conformance with the Contract Documents.
Up to 50 percent of the unit bid price for each monument will be paid after each existing monument �
is surveyed, and the City receives a copy of the Application to Remove a Monument submitted to
the DNR.
�
The remaining 50 percent of the unit bid price for each monument will be paid after each new
monument is placed, a copy of the Completion Report and a new Monument Card is submitted to
the City, and the City review and acceptance of the new monument and Monument Card. r�i
The following subsection provides the measurement and payment information of the Bid Items
specific to Schedule A—Storm Water. �
1-09.14(2)AA Stormwater Minor Changes(Bid Item A-16)—Estimated
Section 1-09.14(2)AA is a new section:
�******�
�
For the purpose of providing a common proposal for all bidders, the Contracting Agency has entered
an amount for "Stormwater Minor Change” in the Proposal to become a part of the total bid by the `'
Contractor. At the discretion of the Contracting Agency, all or part of this estimated amount may be �
used in lieu of the more formal procedure as outlined in Section 1-04.4 of the Standard
Specifications. The unit contract price for Minor Changes is given in the Schedule of Prices and shall `
not be changed by the bidder. �
All work and payment under this item will be authorized in writing by the City Project Manager or
Supervisor. Payment will be determined in accordance with Section 1-09.4 of the Standard �
Specifications.
Payment for this item will be only for the changes and amounts approved by the City. °
If no changes are authorized under this bid item final payment for this item will be $0 (zero). r�
1-09.14(2JA8 Resolution of Utility Conflicts with Stormwater(Bid Item A-17)—Force Account
Section 1-09.14(2)AB is a new section: �
�******�
Payment will be made at the discretion of the Engineer, for the following bid item(s) in accordance �
with Section 1-09.6 of the Standard Specifications and these Special Provisions when included in the
ProposaL•
"Resolution of Utility Conflicts with Stormwater," per Force Account. �
In no way shall the work described under Resolution of Utility Conflicts relieve Contractor of any of
the responsibilities described in Section 1-07.17 of the Standard Specifications and Special �
Provisions, and elsewhere in the Contract Documents.
�
68
�
� 09/08/2017
� Resolution of utility conflicts is included as a bid item for use in resolving any new identified utility
conflicts not otherwise shown on the Contract Drawing or Specifications that are identified during
the course of construction. Resolution of conflicts with gas services, water services, and sewer
.. services shall be incidental to other pay items.
To provide a common basis for all bidders, the Contracting Agency has entered an amount for the
� item "Resolution of Utility Conflicts with Stormwater" in the Proposal to become a part of the total
bid by the Contractor. Payment for this item will be only for the changes and amounts approved by
the City. If no changes are authorized under this bid item, final payment for this item will be $0
� (zero).
1-09.14(2)AC Construction Geotextile For Separation Bid Item A-IS)—Square Yard
�„ Section 1-09.14(2)AC is a new section:
�******�
Measurement for construction geotextile for separation will be per square yard installed as
"711' measured by the length installed by the standard width of the trench/sections as shown on the
Plans. All use of geotextile shall be pre-approved by the Engineer.
Payment will be made at contract unit price and will constitute full compensation for all material,
'� equipment, tools, labor, and all necessary for and incidental to the installation of geotextile in
accordance with the Contract Documents and as directed by the Engineer. The geotextile bid item is
�
exempt from Section 1-04.6 and no price adjustment will be made for variation in actual quantity
used.
The Construction Geotextile for Separation bid item is exempt from Section 1-04.6 and no price
� adjustment will be made for variation in actual quantity used.
1-09.14(2JAD Storm Drain,6-inch Diameter(CPEP](Bid 1[em A-19J—Linear Foot
�
Section 1-09.14(2)AD is a new section:
(******�
Measurement for Storm Drain Pipe, 6-in Diameter will be based on linear foot measured horizontally
,y,,, over the centerline of the installed pipe from the center of structures in conformance with the
Contract Documents.
Payment for furnishing and installing Storm Drain Pipe, 6-in Diameter [CPEP] will be made at the
� amount bid per linear foot,which payment will be complete compensation for:
• All labor, materials, equipment and hauling
� Locating all existing utilities and potholing in advance to determine their horizontal and vertical
�' location, protecting and providing temporary support of existing utilities
• Pavement cutting(sawcutting), pavement removal and excavation
• Dewatering,temporary bypass pumping and control of water
� • Removal and disposal of waste material in the excavation necessary to construct the
improvements including but not limited to: existing pipes; catch basins; manholes; structures;
�
and abandoned utilities
• Pipe of the size and material type required, gaskets,fittings and adaptors
• Installation, laying and jointing pipe and fittings
�
• Furnishing and placing pipe zone bedding material
• Furnishing, placement and compaction of imported trench backfill
.r
69
�rr
o9iosi2o�� �
• Appurtenances, ethafoam pads, water, grading, cleaning, and testing, etc. required to complete �rii
the work in accordance with the Contract Documents
• Removal of pipe and catch basins beyond the excavation where shown on the Drawings or where
directed by the Engineer as well as plugging existing pipes to be abandoned and plugging �
existing pipes where sections have been removed for the storm installation, and providing end
caps were shown on the plans. These items shall not be limited to those mentioned on the
Plans or specified herein. �i
• Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching.
�
Contractor is advised that year-round groundwater seeps entering the drainage system must be
controlled and bypassed and shall be paid for as a part of this bid item.
�iii
Select Imported Trench Backfill above the pipe zone bedding is included in other bid items.
�
1-09.14(2)AE Storm Drain,8-inch Diameter(CPEP](Bid Item A-20)—Linear Foot
Section 1-09.14(2)AE is a new section:
�******�
�
Measurement for Storm Drain Pipe, 8-in Diameter [CPEP] will be based on linear foot measured
horizontally over the centerline of the installed pipe from the center of structures in conformance
with the Contract Documents. �
Payment for furnishing and installing Storm Drain Pipe, 8-in Diameter will be made at the amount
bid per linear foot,which payment will be complete compensation for: '
�
• All labor, materials, equipment and hauling
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, protecting and providing temporary support of existing utilities �
• Pavement cutting(sawcutting), pavement removal and excavation
• Dewatering,temporary bypass pumping and control of water
• Removal and disposal of waste material in the excavation necessary to construct the �
improvements including but not limited to: existing pipes; catch basins; manholes; structures;
and abandoned utilities
• Pipe of the size and material type required,gaskets,fittings and adaptors �',
• Installation, laying and jointing pipe and fittings
• Furnishing and placing pipe zone bedding material
• Furnishing, placement and compaction of imported trench backfill a�
• Appurtenances, ethafoam pads, water, grading, cleaning, and testing, etc. required to complete
the work in accordance with the Contract Documents
• Removal of pipe and catch basins beyond the excavation where shown on the Drawings or where +�
directed by the Engineer as well as plugging existing pipes to be abandoned and plugging
existing pipes where sections have been removed for the storm installation, and providing end `
caps were shown on the plans. These items shall not be limited to those mentioned on the �
Plans or specified herein.
• Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching. �
�
70
�
+� 09/08/2017
� Contractor is advised that year-round groundwater seeps entering the drainage system must be
controlled and bypassed and shall be paid for as a part of this bid item.
� Select Imported Trench Backfill above the pipe zone bedding is included in other bid items.
1-09.14(2)AF Storm Drain,8-inch Diameter(DI](Bid Item A-21)—Linear Foot
� Section 1-09.14(2)AF is a new section:
�******�
� Measurement for Storm Drain Pipe, 8-in Diameter [DI] will be based on linear foot measured
horizontally over the centerline of the installed pipe from the center of structures in conformance
with the Contract Documents.
�r
Payment for furnishing and installing Storm Drain Pipe, 8-in Diameter will be made at the amount
bid per linear foot, which payment will be complete compensation for:
� • All labor, materials, equipment and hauling
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, protecting and providing temporary support of existing utilities
"� • Pavement cutting(sawcutting), pavement removal and excavation
• Dewatering,temporary bypass pumping and control of water
�
• Removal and disposal of waste material in the excavation necessary to construct the
improvements including but not limited to: existing pipes; catch basins; manholes; structures;
and abandoned utilities
�
• Pipe of the size and material type required, gaskets,fittings and adaptors
• Installation, laying and jointing pipe and fittings
• Furnishing and placing pipe zone bedding material
�rr
• Furnishing, placement and compaction of imported trench backfill
• Appurtenances, ethafoam pads, water, grading, cleaning, and testing, etc. required to complete
the work in accordance with the Contract Documents
;r,i„ • Removal of pipe and catch basins beyond the excavation where shown on the Drawings or where
directed by the Engineer as well as plugging existing pipes to be abandoned and plugging
existing pipes where sections have been removed for the storm installation, and providing end
,�,,, caps were shown on the plans. These items shall not be limited to those mentioned on the
Plans or specified herein.
• Replacing, protecting and/or maintaining existing utilities
�, � Furnishing and placing temporary pavement patching.
Contractor is advised that year-round groundwater seeps entering the drainage system must be
'�'i' controlled and bypassed and shall be paid for as a part of this bid item.
� Select Imported Trench Backfill above the pipe zone bedding is included in other bid items.
1-09.14(2JAG Storm Drain,12-inch Diameter(PPP](Bid Item A-22)—Linear Foot
�ir
Section 1-09.14(2)AG is a new section:
�******�
�rrc
71
�
09/08/2017 �
Measurement for Storm Drain Pipe, 12-in Diameter [PPP] will be based on linear foot measured �p
horizontally over the centerline of the installed pipe from the center of structures in conformance
with the Contract Documents.
Payment for furnishing and installing Storm Drain Pipe, 12-in Diameter will be made at the amount �
bid per linear foot,which payment will be complete compensation for:
• All labor, materials, equipment and hauling >>
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �
location, protecting and providing temporary support of existing utilities
• Pavement cutting(sawcutting), pavement removal and excavation �
• Dewatering,temporary bypass pumping and control of water
• Removal and disposal of waste material in the excavation necessary to construct the
improvements including but not limited to: existing pipes; catch basins; manholes; structures; �
and abandoned utilities
• Pipe of the size and material type required,gaskets,fittings and adaptors
• Installation, laying and jointing pipe and fittings �;
• Furnishing and placing pipe zone bedding material
• Furnishing, placement and compaction of imported trench backfill
• Appurtenances, ethafoam pads, water, grading, cleaning, and testing, etc. required to complete ;,,�
the work in accordance with the Contract Documents
• Removal of pipe and catch basins beyond the excavation where shown on the Drawings or where
directed by the Engineer as well as plugging existing pipes to be abandoned and plugging „�;
existing pipes where sections have been removed for the storm installation, and providing end
caps were shown on the plans. These items shall not be limited to those mentioned on the
Plans or specified herein. ;,,�
• Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching.
�
Contractor is advised that year-round groundwater seeps enter the drainage system must be
controlled and bypassed and shall be paid for as a part of this bid item.
�ii
Select Imported Trench Backfill above the pipe zone bedding is included in other bid items.
1-09.14(2AH Storm Drain,12-inch Diameter�DI](Bid Item A-23J—Linear Foot +�
Section 1-09.14(2)AH is a new section:
�******�
Measurement for Storm Drain Pipe, 12-in Diameter [DI] will be based on linear foot measured '�
horizontally over the centerline of the installed pipe from the center of structures in conformance
with the Contract Documents.
�
Payment for furnishing and installing Storm Drain Pipe, 12-in Diameter will be made at the amount
bid per linear foot,which payment will be complete compensation for:
• All labor, materials, equipment and hauling �;
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, protecting and providing temporary support of existing utilities
• Pavement cutting(sawcutting), pavement removal and excavation ,�
• Dewatering,temporary bypass pumping and control of water
w�t
72
�
+� 09/08/2017
�w • Removal and disposal of waste material in the excavation necessary to construct the
improvements including but not limited to: existing pipes; catch basins; manholes; structures;
and abandoned utilities
+� • Pipe of the size and material type required, gaskets,fittings and adaptors
• Installation, laying and jointing pipe and fittings
� Furnishing and placing pipe zone bedding material
� • Furnishing, placement and compaction of imported trench backfill
• Appurtenances, ethafoam pads, water, grading, cleaning, and testing, etc. required to complete
the work in accordance with the Contract Documents
""" • Removal of pipe and catch basins beyond the excavation where shown on the Drawings or where
directed by the Engineer as well as plugging existing pipes to be abandoned and plugging
existing pipes where sections have been removed for the storm installation, and providing end
""�" caps were shown on the plans. These items shall not be limited to those mentioned on the
Plans or specified herein.
• Replacing, protecting and/or maintaining existing utilities
'�` � Furnishing and placing temporary pavement patching.
�
Contractor is advised that year-round groundwater seeps enter the drainage system must be
controlled and bypassed and shall be paid for as a part of this bid item.
Select Imported Trench Backfill above the pipe zone bedding is included in other bid items.
+�r
1-09.14(2)Al Trench Drain (Bid Item A-24)—Linear Foot
Section 1-09.14(2)AI is a new section:
�► �******�
Measurement for Trench Drain will be based on linear foot measured horizontally over the
centerline of the trench drain installed as measured from the end of the grates in conformance with
'�' the Contract Documents.
Payment for furnishing and installing Trench Drain will be made at the amount bid per linear foot,
�
which payment will be complete compensation for:
• All labor, materials, equipment and hauling
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
,� location, protecting and providing temporary support of existing utilities
• Pavement/concrete cutting (sawcutting), pavement removal and disposal, concrete curb and
gutter removal and disposal and excavation
,,,, • Dewatering,temporary bypass pumping and control of water
• Removal and disposal of waste material in the excavation necessary to construct the
improvements including but not limited to; existing pipes; structures; and abandoned utilities
�.r • Placing and compacting crushed surfacing top course bedding, trench drain and grate,
replacement concrete curb, connecting pipe at termination of trench drain, gaskets, fittings and
adaptors, installation, laying and jointing trench drain and fittings
r � Appurtenances, ethafoam pads
• Placement of backfill material, compaction, water and grading, submittals, cleaning, and testing,
etc. required to complete the work in accordance with the Contract Documents.
+� • Furnishing and placing temporary pavement patching
�
73
�rrr
o9iosi2o�� ,�
Select Imported Trench Backfill used as backfill for the Trench Drain is included in other bid items. �
1-09.14(2JAJ Connect Existing Lateral to New Storm Pipe(Bid Item A-25J—Each
Section 1-09.14(2)AJ is a new section: '
�******�
�
Measurement for connect existing lateral to new storm pipe will be per each in conformance with
Contract Documents. �
Payment for connect existing lateral to new storm pipe will be made at the unit price per each,
which will be complete compensation for all labor, equipment, materials, excavation around and
protection of existing pipe, cleaning the existing pipe, pipe sleeve or other fittings required to �
connect to existing pipe, and removal and disposal of waste material.
Pipe material shall be under separate item.
�
1-09.14(2)AK Connect New Storm Pipe to Existing Catch Basin(Bid Item A-26J—Each
Section 1-09.14(2)AK is a new section:
�******) �i
Measurement for connect new storm pipe to existing catch basin will be per each in conformance
with Contract Documents. �
Payment for connect new storm pipe to existing catch basin will be made at the unit price per each,
which will be complete compensation for all labor, equipment, materials, excavation around and
protection of existing structure, core drilling, cleaning the existing catch basin and other materials �
required to connect to existing catch basin.
1-09.14(2JAL Storm Lateral Cleanout -6"or 8"Diameter(Bid Item A-27J—Each �
Section 1-09.14(2)AL is a new section:
�******�
Measurement for storm lateral cleanout — 6" or 8" diameter will be per each in conformance with +�
Contract Documents. City may require an 8" diameter cleanout for an existing 6" lateral.
Payment for storm lateral cleanout—6"or 8" diameter will be made at the unit price per each,which
will be complete compensation for all labor, equipment, materials, excavation around and protection ""�'
of existing pipe, bedding, pipe associated with the cleanout riser including wye connection to lateral,
pipe reducer fitting if transitioning from 6" to 8", or other fittings/couplings required to connect to
existing main pipe, removal and disposal of waste material, cast iron ring and cover, watertight plug, "'�
concrete pad, and furnishing and placing temporary pavement patching.
1-09.14(2)AM Catch Basin Type 1(Bid Item A-28J—Each �
Section 1-09.14(2)AM is a new section:
�******�
�
Measurement for furnishing and installing catch basin Type 1 will be per each for each catch basin
installed in conformance with the Contract Documents.
Payment for furnishing and installing catch basin Type 1 will be made at the unit bid price per each, �,,,
which will be complete compensation for:
• All labor, equipment, materials, and hauling
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �
location, protecting and providing temporary support of existing utilities
�
74
�
� 09/08/2017
� • Pavement cutting(sawcutting), pavement removal, excavation and shoring
• Dewatering,temporary bypass pumping and control of water
• Removal and disposal of waste material including existing pipes and structures in the excavation
•r and any abandoned utilities
• Furnishing and placing foundation material
• Precast concrete catch basin, gaskets, catch basin frame and lid, installation, adjustment of
�+ frames to grade, appurtenances, Kor-N-Seal boots (or approved equal), connections to new
pipes, reconnections to existing pipes including pipe and couplings, placement of subsequent
backfill materials, compaction, water, cleaning, and testing, etc. required in conformance with
� the Contract Documents.
• Furnishing and placing temporary pavement patching
� Select imported backfill material is included in other bid items. Maximum pay limit for select
imported backfill material around structures shall be limited to 3-feet.
�r 1-09.14(2JAN Catch Basin Type IL with Special Frame and Grate(Bid Item A-29J—Each
Section 1-09.14(2)AN is a new section:
�******�
� Measurement for furnishing and installing catch basin Type 1L with special grate will be per each for
each catch basin installed in conformance with the Contract Documents.
� Payment for furnishing and installing catch basin Type 1L with special grate will be made at the unit
bid price per each,which will be complete compensation for:
• All labor, equipment, materials, and hauling
wr, • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, protecting and providing temporary support of existing utilities
• Pavement cutting(sawcutting), pavement removal, excavation and shoring
�rr • Dewatering,temporary bypass pumping and control of water
• Removal and disposal of waste material including existing pipes and structures in the excavation
and any abandoned utilities
+� • Furnishing and placing foundation material
• Precast concrete catch basin, gaskets, catch basin frame and lid, installation, adjustment of
frames to grade, appurtenances, Kor-N-Seal boots (or approved equal), connections to new
� pipes, reconnections to existing pipes including pipe and couplings, placement of subsequent
backfill materials, compaction, water, cleaning, and testing, etc. required in conformance with
the Contract Documents.
� • Furnishing and placing temporary pavement patching
Select imported backfill material is included in other bid items. Maximum pay limit for select
� imported backfill material around structures shall be limited to 3-feet.
1-09.14(2JA0 Catch Basin Type 2,48-inch Diameter(Bid Item A-30)—Each
.r� Section 1-09.14(2)AO is a new section:
(******�
Measurement for catch basin Type 2, 48-inch diameter will be measured per each installed in
'� conformance with the Contract Documents.
wr
75
rrr
09/08/2017 �
Payment for catch basin Type 2, 48-inch diameter will be made at the contract unit price and will �
constitute full compensation for:
• All labor, equipment, materials, and hauling
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �
location, protecting and providing temporary support of existing utilities
� Pavement cutting(sawcutting), pavement removal, excavation and shoring
• Dewatering,temporary bypass pumping and control of water �
� Removal and disposal of waste material including existing pipes and structures in the excavation
and any abandoned utilities
• Furnishing and placing foundation material �
• Precast concrete catch basin, gaskets, catch basin frame and lid, installation, adjustment of
frames to grade, appurtenances, Kor-N-Seal boots (or approved equal), connections to new
pipes, reconnections to existing pipes including pipe and couplings, placement of subsequent �
backfill materials, compaction, water, cleaning, and testing, etc. required in conformance with
the Contract Documents.
• Furnishing and placing temporary pavement patching
�r
Select imported backfill material is included in other bid items. Maximum pay limit for select
imported backfill material around structures shall be limited to 3-feet. �
1-09.14(2)AP Controlled Density Fill(Bid Item A-31J—Cubic Yard
Section 1-09.14(2)AP is a new section: '�
(******�
Measurement for Control Density Fill will be per cubic yard in conformance with the Contract �
Documents. All use of CDF shall be pre-approved by the Engineer. CDF used beyond the agreed
amount or CDF used without prior Engineer approval will not be paid.
Payment will be made at contract unit price and will constitute full compensation for all material, �
equipment, tools, labor, and all necessary for and incidental to the installation of Control Density Fill
in accordance with the Contract Documents and as directed by the Engineer.
Payment for this item will be only for the control density fill pre-approved by the City. If no control �'
density fill is authorized under this bid item,final payment for this item will be $0 (zero). The control
density fill bid item is exempt from Section 1-04.6 and no price adjustment will be made for variation
in actual quantity used. �
The Control Density Fill bid item is exempt from Section 1-04.6 and no price adjustment will be made
for variation in actual quantity used.
r
1-09.14(2JAQ Sewer Service Relocation for Stormwater Conflict(Bid Item A-32)—Each
Section 1-09.14(2)AQ is a new section:
�******� �rr
Measurement for sewer service relocation for stormwater conflict will be per each in conformance
with Contract Documents. Only those sewer service relocations authorized by the City in advance �
will be paid.
Payment for sewer service relocation for stormwater conflict will be made at the unit price per each,
which will be complete compensation for all labor, equipment, material, to relocate an existing side �
sewer service to avoid a conflict with the new storm, including but not limited to hauling,
sawcutting, excavation, dewatering, temporary control of sewer or sewer bypass pumping, removal
�
76
�
+�r o9ioai2o��
ww and disposal of waste material including existing sewer service piping, pipe of the size and material
type required, gaskets, fittings and adaptors, installation, laying and jointing pipe and fittings,
furnishing and placing pipe zone bedding material and pipe zone fill material, appurtenances,
�r placement of subsequent backfill materials, compaction, water, grading, cleaning, and testing, etc.
required to complete the work in accordance with the Contract Documents. Select Imported Trench
Backfill above the pipe zone bedding, if used, is included in other bid items.
"'� There shall be no separate payment for adjusting the new storm pipe profile to avoid a conflict with
the sewer. This shall be considered incidental to other bid items.
To provide a common basis for all bidders, the Contracting Agency has entered a quantity for this
� bid item, however, the actual quantity is unknown and may be zero. If no sewer service relocation
for stormwater conflicts are authorized under this bid item, final payment for this item will be $0
(zero).
w�
1-09.14(2)AR Abandon Existing Manhole(Bid Item A-33J—Each
Section 1-09.14(2)AR is a new section:
�' �******�
Measurement for abandon existing manhole will be per each performed in conformance with the
� Contract Documents.
The unit price per each for abandon existing manhole shall be full pay for all labor, equipment,
material, and equipment to plug pipe connections, remove and dispose of top 4 feet of structure and
,�, filling remaining structure with sand in accordance with the standard specifications. The ring and
cover shall be salvaged if requested by the City.
;,�, The following subsection provides the measurement and payment information of the Bid Items
specific to Schedule B–Wastewater.
'�' 1-09.14(2JBA Furnish and Insta118-inch PVC Sewer Pipe(Bid Item 8-14)—Linear Foot
Section 1-09.14(2)BA is a new section:
�******�
'�' Measurement for "Furnish and Install 8-Inch PVC Sewer Pipe" will be based on linear footage
measured horizontally over the centerline of the installed pipe.
� Payment for furnish and install 8-Inch PVC Sewer Pipe will be made at the amount bid per linear
foot, which payment will be complete compensation for all labor, materials, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be
«+�+ limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
� location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed),
+� • Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
�+ the excavation
rr
77
�r+i
o9iosizo�� t�
• Furnishing, installing, laying and joining sewer pipes and fittings of the size and type shown, and �
all incidentals,
• Ethafoam pads(when needed),
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans, irr
• Placing and compacting trench backfill,
• Air-Testing(if required)
• Replacing, protecting and/or maintaining existing utilities, �
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2)88 Furnish and Install 8-inch HDPE Sewer Pipe(Bid Item 8-15J—Linear Foot
Section 1-09.14(2)BB is a new section:
�******� �i
Measurement for"Furnish and Install 8-Inch HDPE Sewer Pipe" will be based on linear footage
measured horizontally over the centerline of the installed pipe.
�
Payment for furnish and install 8-Inch HDPE Sewer Pipe will be made at the amount bid per linear
foot, which payment will be complete compensation for all labor, materials, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be �
limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary. :
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed), ,�
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in �
the excavation,
• Furnishing, installing, laying and joining sewer pipes, fittings and couplings of the size and type
shown, and all incidentals, „�;
• Ethafoam pads(when needed),
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill, �
• Air-Testing(if required)
• Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching. +�
1-09.14(2)BC Furnish and Insta1110-inch PVC Sewer Pipe(Bid Item 8-16)—Linear Foot �
Section 1-09.14(2)BC is a new section:
�******�
Measurement for "Furnish and Install 10-Inch PVC Sewer Pipe" will be based on linear footage ,�
measured horizontally over the centerline of the installed pipe.
Payment for furnish and install 10-Inch PVC Sewer Pipe will be made at the amount bid per linear �
foot, which payment will be complete compensation for all labor, materials, equipment required to
�
78
�
� o9iosizo��
�rr complete the work specified in the contract documents and plans, and shall include but not be
limited to the following:
+r,r • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
�rr • Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed),
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
� gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
• Furnishing, installing, laying and joining sewer pipes, fittings and couplings of the size and type
+� shown, and all incidentals,
� Ethafoam pads (when needed),
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
'�"' • Placing and compacting trench backfill,
• Air-Testing (if required)
• Replacing, protecting and/or maintaining existing utilities,
"'r"' • Furnishing and Placing Temporary Pavement Patching.
+� 1-09.14(2)BD Furnish and Insta116-inch PVC Side Sewer Pipe(Bid Item 8-17J—Linear Foot
Section 1-09.14(2)BD is a new section:
(******�
rr Measurement for "Furnish and Install 6-Inch PVC Side Sewer Pipe" will be based on linear
footage measured horizontally over the centerline of the installed pipe.
,�, Payment for furnish and install 6-Inch PVC Side Sewer Pipe will be made at the amount bid per linear
foot, which payment will be complete compensation for all labor, materials, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be
,,, limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
;,r,,,, location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
� Saw cutting up to 12" in depth,trench excavation, and dewatering (if needed),
�„ • Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
wr the excavation,
• Furnishing, installing, laying and joining sewer pipes, fittings and couplings of the size and type
shown, and all incidentals,
rrr • Furnishing and installing cleanout frame and cover,
• Furnishing and installing concrete around cleanout frame (as required by the project plans),
• Ethafoam pads (when needed),
+`w+ • Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill,
■w
79
+r
o9ioai2o�� �
• Air-Testing(if required) �
• Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2)BE Furnish and Insta114-inch or 6-inch CIPP Side Sewer Pipe(Bid Item 8-IS)—Each
Section 1-09.14(2)BE is a new section: �
�******�
Measurement for "Furnish and Install 4- inch or 6-Inch CIPP Side Sewer Pipe" will be based on
linear footage measured horizontally over the centerline of the installed pipe. �
Payment for furnish and install 4-inch or 6-Inch CIPP Side Sewer Pipe will be made at the amount bid
per linear foot, which payment will be complete compensation for all labor, materials, equipment '
required to complete the work specified in the contract documents and plans, and shall include but �
not be limited to the following:
• Equipment and tools need to confirm size and suitability for lining of each side sewer stub as �
shown on the project plans,
• Saw cutting up to 12" in depth, trench excavation, and dewatering(if needed), �
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in �
the excavation,
• Furnishing and installing the CIPP sewer pipes of the size necessary,
• Post installation CCTV Inspection. �
1-09.14(2)BF Furnish and Install lnternal Sewer Drop in Existing Manhole(Bid Item 8-19)—Each
Section 1-09.14(2)BF is a new section: '�
(******�
Measurement for "Furnish and Install Internal Sewer Drop in Existing Manhole" will be per
each for each internal sewer drop installed in conformance with the Contract Documents. "�
(Drawing 5-6 of the Plans).
Payment for furnish and install internal sewer drop in existing manhole will be made at the amount �
bid per each, which payment will be complete compensation for all labor, materials, equipment
required to complete the work specified in the contract documents and plans, and shall include but
not be limited to the following: �
� Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of �
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth, trench excavation, and dewatering (if needed),
• Bypass sewer pumping(if needed), "�
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
rw
�
80
�
�r o9iosiao»
+r • Furnishing, installing, joining and attaching sewer pipes, fittings, couplings and mounting
brackets of the size and type shown for the internal drop, and all incidentals,
• Core-drilling of the existing manhole and installation of a Kor-N-Seal boot(or approved equal),
+■+ • Furnishing and installing concrete and aggregate for plugging existing outside drop,
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill,
"� • Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2JBG Furnish and Install Sanitary Sewer Manhole Extra Shallow(Bid Item 8-20)—Each
Section 1-09.14(2)BG is a new section:
;�, �******�
Measurement for "Furnish and Install Shallow Sanitary Sewer Manhole Extra Shallow" will be
per each for each type manhole installed in conformance with the Contract Documents.
�r
Payment for furnish and install shallow sanitary sewer manhole extra shallow will be made at the
amount bid per each, which payment will be complete compensation for all labor, materials,
,,,, equipment required to complete the work specified in the contract documents and plans, and shall
include but not be limited to the following:
„�, • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
„�, • Saw cutting up to 12" in depth,trench excavation, and dewatering (if needed),
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
„�„ gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
• Furnishing, install precast or poured-in-place concrete base, concrete manhole sections,gaskets,
,�„ Kor-N-Seal boots (or approved equal), ladder and rungs, appurtenances, connections,
channeling, reconnection to existing sewer pipes including pipe and couplings, coating system
(sealer), manhole frame and lid,
„r, • Furnishing and installing material to adjustment of frames to grade including HMA,
• Furnishing foundation and bedding materials, placing and compacting foundation and bedding,
• Placing and compacting backfill,
+rr • Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching.
�r
1-09.14(2JBH Furnish and Insta1154-inch Shallow Sanitary Sewer Manhole(Bid Item 8-21J—Each
Section 1-09.14(2)BH is a new section:
rrr �******�
Measurement for "Furnish and Install 54-inch Diameter Shallow Sanitary Sewer Manhole" will
be per each for each type manhole installed in conformance with the Contract Documents.
�rr
Payment for furnish and install 54-inch diameter shallow sanitary sewer manhole will be made at
the amount bid per each, which payment will be complete compensation for all labor, materials,
�rr
81
�rr
09/08/2017 �
equipment required to complete the work specified in the contract documents and plans, and shall �
include but not be limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical „�,
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth,trench excavation, and dewatering (if needed), �
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in �
the excavation,
� Furnishing, install precast or poured-in-place concrete base, concrete manhole sections, gaskets,
Kor-N-Seal boots (or approved equal), ladder and rungs, appurtenances, connections, �
channeling, reconnection to existing sewer pipes including pipe and couplings, coating system
(sealer), manhole frame and lid,
• Furnishing and installing material to adjustment of frames to grade including HMA, �►
• Furnishing foundation and bedding materials, placing and compacting foundation and bedding,
• Placing and compacting backfill,
• Replacing, protecting and/or maintaining existing utilities, '�
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2)81 Furnish and Install 54-inch Sanitary Sewer Manhole(Bid Item 8-22J—Each
Section 1-09.14(2)BI is a new section: -
�******� �i
Measurement for "Furnish and Install 54-inch Diameter Sanitary Sewer Manhole" will be per
each for each type manhole installed in conformance with the Contract Documents.
�
Payment for furnish and install 54-inch diameter sanitary sewer manhole will be made at the
amount bid per each, which payment will be complete compensation for all labor, materials,
equipment required to complete the work specified in the contract documents and plans, and shall ,�;�
include but not be limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �;
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed), �
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in „�
the excavation,
• Furnishing, install precast or poured-in-place concrete base, concrete manhole sections, gaskets,
Kor-N-Seal boots (or approved equal), ladder and rungs, appurtenances, connections, „�
channeling, reconnection to existing sewer pipes including pipe and couplings, coating system
(sealer), manhole frame and lid,
• Furnishing and installing material to adjustment of frames to grade including HMA, ,�
• Furnishing foundation and bedding materials, placing and compacting foundation and bedding,
• Placing and compacting backfill,
�
82
�r
�+• o9iosizo»
+w�r • Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching.
�rr
1-09.14(2)BJ Furnish and Insta1160-inch Sanitary Sewer Manhole with Inside Drop(eid Item 8-23J—Each
Section 1-09.14(2)BJ is a new section:
�
�******�
Measurement for "Furnish and Install 60-inch Diameter Sanitary Sewer Manhole with Inside
Drop" will be per each for each type manhole installed in conformance with the Contract
,� Documents.
Payment for furnish and installing 60-inch diameter sanitary sewer manhole with inside drop will be
�wr
made at the amount bid per each, which payment will be complete compensation for all labor,
materials, equipment required to complete the work specified in the contract documents and plans,
and shall include but not be limited to the following:
� • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of
+rr
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed),
• Bypass sewer pumping (if needed),
�
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
�r
• Furnishing, install precast or poured-in-place concrete base, concrete manhole sections, gaskets,
Kor-N-Seal boots (or approved equal), ladder and rungs, appurtenances, connections,
channeling, reconnection to existing sewer pipes including pipe, couplings and bends, coating
� system (sealer), manhole frame and lid,
• Furnishing and installing clamping brackets, inside-drop pipe, laying and joining new sewer pipe
to the inside-drop, bends,
,,,, • Furnishing and installing material to adjustment of frames to grade including HMA,
• Furnishing foundation and bedding materials, placing and compacting foundation and bedding,
• Placing and compacting backfill,
,■, • Replacing, protecting and/or maintaining existing utilities,
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2)BK Furnish and Insta118-inch Sewer Cleanout(Bid Item 8-24)—Each
Section 1-09.14(2)BK is a new section:
�******�
awr
Measurement for "Furnish and Install 8-Inch Sewer Cleanout" will be per each for the
installation of C.O. #2 as shown on Drawing Number S-4 of the project plans an in
a�r
conformance with the Contract Documents.
Payment for furnish and install 8-Inch sewer cleanout will be made at the amount bid per each,
which payment will be complete compensation for all labor, materials, equipment required to
� complete the work specified in the contract documents and plans, and shall include but not be
limited to the following:
wr
83
�
09/08/2017 �
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical ,�
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed), ,�
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in ,rr�
the excavation,
� Furnishing, installing, laying and joining sewer pipes, fittings and couplings of the size and type
shown, and all incidentals, �
• Furnishing and installing cleanout frame and cover,
• Furnishing and installing concrete around cleanout frame (as required by the project plans),
• Furnishing and installing material to adjustment of frames to grade, �►
• Furnishing foundation and bedding materials, placing and compacting foundation and bedding,
• Placing and compacting backfill,
• Replacing, protecting and/or maintaining existing utilities, �
• Furnishing and Placing Temporary Pavement Patching.
�
1-09.14(2)BL Furnish and Insta116-inch Sewer and Cleanout in Easement (Bid Item 8-25)—Lump Sum
Section 1-09.14(2)BL is a new section:
�******�
�
Measurement for "Furnish and Install 6-Inch Sewer and Cleanout in Easement" will be per
each for the installation as shown on Drawing Number 5-11 of the project plans an in
conformance with the Contract Documents. �it
Payment for furnish and install 6-inch sewer and cleanout in easement will be made at the amount
bid per each, which payment will be complete compensation for all labor, materials, equipment ,�
required to complete the work specified in the contract documents and plans, and shall include but
not be limited to the following:
�
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary. ,�,
• Trench excavation, and dewatering (if needed),
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs, �
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
• Furnishing, installing, laying and joining sewer pipes, fittings and couplings of the size and type +rwi
shown (approximately 15 linear feet of 6" PVC and three 6"x6"tees), and all incidentals,
• Furnishing and installing cleanout frame and cover,
• Furnishing and installing concrete around cleanout frame (as required by the project plans), �
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill,
• Landscape restoration. �
�
84
�
�' 09/08/2017
�
1-09.14(2JBM Connect New Sewer to Existing Sewer Manhole (Bid Item 8-26)—Each
�
Section 1-09.14(2)BM is a new section:
�******�
Measurement for "Connect New Sewer to Existing Sewer Manhole" will be per each in
� conformance with the Contract Documents and includes the connection of the new 8" PVC
sanitary sewer to the existing brick manhole at the intersection of S 7th St and Beacon Way S
(Drawing S-8 of the Plans).
�
Payment for connect new sewer to existing sewer manhole will be made at the amount bid per
each, which payment will be complete compensation for all labor, materials, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be
� limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
`� location, includin
g potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
• Trench excavation, and dewatering(if needed),
� • Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
� gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation,
• Core-drilling of existing manhole,
�r
• Furnish and install new Kor-N-Seal boot, sand collar(or approved equal)and grouting,
• Connection of new sewer to existing manhole,
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
,� � Placing and compacting trench backfill,
• Furnishing and Placing Temporary Pavement Patching.
� 1-09.14(2)BN Pre-installation Cleaning and Inspection for CIPP in Easemenf(Bid Item 8-27J—Linear Foot
Section 1-09.14(2)BN is a new section:
(******�
� Measurement for"Pre-Installation Cleaning and Inspection for CIPP in Easement"will be based on
the linear feet of pipe inspected and cleaned as shown on Drawing Number 5-11 of the project
plans.
+rr
Payment for Pre-Installation Cleaning and Inspection for CIPP in Easement will be made at the
amount bid per linear foot, which payment will be complete compensation for all labor, materials,
� equipment required to complete the work specified in the contract documents and plans, and shall
include but not be limited to the following:
"'� � bypass sewer routing if necessary.
• cleaning,
• root cutting and removal of obstructions,
`�`" • removal and disposal of waste material,
• water,
�
85
r
o9ioai2o»
�rr
• CCN inspection in a PACP compatible format and provision of the CCN record on an external �
HDD to the Engineer,
1-09.14(2J80 Furnish and Install6-inch Cured-in-place Pipe in Easement (Bid Item B-28)—Linear Foot �
Section 1-09.14(2)BO is a new section:
�******�
Measurement for "Furnish and Install 6-Inch Cured-In-Place Pipe in Easement" will be based on the �
linear feet of 6-Inch cured-in-place pipe installed. The length will be the number of linear feet of
completed installation measured along the invert and will include the length through elbows, tees
and fittings. The number of linear feet will be measured from the center of manhole to center of �
manhole, center of cleanout or the actual end of the cured-in-place pipe if it does not end in a
structure.This bid item is for the CIPP work as shown on Drawing Number 5-11 of the project plans. `
�
Payment for pre-installation cleaning and inspection for CIPP in easement will be made at the
amount bid per linear foot, which payment will be complete compensation for all labor, materials, �
equipment required to complete the work specified in the contract documents and plans, and shall
include but not be limited to the following:
• bypass sewer routing if necessary,
w�►
• dewatering,
� cleaning, �
• root cutting and removal of obstructions,
• furnishing and installing 6" diameter CIPP,
• removal and disposal of waste material, �
• water
1-09.14(2)BP Side Sewers for 1006&1012 High Ave S (Bid Item 8-29)—Each '
Section 1-09.14(2)BP is a new section: �
�******�
Measurement for"Side Sewers for 1006 & 1012 High Ave S"will be per each for each side sewer �
lateral reestablished in conformance with the Contract Documents.This bid item is for the
reconnection of the houses at 1006& 1012 High Ave S to the sanitary sewer system as shown on
Drawing Number 5-11 of the project plans. `
�
Payment for side sewers for 1006 & 1012 High Ave S will be made at the amount bid per each,
which payment will be complete compensation for all labor, materials, equipment required to �
complete the work specified in the contract documents and plans, and shall include but not be
limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
�
location,
• dewatering (if needed), �
• Bypass sewer pumping(if needed),
• Removal, hauling and disposal of waste materials including but not limited to sod, unsuitable
excavated material,existing pipes and structures in the excavation, �
• Furnishing, installing (including hand excavation if necessary), laying and joining sewer pipes,
fittings and couplings of the size and type shown, and all incidentals,
�
86
�
'�' 09/08/2017
+r� • Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill,
• Replacing, protecting and/or maintaining existing utilities,
'� • Furnishing and Placing landscape restoration materials.
1-09.14(2JBQ Post-Installation CCTV Inspection of CIPP (Bid Item 8-30J—Linear Foot
+rw Section 1-09.14(2)BQ is a new section:
�******�
Measurement for"Post-Installation CCTV Inspection of CIPP"will be based on the linear feet of
�r cured-in-place pipe inspected as shown on Drawing Number 5-11 of the project plans.
Payment for Post-Installation CCTV Inspection of CIPP will be made at the amount bid per linear
.�r foot, which payment will be complete compensation for all labor, materials, equipment required to
complete the work specified in the contract documents and plans, and shall include but not be
limited to the following:
,rr
• Bypass sewer pumping(if needed),
• CCN inspection of the CIPP rehabilitated sewer as shown on Drawing Number 5-11,
+rr • Delivery of the CCTV inspections entirely in a PACP compatible format data base on an External
HDD to the Engineer.
� The following subsection provides the measurement and payment information of the Bid Items
specific to Schedule C–Water.
1-09.14(2JCA Furnish and Insta118',6';and 4"C152 DI Water Pipe&Fittings w/Polywrap(Bid Item C-I5,G
'� 16,&C-17J—Linear Foot
Section 1-09.14(2)CA is a new section:
�******)
""'� Measurement for furnishing and installing water pipes and fittings of the size, type and class
specified will be based on the actual lineal footage measured horizontally over the centerline of the
installed pipe.
�
Payment for furnishing and installing ductile iron water pipes and fittings of the size, type and class
specified shall cover the complete cost of providing all labor, materials,tools, equipment required to
� complete the work specified in the contract documents and plans, and shall include but not be
limited to the following:
wr • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location, including potholing in advance for existing side sewers and television inspection of
existing sanitary sewer to determine location of side sewer branches if necessary.
� • Saw cutting up to 12" in depth,trench excavation, and dewatering (if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
� • Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
� Furnishing, installing, laying and jointing water pipes and fittings of the size, type and class
"'�' shown, polyethylene encasement, special fittings, horizontal and vertical bends, mechanical
�
87
�
09/08/2017 �
joint pipe restraint, vertical crosses for poly-pigging, shackle rods, temporary blow-off �
assemblies, and all incidentals,
• Furnishing bedding materials, placing and compacting pipe bedding, as shown on the plans,
• Placing and compacting trench backfill, ,�
• Testing, poly-pigging, disinfecting and flushing of new valves,
• Replacing, protecting and/or maintaining existing utilities.
• Furnishing and placing temporary pavement patching r�ii
1-09.14(2JC8 Cut In 6"Gate Valve Assembly(Bid Item G18)–Each
Section 1-09.14(2)CB is a new section: �,
�******�
Measurement for furnishing and installing 6" gate valve cut in will be per each, installed in
conformance with the Contract Documents. �j
Payment for furnishing and installing 6" gate valve cut in shall cover the complete cost of providing
all labor, materials, tools, equipment required to complete the work specified in the contract �
documents and plans, and shall include but not be limited to the following:
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical �
location,
• Saw cutting,trench excavation, and dewatering (if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable �
excavated material including existing pipes and structures in the excavation and the like,
• Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer, �
• Furnishing all required fittings, adapters, couplings and incidentals as required for City's water
department's personnel to perform the installation.
• Placing and compacting trench backfill, ,�
• Replacing, protecting and/or maintaining existing utilities.
• Furnishing and placing temporary pavement patching
�ir
1-09.14(2)CC Furnish and Insfall8',6';&4"Gate Valve Assembly(Bid Item G19,G20,&G21)—Each
Section 1-09.14(2)CC is a new section:
(******� wr�
Measurement for furnishing and installing 8", 6", and 4" gate valve assemblies will be per each for
each type valve installed in conformance with the Contract Documents.
wwri
Payment for furnishing and installing 8", 6", and 4" gate valve assemblies shall cover the complete
cost of providing all labor, materials, tools, equipment required to complete the work specified in
the contract documents and plans, and shall include but not be limited to the following: �
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
wW
• Saw cutting,trench excavation, and dewatering(if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like, �
• Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
�
88
�
� 09/08/2017
�rr • Furnishing and installing valves, valve boxes and covers to grade, stem extensions, valve marker
posts, pipe nipples, couplings, polyethylene encasement, concrete blocking, and all incidentals,
• Placing and compacting trench backfill,
+r+w • Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching
rir 1-09.14(2JCD Concrete for Thrust Blocking,Dead-Man Anchor Blocks(Bid Item C-22)—Cubic Vard
Section 1-09.14(2)CD is a new section:
�******�
wr� Measurement for concrete for thrust blocking, horizontal and vertical, dead-man anchor blocks will
be per cubic yard for all concrete installed for thrust blocking and dead-man anchor blocks in
conformance with the Contract Documents.
� Payment for concrete thrust blocking and dead man anchor blocks shall cover the complete cost of
providing all labor, materials, tools, equipment required to complete the work specified in the
contract documents and plans, and shall include but not be limited to the following:
a�w
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
'� • Saw cutting,trench excavation, shoring and dewatering(if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
`� • Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
�
• Furnishing and placing concrete for vertical and horizontal blocks, dead-man anchor blocks,
reinforcing steel, shackle rods, clamp assembly,anchor bolts,turnbuckles,concrete form work,
-- • Placing and compacting trench backfill,
�
• Replacing, protecting and/or maintaining existing utilities.
� Furnishing and placing temporary pavement patching
1-09.14(2)CE Furnish and Install Fire Hydrant Assembly(Bid Item G23)—Each
`� Section 1-09.14(2)CE is a new section:
�******�
Measurement for furnishing and installing fire hydrant assembly will be per each for each fire
`� hydrant assembly installed in conformance with the Contract Documents.
Payment for furnishing and installing fire hydrant assembly shall cover the complete cost of
"�' providing all labor, materials, tools, equipment required to complete the work specified in the
contract documents and plans, and shall include but not be limited to the following:
"�"` • Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
� Saw cutting,trench excavation, and dewatering(if needed),
'r'" � Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
• Removal of existing fire hydrant, if existing hydrant is being replaced,
"� • Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
rrrr
89
r
o9iosizo�� r�
� Furnishing and installing new fire hydrant assembly, standpipe, shoe, and 6-inch DI piping, Storz �iii
adapter,
• Furnishing and installing shut-off valve,valve box,valve extension,
• Furnishing and installing shackles, tie-rods, concrete blocking, and joint restraints, drain rocks, �
polyfilm,
• Adjust hydrant to finish grade and install concrete shear block, �
• Placing and compacting trench backfill, �
• Testing, disinfecting and flushing of new hydrants,
• Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching �
• Painting the hydrants
1-09.14(2JCF Furnish and Install l"Water Service Connection(Bid Item C-24J—Each �
Section 1-09.14(2)CF is a new section:
�******�
Measurement for furnishing and installing 1" water connection will be per each for each 1" water �
connection installed in conformance with the Contract Documents.
Payment for furnishing and installing 1" water connection shall cover the complete cost of providing �
all labor, materials, tools, equipment required to complete the work specified in the contract
documents and plans, and shall include but not be limited to the following:
w�
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
• Saw cutting,trench excavation as needed, shoring and dewatering(if needed), ri
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
• Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by �
the Engineer,
• Boring, hole-hogging,tunneling, mechanical or hand trenching to install new water service lines,
• Furnishing and installing new 1- inch ball valve corporation stops, tapping the main, laying and �
jointing the new copper water service lines and fittings, new meter setter, new meter boxes and
lids,
• Testing, disinfecting and flushing the new service line, �
� Connecting the customer-side private service line to the new copper tailpiece behind the new
meter setter and property lines,
• Placing and compacting trench backfill, "i�
• Replacing, protecting and/or maintaining existing utilities.
• Restoration of public and private properties
• Furnishing and placing temporary pavement patching �
1-09.14(2)CG Furnish and Install Air Release and Vacuum Valve Assembly(eid Item G25J—Each
Section 1-09.14(2)CG is a new section: �
�******�
Measurement for air release and vacuum valve assembly will be per each unit installed for
completion in conformance with the Contract Documents. �
�
90
�
++�+�' 09/08/2017
+rw Payment for air release and vacuum valve assembly shall cover the complete cost of providing all
labor, materials, tools, equipment required to complete the work specified in the contract
documents and plans, and shall include but not be limited to the following:
r�r
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
rrr • Saw cutting,trench excavation, shoring and dewatering (if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
+w� • Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
• Concrete blocking, extension of the vent lines, installation of concrete and rock pads,
� • Testing,flushing and cleanup, connection to mainline,
� Placing and compacting trench backfill,
• Testing, poly-pigging, disinfecting and flushing of new valves,
""" • Replacing, protecting and/or maintaining existing utilities.
� Furnishing and placing temporary pavement patching
� 1-09.14(2JCH Connection to Existing Water Main(Bid Item C-26J—Each
Section 1-09.14(2)CH is a new section:
�******�
� Measurement for connection to existing water main will be per each connection for completion in
conformance with the Contract Documents.
� Payment for connection to existing water main shall cover the complete cost of providing all labor,
materials, tools, equipment required to complete the work specified in the contract documents and
plans, and shall include but not be limited to the following:
�
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
+� • Saw cutting,trench excavation, shoring and dewatering (if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material including existing pipes and structures in the excavation and the like,
�► • Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
• Furnishing all required pipes, fittings, adapters, couplings and incidentals as required for City's
+� water department's personnel to perform the initial cut-in installation of valves, and fittings on
the existing water main(s),
• Furnishing all required pipes, fittings, adapters, couplings and incidentals as required for City's
+� water department's personnel to perform the second and final connection of the new water line
to the existing water system and to the valves installed during the initial cut-in as described
a bove,
� • Placing and compacting trench backfill,
� Replacing, protecting and/or maintaining existing utilities
• Furnishing and placing temporary pavement patching
�
1-09.14(2JCl Cut,Cap,and Block Existing Water Main(Bid Item G27J—Each
Section 1-09.14(2)CI is a new section:
�
91
�
o9iosi2o�� �i
(******� �
Measurement for cut, cap, and block existing water main will be per each in conformance with the
Contract Documents.
�
Payment for cut, cap, and block water main shall cover the complete cost of providing all labor,
materials, tools, equipment required to complete the work specified in the contract documents and
plans, and shall include but not be limited to the following: �
• Locating all existing utilities and potholing in advance to determine their horizontal and vertical
location,
�
� Saw cutting,trench excavation, shoring and dewatering(if needed),
• Removal, hauling and disposal of pavement, curbs, gutters, sidewalks, surplus and unsuitable
excavated material, excluding any asbestos cement pipe or fittings �
• Stockpiling suitable excavated material for use as pipe bedding and trench backfill as directed by
the Engineer,
• Furnishing all required pipes, fittings, adapters, couplings and incidentals as required for City's �
water department's personnel to perform the cut and cap,
• Excavating for and installing thrust block,
• Placing and compacting trench backfill, �j
• Replacing, protecting and/or maintaining existing utilities.
• Furnishing and placing temporary pavement patching
�
1-09.14(2)G Furnish and Insta1110"AWWA C900 Sewer Pipe(Bid Item C-26)—Linear Foot
Section 1-09.14(2)CJ is a new section:
�******� +r�t
Measurement for"Furnish and Install 10-inch AWWA C900 Sewer Pipe" will be based on linear
footage measured horizontally over the centerline of the installed pipe.
�
Payment for furnish and install 10-inch AWWA C900 Sewer Pipe will be made at the amount bid per
linear foot, which payment will be complete compensation for all labor, materials, equipment
required to complete the work specified in the contract documents and in connection detail 9, �
Drawing W-21 of the plans, and shall include but not be limited to the following:
• Equipment and tools need to confirm size and suitability for lining of each side sewer stub as ''`
shown on the project plans,
�
• Saw cutting up to 12" in depth,trench excavation, and dewatering(if needed),
• Bypass sewer pumping(if needed), �
• Removal, hauling and disposal of waste materials including but not limited to pavement, curbs,
gutters, sidewalks, surplus and unsuitable excavated material, existing pipes and structures in
the excavation, �
• Furnishing and installing the CIPP sewer pipes and couplings of the size necessary,
• Post installation CCTV Inspection.
• Furnishing and placing temporary pavement patching �
�
�
92
�wf
++�� 09/08/2017
„�, 1-10 TEMPORARY TRAFFIC CONTROL
1-10.1 General
�"' Revise the first paragraph to read:
�******�
The Contractor shall provide flaggers, signs, and other traffic control devices not otherwise specified
� as being furnished by the Contracting Agency. The Contractor shall erect and maintain all
construction signs, warning signs, detour signs, and other traffic control devices necessary to warn
and protect the public at all times from injury or damage as a result of the Contractor's operations
which may occur on highways, roads, streets, sidewalks, or paths. No Work shall be done on or
.r, adjacent to any traveled way until all necessary signs and traffic control devices are in place.
Section 1-10.1 is supplemented by adding the following:
�******�
'�" When the bid proposal includes an item for"Traffic Control;'the Work required for this item shall be
all items described in Section 1-10, including, but not limited to:
1. Furnishing and maintaining barricades, flashers, construction signing, and other
� channelization devices, unless a pay item is in the bid proposal for any specific device and
the Special Provisions specify furnishing, maintaining, and payment in a different manner
for that device;
2. Furnishing traffic control labor, equipment, and supervisory personnel for all traffic control
�r labor;
3. Furnishing any necessary vehicle(s) to set up and remove the Class B construction signs
and other traffic control devices;
4. Furnishing labor and vehicles for patrolling and maintaining in position all of the
"�' construction signs and the traffic control devices, unless a pay item is in the bid proposal
to specifically pay for this Work; and
5. Furnishing labor, material, and equipment necessary for cleaning up, removing, and
� replacing of the construction signs and the traffic control devices destroyed or damaged
during the life of the project.
6. Removing existing signs as specified or as directed by the Engineer and delivering to the
City Shops, or storing and reinstalling as directed by the Engineer.
,,,r 7. Preparing a traffic control plan for the project and designating the person responsible for
traffic control at the Work site. The traffic control plan shall include descriptions of the
traffic control methods and devices to be used by the prime Contractor, and
subcontractors, shall be submitted at or before the preconstruction conference, and shall
'�" be subject to review and approval of the Engineer.
8. Contacting police,fire, 911, and ambulance services to notify them in advance of any Work
that will affect and traveled portion of a roadway.
� 9. Assuring that all traveled portions of roadways are open to traffic during peak traffic
periods, 6:30 a.m. to 8:30 a.m., and 3:00 p.m. to 6:00 p.m., or as specified in the special
provisions, or as directed by the Engineer.
10. Promptly removing or covering all non-applicable signs during periods when they are not
,�„ needed.
If no bid item "Traffic Control" appears in the proposal, then all Work required by these sections will
be considered incidental and their cost shall be included in the other items of Work.
�
If the Engineer requires the Contractor to furnish additional channelizing devices, pieces of
equipment, or services, which could not be usually anticipated, by a prudent Contractor for the
� maintenance and protection of traffic, then a new item or items may be established to pay for such
items. Further limitations for consideration of payment for these items are that they are not covered
by other pay items in the bid proposal, they are not specified in the Special Provisions as incidental,
and the accumulative cost for the use of each individual channelizing device, piece of equipment, or
wr� service must exceed $200 in total cost for the duration of their need. In the event of disputes, the
Engineer will determine what is usually anticipated by a prudent Contractor. The cost for these
items will be by agreed price, price established by the Engineer, or by force account. Additional
rs
93
�
09/08/2017 �
items required as a result of the Contractor's modification to the traffic control plan(s) appearing in �
the Contract shall not be covered by the provisions in this paragraph.
If the total cost of all the Work under the Contract increases or decreases by more than 25 percent,
an equitable adjustment will be considered for the item "Traffic Control" to address the increase or +rr►
decrease.
Traffic control and maintenance for the safety of the traveling public on this project shall be the sole �
responsibility of the Contractor and all methods and equipment used will be subject to the approval
of the Owner.
Traffic control devices and their use shall conform to City of Renton standards and the Manual on �
Uniform Traffic Control Devices(MUTCDJ.
The Contractor shall not proceed with any construction until proper traffic control has been provided
to the satisfaction of the Engineer. Any days lost due to improper traffic control will be charged �
against the Contractor's allowable contract time, and shall not be the cause for a claim for extra days
to complete the Work.
1-10.2(1)B Traffic Control Supervisor �
Paragraphs 1 and 2 are revised as follows:
�******�
A Traffic Control Supervisor (TCS) shall be on the project whenever traffic control labor is required or �
as authorized by the Engineer.
The TCS shall assure that all the duties of the TCS are performed during the duration of the Contract.
During non-Work periods, the TCS shall be able to be on the job site within a 45-minute time period r�
after notification by the Engineer.
1-10.2(2) Traffic Control Plans `
Section 1-10.2(2) is supplemented as follows: �
(******�
The Contractor shall be responsible for assuring that traffic control is installed and maintained in
conformance to established standards. The Contractor shall continuously evaluate the operation of �
the traffic control plan and take prompt action to correct any problems that become evident during
operation.
1-10.3 Flagging, Signs, and All Other Traffic Control Devices +r�i
Section 1-10.3 is supplemented as follows:
�******�
At the end of each working day, provisions shall be made for the safe passage of traffic and '
pedestrians during non-working hours. �'
Barricades shall be reflectorized as specified in Part VI of the MUTCD, and shall be 3M-diamond
grade or equivalent approved by the Engineer. Barricades shall also be equipped with flashers. �
1-10.3(3) Construction Signs
Section 1-10.3(3) paragraph 4 is supplemented as follows:
(******�
�
No separate pay item will be provided in the bid proposal for Class A or Class B construction signs.All
costs for the Work to provide Class A or Class B construction signs shall be included in the unit
contract price for the various other items of the Work in the bid proposaL "
�
1-10.4 Measurement
Section 1-10.4 is replaced with: �
�******�
No specific unit of ineasurement will apply to the lump sum item of"Traffic Control".
�
94
a�i
'� 09/08/2017
�
No adjustment in the lump sum bid amount will be made for overtime Work or for use of relief
flaggers.
� 1-10.5 Payment
Section 1-10.5 is replaced with:
�******�
Payment for all labor, materials, and equipment described in Section 1-10 will be made in
�" accordance with Section 1-04.1, for the following bid items when included in the proposal:
"Traffic Control," Lump Sum.
�r
1-11 RENTON SURVEYING STANDARDS
The following is a new section with new subsections:
(******�
� 1-11.1(1) Responsibility for Surveys
All surveys and survey reports shall be prepared under the direct supervision of a person registered
to practice land surveying under the provisions of Chapter 18.43 RCW.
.r►
All surveys and survey reports shall be prepared in accordance with the requirements established by
the Board of Registration for Professional Engineers and Land Surveyors under the provisions of
Chapter 18.43 RCW.
�
1-11.1(2) Survey Datum and Precision
The horizontal component of all surveys shall have as its coordinate base: The North American
� Datum of 1983/91.
All horizontal control for projects must be referenced to or in conjunction with a minimum of two of
the City of Renton's Survey Control Network monuments. The source of the coordinate values used
�rr will be shown on the survey drawing per RCW 58.09.070.
The horizontal component of all surveys shall meet or exceed the closure requirements of WAC 332-
130-060. The control base lines for all surveys shall meet or exceed the requirements for a Class A
� survey revealed in Table 2 of the Minimum Standard Detail Requirements for ALTA/ACSM Land Title
Surveys jointly established and adopted by ALTA and ACSM in 1992 or comparable classification in
future editions of said document. The angular and linear closure and precision ratio of traverses
� used for survey control shall be revealed on the face of the survey drawing, as shall the method of
adjustment.
The horizontal component of the control system for surveys using global positioning system
w,r methodology shall exhibit at least 1 part in 50,000 precision in line length dependent error analysis
at a 95 percent confidence level and performed pursuant to Federal Geodetic Control Subcommittee
Standards for GPS control surveys as defined in Geometric Geodetic Accuracy Standards &
Specifications for Using GPS Relative Positioning Techniques dated August 1, 1989, or comparable
""' classification in future editions of said document.
The vertical component of all surveys shall be based on NAVD 1988, the North American Vertical
� Datum of 1988, and tied to at least one of the City of Renton Survey Control Network benchmarks. If
there are two such benchmarks within 3000 feet of the project site a tie to both shall be made. The
benchmark(s) used will be shown on the drawing. If a City of Renton benchmark does not exist
within 3000 feet of a project, one must be set on or near the project in a permanent manner that
,�,�, will remain intact throughout the duration of the project. Source of elevations (benchmark) will be
shown on the drawing, as well as a description of any benchmarks established.
1-11.1(3) Subdivision Information
""'' Those surveys dependent on section subdivision shall reveal the controlling monuments used and
the subdivision of the applicable quarter section.
�
95
�
09/08/2017 �
Those surveys dependent on retracement of a plat or short plat shall reveal the controlling �
monuments, measurements, and methodology used in that retracement.
1-11.1(4) Field Notes
Field notes shall be kept in conventional format in a standard bound field book with waterproof �
pages. In cases where an electronic data collector is used field notes must also be kept with a sketch
and a record of control and base line traverses describing station occupations and what
measurements were made at each point. �
Every point located or set shall be identified by a number and a description. Point numbers shall be
unique within a complete job. The preferred method of point numbering is field notebook, page and
point set on that page. Example: The first point set or found on page 16 of field book 348 would be �
identified as Point No. 348.16.01, the second point would be 348.16.02, etc.
Upon completion of a City of Renton project, either the field notebook(s) provided by the City or the
original field notebook(s) used by the Surveyor will be given to the City. For all other Work, �
Surveyors will provide a copy of the notes to the City upon request. In those cases where an
electronic data collector is used, a hard copy print out in ASCII text format will accompany the field
notes.
�r
1-11.1(5) Corners and Monuments
Corner: A point on a land boundary, at the juncture of two or more boundary lines. A monument is
usually set at such points to physically reference a corner's location on the ground. �
Monument: Any physical object or structure of record, which marks or accurately references:
• A corner or other survey point established by or under the supervision of an individual per �
Section 1-11.1(1) and any corner or monument established by the General Land Office and
its successor the Bureau of Land Management including section subdivision corners down to
and including one-sixteenth corners; and �
• Any permanently monumented boundary, right-of-way alignment, or horizontal and vertical
control points established by any governmental agency or private surveyor including street
intersections but excluding dependent interior lot corners.
�
1-11.1(6) Control or Base Line Survey
Control or Base Line Surveys shall be established for all construction projects that will create
permanent structures such as roads, sidewalks, bridges, utility lines or appurtenances, signal or light
poles, or any non-single family building. Control or Base Line Surveys shall consist of such number of +�
permanent monuments as are required such that every structure may be observed for staking or
"as-builting" while occupying one such monument and sighting another such monument. A
minimum of two of these permanent monuments shall be existing monuments, recognized and on
record with the City of Renton. The Control or Base Line Survey shall occupy each monument in �
turn, and shall satisfy all applicable requirements of Section 1-11.1 herein.
The drawing depicting the survey shall be neat, legible, and drawn to an appropriate scale. North �
orientation should be clearly presented and the scale shown graphically as well as noted. The
drawing must be of such quality that a reduction thereof to one-half original scale remains legible.
If recording of the survey with the King County Recorder is required, it will be prepared on 18 inch by +�
24 inch mylar and will comply with all provisions of Chapter 58.09 RCW. A photographic mylar of the
drawing will be submitted to the City of Renton and, upon their review and acceptance per the
specific requirements of the project,the original will be recorded with the King County Recorder. �
If recording is not required, the survey drawing shall be prepared on 22 inch by 34 inch mylar, and
the original or a photographic mylar thereof will be submitted to the City of Renton.
�
The survey drawings shall meet or exceed the requirements of WAC 332-130-050 and shall conform
to the City of Renton's Drafting Standards. American Public Works Association symbols shall be used
�
96
�
� 09/08/2017
,■, whenever possible, and a legend shall identify all symbols used if each point marked by a symbol is
not described at each use.
An electronic listing of all principal points shown on the drawing shall be submitted with each
'� drawing. The listing should include the point number designation (corresponding with that in the
field notes), a brief description of the point, and northing, easting, and elevation (if applicable)
values, all in ASCII format, on IBM PC compatible media.
� 1-11.1(7) Precision Levels
Vertical Surveys for the establishment of benchmarks shall satisfy all applicable requirements of
Sections 1-05 and 1-11.1.
�
Vertical surveys for the establishment of benchmarks shall meet or exceed the standards,
Specifications and procedures of third order elevation accuracy established by the Federal Geodetic
Control Committee.
�
Benchmarks must possess both permanence and vertical stability. Descriptions of benchmarks must
be complete to insure both recoverability and positive identification on recovery.
� 1-11.1(8) Radial and Station --Offset Topography
Topographic surveys shall satisfy all applicable requirements of Section 1-11.1 herein.
�,,, All points occupied or back sighted in developing radial topography or establishing baselines for
station-offset topography shall meet the requirements of Section 1-11.1 herein.
The drawing and electronic listing requirements set forth in Section 1-11.1 herein shall be observed
�' for all topographic surveys.
1-11.1(9) Radial Topography
Elevations for the points occupied or back sighted in a radial topographic survey shall be determined
�" either by, 1) spirit leveling with misclosure not to exceed 0.1 feet or Federal Geodetic Control
Committee third order elevation accuracy Specifications, OR 2) trigonometric leveling with elevation
differences determined in at least two directions for each point and with misclosure of the circuit
„� not to exceed 0.1 feet.
1-11.1(10) Station--Offset Topography
Elevations of the baseline and topographic points shall be determined by spirit leveling and shall
� satisfy Federal Geodetic Control Committee Specifications as to the turn points and shall not exceed
0.1 foot's error as to side shots.
1-11.1(11) As-Built Survey
""f All improvements required to be "as-built" (post construction survey) per City of Renton Codes,
TITLE 4 Building Regulations and TITLE 9 Public Ways and Property, must be located both horizontally
and vertically by a Radial survey or by a Station offset survey. The "as-built" survey must be based
,,,�, on the same base line or control survey used for the construction staking survey for the
improvements being "as-built". The "as-built" survey for all subsurface improvements should occur
prior to backfilling. Close cooperation between the installing Contractor and the "as-builting"
surveyor is therefore required.
w�
All "as-built" surveys shall satisfy the requirements of Section 1-11.1(1) herein, and shall be based
upon control or base line surveys made in conformance with these Specifications.
i'"" The field notes for"as-built" shall meet the requirements of Section 1-11.1(4) herein, and submitted
with stamped and signed "as-built" drawings which includes a statement certifying the accuracy of
the "as-built".
�
The drawing and electronic listing requirements set forth in Section 1-11.1(6) herein shall be
observed for all "as-built" surveys.
�rrr
97
�
09/08/2017 �
1-11.1(12) Monument Setting and Referencing �
All property or lot corners, as defined in 1-11.1(5), established or reestablished on a plat or other
recorded survey shall be referenced by a permanent marker at the corner point per 1-11.2(1). In
situations where such markers are impractical or in danger of being destroyed, e.g.,the front corners �
of lots, a witness marker shall be set. In most cases,this will be the extension of the lot line to a tack
in lead in the curb. The relationship between the witness monuments and their respective corners
shall be shown or described on the face of the plat or survey of record, e.g., "Tacks in lead on the
extension of the lot side lines have been set in the curbs on the extension of said line with the curb." �
In all other cases the corner shall meet the requirements of Section 1-11.2(1) herein.
All non-corner monuments, as defined in 1-11.1(5), shall meet the requirements of Section 1-11.2(2) �
herein. If the monument falls within a paved portion of a right-of-way or other area,the monument
shall be set below the ground surface and contained within a lidded case kept separate from the
monument and flush with the pavement surface, per Section 1-11.2(3).
�.
In the case of right-of-way centerline monuments all points of curvature (PC), points of tangency
(PT), street intersections, center points of cul-de-sacs shall be set. If the point of intersection (PI) for
the tangents of a curve fall within the paved portion of the right-of-way, a monument can be set at
the PI instead of the PC and PT of the curve. '�
For all non corner monuments set while under contract to the City of Renton or as part of a City of
Renton approved subdivision of property, a City of Renton Monument Card (furnished by the city) �
identifying the monument; point of intersection (PI), point of tangency (PT), point of curvature (PC),
one-sixteenth corner, Plat monument, street intersection, etc., complete with a description of the
monument, a minimum of two reference points and NAD 83/91 coordinates, and NAVD 88 elevation
shall be filled out and filed with the city. �
1-11.2 Materials
1-11.2(1) Property/Lot Corners '�
Corners per 1-11.1(5) shall be marked in a permanent manner such as 1/2 inch diameter rebar 24
inches in length, durable metal plugs or caps, tack in lead, etc., and permanently marked or tagged
with the surveyor's identification number. The specific nature of the marker used can be determined �
by the surveyor at the time of installation.
1-11.2(2) Monuments
Monuments per 1-11.1(5) shall meet the requirements as set forth in City of Renton Standard Plans �,
page H031 and permanently marked or tagged with the surveyor's identification number.
1-11.2(3) Monument Case and Cover
Materials shall meet the requirements of Section 9-22 and City of Renton Standard Plans page H031. �
2-01 CLEARING, GRUBBING,AND ROADSIDE CLEANUP
�
2-01.1 Description
Section 2-01.1 is supplemented as follows:
�******� �rt
The limits of clearing and grubbing (construction limits) shall be defined as being the construction
limit lines as shown in the Plans. Where, in the opinion of the Engineer, any trees abutting or
adjacent to the limits of clearing and grubbing are damaged and require removal, the Contractor :
shall remove such trees. Any trees flagged by the Engineer to remain within the clearing and '""�
grubbing limits shall be left undamaged by the Contractor's operations. Any flagged trees, which are
damaged, shall be replaced in kind at the Contractor's expense.
Existing landscaping outside the construction limits, including but not limited to, sod, rockeries,
�
beauty bark, decorative gravel or rock, bushes, and shrubbery shall be protected from damage.
��i
98
�
+� o9iosiao��
�
The property owners shall be responsible for removing and/or relocating irrigation equipment, trees,
shrubs, curbing, ornamental plants, and any other decorative landscaping materials within the
construction limits that they wish to save. The Contractor shall give property owners 10 days'
'� written notice prior to removing landscaping materials. All landscaping materials that remain in
the construction limits after that time period shall be removed and disposed of, by the Contractor, in
accordance with Section 2-01 of the Standard Specifications,these Special Provisions, and the Plans.
� The Contractor shall receive approval from the Engineer prior to removal.
2-01.2 Disposal of Usable Material and Debris
� Section 2-01.2 is supplemented as follows:
�******�
The Contractor shall dispose of all debris by Disposal Method No. 2—Waste Site.
� 2-01.5 Payment
Section 2-01.5 is supplemented as follows:
�******�
The lump sum price for "Clearing and Grubbing" shall be full compensation for all Work described
�` herein and shown in the Plans, including removing trees and shrubbery where shown in the Plans
and directed by the Engineer.
,rw� 2-02 REMOVAL OF STRUCTURE AND OBSTRUCTIONS
2-02.3(3) Removal of Pavement, Sidewalks, and Curbs
Section 2-02.3(3) is revised and supplemented as follows:
,� �******�
Item "1" is revised as follows:
In removing pavement, sidewalks, driveways, and curbs, the Contractor shall haul broken-up pieces
� to some off-project site.
The section is supplemented as follows:
When an area where pavement, sidewalk, or driveway has been removed is to be opened to traffic
rw before pavement patching has been completed, temporary mix asphalt concrete patch shall be
required. Temporary patching shall be placed to a minimum depth of 2 inches immediately after
backfilling and compaction are complete, and before the road is opened to traffic. MC cold mix or
MC hot mix shall be used at the discretion of the Engineer.
�
2-02.4 Measurement
Section 2-02.4 replaces the existing vacant section:
(******�
"" Sawcutting existing cement and asphalt concrete pavements shall be measured by the linear foot
along the sawcut, full depth. Wheel cutting of pavement will not be measured for separate
payment, but shall be included in other items of Work.
�.
2-02.5 Payment
Section 2-02.5 is supplemented by adding:
�******)
�""" "Saw Cutting", per lineal foot.
"Remove Sidewalk", per square yard.
"Remove Curb and Gutter", per lineal foot.
� "Cold Mix", per ton
"Remove Asphalt Concrete Pavement," per square yard.
"Remove Cement Concrete pavement," per square yard.
"Remove existing ," per
r.
All costs related to the removal and disposal of structures and obstructions including saw cutting,
excavation, backfilling, and temporary asphalt shall be considered incidental to and included in other
r
99
■rr
09/08/2017 �
items unless designated as specific bid items in the proposal. If pavements, sidewalks, or curbs lie �
within an excavation area and are not mentioned as separate pay items, their removal will be paid
for as part of the quantity removed in excavation. If they are mentioned as a separate item in the
proposal, they will be measured and paid for as provided under Section 2-02.5, and will not be
included in the quantity calculated for excavation. ,�
2-03 ROADWAY EXCAVATION AND EMBANKMENT
2-03.3 Construction Requirements �'
Section 2-03.3 is supplemented by adding the following:
�******�
Roadway excavation shall include the removal of all materials excavated from within the limits �
shown on the Plans. Suitable excavated material shall be used for embankments, while surplus
excavated material or unsuitable material shall be disposed of by the Contractor.
Earthwork quantities and changes will be computed, either manually or by means of electronic data �f
processing equipment, by use of the average end area method. Any changes to the proposed Work
as directed by the Engineer that would alter these quantities shall be calculated by the Engineer and
submitted to the Contractor for his review and verification.
�
Any excavation or embankment beyond the limits indicated in the Plans, unless ordered by the
Engineer, shall not be paid for. All Work and material required to return these areas to their original
conditions, as directed by the Engineer, shall be provided by the Contractor at his sole expense. �
All areas shall be excavated, filled, and/or backfilled as necessary to comply with the grades shown
on the Plans. In filled and backfilled areas, fine grading shall begin during the placement and the
compaction of the final layer. In cut sections, fine grading shall begin within the final six(6) inches of ,r�Y
cut. Final grading shall produce a surface, which is smooth and even, without abrupt changes in
grade.
Excavation for curbs and gutters shall be accomplished by cutting accurately to the cross sections, �`
grades and elevations shown. Care shall be taken not to excavate below the specified grades. The
Contractor shall maintain all excavations free from detrimental quantities of leaves, brush, sticks,
trash, and other debris until final acceptance of the Work. �
Following removal of topsoil or excavation to grade, and before placement of fills or base course,the
subgrade under the roadway shall be proof-rolled to identify any soft or loose areas which may
warrant additional compaction or excavation and replacement. �
The Contractor shall provide temporary drainage or protection to keep the subgrade free from
standing water. `
�,
Acceptable excavated native soils shall be used for fill in the area requiring fills. Care shall be taken
to place excavated material at the optimum moisture content to achieve the specified compaction.
Any native material used for fill shall be free of organics and debris, and have a maximum particle �
size of 6 inches.
It shall be the responsibility of the Contractor to prevent the native materials from becoming
saturated with water. The measures may include sloping to drain, compacting the native materials, �
and diverting runoff away from the materials. If the Contractor fails to take such preventative
measures, any costs or delay related to drying the materials shall be at his own expense.
If the native materials become saturated, it shall be the responsibility of the Contractor to dry the �
materials, to the optimum moisture content. If sufficient acceptable native soils are not available to
complete construction of the roadway embankment,Gravel Borrow shall be used.
If subgrade trimmer is not required on the project, all portions of Section 2-03 shall apply as though �
a subgrade trimmer were specified.
�
100
�
++� o9iosi2o��
�tr
If sufficient acceptable native soils, as determined by the Engineer, are not available to complete
construction of the roadway embankment, Gravel Borrow meeting the requirements of Section 9-
03.14 of the Standard Specifications, shall be used.
�
2-03.4 Measurement
Section 2-03.4 is supplemented by adding the following:
�******�
"�` At the discretion of the Engineer, roadway excavation, borrow excavation, and unsuitable foundation
excavation - by the cubic yard (adjusted for swell) may be measured by truck in the hauling vehicle at
the point of loading. The Contractor shall provide truck tickets for each load removed. Each ticket
,,,,, shall have the truck number,time and date, and be approved by the Engineer.
2-03.5 Payment
Section 2-03.5 is revised as follows:
,r,r �******�
Payment for embankment compaction will not be made as a separate item. All costs for
embankment compaction shall be included in other bid items involved. Payment will be made for
the following bid items when they are included in the proposal:
� "Roadway Excavation Including Haul;' per cubic yard
"Removal and Replacement of Unsuitable Foundation Material;' per ton
"Gravel Borrow Including Haul;' per ton
�
"Roadway Excavation Including Haul" shall be considered incidental and part of the bid item(s)
provided for the installation of the utility mains and appurtenances. When the Engineer orders
excavation below subgrade, then payment will be in accordance with the item "Removal and
� Replacement of Unsuitable Foundation Material". In this case, all items of Work other than roadway
excavation shall be paid at unit contract prices.
The unit contract price per cubic yard for "Roadway Excavation Including Haul" shall be full pay for
'�' excavating, loading, placing, or otherwise disposing of the material.
The unit contract price per ton for "Removal and Replacement of Unsuitable Foundation Material"
,�,�„ shall be full pay for excavating, loading, and disposing of the material.
Payment for embankment compaction will not be made as a separate item. All costs for
embankment compaction shall be included in other bid items involved.
rr
2-04 HAUL
�" 2-04.5 Payment
Section 2-04.5 is revised and supplemented as follows:
�******�
,,,,,,, All costs for the hauling of material to, from, or on the job site shall be considered incidental to and
included in the unit price of other units of Work.
2-06 SUBGRADE PREPARATION
�
2-06.5 Measurement and Payment
� Section 2-06.5 is supplemented by adding the following:
�******�
Subgrade preparation and maintenance including watering shall be considered as incidental to the
construction and all costs thereof shall be included in the appropriate unit or lump sum contract bid
� prices.
�r
101
�
09/08/2017 �
2-09 STRUCTURE EXCAVATION �
2-09.1 Description
Section 2-09.1 is supplemented by adding the following: �i
�******�
This Work also includes the excavation, haul, and disposal of all unsuitable materials such as peat,
muck,swampy or unsuitable materials, including buried logs and stumps.
�
2-09.3(1)D Disposal of Excavated Material
Section 2-09.3(1)D is revised as follows:
�******� �
The second paragraph is replaced with:
All costs for disposing of excavated material within or external to the project limits shall be included
in the unit contract price for structure excavation, Class A or B.
�
The third paragraph is replaced with:
If the Contract includes structure excavation, Class A or B, including haul,the unit contract price shall
include all costs for loading and hauling the material the full required distance, otherwise all such
disposal costs shall be considered incidental to the Work. "'�'�
2-09.4 Measurement
Section 2-09.4 is revised and supplemented as follows: �
�******�...
Gravel backfill. Gravel backfill, except when used as bedding for culvert, storm sewer, sanitary sewer,
manholes, and catch basins, will be measured by the cubic yard in place determined by the neat
lines required by the Plans or by the ton as measured in conformance with Section 1-09.2. riit
2-09.5 Payment '
Section 2-09.5 is revised and supplemented as follows: �
�******�
Payment will be made for the following bid items when they are included in the proposal:
"Structure Excavation Class A", per cubic yard. �
"Structure Excavation Class B", per cubic yard.
"Structure Excavation Class A Incl. Haul", per cubic yard.
"Structure Excavation Class B Incl. Haul", per cubic yard.
�
Payment for reconstruction of surfacing and paving, within.the limits of structure excavation, will be
at the applicable unit prices for the items involved.
If the Engineer orders the Contractor to excavate below the elevations shown in the Plans, the unit �
contract price per cubic yard for "Structure Excavation Class A or B" will apply. But if the Contractor
excavates deeper than the Plans or the Engineer requires, the Contracting Agency will not pay for
material removed from below the required elevations. In this case, the Contractor, at no expense to �
the Contracting Agency, shall replace such material with concrete or other material the Engineer
approves.The unit contract price per cubic yard for the bid items listed as 1 through 4 above shall be
full pay for all labor, materials, tools, equipment, and pumping, or shall be included in the unit bid
price of other items of Work if "Structure Excavation" or "Structure Excavation Incl Haul" are not �
listed as pay items in the Contract.
"Shoring or Extra Excavation Class B", per square foot.
The unit contract price per square foot shall be full pay for all excavation, backfill, compaction, and �
other Work required when extra excavation is used in lieu of constructing shoring. If select backfill
material is required for backfilling within the limits of the structure excavation, it shall also be '
required as backfill material for the extra excavation at the Contractor's expense. Any excavation or �
backfill material being paid by unit price shall be calculated by the Engineer only for the neat line
measurement of the excavation and shall not include the extra excavation beyond the neat line.
�
102
�
� o9ioai2o��
�
If there is no bid item for shoring or extra excavation Class B on a square foot basis and the nature of
the excavation is such that shoring or extra excavation is required as determined by the Engineer,
then shoring or extra excavation shall be considered incidental to the Work involved and no further
� compensation shall be made.
"Gravel Backfill (Kind)for(Type of Excavation)", per cubic yard or per ton.
� "Controlled Density Fill", per cubic yard.
When gravel backfill is paid by the ton, the Contractor shall take care to assure to the satisfaction of
the Engineer that such per ton backfill is only being used for the specified purpose and not for
„� purposes where backfill is incidental or being paid by cubic yard. Evidence that per ton gravel
backfill is not being used for its designated purpose shall be grounds for the Engineer to deny
payment for such load tickets.
� 5-04 ASPHALT CONCRETE PAVEMENT
5-04.2 Materials
� Section 5-04.2 is revised and supplemented as follows:
�******�
Delete the second and fourth paragraphs of this section.
�
The base course shall be untreated crushed surfacing.
Asphalt concrete shall meet the grading requirements for the specified mix.
Temporary patch shall be cold or hot mix.
'� 5-04.3 Construction Requirements
Section 5-04.3 is supplemented as follows:
�******�
�w
Shoulder Restoration
The existing surfacing of disturbed asphalt shoulders shall be removed to a minimum depth of 6
„� inches below original street grade to provide for placement of the new subgrade and paving. The
subgrade shall be constructed of 1% inch minus crushed surfacing base course placed to a
compacted thickness of 2%Z inches, followed by 5/8-inch minus crushed surfacing top course placed
,,,� to a compacted thickness of 1% inches. HMA Class%"shall then be placed and compacted in 2-inch
lifts up to a maximum 4-inch thickness to match existing pavement thickness. Minimum thickness
shall be 2 inches. The shoulder shall be replaced to the existing fog line in areas where the existing
„�, asphalt shoulder is seriously disturbed, or at the Engineer's discretion.
Asphalt Concrete Patching and Overlay
�, The Contractor shall maintain temporary hot mix asphalt patches daily during construction to the
satisfaction of the governing road agency and the Engineer until said patch is replaced with a
permanent hot patch. The permanent hot mix asphalt patch shall be placed and sealed with paving
;�,, grade asphalt within 30 calendar days.
Private Driveways
,,,, Where a private driveway is damaged by either construction of the project or by the Contractor's use
and activity on the road, it shall be repaired to the satisfaction of the property owner,the City, and
to its original condition or better. Damaged asphalt-concrete driveways shall be replaced by saw
�,; cutting to a straight line and replacing a full width section. Damaged cement-concrete driveways
shall be removed to the nearest joint(real or dummy)and replaced with a full width section.
Damaged gravel driveways shall have crushed surfacing placed and compacted to a minimum depth
r
103
,r.
o9iosizo�� �
of 4 inches. �
Curbs,Gutters and Sidewalks
Existing curbs, gutters, and sidewalks damaged by construction of the project or the Contractor's use ,�
and activity, shall be repaired to the satisfaction of the property owner, the City, and to its original
condition or better.
�
5-04.3(5) Conditioning the Existing Surface
Section 5-04.3(S) is supplemented as follows
(*****� �
The Contractor shall maintain existing surface contour during patching, unless otherwise instructed
by the City Engineer or Inspector.
5-04.3(5)A Preparation of Existing Surface �
Section 5-04.3(5)A is supplemented as follows:
�*****�
The Contractor shall provide his own mechanical sweeping equipment. The sweeper will be on the �
project prior to the start of paving,to insure the streets to be paved are clean before the tack coat is
applied. The sweeper will keep the streets clean ahead of the paving machine and clean the streets
behind the empty trucks that have dumped their loads into the paving machine. The sweeper must "'�
sweep all streets made dirty by the Contractor's equipment. If the paving machine is"walked"from
one site to another,the sweeper must sweep up behind paving machine. The sweeper shall not ;
leave the overlay site until given permission by the City's inspector. �
All utilities shall be painted with a biodegradable"soap"to prevent the tack and ACP from sticking to ;
the lids. Diesel will not be used. After the application of soap, catch basins must be covered to �
prevent tack and ACP from getting into catch basins.
Preparation of existing surface shall be done as outlined in this Section and a tack coat shall be �
applied at the rate of 0.02 to 0.08 gallons per square yard. Payment for preparation of the surface
and application of the tack coat shall be considered incidental to the paving and no separate
payment shall be made. �
The Contractor shall locate all utilities for access immediately after any paving and mark the location
by means of painting a circle around the location and scooping a portion of asphalt 4" - 6" in �
diameter and the depth of the overlay from the center of the utility location.
The Contractor shall locate and completely expose gas and water valves for access immediately after �
final rolling.
The day following the start of application of ACP, utility adjustments must begin. The Contractor �
shall have an adjustment crew adjusting utilities every workable working day until adjustments are
complete.
�t
During the adjustment of any utility,existing concrete bricks or grouting material that has been
broken or cracked shall be removed and replaced at the Contractor's expense.
�
Utility adjustments must be completed within 15 working days after overlay is complete, and within
�
104
�
� 09/08/2017
�rr the specified working days.
Payment for utility adjustments includes all labor, materials,tools, and equipment necessary to
rrr complete the adjustments and is incidental to pay items for Asphalt Patch and Asphalt Overlay.
5-04.3(7)A Mix Design
,;��, Item 2 is deleted and replaced with:
�*****�
2. Nonstatistical HMA Evaluation. The Contractor shall submit a certification that the mix
,,,,;� design submitted meets the requirements of Sections 9-03.8(2) and 9-03.8(6). The
Contractor must submit the mix design using DOT Form 350-042 EF. Verification of the mix
design by the Contracting Agency is not needed. The Project Engineer will determine anti-
,�, strip requirements for the HMA.
The mix design will be the initial job mix formula (JMF)for the class of mix. Any additional
�, adjustments to the JMF will require the approval of the Project Engineer and may be made
per Section 9-03.8(7).
5-04.3(8)A Acceptance Sampling and Testing—HMA Mixture
� Item 1 is deleted and replaced with:
�*****�
1. General. Acceptance of HMA shall be as provided under nonstatistical or commercial
� evaluation.
Nonstatistical evaluation will be used for the acceptance of HMA.
�
Commercial evaluation will be used for Commercial HMA, and for other classes of HMA in
the following applications: sidewalks, road approaches, ditches, slopes, paths,trails, gores,
`�" relevel and avement re air. Other nonstructural a lications as a roved b the Pro ect
p , p p pP � pp Y 1
Engineer. Sampling and testing of HMA accepted by commercial evaluation will be at the
option of the Engineer. The proposal quantity of HMA that is accepted by commercial
�" evaluation will be excluded from the quantities used in the determination of nonstatistical
evaluation.
"�` Item 7 is deleted.
5-04.3(10)B Control
� Replace Section 5-04.3(10)B with the following:
�*****�
,;�,r Sub-base shall be compacted to 95%of the maximum density by the Modified Proctor Test Method,
ASTM D 1557. Compact asphalt concrete patch and paving to 95%of maximum compaction.
5-04.5 Payment
�
5-04.5(1)A Price Adjustments for Quality of HMA Mixture
Section is deleted and replaced with:
�*****�
rir
Statistical analysis of quality of gradation and asphalt content will be performed based on
Section 1-06.2 using the following price adjustment factors:
�
]OS
r
09/08/2017 �
Table of Price Adjustment Factors ,r�i
Constituent Factor"f"
All aggregate passing: 1%", 1",3/", %:", 3/8" and No.4 sieves 2
All aggregate passing No. 8, No 16, No. 30, No. 50, No. 100 3 �'
All aggregate passing No. 200 sieve 20
Asphalt binder 52 �
A pay factor will be calculated for sieves listed in Section 9-03.8(7)for the class of HMA and for the
asphalt binder. �
1. Nonstatistical Evaluation. Each lot of HMA produced under Nonstatistical Evaluation and
having all constituents falling within the tolerance limits of the job mix formula shall be "�'
accepted at the unit contract price with no further evaluation. When one or more
constituents fall outside the nonstatistical acceptance tolerance limits in Section 9-03.8(7),
the lot shall be evaluated in accordance with Section 1-06.2 to determine the appropriate "'�
CPF. The nonstatistical tolerance limits will be used in the calculation of the CPF and the
maximum CPF shall be 1.00. When less than three sublots exist, backup samples of the
existing sublots or samples from the street shall be tested to provide a minimum of three �
sets of results for evaluation.
2. Commercial Evaluation. If sampled and tested, HMA produced under Commercial Evaluation �"r'
and having all constituents falling within the tolerance limits of the job mix formula shall be
accepted at the unit contract price with no further evaluation. When one or more
constituents fall outside the commercial acceptance tolerance limits in Section 9-03.8(7),the �
lot shall be evaluated to determine the appropriate CPF. The commercial tolerance limits
will be used in the calculation of the CPF and the maximum CPF shall be 1.00. When less
than three sublots exist, backup samples of the existing sublots or samples from the street '�
shall be tested to provide a minimum of three sets of results for evaluation.
For each lot of HMA produced under Nonstatistical or Commercial Evaluation when the �
calculated CPF is less than 1.00, a Nonconforming Mix factor (NCFM) will be determined.
THE NCFM equals the algebraic difference of CPF minus 1.00 multiplied by 60 percent. The
Job Mix Compliance Price Adjustment will be calculated as the product of the NCMF, the �
quantity of HMA in the lot in tons, and the unit contract price per ton of the mix.
If a constituent is not measured in accordance with these Specifications, its individual pay factor will
be considered 1.00 in calculating the composite pay factor. '�
5-04.5(1)B Price Adjustments for Quality of HMA Compaction
Section is deleted and replaced with: �
�*****�
The maximum CPF of a compaction lot is 1.00
�
For each compaction lot of HMA when the CPF is less than 1.00, a Nonconforming Compaction
Factor(NCCF)will be determined. THE NCCF equals the algebraic difference of CPF minus 1.00
multiplied by 40 percent. The Compaction Price Adjustment will be calculated as the product of the �
NCFF,the quantity of HMA in the lot in tons and the unit contract price per ton of the mix.
�
106
�
t�Y 09/08/2017
�
5-06 TEMPORARY RESTORATION IN PAVEMENT AREA
Section 5-06 is new Section with subsections: v
�******�
wr
5-06.1 Description
�
Pavement areas that have been removed by construction activities must be restored by the
Contractor prior to the end of each working period, prior to use by vehicular traffic. Within paved
streets,the Contractor may use temporary pavement to allow vehicular traffic to travel over the
�
construction areas. Temporary pavement shall be placed around trench plates or others devices
used to cover construction activities in a manner that provides a smooth and safe transition between
surfaces.
"�' S-06.2 Materials
The asphalt pavement for temporary patches shall be 2"of a hot mix or cold mix asphalt
composition determined by the Contractor to provide a product suitable for the intended
'� application. The Contractor shall not use materials that are a safety or health hazard.
Temporary pavement material that does not form a consolidated surface after compaction shall be
� considered unsuitable and shall be removed from the site. Unsuitable temporary pavement shall be
disposed of offsite.
� 5-06.3 Construction Requirements
The Contractor shall maintain temporary hot mix asphalt patches daily during to the satisfaction of
the governing road agency and the Engineer until said patch is replaced with permanent hot patch.
� The completed pavement shall be free from ridges, ruts, bumps, depressions, objectionable marks,
or other irregularities. The permanent hot mix asphalt patch shall be placed and sealed with a
paving asphalt within 30 calendar days.
�
The Contractor shall immediately repair, patch,or remove any temporary pavement that does not
provide a flat transition between existing pavement areas.
�
All temporary asphalt pavement shall be removed from the site by the end of the project and shall
not be used as permanent asphalt pavement or subgrade material.
.rr
7-01 DRAINS
"� 7-01.2 Materials
The second paragraph of Section 7-01.2 is revised as follows:
�******�
�r Drain pipes may be concrete, zinc coated (galvanized) corrugated iron with Asphalt Treatment I,
aluminum coated (aluminized) corrugated iron with Asphalt Treatment I, zinc coated (galvanized)
steel with Asphalt Treatment I, corrugated aluminum alloy, polyvinyl chloride (PVC), or corrugated
polyethylene (PE) at the option of the Contractor unless the Plans specify the type to be used.
.r
7-01.3 Construction Requirements
Section 7-01.3 is revised as follows:
�
�******)
The second paragraph is revised as follows:
PVC drainpipe shall be jointed with a bell and spigot joint using a flexible elastomeric seal as
�r
107
�r
09/08/2017 �
described in Section 9-04.8.The bell shall be laid upstream. PE or ABS drainpipe shall be jointed with �
snap-on, screw-on, or wraparound coupling bands as recommended by the manufacturer of the
tubing.
The sixth paragraph is revised as follows: +�
PVC under drain pipe shall be jointed using either the flexible elastomeric seal as described in
Section 9-04.8 or solvent cement as described in Section 9-04.9, at the option of the Contractor
unless otherwise specified in the Plans. The bell shall be laid upstream. PE or ABS drainage tubing
under drain pipe shall be jointed with snap-on, screw-on, or wraparound coupling bands, as "'�'
recommended by the manufacturer of the tubing.
7-01.4 Measurement „�
Section 7-01.4 is supplemented adding the following:
(******�
When the Contract does not include "Structure Excavation Class B" or "Structure Excavation Class B
Including Haul" as a pay item all costs associated with these items shall be included in other contract +r�
pay items.
7-02 CULVERTS
�
7-02.2 Materials
The second paragraph of Section 7-02.2 is revised and supplemented as follows: „�
�******�
Where steel or aluminum are referred to in this section in regard to a kind of culvert pipe, pipe arch,
or end sections, it shall be understood that steel is zinc coated (galvanized) with Asphalt Treatment I
or aluminum coated (aluminized) corrugated iron or steel, and aluminum is corrugated aluminum �
alloy as specified in Sections 9-05.4 and 9-05.5. Where plain or reinforced concrete, steel, or
aluminum are referred to in Section 7-02 it shall be understood that reference is also made to PVC.
7-04 STORM SEWERS �
7-04.2 Materials '
�
The first paragraph of Section 7-04.2 is revised as follows:
�******�
Unless a pipe material is specifically called out on the Plans, materials shall meet the following
�
requirements.
Size Pipe Material Allowed Specification
�
6-12" Polypropylene Storm Sewer Pipe 9-05.24(2)
Ductile Iron Pipe 9-OS-13
�
Corrugated Polyethylene Storm Sewer Pipe 9-05.20
(CPEP)
�
Where bends are specifically called out on the plans,they shall be of the same material and
manufacturer as the main pipe and meet the manufacturer's recommendations.
wi
The second paragraph of Section 7-04.2 is supplemented as follows:
�******�
The Contractor shall require pipe suppliers to furnish certificates signed by their authorized �
representative, stating the specifications to which the materials or products were manufactured.
The Contractor shall provide 2 copies of these certifications to the Engineer for approval.
�
108
wrr
� 09/08/2017
,,,,� Certificates showing nonconformance with the Contract shall be sufficient evidence for rejection.
Approval of certificates shall be considered only as tentative acceptance of the materials and
products, and such action by Engineer will not relieve Contractor of his/her responsibility to perform
field tests and to replace or repair faulty materials, equipment, and/or workmanship and
'�` Contractor's own expense.
�' Section 7-04.2 is supplemented with the following:
�******�
Dense foam shall meet 9-05.52 of these Special Provisions.
� Direct Pipe Tee Connections:
Direct pipe tee connections for use in gravity-flow sewer and storm drainage direct connections to
pipe shall be Inserta Tee service connections, as manufactured by Inserta Tee and shall meet ASTM
'� F2946 and consist of a PVC hub, rubber sleeve, and stainless steel band. Connection shall be a
compression fit into the cored wall of a mainline pipe. Hub shall be made from heavy-duty PVC
material. Stainless steel clamping assembly shall be of SS#301 for the band and housing and SS#305
"�" for screws. Rubber sleeve and gasket, when applicable, shall meet the requirements of ASTM F477.
Gaskets shall be installed by the manufacturer. A water-based solution provided by the
manufacturer shall be used during assembly. Inserta Tee product shall provide a water connection
`'� according to the requirements of ASTM D3212.
Section 7-04.2(2)Temporary Stormwater Diversion
""� Section 7-04.2(2) is an added new section
�******�
It shall be the Contractor's responsibility to maintain operation of the existing storm sewer system
"�' throughout the duration of the project without any disruption of service until the new storm drain
has been accepted by the City to receive stormwater flows, and connections are made between the
existing and new storm based on scheduling approved by the Engineer.
�
A temporary stormwater diversion shall be capable of bypassing at least the 2-year peak flow during
construction.The 2-year peak flow at various locations in the project area is provided below:
� • Intersection of S 9th St and Renton Ave S: 2.1 cfs
• Intersection of S 7th St and Cedar Ave S: 1.2 cfs
• Renton Ave S, north of Beacon Way S: 4.4 cfs
�r
The Contractor shall submit proposed methods for providing the diversions to the Engineer for
approval prior to construction. The diversions shall have the least impact on property owners and
�'�" traffic flow through the site. The diversions shall be installed, operated, and maintained only when
needed where the existing storm drain system must be demolished to allow construction of the new
system. Where shown on the Plans, Contractor shall time work of bypasses during period of
"�` anticipated no or little rain.
If bypass pumping is provided, it shall be scheduled for continuous operation with backup
"� equipment available at all times for periods of maintenance and refueling or failure of the primary
bypass pump(s)or diversion system.
�' The Contractor's bypass operation shall be sized to handle, at a minimum, the flow rates specified
above, or can be reduced to a size determined by the Contractor if the temporary bypass can be
�
]09
r
09/08/2017 �
timed to coincide with a period of little to no rain. The Contractor shall submit a Temporary �
Stormwater Diversion Plan in accordance with Section 1-05. The Contractor's plan shall be reviewed
by the City before the plan is implemented. The review of the flow diversion plan shall, as well as
the Contractor's proposed size of the bypass, in no way relieve the Contractor of his responsibility to �,
provide a bypass system that conveys encountered flows without property damage or damage to
the project or construction area. As risk associated with sizing the bypass and impacts to
construction is born by the Contractor. �;
7-04.3(1) Cleaning and Testing
Section 7-04.3(1) is supplemented with the following: �
�******)
Before testing begins and in adequate time to obtain approval through submittal process, prepare
and submit test plan for approval by Engineer. Include testing procedures, methods, equipment, and �
tentative schedule. Obtain advance written approval for any deviations from Drawings and
Specifications.
Repair, correct, and retest sections of pipe which fail to meet specified requirements when tested. „�
Perform testing as work progresses. Schedule testing so that no more than 1000 linear feet of
installed pipeline remains untested at one time.
Perform testing under observation of Engineer or Inspector. ,�
Schedule testing during no rain. Plug the lower end of the pipe if needed to test pipe.
All pipe larger than 30-inch diameter shall have joints individually tested for Joint Tightness. Prior to
final backfill, all joints shall be individually tested using low-pressure air per ASTM C1103. For the ,,,�
installation of any flexible pipe larger than 30-inches in diameter,the Contractor shall retain the
services of a pipe manufacturer representative, knowledgeable in the installation methods and
practices for the specific pipe product used on this project, as well as on the installation practices for �
flexible pipelines in general.The manufacturer's representative shall be present full time on site
during the construction of the first 300 feet of pipe installation, and part-time,as required,
thereafter until the entire pipeline installation is complete.The manufacturer's representative shall ,r„�
observe pipe foundation, pipe installation, placement and compaction of pipe zone bedding and
backfill, and testing procedures.The manufacturer's representative shall notify Engineer and
Contractor of any non-conforming installation, identifying the manufacturer recommended �
corrective action(s),within 24 hours of such occurrence.All flexible pipe shall be tested for
maximum pipe deflection by pulling a rigid mandrel through the entire(i.e., 100%)flexible pipe
length installed. Maximum deflection shall not exceed 5%. Mandrel testing shall conform to ASTM „�,
D3034, and be performed no sooner than 30 days after backfilling and prior to final acceptance
testing of the segment. Submit test results to the Engineer.
1. Rigid mandrel shall have outside diameter (O.D.) equal to 95 percent of inside diameter �,
(I.D.) of pipe. Inside diameter of pipe, for purpose of determining outside diameter of
mandrel, shall be average outside diameter minus two minimum wall thicknesses for O.D.
controlled pipe and average inside diameter for I.D. controlled pipe, dimensions shall be per ,,,�
appropriate standard. Statistical or other "tolerance packages" shall not be considered in
mandrel sizing.
2. Rigid mandrel shall be constructed of inetal or rigid plastic material that can withstand 200 rrr�
psi without being deformed. Mandrel shall have nine or more "runners" or "legs" as long as
total number of legs is odd number. Barrel section of mandrel shall have length of at least .
75 percent of inside diameter of pipe. Rigid mandrel shall not have adjustable or collapsible �rr
�
110
�
w� 09/08/2017
w�, legs which would allow reduction in mandrel diameter during testing. Provide and use
proving ring for modifying each size mandrel.
3. Furnish "proving ring" with each mandrel. Fabricate ring of 1/2-inch-thick, 3-inch-wide bar
�' steel to diameter 0.02 inches larger than approved mandrel diameter.
4. If a rigid mandrel is not available, the Contractor may substitute a round steel bar meeting
#3 above.
�
"Testing Storm Sewer Pipe", per linear foot shall be incidental to and included in storm sewer pipe
bid items.
rr�
7-04.3(1)G Abandon Existing Storm Sewer Pipes
Section 7-04.3(1)G is a new section:
�******�
�
Where it is shown on the plans that existing storm sewer pipe is to be abandoned by filling with
grout, all abandonment of storm drain lines shall conform to Section 7-17.3(2)I.
�
7-04.3(2) CCTV Inspection
Section 7-04.3(2)is a new added section:
r �******�
All storm drain main lines constructed as part of this project shall be inspected by the use of closed-
circuit television (CCN) before substantial completion. The costs incurred in making the inspection
shall be paid for under"CCTV Inspection".
� All CCTV inspections for storm drain lines shall conform to Section 7-17.3(2)H.
7-04.3(3) Direct Pipe Connections
�' Section 7-04.3(4) is a new added section as follows:
�******�
Field Pipe and Joint Performance: To assure water tightness,field performance verification may be
� accomplished by testing in accordance with ASTM F2487,ASTM F1417 or ASTM C1103.Appropriate
safety precautions must be used when field-testing any pipe material. Contact the manufacturer for
recommended leakage rates.
`� Installation: Installation shall be accordance with the manufacturer's recommended installation
guidelines. Backfill around the Inserta Tee service connection shall be, at a minimum, of the same
material type and compaction level as specified for the mainline pipe installation.
�
7-05 MANHOLES, INLETS, AND CATCH BASINS
"�' 7-05.3 Construction Requirements
Section 7-05.3 is supplemented by adding the following:
�******�
� All manholes shall have eccentric cones and shall have ladders.
Connection to manholes or catch basins for storm sewer pipe less than 24-inch shall be "Kor-n-Seal"
boot or approved equal.
�' Sanitary sewer pipe to sanitary sewer manhole connections shall be "Kor-n-Seal" boot or approved
equal.
""�" 7-05.3(1) Adjusting Manholes and Catch Basins to Grade
Section 7-05.3(1) is replaced with:
r�r
111
�r
09/08/2017 �
�******� �M
Where shown in the Plans or where directed by the Engineer,the existing manholes,catch basins, or
inlets shall be adjusted to the grade as staked or otherwise designated by the Engineer.
The existing cast iron ring and cover on manholes and the catch basin frame and grate shall first be �
removed and thoroughly cleaned for reinstalling at the new elevation. From that point,the existing
structure shall be raised or lowered to the required elevation.
The Contractor shall construct manholes so as to provide adjustment space for setting cover and ,�
casting to a finished grade as shown on the Construction Plans. Manhole ring and covers shall be
adjusted to the finished elevations per standard detail 106 prior to final acceptance of the Work.
Manholes in unimproved areas shall be adjusted to 6" above grade. �
In unpaved streets: manholes, catch basins, and similar structures in areas to be surfaced with
crushed rock or gravel shall be constructed to a point approximately eight inches below the
subgrade and covered with a temporary wood cover. Existing manholes shall be cut off and covered �
in a similar manner. The Contractor shall carefully reference each manhole so that they may be
easily found upon completion of the street Work. After placing the gravel or crushed stone
surfacing,the manholes and manhole castings shall be constructed to the finished grade of the �
roadway surface. Excavation necessary for bringing manholes to grade shall center about the
manhole and be held to the minimum area necessary. At the completion of the manhole
adjustment,the void around the manhole shall be backfilled with materials which result in the ,�
section required on the typical roadway section, and be thoroughly compacted.
In cement concrete pavement: manholes, catch basins, and similar structures shall be constructed
and adjusted in the same manner as outlined above except that the final adjustment shall be made ,,,�
and cast iron frame be set after forms have been placed and checked. In placing the concrete
pavement, extreme care shall be taken not to alter the position of the casting in any way.
In asphalt concrete pavement: manholes shall not be adjusted until the pavement is completed, at ,�
which time the center of each manhole shall be carefully relocated from references previously
established by the Contractor.The manhole shall then be brought to proper grade utilizing the same
methods of construction as for the manhole itself. The cast iron frame shall be placed on the �
concrete grade rings and mortar. The complete patch shall match the existing paved surface for
texture, density, and uniformity of grade.The joint between the patch and the existing pavement
shall then be carefully painted with hot asphalt cement or asphalt emulsion and shall be ,�
immediately covered with dry paving sand before the asphalt cement solidifies.
Adjustment of inlets:The final alignment and grade of cast iron frames for new and old inlets to be
adjusted to grade will be established from the forms or adjacent pavement surfaces.The final �
adjustment of the top of the inlet will be performed in similar manner to the above for manholes.
On asphalt concrete paving projects using curb and gutter section, that portion of the cast iron
frame not embedded in the gutter section shall be solidly embedded in asphalt also. The concrete ,�
shall extend a minimum of six inches beyond the edge of the casting and shall be left 2 inches below
the top of the frame so that the wearing course of asphalt concrete pavement will butt the cast iron
frame.The existing concrete pavement and edge of the casting shall be painted with hot asphalt �
cement.Adjustments in the inlet structure shall be constructed in the same manner and of the same
material as that required for new inlets.The inside of the inlets shall be mortared.
Monuments and cast iron frame and cover: monuments and monument castings shall be adjusted to �
grade in the same manner as for manholes.
Valve box castings: adjustments of valve box castings shall be made in the same manner as for
manholes. r;�;
�
112
�i
� 09/08/2017
w�. 7-05.3(2) Abandon Existing Manholes
Section 7-05.3(2) is revised as follows:
�******�
.�r Where it is required that an existing manhole be abandoned,the structure shall be broken down to
a depth of at least 4 feet below the revised surface elevation, all connections plugged, the manhole
base shall be fractured to prevent standing water, and the manhole filled with sand and compacted
r�r to 90 percent density as specified in Section 2-03.3(14)C. Debris resulting from breaking the upper
part of the manhole may be mixed with the sand subject to the approval of the Engineer.The ring
and cover shall be salvaged and all other surplus material disposed of.
�
7-05.3(3) Connections to Existing Manholes
Section 7-05.3(3) is supplemented by adding the following:
,�, �******�
Where shown on the Plans, new drain pipes shall be connected to existing line,catch basin, curb
inlets and/or manholes. The Contractor shall be required to core drill into the structure, shape the
+� new pipe to fit and re-grout the opening in a workmanlike manner. Where directed by the Engineer
or where shown on the Plans, additional structure channeling will be required.
Connections to existing sanitary sewer manholes shall be core drilled. Couplings shall be equal to
+�r► "Kor-n-Seal" boots. Existing sanitary sewer manholes shall be cleaned, repaired, and re-channeled
as necessary to match the new pipe configuration and as shown on the Construction Plans.
A"connection to existing" item will be allowed at any connection of a new line to an existing
+� structure. No "connection to existing"will be accepted at the location of new installation, relocation
and adjustment of line manholes, catch basins, or curb inlets.
Any damage to existing pipe or structure that is to remain in place resulting from the Contractor's
� operations shall be repaired or replaced at her/his own expense.
The unit bid price per each shall be full compensation for all labor, materials and equipment
required.
�
7-05.3(5) Manhole Coatings
Section 7-05.3(5) is an added new section:
�w �******�
All new sanitary sewer manholes shall be coated as specified below. The following coating system
Specifications shall be used for coating(sealing) all interior concrete surfaces of sanitary sewer
,,,, manholes.
Coating Material: High Solids Urethane
Surfaces: Concrete
,�, Surface Preparation: In accordance with SSPC SP-7
(Sweep of brush off blast)
Application: Shop/Field
�„ The drying time between coats shall not exceed 24 hours in any case
System Thickness: 6.0 mils dry film
Coatings: Primer: One coat of Wasser MC-Aroshield (2.0 mils DFT)
;,�, Finish:Two or more coats of Wasser MC-Aroshield (min. 4.0 mils DFT)
Color: White
rr
7-06 TRENCH DRAINS (NEW SECTION)
Section 7-06 is a new section.
�rw
113
rr
09/08/2017 �
�******� �II�
7-06.1 Description
This Work consists of the construction of new trench drain in accordance with the plans and +rw
specifications.
7-06.2 Materials
�
Trench drain shall be Polydrain PDX 15"wide,or acceptable equal. Trench drain and supporting
concrete shall be designed for HS20 loading. Grate shall be either Model#603 or#606 as
determined by the City. �
Submittals:
A. Shop Drawings: Show a schematic plan of the total drainage system including irr►
fabrication details. Shop drawing shall indicate the number and type of each pre-
sloped channels and non pre-sloped channels.
B. Product Data: Manufacturer's catalog sheets, specifications, and installation '�
instructions for each item specified.
C. Samples: Section of trench drain and grate (minimum 6-inch length)
D. Product Data: „�
1. Concrete Design Mix: Submit proposed concrete design mix together with
name and location of batching plant at least 28 days prior to the start of
concrete work.
Portland Cement: Brand and Manufacturer's name. �
3. Air-entraining Admixture: Brand and manufacturer's name.
4. Water-reducing or High Range Water-reducing Admixture: Brand and
manufacturer's name. ``
5. Curing and Anti-Spalling Compound: Manufacturer's specifications and �'�"
application instructions.
7-06.3 Construction Requirements ,,,�,;
Cement concrete shall be constructed with air entrained concrete Class 4000 confirming to the
requirements of Section 6-02. Applicable requirements for concrete curbs and gutters in Section 8-
4.2 shall apply. +r�
Trench drain shall be installed per manufacturer's recommendations and product installation
procedures.
�rr
7-08 GENERAL PIPE INSTALLATION REQUIREMENTS `
�
7-08.3 Construction Requirements
7-08.3(1)A Trenches �
Section 7-08.3(1)A is supplemented by adding the following:
�******�
Trench Excavation Incl. Haul includes the trench excavation for the storm sewer, sanitary sewer, and
water main construction in accordance with the trench limits outlined on the plan drawings. All '�'�
trench excavated materials shall be disposed of off-site at an approved Contractor-provided disposal
site. Excavation outside the excavation limits shown on the plan drawings shall be at no additional
expense to the City. +rr�
�
114
�
+� o9iosizoi�
,�r� Contaminated Trench Excavation includes the trench excavation of materials characterized as
contaminated based on sampling results for the storm sewer, sanitary sewer, and water main
construction and in accordance with the trench limits outlined on the plan drawings. This excavated
� soil shall be managed in accordance with applicable state and federal regulations outlined in the
Contract Documents. Handling and disposal of materials shall adhere to all transportation
requirements, receive pre-approval from a disposal facility, manifesting, and record keeping, etc., as
outlined in the Contractor's Contaminated Soil and Groundwater Handling and Management Plan .
'�" The excavations will require a shoring system to limit the volume of excavation. Excavation outside
the trench limits shown on the plan drawings shall be at no additional expense to the City.
o�r 7-08.3(1)C Bedding the Pipe
Section 7-08.3(1)C is supplemented by adding the following:
�******�
�r Pipe bedding for PVC sewer pipe shall consist of clean,granular pea gravel consistent with Section 9-
03.12(3). It shall be placed to a depth of 6" over and 6" under the exterior walls of the pipe.
rrr For all pipe bedding, hand compaction of the bedding materials under the pipe haunches will be
required. Pipe bedding should provide a firm uniform cradle for support of the pipes. Prior to
installation of the pipe,the pipe bedding should be shaped to fit the lower part of the pipe exterior
�r with reasonable closeness to provide uniform support along the pipe. Hand compaction shall be
accomplished by using a suitable tamping tool to firmly tamp bedding material under the haunches
of the pipe. Care shall be taken to avoid displacement of the pipe during the compaction effort.
r.r� Pipe bedding material should be used as pipe zone backfill and placed in layers and tamped around
the pipes to obtain complete contact.
Bedding material shall meet the requirements of Gravel backfill for Pipe Zone Bedding in accordance
wr with Standard Specification Section 9-03.12(3). Pipe bedding shall be considered incidental to the
pipe and no further compensation shall be made.
In areas where the subgrade soils in the trench excavation consist of fine-grained soils, such as
w�r silt/clay,or organic rich soils,the Engineer may direct the Contractor to use a geotextile separator
fabric be placed over the native soils prior to placement of the pipe bedding. The geotextile shall
meet the requirements of Section 9-33.2(1)Table 3 for Separation. Geotextile shall be paid for by
wir other items.
7-08.3(1)D Pipe Foundation
wrr Section 7-08.3(1)D is a new section:
�******�
Pipe foundation in poor soil: When soft or unstable material is encountered at the subgrade which,
,,,r„ in the opinion of the Engineer,will not uniformly support the pipe, such material shall be excavated
to an additional depth as required by the Engineer and backfilled with foundation gravel material
placed in maximum 12-inch lifts. Foundation gravel shall be CSBC and conform to the requirements
�, of Section 9-03.9(3)of the Standard Specifications.
Corrections faulty grade: Excess excavation below grade shall be backfilled with foundation gravel
� as specified above and thoroughly compacted to the required grade line.
■.
�
115
�
09/08/2017 �
7-08.3(2)A Survey Line and Grade �
Section 7-08.3(2)A is replaced with:
(******�
Survey line and grade control shall be provided in accordance with Sections 1-05.4, 1-05.5 and 1-11 arir
in a manner consistent with accepted practices.
The Contractor shall transfer line and grade into the trench where they shall be carried by means of
a laser beam. Any other procedure shall have the written approval of the Engineer. �rr
7-08.3(2)B Pipe Laying—General
Section 7-08.3(2)B is supplemented by adding the following: �
�******�
Checking of the invert elevation of the pipe may be made by calculations from measurements on the
top of the pipe, or by looking for ponding of 1/2" or less, which indicates a satisfactory condition. At �
manholes,when the downstream pipe(s) is of a larger size, pipe(s) shall be laid by matching the
(eight-tenths)flow elevation, unless otherwise approved by the Engineer.
+rr
All pipe,fittings,etc.shall be carefully handled and protected against damage, impact shocks,and
free fall. All pipe handling equipment shall be acceptable to the Engineer. Pipe shall not be placed
directly on rough ground but shall be supported in a manner,which will protect the pipe against �rii
injury whenever stored at the trench site or elsewhere. No pipe shall be installed where the lining
or coating show defects that may be harmful as determined by the Engineer. Such damaged lining
or coating shall be repaired, or a new undamaged pipe shall be furnished and installed. �
The Contractor shall inspect each pipe and fitting prior to installation to insure that there are not
damaged portions of the pipe. Any defective, damaged, or unsound pipe shall be repaired or �
replaced. All foreign matter or dirt shall be removed from the interior of the pipe before lowering
into position in the trench. Pipe shall be kept clean during and after laying. All openings in the
pipeline shall be closed with watertight expandable type sewer plugs at the end of each day's �
operation,or whenever the pipe openings are left unattended. The use of burlap, wood, or other
similar temporary plugs will not be permitted.
Where necessary to raise or lower the pipe due to unforeseen obstructions or other causes,the ,�
Engineer may change the alignment and/or the grades. Except for short runs,which may be
permitted by the Engineer, pipes shall be laid uphill on grades that exceed 10 percent. Pipe, which is
laid on a downhill grade,shall be blocked and held in place until sufficient support is furnished by �
the following pipe to prevent movement.
Unless otherwise required, all pipe shall be laid straight between the changes in alignment, and at
uniform grade between changes in grade. For concrete pipes with elliptical reinforcement,the pipe ,�
shall be placed with the minor axis of the reinforcement in a vertical position.
Immediately after the pipe joints have been made, proper gasket placement shall be checked with a
feeler gage as approved by the pipe manufacturer to verify proper gasket placement. �
7-08.3(2)E Rubber Gasketed Joints
Section 7-08.3(2)E is supplemented as follows: �
�******�
Care shall be taken by the Contractor to avoid over pushing the pipe and damaging the pipe or joint
system. Any damaged pipe shall be replaced by the Contractor at his expense. ,�
�
116
�
� o9iosi2o��
�rr 7-08.3(2)H Sewer Line Connections
Section 7-08.3(2)H is supplemented by adding the following:
(******�
�r All connections not occurring at a manhole or catch basin shall be done utilizing pre-manufactured
tee connectors or pipe sections approved by the Engineer. Any other method or materials proposed
for use in making connections shall be subject to approval by the Engineer.
,,,,,, Unless otherwise approved by the Engineer, all connections of lateral sewers to existing mains
shall be as follows:
A. Vitrified Clay Main Cut in new PVC "Tee" using "Strong-Back" Flexible
'�' Couplings (Fernco or approved equal).
B. Concrete Main Cut in new PVC "Tee" using "Strong-Back" Flexible
Couplings (Fernco or approved equal).
� C. PVC&C900 PVC Main Core-drilled with Romac Saddle (or approved equal) or
cut in new "Tee" using "Strong-Back" Flexible Couplings
(Fernco or approved equal)..
D. Ductile Iron Main Core-drilled with Romac Saddle (or approved equal).
�r
Connections (unless booted connections have been provided for) to existing concrete
manholes shall be per Section 7-05.3(3).
�` 7-08.3(2)J Placing PVC Pipe
Section 7-08.3(2)J is an added new section:
�******�
�" In the trench re ared as s ecified in Section 7-02.3 1 PVC i e shall be laid be innin at the lower
, p p p � ) p�P g� g
end,with the bell end upgrade. Gravel Backfill for Pipe Zone Bedding or Pea Gravel will be used as
the bedding material and extend from 6" below the bottom of the pipe to 6" above the top of the
� pipe. When it is necessary to connect to a structure with a mudded joint a rubber gasketed
concrete adapter-collar will be used at the point of connection.
�` 7-08.3(3)A Backfilling Pipe Trenches
Section 7-08.3(3)A is a new section supplementing 7-08.3(3)
�******�
rrr
To the maximum extent available, suitable material obtained from trench or pond excavation shall
be used for trench backfill. All material placed as trench backfill shall be free from rocks or stones
'� larger than 6 inches in their greatest dimension, brush, stumps, logs, roots, debris, and organic or
other deleterious materials. No stones or rock shall be placed in the upper three feet of trench
backfill. Rock or stones within the allowable size limit incorporated in the remainder of fills shall be
"r' distributed so that they do not congregate or interfere with proper compaction.
The existing soils shall not be reused as trench backfill unless otherwise required by the Engineer.
�°' Structural fill shall consist of Gravel Borrow, meeting the requirements of Section 9-03.14(1)of the
Standard Specifications. It should be free of gravel,organics and other debris.The structural trench
backfill should be moisture conditioned to within approximately 3 percent of optimum moisture
'r"� content, placed in loose horizontal lifts less than 6 inches in thickness, and compacted to at least 95
percent of the maximum dry density(MDD)as determined by the Modified Proctor compaction test
method ASTM D 1557.
w�r
rr
117
�r
09/08/2017 �
Trench backfill shall be densely compacted in a systematic manner using methods that consistently ,;�
produce adequate compaction levels. During placement of the initial lifts,the trench backfill
material shall not be bulldozed into the trench or dropped directly on the pipe. Heavy vibratory
equipment shall not permitted to operate directly over the pipe until a minimum of 2 feet of backfill ,��j
has been placed over the pipe bedding.
Contactor shall take special care to obtain good compaction up to the edges of the excavation as the ,�
shoring is removed in accordance with the Shoring Plan.
The Engineer may be on-site to collect soil samples and to test compaction. The Contractor shall �,
provide site access at all times for compaction testing and sample collection. Areas of the trench
which fail to meet the compaction requirements shall be removed and replace and re-compacted at .
the Contractor's expense. �
The Contractor shall be responsible for any settlement of backfill, sub-base, and pavement that may
occur during the period stipulated in the Contract conditions. All repairs necessary due to �
settlement shall be made by the Contractor at his expense.
Backfill in unimproved areas shall be compacted to at least 90 percent of maximum dry density as �
determined by the modified proctor compaction test,ASTM D1557.
The Contractor shall be responsible for the disposal of any excess excavated material.Special care „�;
must be taken to obtain good compaction up to the edges of the excavation as the shoring is
removed. Moreover, attention must be paid to ensuring good compaction around manholes.
w
7-09 PIPE AND FITTINGS FOR WATER MAINS
7-09.3(15)A Ductile Iron Pipe �
Section 7-09.3(15) is revised to read as follows:
Long radius curves with radius of 400 feet or more, either horizontal or vertical, pipe may be laid ,y,�
with standard pipe lengths by deflecting the joints. If the pipe is shown curved on the Plans and no
special fittings are shown,the Contractor can assume that the curves can be made by deflecting the
joints with standard lengths of pipe. If shorter lengths are required,the Plans will indicate maximum �
lengths that can be used.The amount of deflection at each pipe joint when pipe is laid on a �'
horizontal or vertical curve shall not exceed 50%of the manufacturer's printed recommended
deflections. The Contractor shall submit to the Engineer the pipe manufacturer's joint deflection
recommendations prior to pipe installation indicating deflections are within allowable AWWA �
specification tolerances.
Where field conditions require deflection or curves not anticipated by the Plans,the Engineer will
determine the methods to be used. No additional payment will be made for laying pipe on curves as �
shown on the Plans, or for field changes involving standard lengths of pipe deflected at the joints.
When special fittings not shown on the Plans are required to meet field conditions, additional
payment will be made for special fittings as provided in Section 1-09.6.
�
When rubber gasketed pipe is laid on a curve,the pipe shall be jointed in a straight alignment and
then deflected to the curved alignment.Trenches shall be made wider on curves for this purpose.
Where pipe installation on curves requires the use of special fittings, concrete blocking shall be used �
per Section 7-09.3(21).
�
118
�
�r• o9iosizo»
,�„ Where restrained joint pipe is installed on a curve, the Contractor shall submit the pipe
manufacturer's recommendations to the Engineer for approval.
7-09.3(15)B Polyvinyl Chloride (PVC) Pipe(4 inches and Over)
""� Section 7-09.3(15)B is supplemented as follows:
(******�
Polyvinyl Chloride (PVC) Pipe shall not be used for water mains and appurtenances.
�
7-09.3(17) Laying Ductile Iron Pipe and Fittings with Polyethylene Encasement
The title and text of section 7-09.3(17) has been revised as follows:
�******�
�"" The Contractor shall lay ductile iron pipe with a polyethylene encasement. Pipe and polyethylene
encasement shall be installed in accordance with AWWA C105. The polyethylene encasement shall
also be installed on all appurtenances, such as pipe laterals, couplings, fittings, and valves, with 8-mil
�, polyethylene plastic in accordance with Section 4-5 of ANSI 21.5 or AWWA C105.
The polyethylene wrap shall be tube type and black color. Any damage that occurs to the wrap shall
be repaired in accordance with ANSI/AWWA C105/A21.5-93.
r
Installation of the polyethylene encasement shall be considered incidental to the installation of the
pipe and no additional payment shall be allowed.
"r" 7-09.3(19)A Connections to Existing Mains
Section 7-09.3(19) is revised to read as follows:
;,,� The Contractor shall not operate any valve on existing Water Main.
The City of Renton Water Operations and Maintenance staff will make all connections to charged
water mains and will operate all valves to accomplish shutdowns and subsequent reactivation. The
� draining of existing water mains will be done by City water maintenance staff. The Contractor shall
provide pumping and disposal of the water from the draining of the existing water mains including
de-chlorination of the water prior to disposal.
"w' Connections to the existing water main shall not be made without first making the necessary
scheduling arrangements with the Engineer in advance. The Contractor shall request water main
shut-offs for connections of new water mains to existing water mains at least ten (10) working days
,�„ in advance for each connection. Approval of connections to existing water main is contingent on the
Water Main and appurtenances being completely installed, tested, cleaned with polypig, disinfected
and flushed per Contract requirements.
+� City's water operations and maintenance staff will notify in writing all water customers affected by
the shut-offs of the water mains at least 48 hours in advance (not including weekends and holidays)
of any water shut-offs. The Contractor may be required to perform the connection during times
other than normal working hours. Water main shut-offs shall occur during non-holiday weekdays
i""' unless otherwise specified in the contract documents. Water main shut-offs shall not occur in the
five (5)weekdays preceding or the day after the major holidays listed below:
� New Year's Day, Martin Luther King Jr. Day, Memorial Day, Independence Day, Labor Day, Veterans
Day,Thanksgiving Day, Christmas Day.
Due to the needs of various water customers in the project vicinity, water shut-off periods are
limited to the times set forth below:
+rw
Days Hours
Monday to Thursday 9:00 AM TO 3:00 PM
�
Friday to Sunday DO NOT SCHEDULE
The City of Renton's Water Maintenance Manager, at his/her sole discretion, may adjust the above
shut-off periods in order to address specific project circumstances and customer needs. No water
rw
119
r
o9iosi2o�� �
main shutoffs affecting public schools will be allowed during scheduled school hours. The City �
reserves the right to re-schedule the connection if the work area is not ready at the scheduled time
for the connection.
Points of connection to existing water mains shall be exposed by hydro excavation or potholing prior �rr
to trenching of the new water mains. Before the installation of the new water mains,the Contractor
shall field verify, in the presence of the Engineer, the actual location and depth of the existing water
mains where new connections will be made to assure proper fit. Care shall be taken not to disturb
existing thrust blocks and soil bearing areas. After excavation, the Contractor shall verify the '�
dimensions, type, condition, and roundness of the exposed water main. The Contractor shall
immediately notify the Engineer if the connection cannot be made as specified by the Contract Plans
in order that the connection detail may be revised. When necessary, the profile shall be adjusted as �
directed by the Engineer to prevent abrupt changes in grade and alignment of the water main and
connection.
The Contractor shall provide all saw-cutting, removal and disposal of existing surface improvements, �
excavation, haul and disposal of unsuitable materials, shoring, de-watering, foundation material, at
the connection areas before the scheduled time for the connection by the City. The Contractor shall
provide all materials necessary for the City Water Maintenance personnel to install all connections to '"
existing water mains as indicated on the contract plans, including fittings, couplings, pipe spools, °1�
shackle materials to complete the connections.
The City Water Operations and Maintenance staff will: ,,;�,
a) Deactivate and dewater the existing and new water main to perform the connections. The
Contractor shall provide pumping and disposal of the water from the draining of the water
mains including de-chlorination.
b) Cut, remove and dispose pipe sections as necessary to install the new Materials with +r�►
Contractor's assistance
c) Swab all connecting pipe and fittings with 5-6%chlorine solution
d) Perform the connection work '
e) Reactivate and flush the Water Main �
The Contractor shall install the polywrap on all pipe and fittings at the connection points and
installed concrete thrust blocks per Contract standard plans and specifications. �
In addition to those connections shown on the Plans, segments of a new Water Main may be placed
in service prior to completion of the new Water Main. All connection between the charged and
uncharged segments of the new Water Main, including connection to a new Tapping Tee and Valve
will be done by the City of Renton Water Operations and Maintenance staff. .r��
Connections to existing water mains which include the cutting of the existing water main for the
installation of new in-line tee and valves shall be done in two steps
�
Step 1: Cut-in of existing water main for installation of in-line tee,valves and appurtenances
The Contractor shall provide all materials necessary for the City Water Maintenance personnel to cut
the existing water main as indicated on the contract plans for the installation of the in-line tee and �
valves, including but not limited to the required fittings, couplings, pipe spools, shackle materials to
complete the cut-in. After the cut-in of the in-line tee and valves by City personnel, the Contractor
shall provide and install concrete blocking and polyethylene encasement behind the tee and other
fittings. A minimum 3-day curing period is for all concrete blockings before a connection can be �
made to the new water mains or new tapping valve.
Step 2: Connection of new water main to the above cut-in tee and valves, or to a new tapping valve �
on existing water mains
7-09.3(21) Concrete Thrust Blocking and Dead-Man Block
Concrete thrust blocking shall be placed at bends, tees, dead ends, crosses and on other fittings in �rr
conformance to the City of Renton Standards Plans, latest revisions and Contract Plans.
�
120
�
+� 09/08/2017
�,,, Concrete thrust collar and blocking and dead-man thrust blocking shall be installed at locations
shown on the plans and shall be in conformance with the Standard Plans and contract Plans.
Reinforcement steel shall be Grade 40 or better.
Blocking shall be poured in place Ready-Mix Concrete Class 3000 with a minimum compressive
� strength at 28 days of 3,000 psi. Job site mixing, hand-mixed concrete and mobile concrete mixers
are not allowed.
� All fittings to be blocked shall be wrapped with 8-mil polyethylene plastic. Concrete blocking shall
bear against solid undisturbed earth at the sides and bottom of the trench excavation and shall be
shaped and properly formed with plywood or other acceptable forming materials so as not to
obstruct access to the joints of the pipe, bolts or fittings. The forms shall be removed prior to
,�, backfilling. Unacceptable concrete blocking shall be replaced at the Contractor's expense.
The Contractor shall provide the Engineer at least 1 Working Day advance notice before pouring
concrete thrust blocking and 1 Working Day advance notice for inspection and approval of all
�► concrete blocking prior to backfilling.
� 7-09.3(23) Hydrostatic Pressure Test
Section 7-09.3(23) is revised to read as follows:
Water main and appurtenances including service connections to the meter setter shall be tested in
� sections of convenient length under a hydrostatic pressure equal to 150 psi in excess of that under
which they will operate or in no case shall the test pressure be less than 225 psi at the highest point
on the water main. Pumps,gauges, plugs, saddles, corporation stops, miscellaneous hose and piping,
and measuring equipment necessary for performing the test shall be furnished and operated by the
�' Contractor.
The Contractor shall obtain a hydrant meter permit from the City by completing a permit application
;,� and making the required security deposits. The Contractor shall use the City's issued hydrant meter
with an attached backflow prevention assembly to draw water from the City' water system to fill the
water mains for poly-pigging, testing, cleaning, disinfection and for subsequent flushing purposes.
There will be a charge for the water used for filling, testing, cleaning and disinfection of the water
' mains.
Sections to be tested shall normally be limited to 1,500 feet or less. The Engineer may require that
the first section of pipe, not less than 1,000 feet in length, installed by each of the Contractor's
'� crews, be tested in order to qualify the crew and the materials. Pipe laying shall not be continued
more than an additional 1,000 feet until the first section has been tested successfully.
� The pipeline shall be backfilled sufficiently to prevent movement of the pipe under pressure. Thrust
blocks shall be in place and time allowed for the concrete to cure before testing. Where permanent
blocking is not required, the Contractor shall furnish and install temporary blocking and remove it
after testing.
r
Before applying the specified test pressure, the water main shall be slowly filled and air shall be
expelled completely from the pipe, valves and hydrants. If permanent air vents are not located at all
high points, the contractor shall install corporation cocks at such points so that the air can be
""' expelled as the line is filled with water. After all the air has been expelled, the corporation cocks
shall be closed and the test pressure applied. At the conclusion of the pressure test, the corporation
cocks shall be removed and plugged.
�
The Contractor shall perform a leakage test concurrently with the pressure test. The pressure test
shall be conducted for a 2-hour period.
The test shall be accomplished by pumping the main up to the required pressure, stopping the pump
�r for 2 hours, and then pumping the main up to the test pressure again. During the test, the section
being tested shall be observed to detect any visible leakage.
rrr
121
�r
o9iosizoi� �
A clean container shall be used for holding water for pumping up pressure on the main being tested. „�,
This makeup water shall be sterilized by the addition of chlorine to a concentration of 50 mg/I.
The acceptability of the pressure test and leakage test will be determined by two factors as follows:
1. The loss in pressure shall not exceed 5 psi during the 2-hour test period. �►
2. The quantity of water lost from the main and appurtenances shall not exceed the number of
gallons during the 2-hour test period as listed in the following table.
Allowable leakage in gallons per 1000 ft. of pipeline*for a 2-hour test period �
Nominal Pipe Diameter in inches
Test Pressure 4" 6" 8" 10" 12" 16" 20" 24" �
in psi
400 0.60 0.90 1.20 1.50 1.80 2.40 3.00 3.60
375 0.58 0.87 1.16 1.45 1.74 2.33 2.91 3.49
350 0.56 0.84 1.12 1.40 1.69 2.25 2.81 3.37 �
275 0.50 0.75 1.00 1.24 1.49 1.99 2.49 2.99
250 0.47 0.71 0.95 1.19 1.42 1.90 2.37 2.85
225 0.45 0.68 0.90 1.13 1.35 1.80 2.25 2.70 �
200 0.42 0.64 0.85 1.06 1.28 1.70 2.12 2.55
*If the pipeline under test contains sections of various diameters, the allowable leakage will be the
sum of the computed leakage for each size. For those diameters or pressures not listed, the formula „�
below shall be used:
The quantity of water lost from the main shall not exceed the number of gallons per hour as
determined by the formula:
�
L= SDdP
266,400
where:
L= Allowable leakage in gallons/hour �
S= Gross length of pipe tested, feet
D = Nominal diameter of the pipe in inches
P = Test pressure during the leakage test in psi ,�
The quantity of water required to restore the pressure shall be accurately determined by either 1)
pumping from an open container of suitable size such that accurate volume measurements can be
made by the Engineer or, 2) by pumping through a positive displacement water meter with a sweep �'
unit hand registering one (1)gallon per revolution.The meter shall be approved by the Engineer.
Pressure gauges used in the test shall be accompanied with certifications of accuracy from a testing �
Laboratory approved by the Engineer.
Any visible leakage detected shall be corrected by the Contractor regardless of the allowable leakage
specified above. Should the tested section fail to meet the pressure test successfully as specified,the
Contractor shall, at no additional expense to the Contracting Agency, locate and repair the defects �
and then retest the pipeline.
All tests shall be made with the hydrant auxiliary gate valves open and pressure against the hydrant
inlet valve. After the test is completed, each valve shall be tested by closing each in turn and �
relieving the pressure beyond. This test of the valve will be acceptable if there is no immediate loss
of pressure on the gauge when the pressure comes against the valve being checked. The Contractor
shall verify that the pressure differential across the valve does not exceed the rated working �
pressure of the valve.
Prior to calling out the Engineer to witness the pressure test,the Contractor shall have all equipment
set up completely ready for operation and shall have successfully performed the test to ensure that ,,,�i,
the pipe is in satisfactory condition.
�
122
�
+� o9iosi2o��
„w, Defective materials or workmanship, discovered as a result of hydrostatic field test, shall be replaced
by the Contractor at no additional expense to the Contracting Agency. Whenever it is necessary to
replace defective material or correct the workmanship, the hydrostatic test shall be re-run at the
Contractor's expense until a satisfactory test is obtained.
w�r
7-09.3�24)A Flushing and "Poly-pigging"
Section 7-09.3(24)A shall be revised and supplemented as follows:
wr �******�
Prior to disinfection and prior to final flushing of the Water Mains for bacteriological sampling and
testing, all Water Mains shall first be poly-pigged to remove any solids or contaminated materials
that may have entered or become lodged in the pipes during installation.
+� The "Poly-pig" shall be light density foam (1-2 Ibs/cubic-foot) with 90A durometer urethane rubber
coating on the rear of the "Poly-pig" only. The "Poly-pig" shall be cylinder shaped with bullet nose or
squared end. The "Poly-pigs" shall be inserted in the pipes and retrieved form the pipes through
launching stations with vertical crosses and blow-off assemblies as shown and on the Contract Plans
"�' and Standard Plans.
If the main cannot be poly-pigged, then a tap shall be provided large enough to develop a flow
,r„ velocity of at least 2.5 fps in the water main.
Taps required by the Contractor for temporary or permanent release of air, chlorination or flushing
purposes shall be provided by the Contractor as part of the construction of water mains.
+� The Contractor shall be responsible for disposal of treated water flushed from mains and shall
neutralize the wastewater for protection of aquatic life in the receiving water before disposal into
any natural drainage channel, i.e., receiving water, waters of the State, including wetlands. The
Contractor shall be responsible for disposing of disinfecting solution to the satisfaction of the
� Contracting Agency and local authorities. At a minimum, chlorinated water shall be dechlorinated
to a concentration of 0.1 parts per million (ppm) or less, and pH adjustment to within 6.5 — 8.5
standard units before discharging to surface waters of the State or to a storm sewer system that
,,,,, drains to surface waters of the State.
If approved by the Engineer and by the local authority responsible for the sanitary sewer system,
disposal of treated water from mains may be made to an available sanitary sewer, provided the rate
+� of disposal will not overload the sewer.
7-09.3(24)D Dry Calcium Hypochlorite
� Section 7-09.3(24)D has been replaced with:
�******�
Dry calcium hypochlorite shall not be placed in the pipe as laid.
� 7-09.3(24)K Retention Period
Section 7-09.3(24)K has been revised as follows:
(******�
Treated water shall be retained in the pipe at least 16 hours but no longer than 48 hours. After the
"'� retention eriod the chlorine residual shall be tested at all
p , pipe extremities and at other
representative points and shall measure at least 10 mg/L. If a measurement of less than 10 mg/L is
obtained repeat disinfection is required.
�
7-09.3(24)N Final Flushing and Testing
Section 7-09.3(24)N has been revised as follows:
�******�
"�" Following chlorination,treated water shall be flushed from the newly-laid pipe until the replacement
water throughout its length shows, upon test, the absence of chlorine. In the event chlorine is
normally used in the source of supply, then the tests shall show a residual not in excess of that
�,,, carried in the water supply system.
A sample tap shall be located ahead of the flushing hose for convenience and for sanitary sampling.
Before placing the lines into service, two satisfactory reports taken at least 15 minutes apart from
�rr
123
�
o9iosizo�� �
each sampling point shall be received from the local or State Health Department or from a State �
accredited testing laboratory on samples collected from representative points in the new system.
Samples will be collected and bacteriological tests obtained by the Engineer.
At a minimum,chlorinated water shall be dechlorinated to a concentration of 0.1 parts per million �+
(ppm)or less, and pH adjustment to within 6.5 to 8.5 standard units, if necessary, before discharging
to surface waters of the State or to a storm sewer system that drains to surface waters of the State.
�
7-09.3(25) Joint Restraint Systems
Section 7-09.3(25) is a new additional section:
�******�
General: �
Where shown in the Plans, in the Specifications or required by the Engineer, joint restraint system
(shackle rods) shall be used. All joint restraint materials used shall be those manufactured by Star
National Products, 1323 Holly Avenue, PO Box 258, Columbus Ohio 43216, unless an equal alternate w�
is approved in writing by the Engineer.
Materials:
Steel types used shall be: '�
High strength low-alloy steel (cor-ten),ASTM A242, heat-treated, superstar"SST" series.
High strength low-alloy steel (cor-ten),ASTM A242, superstar"SS" series. �
Items to be galvanized are to meet the following requirements:
+r�
ASTM A153 for galvanizing iron and steel hardware.
ASTM A123 for galvanizing rolled, pressed and forged steel shapes. '
�rr►
Joint restrainer system components:
Tiebolt: ASTM A242, type 2, zinc plated or hot-dip galvanized. SST 7:5/8" for 2" and 3" mechanical �
joints, 3/4" for 4" to 12" mechanical joints, ASTM A325, type 3D, except tensile strength of full-body
threaded section shall be increased to 40,000 Ibs. minimum for 5/8" and 60,000 Ibs. minimum for
3/4" by heat treating (quenching and tempering) to manufacturer's reheat and hardness
Specifications. SST 753: 3/4" for 14" to 24" mechanical joints. Same ASTM Specification as SST 7. ,�iri
SST 77: 3/4" same as SST 7,except 1" eye for 7/8" rod.Same ASTM Specification as SST 7.
Tienut: Heavy hex nut for each tiebolt: SS8: 5/8" and 3/4",ASTM A563, grade C3, or zinc plated. S8:
5/8" and 3/4",ASTM A563,grade A, zinc plated or hot-dip galvanized. "�
Tiecoupling: Used to extend continuous threaded rods and are provided with a center stop to aid
installation, zinc plated or hot-dip galvanized. SS10: for 5/8" and 3/4"tierods, ASTM A563, grade C3. �
S10:for 5/8" and 3/4"tierods, ASTM A563,grade A.
Tierod: Continuous threaded rod for cutting to desired lengths, zinc plated or hot-dip galvanized.
SS12: 5/8" and 3/4" diameter, ASTM A242, type 2; ANSI 61.1. 512: 5/8" and 3/4" diameter, ASTM �
A36, A307.
Tiewasher: Round flat washers, zinc plated or hot-dip galvanized. SS17: ASTM A242, F436. 517:ANSI
B18.22.1. �
Installation:
Install the joint restraint system in accordance with the manufacturer's instructions so all joints are �
mechanically locked together to prevent joint separation. Tie-bolts shall be installed to pull against
the mechanical joint body and not the MJ follower. Torque nuts at 75-90 foot pounds for 3/4" nuts.
Install tie-couplings with both rods threaded equal distance into tie-couplings. Arrange tie-rods
�
124
�
� 09/08/2017
�r symmetrically around the pipe.
Pi e Diameter Number of 3/4"Tie Rods Re uired
■r 4„ 2
6" 2
8" 2
,�„ 10" 4
12" 4
14" 6
Pi e Diameter Number of 3/4"Tie Rods Re uired
'�` 16" 6
18" 8
20 10
,� 24" 12
Where a manufacturer's mechanical joint valve or fitting is supplied with slots for"T" bolts instead of
� holes, a flanged valve with a flange by mechanical joint adapter shall be used instead, so as to
provide adequate space for locating the tie-bolts.
Where a continuous run of pipe is required to be restrained, no run of restrained pipe shall be
"�` greater than 60 feet in length between fittings. Insert long body solid sleeves as required on longer
runs to keep tie-rod lengths to the 60 foot maximum. Pipe used in continuously restrained runs shall
be mechanical joint pipe and tie-bolts shall be installed as rod guides at each joint.
�
Where poly wrapping is required all tie-bolts, tie-nuts, tie-couplings, tie-rods, and tie-washers, shall
be galvanized. All disturbed sections will be painted, to the Inspector's satisfaction, with Koppers
Bitomastic No. 300-m, or approved equal.
�r
Where poly wrapping is not required all tie-bolts, tie-nuts, tie-couplings, tie-rods and tie-washers
may be galvanized as specified in the preceding paragraph or plain and painted in the entirety with
�
Koppers Bitumastic No. 800-m, or approved equal.
Tie-bolts, tie-nuts, tie-couplings, tie-rods, and tie-washers shall be considered incidental to
installation of the pipe and no additional payment shall be made.
�
7-09.4 Measurement
Measurement and Payment Schedule for installation of water mains and
�
appurtenances is shown in Section 1-09.14
Section 7-09.4 is revised as follows:
�******�
Measurement of bank run gravel for trench backfill will be by the cubic yard measured by the
� calculation of neat lines based on maximum trench width per Section 2-09.4 or by the ton, in
accordance with Section 1-09.
Measurement for payment of concrete thrust blocking and dead-man blocks will be per cubic-yard
"'�` when these items are included as separate pay items. If not included as separate pay items in the
contract, then thrust blocking and dead-man blocks shall be considered incidental to the installation
of the water main and no further compensation shall be made.
�
Measurement for payment for connections to existing water mains will be per each for each
connection to existing water main(s) as shown on the Plans.
� 7-09.5 Payment
Measurement and Payment Schedule for installation of water mains and
appurtenances is shown in Section 1-09.14
�
125
.w.
09/08/2017 �
Section 7-09.5 is revised and supplemented as follows: „�
�******�
"Furnish and Install Ductile Iron Water Main & Fittings", per lineal foot.
The unit contract price per linear foot for each size and kind of"Furnish and Install Ductile Iron +�
Water Main & Fittings" shall be full pay for the bid item as described in Section 1-09.14.
"Concrete Thrust Blocking and Dead-Man Anchor Blocks", per cubic yard. �
The unit contract price per cubic yard for "Concrete Concrete Thrust Blocking and Dead-Man Anchor
Blocks" shall be full pay for the bid item as described in Section 1-09.14.
�
"Connection to Existing Water Mains", per each.
The unit contract price per each for"Connection to Existing Water Mains" shall be full pay for the bid ''
item as described in Section 1-09.14. 'r'�
"Select Imported Trench Backfill", per cubic yard or ton.
The unit contract price per cubic yard or ton for"Select Imported Trench Backfill" shall be full pay for �
the bid item as described in Section 1-09.14.
"Removal and Replacement of Unsuitable Foundation Material", per ton or cubic yard. �
The unit contract price per cubic yard or ton for "Removal and Replacement of Unsuitable
Foundation Material" shall be full pay for the bid item as described in Section 1-09.14.
�
7-12 VALVES FOR WATER MAINS
7-12.3(1) Installation of Valve Marker Post �
Section 7-12.3(1) has been revised as follows:
�******�
Where required, a valve marker post shall be furnished and installed with each valve. Valve marker
posts shall be placed at the edge of the right-of-way opposite the valve and be set with 18 inches of �rr
the post exposed above grade.
The rest of this section is deleted.
�
7-12.3(2) Adjust Existing Valve Box to Grade
Section 7-12.3(2) is a new section:
�******) �
Valve boxes shall be adjusted to grade in the same manner as for manholes, as detailed in Section 7-
05.3(1) of the City of Renton Standard Details. Valve box adjustments shall include, but not be
limited to,the locations shown on the Plans.
�
Existing roadway valve boxes shall be adjusted to conform to final finished grades. The final
installation shall be made in accordance with the applicable portions of Section 7-12.
In the event that the existing valve box is plugged or blocked with debris, the Contractor shall use '�
whatever means necessary to remove such debris, leaving the valve installation in a fully operable
condition.
�
The valve box shall be set to an elevation tolerance of one-fourth inch (1/4") to one-half inch (1/2")
below finished grade.
7-12.4 Measurement """"
Measurement and Payment Schedule for installation of water mains and
appurtenances is shown in Section 1-09.14
�
126
11�i
� o9ioaizo��
�
Section 7-12.4 is supplemented by adding the following:
(******�
Adjustment of existing valve boxes to grade shall be measured per each, if included as a separate pay
� item in the Contract; if not a separate pay item but required to complete the Work, then value box
adjustment shall be considered incidental.
� Hydrant auxiliary gate valve will be included in the measurement for hydrant assembly and will not
be included in this measurement item.
7-12.5 Payment
�,,,, Measurement and Payment Schedule for installation of water mains and
appurtenances is shown in Section 1-09.14
Section 7-12.5 is replaced with the following:
�r �******�
"Furnish and Install -Inch Gate Valve Assembly", per each.
� The unit contract price per each for "Furnish and Install -Inch Gate Valve Assembly" shall be full
pay for the bid item as described in Section 1-09.14.
"Air-Release/Air-Vacuum Valve Assembly," per each.
�
The unit contract price per for air-release/air-vacuum valve assembly shall be for all, labor,
equipment and material to complete the installation of the assembly including but not limited to,
excavating,tapping the main, laying and jointing the pipe and fittings and appurtenances, backfilling,
�+ testing, flushing, and disinfection, meter box and cover, at location shown on the plans, and per the
City of Renton Standard Details, latest revision.
�
"Adjust Existing Valve Box to Grade (RC)," per each.
The contract bid price for "Adjust Existing Valve Box to Grade" above shall be full compensation for
all labor, material, tools and equipment necessary to satisfactorily complete the Work as defined in
,�„ the Contract Documents, including all incidental Work. If not included as a separate pay item in the
Contract, but required to complete other Work in the Contract, then adjustment of valve boxes shall
be considered incidental to other items of Work and no further compensation shall be made.
�' 7-14 HYDRANTS
7-14.3(i) Setting Hydrants
„�, Paragraph four and five of Section 7-14.3(1) is revised and the section is supplemented as follows:
�******�
7-14.3(1) Hydrant Assembly
�' Where shown on the Plans, hydrants shall be installed in accordance with the Standard Plans and
Contract specifications. A minimum 3-foot radius unobstructed working area shall be provided
around all hydrants. The bottom surface of the breakaway flange shall be set 2-inches minimum and
„r,s 7-inches maximum above the concrete shear block finished grade.
For each hydrant requiring vertical adjustment, see Section 7-14.3(6).
Fire hydrants shall be of such length as to be suitable for installation with connections to 6", 8" and
� 10" piping in trenches 3 - 1/2 feet deep unless otherwise specified. The hydrant shall be designed
for a 4-1/2 foot burial where 12" and larger pipe is shown unless otherwise noted in the Plans.
� After installation hydrants shall be subjected to a hydrostatic test as specified in Section 7-09.3(23).
The hydrant excavation shall be backfilled and compacted when installation and testing are complete
and accepted by the Engineer.
�
127
�.
o9iosizo�� '�
�
A concrete shear block as shown by the hydrant details on the Standard Plans shall be constructed
for all hydrants. Construction, Materials, and finishing of the concrete shear block shall conform to
Section 8-14, Cement Concrete Sidewalk. The shear block shall be set flush with the immediately
surrounding finish grade. �
The Contractor shall flush, test and disinfect furnished hydrants and hydrant barrel extensions
according to Section 7-14.3(6).
Upon completion of the project, all fire hydrants shall be painted with two field coats of Kelly- '�
Moore/Preservative paint No. 5780-563 DTM Acrylic Gloss Safety Yellow or approved equal.
Any hydrants not in service shall be identified by covering with a burlap or plastic bag properly �,;�„
secured.
Fire hydrant assembly shall include: main line cast-iron or ductile iron tee (MJ x FL), 6" gate valve (FL
x MJ), 6" DI spool (PE x PE) up to 18 feet in length, 5-1/4" MVO fire hydrant (MJ connection), 4" x 5" �
Storz adapter with stainless steel cable, cast iron valve box, cover, valve operating nut extension, 2-
3/4" Cor-Ten shackle rods and accessories, concrete blocks,shear block and blue pavement marker.
�
7-14.3(3) Resetting Existing Hydrants
Section 7-14.3(3) is supplemented with the following:
All existing hydrants to be reset shall be rebuilt to the approval of the Engineer. All rubber gaskets +�
shall be replaced with new gaskets of the type required for a new installation of the same type.
Unless a specific bid item has been included in the Proposal/Contract Document, resetting existing
hydrants shall be incidental to and included in the various bid items.
�
7-14.3(4) Moving Existing Hydrants
Section 7-14.3(4) is supplemented with the following: �
�
All existing hydrants to be moved shall be rebuilt to the approval of the Engineer. All rubber gaskets
shall be replaced with new gaskets of the type required for a new installation of the same type.
Unless a specific bid item has been included in the Proposal/Contract Document, resetting existing �
hydrants shall be incidental to and included in the various bid items.
Unless a specific bid item has been included in the Proposal/Contract Document, resetting existing �
hydrants shall be incidental to and included in the various bid items.
7-14.3(7) Remove and Salvage Hydrant `
Section 7-14.3(7) is added as follows: �
Existing hydrants shall be removed where shown in the Plans. Removed hydrants shall be delivered
to the City of Renton shops by the Contractor. The existing hydrant lateral tee shall be removed from �p
the main.
Unless a specific bid item has been included in the Proposal/Contract Document, resetting existing
hydrants shall be incidental to and included in the various bid items. ;.
�
7-14.5 Payment
Measurement and Payment Schedule for installation of water mains and
appurtenances is shown in Section 1-09.14 `
�
Section 7-14.5 is revised as follows:
�******� .
Payment will be made in accordance with Section 1-04.1, for each of the following bid items that are �
included in the proposal:
�r
128
�
� 09/08/2017
,,,� "Furnish and Install Hydrant Assembly", per each.
The unit contract price per each for " Furnish and Install Hydrant Assembly", shall be full pay for the
bid item as described in Section 1-09.14.
r
"Resetting Existing Hydrants", per each.
�, The unit contract price per each for"Resetting Existing Hydrant" shall be full pay for all Work to reset
the existing hydrant, including rebuilding (or replacement with a new hydrant), shackling, blocking,
painting, and guard posts and reconnecting to the main.The new pipe connecting the hydrant to the
main shall be considered incidental and no additional payment shall be made. Guard posts, shown
�„ on the Plans shall be incidental to the contract.
"Moving Existing Hydrants", per each.
�' The unit contract price per each for "Moving Existing Hydrant" shall be full pay for all Work to move
the existing hydrant, including new tee, rebuilding (or replacement with a new hydrant), shackling,
blocking, painting, and guard posts and reconnecting to the main. The new pipe connecting the
� hydrant to the main shall be considered incidental and no additional payment shall be made. Guard
posts, shown on the Plans shall be incidental to the contract.
7-15 SERVICE CONECTIONS
+�r
7-15.3 Construction Details
Section 7-15.3 is supplemented as follows:
�******�
� Section 7-15.3 is revised and supplemented with the following:
+�rr
All pipe materials for new water service lines and for extension or replacement of existing water
service lines shall be copper and lead free in accordance with the Federal Reduction of Lead in
Drinking Water Act. Pipe materials for water service line installation for size 2-inch or less and
connection to ductile iron water main shall be copper type "K" annealed tubing and seamless (ANSI
� H33.1).
rr�
Ductile iron pipe Class 52 or stronger shall be direct-tapped with 1-inch corporation stops for 1-inch
service lines.
All meter setters for residential domestic use shall be 1-inch by 1-inch setters unless otherwise
�" specified on the Contract Plans. For existing 3/4-inch meters, the Contractor shall furnish and install
reducing couplings to adapt the 1-inch setter to the standard 3/4-inch domestic meter.
'� Where installation of service lines is within existing paved streets, the service lines shall be installed
by a trenchless percussion and impact method (hoe-hogging). If the trenchless percussion and
«�r
impact method fails, regular open trench methods may be used.
Where shown in the Plans,the Contractor shall:
• Furnish and install new water service lines from the new water main to the new meter
� setters and new meter boxes near the existing meters
• Furnish and install adaptors for the relocation of the existing water meters to the new meter
�
setters and re-install the existing meters in the new meter setters
• Connect the new meter setters to the customers' private service lines
• Restore disturbed areas to their approximate original condition as directed by the Engineer.
�
129
�rr
09/08/2017 �
�
7-15.5 Payment ;
Measurement and Payment Schedule for installation of water mains and
appurtenances is shown in Section 1-09.14 �
Section 7-15.5 is revised as follows:
�******)
Payment will be made in accordance with Section 1-04.1, for the following bid item when it is �
included in the proposal:
"Furnish and Install In. Water Service Connection", per each. r�
The unit contract price per each for" Furnish and Install In. Water Service Connection", shall be
full pay for the bid item as described in Section 1-09.14.
�
7-17 SANITARY SEWERS
�
7-17.2 Materials
Section 7-17.2 is replaced with the following:
�******�
Pipe �
Gravity sewer pipe shall be as specified herein and as shown on the Plans. The Contractor shall
provide two copies of the pipe manufacturer's technical literature and tables of dimensional
tolerances to the Engineer. Any pipe found to have dimensional tolerances in excess of those �
prescribed or having defects, which prevent adequate joint seal or any other damage, shall be
rejected. If requested by the Engineer, not less than three nor more than five lengths of pipe for
each size, selected from stock by the Engineer, shall be tested as specified for maximum dimensional �
tolerance of the respective pipe.
Material for PVC sewer pipe shall meet the requirements of Section 9-05.12. �
All pipe shall be clearly marked with type, class, and thickness. Lettering shall be legible and
permanent under normal conditions of handling and storage. "�
7-17.3 Construction Requirements
�
7-17.3(1) Protection of Existing Sewerage Facilities
Section 7-17.3(1) is supplemented by adding the following:
�******�
When extending an existing sewer, the downstream system shall be protected from construction �
debris by placing a screen or trap in the first existing manhole downstream of the connection. It
shall be the Contractor's responsibility to maintain this screen or trap until the new system is placed
in service and then to remove it. Any construction debris, which enters the existing downstream ,�
system, shall be removed by the Contractor at his expense, and to the satisfaction of the Engineer.
When the first manhole is set, its outlet shall be plugged until acceptance by the Engineer.
7-17.3(2jH Television Inspection �
Section 7-17.3(2)H is supplemented by adding the following:
(******�
CCTV Inspection �
1. Sewer sections shall be inspected by means of remote CCTV. If a blockage hampers
�
130
�
� 09/08/2017
„r,c, the inspection of the sewer in one direction,then the Contractor shall attempt to
complete the section by televising from the other manhole to complete the section.
The Contractor must immediately report the obstruction to the Owner or his
representative (hereinafter referred to as "Owner"). All CCTV work shall conform to
'�'�" Current NASSCO-PACP standards.
2. CCTV inspections will be delivered entirely in a GraniteNet compatible format
database using the latest software version on External HDD.
� 3. The Contractor shall perform all CCTV inspections in accordance with NASSCO's
Pipeline Assessment Certification Program (PACP). CCTV inspections will be delivered
entirely in electronic format.The entire survey shall be recorded in an approved
electronic format submitted with electronic links between the data and the video.All
„�;, television inspection reports shall be with-in +/-two (2)feet of the measured linear
footage between manholes along the existing sewer centerline from the start of pipe
to end of pipe.All Owner and PACP required header information must be fully and
accurately entered on all CCTV reports. Work not following these specifications will
� be rejected for payment and the Contractor shall be required to re-CCTV the work.
4. The documentation of the work shall consist of PACP CCTV Reports, PACP database,
logs, electronic reports,etc. noting important features encountered during the
� inspection.The speed of travel shall be slow enough to inspect each pipe joint,tee
connection, structural deterioration, infiltration and inflow sources, and deposits,
but should not, at any time, be faster than 30 feet per minute, except as noted
otherwise in this document.
,,, 5. The camera must be centered in the pipe to provide accurate distance
measurements to provide locations of features in the sewer and these footage
measurements shall be displayed and documented on the video.All PACP
Observations shall be identified by audio and on a PACP log.All video must be
�+► continuously metered from manhole to manhole. The pipe should be clean enough
to ensure all defects,features and observations are seen and logged.
6. All CCTV operators working on this project shall have current NASSCO PACP
�rw
certification.
7-17.4 Measurement
,,,, Section 7-17.4 is supplemented as follows:
�******�
Measurement of"Bank Run Gravel for Trench Backfill Sewer" will be determined by the cubic yard in
place, measured by the neat line dimensions shown in the Plans, or by the ton on truck tickets.
�w
7-17.3(2)I Abandon Existing Sanitary Sewer Pipes
arr
Section 7-17.3(2)I is a new section:
�******�
Where it is shown on the plans that existing sanitary sewer pipe(s) is to be abandoned by filling with
�
grout, both ends of the abandoned pipe and all lateral connections to the pipe shall be plugged with
3,000 psi cement concrete and the pipe shall be filled with cement-based grout.
The grout mix design and method of installation shall be approved by the Engineer prior to
�rr
beginning the operation (See Section 9-03.22 for Grout Mix requirements).
7-17.5 Payment
Measurement and Payment Schedule for installation of sanitary sewer mains
,. and appurtenances is shown in Section 1-09.14
Section 7-17.5 is revised and supplemented as follows:
�******�
�' Payment will be made in accordance with Section 1-04.1, for each of the following bid items that are
included in the proposal:
�
131
ar
09/08/2017 �
"Furnish and Install In. sewer pipe", per linear foot. ,�,
The unit contract price per each for " Furnish and Install In. sewer pipe", shall be full pay
for the bid item as described in Section 1-09.14.
�
"Furnish and Install In. side sewer pipe", per linear foot.
The unit contract price per each for " Furnish and Install In. side sewer pipe", shall be full
pay for the bid item as described in Section 1-09.14. �`
"Testing Sewer Pipe", per linear foot.
The unit contract price per linear foot for"Testing Sewer Pipe" shall be full pay for all labor, material �
and equipment required to conduct the leakage tests required in Section 7-17.3(2). If no unit price
for"Testing Sewer Pipe" is included it shall be considered incidental to the pipe items.
"Removal and Replacement of Unsuitable Material", per cubic yard or ton. �
The unit contract price per cubic yard or ton for "Removal and Replacement of Unsuitable Material"
shall be full pay for all Work to remove unsuitable material and replace and compact suitable
material as specified in Section 7-08.3(1)A. ``
�
"Bank Run Gravel for Trench Backfill Sewer", per cubic yard or ton.
The unit contract price per cubic yard or ton for"Bank Run Gravel for Trench Backfill Sewer" shall be
full pay for all Work to furnish, place, and compact material in the trench. ,�y
"Television Inspection", per linear foot. ,
�
7-21 GENERAL SPECIFICATIONS FOR CURED-IN-PLACE PIPE (CIPP)
New Section
7-21.1 Description +r�
This Section specifies rehabilitation of pipelines by the installation of resin-impregnated liner
cured-in-place piping. Service connections and manholes may be rehabilitated with products
specified in other Sections. Contractor shall coordinate rehabilitation of manholes, mainlines, �
lateral interfaces, and laterals with product installers. Contractor shall ensure that resin
systems are compatible with all rehabilitation products that they will contact.
A portion of the pipeline rehabilitation work is located outside of public rights-of-way behind �
single family homes. The Contractor shall be responsible to properly secure materials and
equipment utilized to perform the work required for this project. The Contractor shall
coordinate with property owner(s) to preserve access within the site and maintain the site in a :
safe manner. �
7-21.1(1) Related Work Specified Elsewhere
Resin Impregnated Fabric CIPP, Section 7-22. '
�
Resin Impregnated Fiberglass CIPP,Section 7-23.
7-21.1(2) Licensing
�
The Contractor or sub-contractors shall be registered to work in the City of Renton.
The Contractor or sub-contractor installing the CIPP shall have a current license agreement with the '
product Manufacturer or Assembler. �
Individuals installing the CIPP shall be certified by the product Manufacturer or Assembler.
�
�
132
�
'� 09/08/2017
�rr Lining installation shall be in accordance with the requirements of the product Manufacturer or
Assembler and as directed by their Technical Representative. This includes the correction of
defective work.
�`"` Certification showing that the Installer is currently licensed by the appropriate licensor to perform
CIPP installation shall be provided.
.r 7-21.1(3) Contractor and Manufacturer Qualifications
The Manufacturer of the CIPP liner shall have a minimum of 200,000 linear feet of CIPP successfully
installed in accordance with these specifications. Manufacturer's using standards other than those
""� listed in these specifications shall demonstrate to the satisfaction of the Owner that the standards
followed produce a product that is, at a minimum, equal to the quality of product developed using
�
the listed standards.
The CIPP lining Contractor shall have a minimum of five (5) successfully completed projects totaling
a minimum of 50,000 lineal feet using the proposed CIPP rehabilitation technology. In addition, the
,,,,,, Contractor's project superintendent shall have a minimum of three (3) successfully completed
projects totaling a minimum of 25,000 lineal feet using the proposed CIPP rehabilitation technology.
The Contractor's identified project superintendent shall be on the project for the duration of the
,,,,,, project and shall be available at all times during the CIPP rehabilitation. At least one person on the
Contractor's installation crew shall have a minimum of one (1) year of CIPP installation experience
and shall be on the project site at all times. The Contractor's identified Lateral Cutting Technician
„�, shall have minimum of one (1)year of experience reinstating laterals.
Wastewater collection system rehabilitation products submitted for approval shall be provided with
third party test results supporting long-term performance and structural strength of the product.
"0'' Third party test result data shall be satisfactory to the Engineer. Test samples shall have been
_ prepared so as to simulate the installation methods and trauma of project conditions.
,,,,� 7-21.1(4) Contractor Submittals
All procedures or material descriptions requiring the Engineer's approval shall be submitted not less
than 15 calendar days prior to mobilizing or commencing any CIPP activities at the site of the work
"�' and shall include the following information:
1. CIPP Lining Plan to include the following:
�rr
• Work sequence organized by pipeline section with installation schedule.
• Confirmation of liner length.
• Locations of all service connections with disposition for each.
�„ • Anticipated cleaning and preparation requirements.
• Sewer Service Interruption Notification Plan.
2. Manufacturer's certificate(s) indicating that the supplied lining materials meet the requirements
"�' of the Specifications,ASTM standards and a certificate of compliance from an independent third
party lab.
�, 3. Details on all lining materials and resins.
4. Name of resin supplier and liner fabric supplier.
� 5. Manufacturer's or Assembler's certification that the liner materials and system are in
compliance with the specifications, codes, and standards referenced in these specifications.
�r
133
�r.
09/08/2017 �
6. Test reports on testing of CIPP products �rfi
7. Manufacturer's or Assembler's recommendations for factory and field (whichever applies) wet
out procedures including: volume of resin per unit of liner, mixing ratios and procedures for
resin and catalyst/hardener, shelf life of resin, pot life of resin, required wet out procedure to �
ensure full saturation, and other criteria deemed necessary to ensure proper wet out of the
liner.
8. Manufacturer's or Assembler's data sheets for factory wet out and/or Contractor's data sheets �
for field wet out showing: quantity of resin and catalyst used for each length of liner, at or prior
to time of installation. -
�
9. Manufacturer's or Assembler's certification that all Manufacturer's or Assembler's wet out
recommendations have been followed on all lengths of CIPP which have factory wet out, at or
prior to time of installation. �
10. Manufacturer's or Assembler's recommendations for storage procedures and temperature
control, handling and inserting the liner, curing details, service connection methods, trimming
and finishing, and minimum equipment requirements to allow for an adequate installation. �
11. Manufacturer's or Assembler's recommendations and procedures for minimum and maximum
pressures,temperatures, and time durations to be used. �
12. Data on Contractor's equipment to be used on site including: type and tolerance of
temperature gages and thermocouples used to monitor cure temperature; type and tolerance of
equipment used to generate liner inversion pressure; make model, and technical data of all +�w►
equipment used to generate heat for the curing process; make, model and technical data of
backup equipment used to maintain curing temperature; rough size of vehicle(s) which carries
the CIPP pipe and installation equipment. �
13. Pipe sizing certified calculations demonstrating that the liner has been properly sized to avoid
the creation of wrinkles or folds.
�
14. Manufacturer or Assembler onsite Representative's Certification that the Contractor's
installation meets all requirements of the Manufacturer or Assembler and will not void the
Owner's warranty. �
15. CIPP field samples from previous field installations of the same resin system and tube materials
as proposed for the actual installation. Field sampling procedure shall be in accordance with the `
latest version of ASTM F1216 or ASTM F1743 and in accordance with ASTM D5813. �
16. Material Safety Data Sheets for resins, hardeners, catalysts, solvents, and all other compounds
or chemicals to be used on the job site. �
17. Data logger output in graphic format showing pipe section, time, pressure, and temperature
during activation, heating, curing, and cool down.
�
18. Informational hand out that describes the materials, processes, and odors associated with the
lining process. This handout shall be provided at the request of concerned residents. -
19. Post-Installation CCTV inspection videos. �
7-21.1(5) Quality Assurance
The Manufacturer or Assembler shall provide the following: �
1. List of inspection items that should be observed and recorded. Inspection items include pre-
�
134
�
'� 09/08/2017
+�• installation activities, product identification, installation procedures, equipment operations, and
post-installation activities.
2. Review all post-installation CCTV tapes of the installed liner. Following this review the
�` Manufacturer's or Assembler's representative shall provide certification to the Engineer
ensuring that the Contractor's installation meets the Manufacturer's or Assembler's
,.
requirements and will not void the warranty.
The finished CIPP shall be continuous over the entire length of an insertion run between two
manholes or access points and shall be free from visual defects such as foreign inclusions, dry spots,
,,,w pinholes, and de-lamination.
Wrinkles in the finished CIPP greater than 5 percent of the pipe diameter are unacceptable and shall
be removed and repaired by the Contractor at the Contractor's expense. Methods of repair shall be
�"' proposed by Contractor and submitted to the Engineer for review and approval.
7-21.1(6) Warranty
�" The Contractor shall warrant each mainline sewer lined with the specified product against defects in
materials, surface preparation, lining application, and workmanship for a period of 12 months from
the date of final acceptance of the project. The Contractor shall, within one month of written notice
"" thereof, repair defects in materials or workmanship that may develop during said 12-month period.
Defects shall be defined as: visible leakage of groundwater through the CIPP system, de-lamination
of any portion of the CIPP system as visible from CCTV inspection, or separation of any part of the
'�" CIPP system from the host pipe to the extent that the CIPP system inside diameter in the separated
area is 90 percent or less of the completed CIPP system inside diameter. The Contractor shall also
repair any damage to other work; damage to sewer system components (including pump stations)
"�' damages to buildings, houses or environmental damage caused by the backup of the sewer because
of the failure of the lining system or repairing of the same at the expense of Contractor, and without
cost to the Owner.
�
Repairs shall include removal of the existing liner and re-lining if possible, or excavation and
replacement of the section of pipe where the defect occurs.
`"r 7-21.2 Materials
7-21.2(1) Cured in Place Resin Impregnated Material in Genera)
�' The liner shall be designed for a "fully deteriorated" pipe condition in accordance with the
procedures of the latest edition of ASTM F1216, Appendix XI and these specifications. All material
properties used in design calculations shall be long-term (time-corrected) values. The Contractor
�" shall be familiar with the existing site conditions when preparing the liner design.
The CIPP will be continuous in length and the wall thickness shall be uniform. No overlapping
,,,,, sections shall be allowed in the circumference or the length of the liner.
The CIPP will be capable of conforming to offset joints, bells, and disfigured pipe sections. It shall be
able to stretch to fit irregular pipe sections and negotiate bends.
,�r
The CIPP resin shall be compatible with the liner fabric, other rehabilitation systems it may contact,
and the host pipe materials.
„� The CIPP shall be marked at a distance of regular intervals along its entire length, not to
exceed 5 feet. Markings shall include Manufacturer's or Assembler's name or identifying
symbol.
�
135
�
09/08/2017 �
The CIPP liner shall be manufactured with materials from a consistent supplier. All materials of �
similar type shall be from a single source for the entire project.
The composite materials of the liner tube and resin shall, upon installation inside the host pipe,
exceed the following minimum test standards, based on restrained sample cured in host pipe and '�'
flat plate sample:
1. �,
Physical Properties
Flexural Strength (ASTM D790) 4,500 psi
Flexural Modulus (ASTM D790) Short Term 300,000 psi �
Flexural Modulus(ASTM D2990) Long Term 150,000 psi
Tensile Strength (ASTM 1216 [pressure pipe only]) 3,000 psi
�
The CIPP shall be fabricated to a size that, when installed, will tightly fit the internal circumference
and length of the original pipe.
1. Allowance shall be made for circumferential and longitudinal stretching during the installation �
process.
2. Diametric shrinking during the curing process shall meet the requirements of ASTM D 5813, �
Section 6.3.1 or better.
The liner thickness shall be designed based on the engineering formulas listed in ASTM D638 and
F1216 for fully deteriorated pipes. The thickness shall be sufficient to prevent groundwater from �
entering the pipe,while maintaining the maximum cross-sectional pipe area possible.
Contractor shall prepare design calculations for approval prior to performing the lining work. The
submitted design calculations shall provide the following information as a minimum: r
1. Manhole to Manhole designation 5321-010 to 5321-009
2. Pipe Nominal Diameter (inches)
3. Minimum Liner thickness (inches) �
4. Proposed Liner Thickness (inches)
The following parameters shall be assumed for the liner design:
1. Modulus of soil reaction, E's= 1,500 psi (fully deteriorated) �
2. Unit weight of soil= 140 pcf _,
3. The minimum ovality for straight runs shall be 2.0 percent
4. AASHTO H20 traffic loads '�
5. AREMA E-80 railroad loads
6. Groundwater at the surface
7. Factor of Safety, N=2.0 �
For liners inserted by the inversion method, the CIPP shall be coated on one side with a translucent
waterproof coating of:
�
1. Polyvinyl chloride (PVC)
2. Polyurethane
For liners inserted by the pull/winch method,the CIPP shall be coated on one side with a translucent �'"
waterproof coating of:
1. Polyvinyl chloride (PVC) �
2. Polyurethane
3. Polyethylene
�
136
�
� 09/08/2017
�, 4. Polypropylene
7-21.2(2) Resin
�r► The resin/liner system shall meet the 10,000 hour test in accordance with Section 8.2.2 Test
Methods of ASTM D 5813.
,,,,r Prior to construction, the Contractor shall submit an infrared spectrum chemical fingerprint of the
type of resin to be used for this project.
7-21.2(3) Physical Properties
""� The CIPP shall be corrosion resistant to withstand ex osure to sewa e ases containin
p g g g quantities of
hydrogen sulfide, carbon monoxide, diluted sulfuric acid, and other chemical reagents typical of
sewage conveyance. Chemical resistance of the installed CIPP shall meet the chemical resistance
� requirements of ASTM D543 when subjected to the following solutions:
� Chemical Solution Concentration, percent
Tap Water (pH 6-9) 100
wr�
Nitric Acid 5
Phosphoric Acid 10
Sulfuric Acid 10
Gasoline 100
rrr
Vegetable Oil 100
Detergent 0.1
�
Soap 0.1
The hydraulic profile of the installed CIPP shall be maintained as large as possible. The CIPP shall
�
have at a minimum the full flow capacity of the original pipe before rehabilitation. Calculated
capacities may be derived using commonly accepted roughness coefficients for the existing pipe
material taking into consideration its age and condition.
�` Physical properties shall be subject to ASTM D 2122.
7-21.3 Construction Requirements
'r 7-21.3(1) Preparation
The Contractor shall make all necessary provisions to ensure service conditions and structural
�,r► conditions of host pipe are suitable for installation and warranty of the liner. The Contractor shall
verify the lengths in the field prior to ordering and prior to impregnation of the tube with resin, to
ensure that the tube will have sufficient length to extend the entire length of the run. The
�r Contractor shall also measure the inside diameter of the existing pipelines in the field prior to
ordering liner so that the liner can be installed in a tight-fitted condition.
7-21.3(1)A Flow Management
wr
It shall be the Contractor's responsibility to maintain operation of the existing sewer systems
throughout the duration of the project without any interruption of sewer service. The Contractor
�„� shall divert all flows around each segment of the pipe designated for rehabilitation. This diversion
shall consist of redirecting flow from an upstream manhole and discharging it to a manhole
downstream of the rehabilitation operation. This can be accomplished via a combination of
�
137
�
o9ioai2o�� �
pumping and/or gravity fiow. After the work is completed, flow shall be returned to the �
rehabilitated sewer system. The area affected by the bypass operation shall be fully restored.
Bypass pumping shall be scheduled for continuous operation. Back-up equipment shall be on-site
and available for periods of maintenance, refueling or failure of the primary bypass pump(s) or �
diversion system. Bypass pumping shall be done in such a manner as not to damage private or
public property, or create a nuisance or public menace. The bypass-pumping pipe shall not block
any driveways or intersections unless approved by the Engineer. The sewage shall be pumped �`"
through a watertight hose or pipe that is adequately protected from traffic. The discharge of raw
sewage to private property, city streets, sidewalks, storm sewer, or any location other than an
approved sanitary sewer is prohibited. The Contractor shall be liable for all cleanup, damages, and �
resultant fines should the Contractor's operation cause any backups or overflows.
The Contractor's bypass operation shall be sized to handle, at a minimum, the full pipe capacity in �,
each subject line removed from service. If flow conditions are greater than full pipe, the Contractor
may elect to wait for flow conditions to subside prior to removing the subject line from service.
Working days will not be charged for the period of time during which the flow is greater than full �
pipe. No additional payment will be made for periods of high flows during which the Contractor
elects to wait for lower flows. Once the Contractor removes a section of line from service he/she is
responsible to bypass any and all flow in the system during construction, even in the event the ,�
system surcharges and exceeds the full pipe capacity, until the line is returned to service.
All bypassing systems shall be approved by the Engineer. A plan for bypassing the existing sewer
system shall be submitted by the Contractor for review. The Contractor's plan for bypass pumping �
shall be satisfactory to the Owner before the Contractor will be allowed to commence bypass
pumping. The sewage bypass pumping plan shall include an emergency response plan to be
followed in the event of a failure of the bypass pumping. The review of the bypassing system and '�
equipment by the Engineer shall in no way relieve the Contractor of his responsibility and public
liability.
r�
The Contractor shall coordinate activities with impacted property owners. Property Owners shall be
notified that their side sewer will be out of service for a specified period of time, as approved by the
Engineer.
�
When there exist situations where impacted properties cannot be disconnected, plugged, or
subjected to any other service interruption, i.e., hospitals, care facilities, restaurants, etc., bypass
pumping of the side sewer to the downstream sanitary sewer system shall be required prior to �r+-
insertion of the liner system. The Contractor shall verify whether a property is able to be
interrupted prior to lining operations. If the subject property's side sewer requires bypass pumping,
the costs for the bypass pumping shall be covered by Force Account. w�
7-21.3(1)B Cleaning
Clean and prepare pipe per CIPP Manufacturer's or Assembler's requirements. �
7-21.3(1)C Point Repairs
Advise the Engineer of any point requiring repairs that can only be performed by excavating the �i.
defect and removing or repairing the obstruction.
Grout defects in the host pipeline including but not limited to open joints, fractures, cracks, and `
holes in the pipeline as follows: �
�
138
�
� o9ioaiaoi�
rr 1. Grout all defects as recommended by liner manufacturer or installer.
2. Grout all locations with active infiltration.
� The determination of an excessive leak shall be made by the Owner's representative and shall be
based on PACP leak designations. Leaks that would be categorized as a Runner(IR) — Severity 4 or
Gusher(IG) — Severity 5 shall be considered as excessive. Leaks categorized as Weeper(IW) —
r�r Severity 2 or Dripper(ID) — Severity 3 shall be considered incidental to the unit price for CIPP
rehabilitation.
Make point repairs of any host pipe defect that can be removed by conventional sewer cleaning
""' equipment or by remotely performed repair methods acceptable to the Engineer.
Remove protruding laterals, rolled gaskets, roots, mineral deposits, and other objects
�
protruding into the host pipe, internally with a remote controlled cutter.
Pipelines that cannot be rehabilitated due to excessive leakage may be deleted from the project at
the Engineers discretion.
� 7-21.3(1)D Manholes
Protect all manholes to withstand forces generated by the equipment while installing the liner.
�"` 7-21.3(2) Liner Installation
7-21.3(2)A Inversion Method
`� The impregnated tube shall be inserted through an existing manhole or other access point by means
of the Manufacturer's or Assembler's recommended installation process. The application of a
hydrostatic head, compressed air, or other means shall fully extend the liner to the next designated
'�` manhole or termination point and inflate and firmly adhere the liner to the pipe wall.
The liner shall be installed at a rate less than 10 feet per minute at all times.
"'�" Liner shall not be installed through intermediate manholes unless specifically requested in advance
in writing and approved by the Engineer.
,,,,,, Liner installation shall be in accordance with ASTM F 1216, Section 7.
When inversion is by hydrostatic head,the Contractor shall use methods that control the installation
rate, accounting for the increase in hydrostatic head in pipes that have significant elevation change.
�
7-21.3(2)B Pull/Winch Method
The impregnated tube shall be pulled into place within the host pipe with the aid of a power winch
"'F that is equipped with a device to monitor the force and prevent excessive tension and tube
elongation.
� The maximum allowable longitudinal elongation, or stretch, of the material shall be one (1) percent.
The longitudinal stretch of the tube shall be gauged by comparing marker on the fully inserted tube
to the actual length of pipe being rehabilitated.
� The Contractor shall use a flexible and impermeable calibration hose to inflate the tube. The
calibration hose may or may not remain in the complete installation. Hose materials remaining in
the installation shall be compatible with the resin system used, shall bond permanently with the
°� tube, and shall be translucent to facilitate post-installation inspection. Hose materials that are to be
removed after curing shall be of non-bonding material.
�
139
�
o9iosi2o�� �
Liner installation shall be in accordance with ASTM 1743, Section 6. �
7-21.3(2)C Finished Pipe Liner
The finished lining shall be continuous over the entire length of an installation run and be free of �
visual defects such as foreign inclusions, dry spots, pinholes, wrinkles, and de-lamination. The lining
shall be impervious and free of any leakage from the pipe to the surrounding ground or from the
ground to inside the lined pipe. �
Any defect, which will or could affect the structural integrity, strength, capacity, or future
maintenance of the installed liners, shall be repaired at the Contractor's expense, in a manner
approved by the Engineer. �
The beginning and end of the CIPP liner shall be cut flush at the inlet and outlet points in the
manhole, and the ends sealed with a resin mixture compatible with the liner/resin system and shall �
provide a watertight seal. Sealing material and installation method shall be submitted to and
approved by the Engineer prior to start of construction. Hydraulic cements and quick-set cement
products are not acceptable. �
7-21.3(3) Service Connection Restoration
Internally restore by using a pivot-headed CCTV camera and a remote cutting tool to locate the �'j
service connections from inside the lined pipe and cutting a hole matching the service connection
diameter. Provide a hole free from burrs or projections and with a smooth and crack-free edge. The
hole shall be 95 percent minimum of the original service connection interior diameter. The invert of ,�
the reinstated service opening shall match the invert of the service connection. Service connection
restoration shall be recorded on DVD disc and shall include a pan and tilt view of the entire lateral
circumference following cutting. �
Other methods may be used as approved by the Engineer.
7-21.3(4) Testing ��,
7-21.3(4)A Material Testing
Provide certified test results of the properties of the cured lining material from the actual installed �
CIPP at a minimum of one location per each liner insertion setup. The cured CIPP shall be sampled
and tested for flexural strength and flexural modulus in accordance with the requirements of ASTM
D790.
�
Liner thickness shall be determined at a minimum of three (3) locations on a cut section of the liner
using a method of ineasurement accurate to the nearest 0.005 inch. Wall thickness of samples shall
be determined as described in ASTM F1743, Section 8.1.6. The minimum wall thickness at any point �►
shall not be less than 87-1/2 percent of the design thickness.
7-21.3(4)B Field Testing �
Low Pressure Air Test: Mainlines without service connections shall be low pressure air tested in
accordance with Section 7-17 of these specifications. �
7-21.3(4)C Post Installation CCN Inspection
Following installation of the CIPP liner, reinstatement of the existing side sewer laterals and final �
trimming of the liner at the manholes/end of culverts, the new liner shall be inspected for defects
�
140 k
�
+� 09/08/2017
� using CCN cameras. The CCTV inspection shall meet the same requirements as the Pre-Installation
Inspection as specified in Section 7-20 of these special provisions.
The post-installation CCN inspection shall not be conducted until the side sewers have been
"�` reinstated and the cuttings from the reinstatement have been cleaned and removed. CCN
inspections performed by the Contractor at the time of the side sewer reinstatements will not be
accepted.
�.
7-21.4 Measurement
The length of sewer pipe CIPP rehabilitation will be the number of linear feet of completed
'"'"" installation measured along the invert and will include the length through elbows, tees and fittings.
The number of linear feet will be measured from the center of manhole to center of manhole.
,,,r Measurement for"CIPP Lateral Reinstatement"will be per each.
7-21.5 Payment
Measurement and Payment Schedule for X"Cured-in-Place Pipe (CIPP) and Reinstate CIPP Laterals
"`� is shown in Section 1-09.14
� 7-22 RESIN IMPREGNATED FABRIC CIPP
New Section
7-22.1 Description
�: This Section specifies rehabilitation of pipelines by the installation of resin-impregnated
fabric liners.
7-22.1(1) Related Work Specified Elsewhere
� General Specifications for Cured In Place Pipe (CIPP), Section 7-21.
7-22.2 Materials
� 7-22.2(1) Cured in Place Pipe Liner
The CIPP shall consist of one or more layers of flexible needled felt or an equivalent non-
woven material, or a combination of non-woven and woven materials capable of carrying
..� resin, withstanding installation and curing pressures, as required in ASTM F 1216, Section 5;
ASTM F 1743, Section 5; and ASTM D 5813, Sections 5, 6, and 8.
�
Seams in the CIPP shall be stronger than the non-seamed felt.
7-22.2(2) Resin
The resin shall be a chemically resistant isopthalic based polyester thermoset resin and
.rr catalyst system, or epoxy resin and hardener that is compatible with the installation
process. Vinyl Esters may be used, however, they shall only be used when specifically called
for by the Engineer. The resin should be able to cure both in the presence, and without the
presence of water, and the initiation temperature for cure should be less that 180 degrees
"� Fahrenheit. When properly cured the resin liner system shall meet the structural and
chemical resistance requirements of ASTM F1216 and ASTM F1743.
� The activated resin shall contain a colorant compatible with the resin, organic peroxides and
the installation and curing process, such as Creallova� CHROMA CHEM 844-7260 Phthalo-
Blue, or equivalent, at a level of 0.01-0.035 % by the weight of the resin. The colorant shall
be added concurrently with the organic peroxide activator solution, or immediately after
�rr adding it to the resin, to serve as a multi-purpose visual quality assurance indicator.
7-22.2(3) Physical Properties
.■
141
�
o9iosizo» � ,�
The wall color of the interior pipe surface of the CIPP after installation shall be a light �
reflective color.
7-22.3 Construction Requirements
7-22.3(1) Preparation �
7-22.3(1)A Cleaning
Clean and prepare pipe per CIPP Manufacturer's or Assembler's requirements. �,
7-22.3(2) Installation
7-22.3(2)A Resin Impregnation
The quantity of resin used for the fabric tube impregnation shall be sufficient to fill the r'�'
volume of all voids in the fabric tube material with additional allowances for polymerization
shrinkage and the loss of resin through cracks and irregularities in the host pipe wall.
A vacuum impregnation process shall be used. To insure thorough resin saturation
�
throughout the length of the felt tube the level of the vacuum and the speed of the resin
advance shall be coordinated so that white spots (dry areas) at the inside surface of the
flexible membrane shall be small, shallow, less than 10%of the fabric tube wall thickness or �i
3-mm, whichever is less, and be less than 1% of the volume of the resin per unit length.
A roller system shall be used to uniformly distribute the resin throughout the fabric tube. �
The roller gap dimension shall be calculated by a method that determines the correct
volume of resin/felt per foot contained within the confining perimeter of the flexible
membrane.
�
The "wet-out" fabric tube shall meet ASTM F 1216, 7.2 or ASTM F 1743, 6.2 as applicable,
and shall have a uniform thickness and excess resin distribution that when compressed at
installation pressures will meet or exceed the design thickness after cure.
�
No dry or unsaturated layers shall be acceptable upon visual inspection as evident by color
contrast between the felt fabric and the activated resin containing a colorant.
The person in charge of the "wet-out" process shall complete and sign a "wet-out" sheet for �`
each liner to be delivered to the site. The certified "wet-out" sheet shall include, but is not
limited to, "wet-out" date, resin identification, fabric tube length, diameter, and thickness.
The Contractor must submit to the Engineer the signed "wet-out" sheet for each liner ,�,
delivered to the site. Additionally,the Contractor shall submit a sample "wet-out" sheet
from a previous job for the Engineer's review prior to the start of the "wet-out" process for ,
the current project.
�
The Owner reserves the right to inspect all phases of production and testing of materials,
from manufacturing, shipping, "wet-out", installation, and cure, to finished product
Liners installed in pipe segments that contain a vertical or horizontal curve shall utilize the '�
inversion method only.
�
7-22.3(2)B Water, Air or Steam Curing
After placement of the liner is complete, provide a suitable heat source and distribution :
equipment. The equipment shall be capable of circulating hot water, air, and/or steam �
throughout the lined section in accordance with the Manufacturer's or Assembler's
recommendations to raise the temperature uniformly above the temperature required to
affect a resin cure. This temperature shall be determined by the Manufacturer or
Assembler based on the resin/hardener system employed. �
�
142
�
+rr, 09/08/2017
,,,,,,,, The heat source shall be fitted with continuous monitoring thermocouples to measure and
record the temperature of the incoming and outgoing water, steam, and/or air supply.
Water, steam, or air temperature during the cure period shall meet the requirements of the
resin Manufacturer or Assembler as measured and recorded at the heat source inflow and
� outflow return lines.
Provide standby equipment to maintain the heat source supply. The temperature during
the cure shall not be less than 130 degrees Fahrenheit at the boundary between the pipe
'""` wall and the liner unless otherwise directed by the Manufacturer or Assembler to meet
resin system requirements.
� Temperature shall be maintained during the curing period as recommended by the resin
Manufacturer or Assembler, and shall follow the heating schedule supplied by the
Manufacturer or Assembler.
+� A data logger shall record temperature, pressure, and time during activation, heating, and
curing.
7-22.3(2)C Cool Down
"� Cool the liner down to temperature specified by Manufacturer or Assembler following the
cure period for duration specified by Manufacturer or Assembler, prior to relieving static
head.
�` Care shall be taken to ensure that a vacuum is not induced which could damage the new
CIPP during the release of head on the new CIPP.
..� A data logger shall record temperature, pressure, and time during cool down.
7-23 RESIN IMPREGNATED FIBERGLASS CIPP
� New Section
7-23.1 Description
Contractor shall provide and install a resin impregnated fiberglass material tube with a
"� plastic coated wearing surface in all sewers identified for CIPP lining in accordance with
ASTM F 1216 and ASTM F 2019.
7-23.1(1) Related Work Specified Elsewhere
� General Specifications for Cured In Place Pipe (CIPP), Section 7-21.
7-23.1(2) Reference Specifications, Codes, and Standards
�,,, The following documents form a part of this specification to the extent stated herein and
shall be the latest editions thereof. Where differences exist between codes and standards,
the one affording the greatest protection shall apply, as determined by the City.
�
Reference Title
ASTM D 543 Test Method for Resistance of Plastics to Chemical Reagents
�` ASTM D 578 Standard Specification Glass Fiber Strands
ASTM D 638 Test Method for Tensile Properties of Plastics
+� ASTM D 790 Flexural Properties of Unreinforced and Reinforced Plastics and
Electrical Insulating Materials
�
ASTM D 883 Definitions and Terms Relating to Plastics
ASTM D 1600 Abbreviations, Acronyms, and Codes for Terms Relating to Plastics
�
143
.�.
09/08/2017 �'
ASTM F 412 Definitions of Terms relating to Plastic Piping Systems �C
ASTM F 1216 Rehabilitation of Existing Pipelines and Conduits by Inversion and
Curing of a Resin Impregnated Tube
ASTM F 2019 Standard Practice for Rehabilitation of Existing Pipelines and Conduits �
by the Pulled in Place Installation of Glass Reinforced Plastic (GRP)
Cured-in-Place Thermosetting Resin Pipe (CIPP) �
7-23.1(3) CIPP Liner Samples
The Contractor shall prepare samples of the installed CIPP liner for subsequent testing of its �
physical properties. Samples shall be prepared and tested using the flat plate sampling
method in accordance with the procedures in Section 8.1 of ASTM F 1216 or ASTM F 2019,
as is applicable. The sample will be constructed on the same materials (tube and �
resin/catalyst) as is used for that given liner installation. The flat plate sample shall be large
enough to provide five sample specimens for each Short Term Flexural (Bending) properties
as per ASTM D 790 and ASTM D 638 respectively.
�
The cured sample shall be tested by an independent testing laboratory, as recommended by
the CIPP liner manufacturer and approved by the Engineer, for the bending and tensile
properties, as per ASTM D 790 and ASTM D 638 respectively. Final payment will not be `
made until test results are received. The Contractor shall be responsible for any deviation �''
from the specified physical properties and those evaluated through testing. Failure to meet
the specified physical properties will result in the CIPP liner being considered defective work
which will be handled in accordance with Section 1-05 of the standard specifications. The ,�
Contractor shall be responsible for all costs associated with the testing of the liner physical
properties.
The above-stated sampling shall be performed for each separate installation of CIPP. For �,
example: one flat plate sample from each individual pipeline liner installed.
The wall thickness of the material tube shall be ordered to the next standard 1.0 mm
incremental thickness above the minimum calculated design thickness. Unless otherwise �`
specified to provide for excess resin migration, the gap thickness of the wetting-out
equipment shall be sized to allow an excess of 5 to 10 percent resin to pass during
impregnation. The minimum wall thickness shall be determined at a minimum of three �
locations on a cut section of the CIPP flat plate sample using a method of ineasurement
accurate to the nearest 0.005 inch.
7-23.1(4) CIPP Liner Handling �
Contractor shall exercise adequate care during transportation, handling, and installing to
ensure the CIPP material is not torn, cut, or otherwise damaged. If any parts of the CIPP
materials becomes torn, cut, or otherwise damaged before or during insertion, it shall be
repaired or replaced in accordance with the manufacturer's recommendations and approval �
by the Engineer before proceeding further; and at the Contractor's expense.
7-23.2 Materials
7-23.2(1) General Specifications �
All materials and installation procedures provided by the Contractor for use in the CIPP
installation process shall be equal to or exceed the requirements of Sections 5 and 7 of
ASTM F 1216 or ASTM F 2019 Section 5 and 6, as is applicable. �il
Wrinkles in the finished liner pipe which cause a backwater of one (1) inch or more or
reduce the hydraulic capacity of the pipe (wrinkles which exceed five (5) percent of the pipe
diameter) are unacceptable and shall be removed or repaired by the Contractor at no �
additional cost to the Owner. Wrinkles in the finished liner pipe that reduce the structural
stability of the pipe are unacceptable. If a void between the wrinkle and the pipe exists, the
�
144
�
� 09/08/2017
,�,,, Contractor shall repair or replace that section of the pipe at no additional cost to the
Owner. Methods of repair shall be proposed by the Contractor and submitted to the
Engineer for review.
�++ Contractor shall be responsible for control of all material and process variables to provide a
finished CIPP possessing the minimum properties specified in ASTM F 1216 or ASTM F 2019,
as is applicable and supplemented herein.
� 7-23.2(2) Chemical Resistance
The chemical resistance tests should be completed in accordance with Test Method ASTM D
543. Exposure should be for a minimum of one month at 73.4 degrees F. During this
� period, the CIPP test specimens should lose no more than 20 percent of their initial flexural
strength and flexural modulus when tested in accordance with Section 8 of ASTM F 1216 or
ASTM F 1743, whichever is applicable.
"�` The Contractor shall be responsible for all costs associated with the chemical resistance
tests.
,,,,,� Proof of ineeting these requirements shall be provided to the Engineer for approval at least
ten (10) days prior to commencement of work.
7-23.2(3) Component Properties
�"` The fiberglass tubing shall be made of non-corrosion material and shall be free from tears,
holes, cuts, foreign materials and other surface defects.
,,,,, The physical properties apply to CIPP manufactured polyester or vinylester resin. Resins
should be appropriate for conditions encountered.
7-23.2(4) Finished and Cured CIPP Liner Properties
"��" The physical properties of the cured CIPP shall have minimum initial test values as given in
Section 17-21. Properties for these or any other enhanced resins shall be substantiated
with test data.
�..
7-23.2(5) Dimensions
Contractor shall make allowances in determining the in-liner tube length and circumference
�,, for stretch during installation and shrinkage during curing. The minimum length shall be
that which continuously spans the distance from the center of the inlet manhole to the
center of the outlet manhole. The Contractor shall verify the lengths in the field before the
in-liner tube is cut and impregnated. Individual installation runs may include one or more
,� manhole-to-manhole sections as approved by the Engineer. Installation of the liner shall be
through existing or new manholes. Excavation for liner insertion shall not be permitted
except to replace the manhole cones, if necessary and/or required.
"'� The diameter of the existing pipes may be larger than the nominal inside diameter. It is the
Contractor's responsibility to determine the required diameter of the liner.
� The maximum wall thickness shall be at least the calculated design thickness, or the
minimum specified, to increase the diameter only as much as necessary.
7-23.3 Construction Requirements
� 7-23.3(1) Installation Procedures
It is forbidden to "wet-out" in-liner at the construction site because of external influences
such as heat, no possibilities to control vacuum and correct mixture of resin.
� The Contractor shall ensure that the pressure inside of the CIPP tube exceeds the outside
pressure due to groundwater.
�
145
�
09/08/2017 �
7-23.3(1)A Installation Process �;
The liner will be installed by the pull/winch method.
The Contractor has to make sure that at no time resin can come in contact to the
groundwater and cause environmental issues. Preparing the old pipe or inversion of a pre- �
liner is part of the installation and is included without any additional costs.
Before pulling the in-liner in, a protective foil has to be installed. The in-liner tube shall be
impregnated with resin and lowered into the manhole. The tube shall then be pulled into �
position within the existing pipe with the aid of a power winch that is equipped with a
device to monitor the force and prevent excessive tension and tube elongation as
determined by the liner manufacturer. The pipe shall then be inflated with air. The in-liner
has to be inspected immediately before starting the curing process. �
7-23.3(1)6 Curing
Pre-curing video inspection of the inflated liner must be recorded and the entire length of
the liner must be recorded including the liner section that the light chain occupies at any �
one time. Two cameras must be located on the light chain, one on the front and one on the
rear of the light chain to insure the entire length of the liner has been properly inflated. �
Curing must be done under UV — Light only. The curing process shall follow a step cure or �
similar approach recommended by the manufacturer and approved by the Engineer, and
shall be held at the top step for an adequate length of time as determined by the liner
manufacturer to ensure that the design physical properties are attained.
Pressure, temperature and curing process shall be monitored by both, computer and video
�
at any time as determined by the liner manufacturer.
7-23.3(2) Finished Product �Yi,
The finished CIPP shall be continuous over the entire length of an installation run.
Defects such as foreign inclusions, dry spots, pinholes, de-lamination, and wrinkling beyond
the specification allowances, determined by the Engineer as affecting the integrity or �
strength of the CIPP, or as adversely affecting the hydraulic capacity of the CIPP, shall be
repaired or replaced at the Contractor's expense.
8-02 ROADSIDE RESTORATION �
8-02.3(4)A Topsoil Type A
Section 8-02.3(4)A is supplemented with the following: ri�,
�******�
The contractor shall provide a material submittal for topsoil prior to use.
�
8-02.3(16) Lawn Installation
Section 8-02.3(16) is revised and supplemented as follows:
�******�
�
8-02.3(16)A Lawn Installation
Section 8-02.3(16)A has been deleted and superseded with the following:
�******�
�-
8-02.3(16)A1 Qualifications of Workmen
Provide at least one person who shall be present at all times during execution of the Work and who '�
shall be thoroughly familiar with the type of materials being installed and the best methods for their
installation and who shall direct all work performed under this section.
8-02.3(16)A2 Submittals �
�
146
�
�rr; 09/08/2017
,,,, 8-02.3(16)A2a Certification of Material
1. Include seed mix percentages, purity, germination rates, weed experience, and date tested
for the preceding. Include complete data on source, size and quality.
w
2. Supply on-site 12" x 12" sample of each sod specified for inspection and approval in advance
by the City.
""� 3. Supply Grower's written recommendations for fertilizer type, rate of application, and
frequency.
,�„�,, 4. All certificates required by law shall accompany shipments.
5. Upon completion of the installation and prior to final inspection, deliver all certificates to the
Engineer.
�
8-02.3(16)A2b Manufacturer's Certificates of Conformance
�' 1. Supply for Certificates of Conformance for fertilizer being used for the project.
8-02.3(16)A2c Schedule for Installation
� 1. The Contractor shall coordinate all work with the City and submit a watering plan for the
Establishment Period.
�
8-02.3(16)A3 Product Handling
Deliver all items to the site in their original containers, with all labels intact and legible, at the time
�* of the City's inspection. Coordinate delivery and installation of sod to ensure sod is installed
immediately upon delivery.
Use all means necessary to protect new lawn areas before, during, and after installation and to
�" protect the installed work and materials of all other trades.
In the event of damage or rejection, immediately make all repairs and replacements necessary for
,;�, the approval of the Inspector and at no additional cost to the City.
8-02.3(16)A4 Site Information
� If sod is stored onsite, preserve and protect all sod on site prior to and during installation. Protect
from wind, drought, unusual weather and vandalism.Store all sod on site within limits of work.
Protect adjacent property, public walks, curbs and pavement from damage. Do not block public
"""" access routes with plant material.
8-02.3(16)A5 Sod
�
The Contractor shall provide sod to all new lawn areas and to those lawn areas requiring restoration
from the Contractor's operations. Sod shall conform to section 9-14.6(8) as shown in the Special
Provisions.
�
8-02.3(16)A5a Other Materials
� All other materials not specifically described but required for a complete and proper planting
installation,shall be selected by the Contractor subject to the approval of the Engineer.
r�
147
�w
09/08/2017 �
8-02.3(16)A6 Execution �
Prior to all work of this section, carefully inspect the installed work of all other trades and verify that
all such work is complete to the point where this installation may properly commence. Verify that
lawn installation may be completed in accordance with the original design and the referenced �
standards. In the event of discrepancy, immediately notify the Engineer for specific instructions.
8-02.3(16)A6a Installation Preparation �`
1. Prepare subgrade in all lawn areas by scarifying to a 8" minimum depth and removing rocks
and debris over 1" in diameter. Subgrade soils should be free-draining and without any �,
impervious soils or other materials harmful to plant growth. Notify the Inspector of any
subgrade conditions deleterious to plant growth.
2. Spread topsoil to a minimum depth of 6" after settlement in all lawn areas. �'
3. Thoroughly rototill topsoil to a minimum depth of 6 inches.
4. Fine grade per Contract Specifications in turf areas as indicated on drawings. Rake entire �
surface to conform to site grading. Grade edges to 1" below adjacent paved surfaces to
provide a smooth transition. Roll as necessary to firm grade to satisfaction of the Inspector.
�+
5. Apply fertilizer to the prepared lawn areas at rates recommended by sod grower and lightly
rake to incorporate into the soiL
8-02.3(16)A6b Sod Installation '�
1. Moisten sod bed and roll lightly for compaction.
2. Lay sod strips per supplier's instructions. Tightly butt joints, trim edges to conform to �
smooth curves and straight lines of pavement. Sod is to be flush with paved surfaces after
settlement. Avoid gaps and overlaps and stagger sod joints in a brick-like fashion.
�
3. Remove any bumps, undulations,or low-high spots with a light rolling.
4. Water daily for a minimum of two weeks to prevent dehydration. <
�,
5. Protect all turf areas by erecting temporary fences, barriers, signs, etc. as necessary to
prevent trampling.
6. Do not work in, over, or adjacent to planting areas without proper protection and �
safeguards.
8-02.3(16)B Lawn Establishment �
Section 8-02.3(16)B has been deleted and superseded with the following:
�******�
8-02.3(16)B Lawn Establishment and Final Acceptance �
The Contractor shall maintain all new lawn areas in this project; shall be responsible for the survival
of turf in acceptable condition and shall maintain all new lawn areas in a neat and orderly fashion �
until Final Acceptance of the project by the City. The period for Final Acceptance shall be no sooner
than the second mowing. The Contractor will be held responsible for all damage or loss caused by
his inattention or carelessness. The Contractor shall repair damage caused by traffic, vandalism, �
weather or other outside causes.
�
148
�
�t 09/08/2017
;�,, 8-02.3(16)B1 Establishment Period
The Establishment Period will commence on the date of Preliminary Acceptance and will extend to
,,,, Substantial Completion or Final Acceptance by the City of landscape work, whichever is later.
Maintenance during this period will include:
�,,,, 1. Watering: Water areas of new turf so they receive adequate water for survival of the plant
in a healthy position.
„� 2. Lawns shall be fertilized every six weeks from March through September per Grower's
written recommendations. Lawns shall be maintained weed-free.
„�, 3. Lawns are to be mowed weekly or as needed to maintain a neat appearance. All grass
clippings shall be removed from the site. Maximum height of lawn shall not exceed three
inches.
�
4. Protect all lawn areas against damage, including erosion and trespassing, by providing and
maintaining proper safeguards.
�
5. Debris Control: Debris control shall be accomplished in all landscaped lawn areas on a
regular basis, at least weekly or more often where necessary. This will include leaf fall
,�,�„ control in Fall period. Policing for paper and litter in all areas shall be conducted at least
weekly. During the Fall period leaves,windblown into gutters and catch basins, are
considered as litter and shall be removed as debris.
�.
8-02.3(16)62 Guarantee
�
All new turf areas shall be guaranteed by the Contractor to be in a healthy condition for a period of
one year from the date of Final Acceptance.
8-02.3(16)63 Final Acceptance
�
Acceptance of lawn planting as specified shall be based on a uniform stand of grass and a uniform
grade at the time of final inspection.
�
Final inspection of the work of the Section will be made at the time of the Final Inspection of the
entire project or earlier, if approved by the Engineer. A final punch list will be issued. Final
"`� Acceptance of the new turf areas which are the responsibility of the Contractor will be contingent
upon Final Acceptance of the entire project or at the determination of the City if earlier than Final
Acceptance of the entire project.
s
� 8-09 RAISED PAVEMENT MARKERS
8-09.5 Payment
w� Section 8-09.5 has been revised as follows:
�******�
Payment will be made for each of the following bid items that are included in the proposal:
�
149
,r�r
09/08/2017 �
"Raised Pavement Marker Type 1", per each. �
"Raised Pavement Marker Type 2", per each.
"Raised Pavement Marker Type 3- In.", per each.
"Recessed Pavement Marker", per each.
The unit contract price per each for "Raised Pavement Marker Type 1", "Raised Pavement Marker �
Type 2", and "Raised Pavement Marker Type 3- In:' and "Recessed Pavement Marker" shall be
full pay for all labor, materials, and equipment necessary for furnishing and installing the markers in
accordance with these Specifications, including all cost involved with traffic control unless traffic �
control is listed in the Contract as a separate pay item.
�
8-13 MONUMENT CASES
8-13.1 Description �'
Section 8-13.1 is revised and supplemented as follows:
�******� ;
This Work shall consist of furnishing and placing monument cases and covers, in accordance with the ,�
Standard Plans and these Specifications, in conformity with the lines and locations shown in the
Plans or as staked by the Engineer or by the Contractor supplied Surveyor.
8-13.3 Construction Requirements �
Paragraphs 2 and 3 of Section 8-13.3 is revised and supplemented as follows:
�******�
The monument will be furnished and set by the Engineer or by the Contractor supplied Surveyor. �
When existing monuments will be impacted by a project, the Contractor shall be responsible for
assuring that a registered surveyor references the existing monuments prior to construction. After
construction is complete,the monuments shall be re-established by the Surveyor in accordance with j�
RCW58.09.130.
8-13.4 Measurement
Section 8-13.4 is supplemented by adding the following: �
�******�
All costs for surveying and resetting existing monuments impacted by construction shall be
considered incidental to the Contract unless specifically called out to be paid as a bid item.
1�
8-13.5 Payment
Section 8-13.5 is supplemented by adding the following:
�******� �
"Reset Existing Monument" per each.
Resetting an existing monument impacted by construction shall be incidental unless included as a
pay item in the Schedule of Prices. �
8-14 CEMENT CONCRETE SIDEWALKS
�
8-14.3(4) Curing
Section 8-14.3(4) is replaced with:
�******) �
The curing materials and procedures outlined in Section 5-05.3(13) of the Standard Specifications
shall prevail, except that white pigmented curing compound shall not be used on sidewalks. The
curing agent shall be applied immediately after brushing and be maintained for a period of 5 days.
�
The Contractor shall have readily available sufficient protective covering, such as waterproof paper
or plastic membrane, to cover the pour of an entire day in the event of rain or other unsuitable
�
150
�
� 09/08/2017
� weather. During the curing period, all traffic, both pedestrian and vehicular, shall be excluded.
Vehicular traffic shall be excluded for such additional time as the Engineer may specify.
The Contractor shall be responsible for barricading, patrolling, or otherwise protecting the newly
�" placed concrete to prevent damage. Damaged, vandalized, discolored, stained, or unsightly concrete
shall be removed and replaced at the expense of the Contractor.
8-14.4 Measurement
�` Section 8-14.4 is supplemented by adding the following:
�******�
When the Contract contains a pay item for "Curb Ramp, Cement Concrete," the per each
�,. measurement shall include all costs for the complete installation per the Plans and standard details
including expansion joint material, curb and gutter and ramped sidewalk section. Sawcutting,
removal and disposal of excavated materials including existing pavement and sidewalk, crushed
surfacing base materials and all other Work, materials and equipment required per Section 8-14,
� shall be included in the per each price for "Curb Ramp, Cement Concrete" unless any of these other
items are listed and specified to be paid as separate pay items.
If the Contract does not provide a pay item for"Curb Ramp, Cement Concrete," but the Plans call for
`�`' such installation, then quantities shall be measured with and paid for under the bid items for Curb
and Gutter and for Cement Concrete Sidewalk. When curb ramps are to be constructed of asphalt
concrete, the payment shall be included in the pay item for "Miscellaneous and/or Driveway Asphalt
�,,, Concrete."
5-14.5 Payment
Section 8-14.5 is supplemented by adding the following:
,�„ �******�
"Curb Ramp, Cement Concrete," per each.
Payment for excavation of material not related to the construction of the sidewalk but necessary
'r` before the sidewalk can be placed, when and if shown in the Plans, will be made in accordance with
the provisions of Section 2-03. Otherwise, the Contractor shall make all excavations including haul
and disposal, regardless of the depth required for constructing the sidewalk to the lines and grades
�; shown, and shall include all costs thereof in the unit contract price per square yard for "Cement
Concrete Sidewalk" and the per each contract price for"Curb Ramp, Cement Concrete:'
8-17 IMPACT ATTENUATOR SYSTEMS
,�
8-17.5 Payment
Section 8-17.5 is supplemented by the following:
� �******�
If no pay item is included for temporary impact attenuators then all costs to provide and install shall
be considered a part of the pay item for"Traffic Control."
�
8-20 ILLUMINATION,TRAFFIC SIGNAL SYSTEMS, AND ELECTRICAL
'�"c 8-20.2(1) Equipment List and Drawings
�******�
Paragraph four of Section 8-20.2(1) is revised and supplemented with the following:
� The Contractor shall submit for approval six sets of shop drawings for each of the following types of
standards called for on this project:
1. Light standards with or without pre-approved Plans.
2. Signal standards with or without pre-approved Plans.
�r. 3. Combination Signal and lighting standards.
4. Metal Strain Poles.
�
151
:rr
09/08/2017 �
Paragraph five of Section 8-20.2(1) is deleted. �
Paragraph six of Section 8-20.2(1) is deleted.
Section 8-20.2(1) is supplemented as follows: �
The Contractor also shall submit either on the signal standard shop drawings or attached to the
signal standard shop drawings all dimensions to clearly show the specific mast arm mounting height
and signal tenon locations for each signal pole to be installed. �
8-22 PAVEMENT MARKING
�
8-22.1 Description
The following item in Section 8-22.1 is revised as follows:
�******�
Crosswalk Stripe �
A SOLID WHITE line, 8 inches wide and 10-feet long, installed parallel to another crosswalk stripe and
parallel to the direction of traffic flow and centered in pairs on lane lines and the center of lanes.
See detail sheet. �
Skip Center Line (Replacement)
A BROKEN YELLOW line 4 inches wide. The broken or"skip" pattern shall be based on a 24-foot unit
consisting of a 9-foot line and a 15-foot gap. Skip center strip is used as centerline delineation on �
two-lane or three-lane,two-way highways.
Double Yellow Center Line (Replacement)
Two SOLID YELLOW lines, each 4 inches wide, separated by a 4-inch space. Double yellow center �
stripe is used as centerline delineation on multilane,two-way highways and for channelization.
Approach Line (New) �
A SOLID WHITE line, 8 inches wide, used to separate left and right turning movements from through
movements, to separate high occupancy vehicle lanes from general-purpose lanes, for islands, hash
marks, and other applications. Hash mark stripes shall be placed on 45-degree angle and 10 feet
apart. 11�"
Lane Line (Replacement)
A BROKEN WHITE line, 4 inches wide, used to delineate adjacent lanes traveling in the same
direction.The broken or"skip" pattern shall be based on a 24-foot unit consisting of a 9-foot line and �
a 15-foot gap.
Two Way Left Turn Line (Replacement) �
A SOLID YELLOW line, 4 inches wide, with a BROKEN YELLOW line, 4 inches wide, separated by a
4-inch space.The broken or "skip" pattern shall be based on a 24-foot unit consisting of a 9-foot line
and a 15-foot space. The solid line shall be installed to the right of the broken line in the direction of
travel. �
Crosswalk Line (Replacement)
A SOLID WHITE line, 8 inches wide and 10 feet long, installed parallel to another crosswalk stripe and "
parallel to the direction of traffic flow and centered in pairs on lane lines and the center of lanes. �
See detail sheet.
Stop Line (Replacement) �
A SOLID WHITE line 12, 18, or 24 inches wide as noted on the Contract Plans.
8-22.3(5) Installation Instructions
Section 8-22.3(5) is revised as follows: �
�******�
A manufacturer's technical representative need not be present at the initial material installation to
�
152
�
� 09/08/2017
;� approve the installation procedure.
8-22.5 Payment
Section 8-22.5 is supplemented as follows:
,rr �******�
"Approach Stripe;' per linear foot.
� "Remove Paint Line ....."wide," per linear foot.*
"Remove Plastic Line ......" Wide," per linear foot.*
� "Remove existing traffic markings, "per Lump Sum.*
*The linear foot contract price for"Remove Paint Line" and "Remove Plastic Line" and the lump sum
contract price for "Remove existing traffic markings" shall be full compensation for furnishing all
�° labor, tools, material, and equipment necessary for removal of existing traffic markings as per the
Plans, Specifications and detail sheets. If these pay items do not appear in the contract schedule of
prices, then the removal of old or conflicting traffic markings required to complete the
� channelization of the project as shown on the Plans or detail sheets shall be considered incidental to
other items in the Contract and no further compensation shall be made.
8-23 TEMPORARY PAVEMENT MARKINGS
�
8-23.5 Payment
Section 8-23.5 is supplemented with the following:
�******�
'�'� If no pay item is included in the Contract for installation, or for removal of temporary pavement
markings, then all costs associated with these items are considered incidental to other items in the
Contract or included under"Traffic Control," if that item is included as a bid item.
�` 9-03.8(7) HMA Tolerances and Adjustments
Item 1 is deleted and replaced with:
�******�
"'� 1. Job Mix Formula Tolerances. After the JMF is determined as required in 5-04.3(7)A, the
constituents of the mixture at the time of acceptance shall conform to the following tolerances:
Nonstatistical Commercial
"" Evaluation Evaluation
Aggregate, percent passing
1", %", %z", and 3/8"sieves ±6% ±g/o
''"` U.S. No.4 sieve ±6% ±g/
U.S. No. 8 sieve ±6�/ +g�
U.S. No. 16 sieve ±4% ±6/
'�` U.S. No. 30 sieve ±4/ +6�
U.S. No. 50 sieve ±4/ +6�
�
U.S. No. 100 sieve ±3/ ±5�
U.S. No. 200 sieve ±2,0% ±3.0%
Asphalt Binder ±0.5% ±0,7/
�
VMA 1.5% below minimum value in 9-03.8(2)
VFA minimum and maximum as listed in 9-03.8(2)
Va 2.5% minimum and 5.5%maximum
�
These tolerance limits constitute the allowable limits as described in Section 1-06.2. The tolerance
limit for aggregate shall not exceed the limits of the control point's section, except the tolerance
�
153
�r.
o9ioai2o i� �
limits for sieves designated as 100% passing will be 99-100. �
9-03.22 Cement-based Grout for Abandoning Existing Utilities (Additional Section)
Section 9-03.22 is a new section: "�
�******)
The Contractor shall submit a mix proposal that has flow characteristics appropriate for filling a
utility pipeline.The mix proposal for"Cement-base Grout for Abandoning Existing Utilities" shall be �
approved by the Engineer prior to commencing work on this item.
Cement-based Grout for Abandoning Existing Utilities shall be equal to a 1-sack mix and the
materials shall conform to the following: �
Cement:This material shall be Portland cement as specified in section 9-01.
Aggregate:This material shall meet the requirements for fine aggregate as specified in section 9-
03.1. '�
Water: Water shall conform to the provisions of Section 9-25.1.
Minimum Strength: 100 psi
a�r
9-05 DRAINAGE STRUCTURES, CULVERTS, AND CONDUITS
�
9-05.4 Steel Culvert Pipe and Pipe Arch (RC)
Section 9-05.4 is revised as follows:
�******�
Steel culvert pipe and pipe arch shall meet the requirements of AASHTO M 36, Type I and Type II. �;i
Welded seam aluminum coated (aluminized) corrugated steel pipe and pipe arch with metallized
coating applied inside and out following welding is acceptable and shall be asphalt treatment coated.
9-05.7(2) Reinforced Concrete Storm Sewer Pipe (RC) '�
Section 9-05.7(2) is replaced by the following:
�******�
Reinforced Concrete Storm Sewer pipe shall conform to the requirements of ASTM C-76 and shall be �
Class IV. Cement used in the manufacture of reinforced concrete pipe shall be Type II in conformance
with ASTM C150. No admixture shall be used unless otherwise specified.
9-05.7(2)A Basis for Acceptance (RC) �
Section 9-05.7(2)A is supplemented by the following:
�******� .
All pipe shall be subject to (1) a three-edge-bearing strength (D-load) test in accordance with ASTM
C76; and (2) a hydrostatic test of rubber gasket joints in accordance with ASTM C361 or AWWA C302 �
except test pressure shall be 5 psi.
9-05.7(3) Concrete Storm Sewer Pipe Joints (RC) ,��;
Section 9-05.7(3) is replaced by the following:
�******�
Joint assembly design shall be reinforced concrete bell and spigot type incorporating a fully retained
single rubber gasket in accordance with ASTM C361 or AWWA C302. Rubber gasket material shall be �rt;
neoprene.
9-05.7(4) Testing Concrete Storm Sewer Pipe Joints (RC) �
Section 9-05.7(4) is supplemented by the following:
�******�
Hydrostatic testing of rubber gasket joints shall be performed in accordance with ASTM C361 or
AWWA C302 except test pressure shall be 5 psi. �
9-05.9 Steel Spiral Rib Storm Sewer Pipe (RC)
Section 9-05.9 is replaced with:
�
154
�
� 09/08/2017
� �******�
The manufacturer of spiral rib storm sewer pipe shall furnish the Engineer a Manufacturer's
Certificate of Compliance stating that the materials furnished comply in all respects with these
Specifications. The Engineer may require additional information or tests to be performed by the
�"' Contractor at no expense to the City.
Unless otherwise specified, spiral rib storm sewer pipe shall be furnished with pipe ends cut
� perpendicular to the longitudinal axis of the pipe. Pipe ends shall be cut evenly. Spiral rib pipe shall
be fabricated either by using a continuous helical lock seam or a continuous helical welded seam
paralleling the rib.
,,,, Steel spiral rib storm sewer pipe shall be manufactured of inetallic coated (aluminized or galvanized)
corrugated steel and inspected in conformance with Section 9-05.4. The size, coating, and metal
shall be as shown in the Plans or in the Specifications.
�' For spiral rib storm sewer pipe, helical ribs shall project outwardly from the smooth pipe wall and
shall be fabricated from a single thickness of material. The ribs shall be essentially rectangular and
shall be 3/4 inch plus two times the wall thickness (2t) plus or minus 1/8 inch (measured outside to
� outside) and a minimum of 0.95 inch high (measured as the minimum vertical distance from the
outside of pipe wall immediately adjacent to the lockseam or stiffener to the top surface of rib). The
maximum spacing of the ribs shall be 11.75 inches center to center (measured normal to the
direction of the ribs). The radius of bend of the metal at the corners of the ribs shall be a minimum
„r� of 0.10 inch and a maximum of 0.17 inch. If the sheet between adjacent ribs does not contain a
lockseam, a stiffener shall be included midway between ribs, having a nominal radius of 0.25 inch
and a minimum height of 0.20 inch toward the outside of the pipe. Pipe shall be fabricated with
ends that can be effectivelyjointed with coupling bands.
�
When required, spiral rib or narrow pitch spiral rib pipe shall be bituminous treated or paved. The
bituminous treatment for spiral rib pipe shall conform to the requirements of Sections 9-05.4(3) and
�
9-05.4(4).
For narrow pitch spiral rib sewer pipe, the helical ribs shall project outwardly from the smooth pipe
wall and shall be fabricated from a single thickness of material. The ribs shall be .375 inch + 1/8 inch
,;�, wide (measured outside to outside) and a minimum of .4375 inch high (measured as the minimum
vertical distance of ribs shall be 4.80 inches center to center (measured normal to the direction of
the ribs). The radius of bend of the metal at the corners of the ribs shall be 0.0625 inch with an
allowable tolerance of+ 10 percent.
�
9-05.12 Polyvinyl Chloride (PVC) Pipe
Section 9-05.12(3) is a new additional section:
�r
�******�
9-05.12(3) CPEP Sewer Pipe
Section 9-05.12(3) is a new additional section:
nr (******)
CPEP - Smooth interior pipe and fittings shall be manufactured from high density polyethylene resin
which shall meet or exceed the requirements of Type 111, Category 4 or 5, Grade P33 or P34, Class C
� per ASTM D1248. In addition, the pipe shall comply with all material and stiffness requirements of
AASHTO M294.
9-05.14 ABS Composite Sewer Pipe
+rr Section 9-05.14 is deleted
�******�
9-05.17 Aluminum Spiral Rib Storm Sewer Pipe
°� Section 9-05.17 is replaced with:
�******�
Unless otherwise specified, spiral rib storm sewer pipe shall be furnished with pipe ends cut
�
155
r�rr
o9iosi2oi�
�
perpendicular to the longitudinal axis of the pipe. Pipe ends shall be cut evenly. Spiral rib pipe shall �
be fabricated by using a continuous helical lock seam with a seam gasket.
For spiral rib storm sewer pipe, helical ribs shall project outwardly from the smooth pipe wall and
shall be fabricated from a single thickness of material. The ribs shall be 3/4 inch wide by 3/4 inch �
deep with a nominal spacing of 7-1/2 inches center to center. Pipe shall be fabricated with ends that
can be effectively jointed with coupling bands.
For narrow pitch spiral rib storm sewer pipe, helical ribs shall project outwardly from the smooth �
pipe wall and shall be fabricated from a single thickness of material. The ribs shall be 0.375 inch +
1/8 inch wide (measured outside to outside) and a minimum spacing of ribs shall be 4.80 inches
center to center (measured normal to the direction of the ribs). The radius of bend of the metal at ,�
the corners of the ribs shall be 0.0625 inch with an allowable tolerance of+ 10 percent.
For wide pitch spiral rib storm sewer pipe, helical ribs shall project outwardly from the smooth pipe '
wall and shall be fabricated from a single thickness of material. The ribs shall be 3/4 inch + 1/8 inch �
wide (measured outside to outside) and a minimum of 0.95 inch high (measured as the minimum
vertical distance from the outside of pipe wall to top surface of the rib). The maximum spacing of
ribs shall be 11.75 inches center to center (measured normal to the direction of the ribs). The radius �
of bend of the metal at the corners of the ribs shall be 0.0625 inch with an allowable tolerance of±
10 percent. ,
9-05.20 Corrugated Polyethylene Storm Sewer Pipe (CPEP) �
Section 9-05.19 is replaced with the following:
�******�
r�ii
9-05.20(1) Description
Corrugated Polyethylene Pipe (CPEP) shall be corrugated high-density polyethylene pipe with
smooth internal wall manufactured by Advanced Drainage Systems (ADS), or approved equivalent. �
9-05.20(2) Pipe Material and Fabrication
CPEP shall be in conformance with the latest version of ASTM F 667 or AASHTO M 294,Type S. �
9-05.20(3) Fittings and Gaskets
Fittings shall be gasketed PVC fittings. Gaskets shall conform to ASTM F 477. Fittings shall conform ;
to ASTM F 1536 or ASTM D 3212. Fittings shall be manufactured by Nyloplast USA, Inc., or approved �
equivalent.
9-05.20(4) Installation �
Pipe and fittings shall be installed per the manufacturer's recommendations. Lubricate gasket and
fitting socket with manufacturer-approved lubricant prior to pushing pipe into fitting. s
�ri
9-05.22 High Density Polyethylene Piping
Section 9-05.22 is a new section: �
�******�
DRISCOPLEXT""4100 High-density Polyethylene Piping `
�
1 General Terms and Conditions
1.1 Scope-This Specification covers requirements for DriscoPlexT""4100 PE 3408 high-density �
polyethylene piping. All Work shall be performed in accordance with these Specifications.
�
156
�
�' 09/08/2017
llli
1.2 Engineered and Approved Plans-Construction shall be performed in accordance with
Engineered Construction Plans for the Work prepared under the direction of a Professional Engineer.
r�
1.3 Referenced Standards-Where all or part of a federal,ASTM,AN51,AWWA, etc., Standard
Specification is incorporated by reference in these Specifications,the reference standard shall be the
r latest edition and revision.
1.4 Licenses and Permits—The Contractor shall be licensed and bonded.
�
1.5 Inspections-All Work shall be inspected by an Authorized Representative of the City who shall
have the authority to halt construction if, in his opinion,these Specifications or standard
+rr construction practices are not being followed. Whenever any portion of these Specifications is
violated,the Engineer shall, by written notice, order further construction to cease until all
deficiencies are corrected.
�
2 Polyethylene Pipe and Fittings
�
2.1 Qualifications of Manufacturers - The manufacturer shall have manufacturing and quality
assurance facilities capable of producing and assuring the quality of the pipe and fittings required by
�ri these Specifications. The manufacturer's production facilities shall be open for inspection by the
City or his Authorized Representative. The Project Engineer shall approve qualified manufacturers.
r�r 2.2 Materials- Black PE materials used for the manufacture of polyethylene pipe and fittings shall be
PE 3408 high density polyethylene, meeting ASTM D 3350 cell classification 345464C and shall be
listed in the name of the pipe and fitting manufacturer in PPI (Plastics Pipe Institute) TR-4, with a
�r standard grade HDB rating of 1600 psi at 73°F. Color material, when used, shall be the same except
for meeting ASTM D 3350 cell classification 345464E. The material shall be listed and approved for
potable water in accordance with NSF Standard 61. When requested on the order, the manufacturer
�rr shall certify that the materials used to manufacture pipe and fittings meet these requirements.
2.3 Interchangeability of Pipe and Fittings - The same qualified and approved manufacturer shall
�r produce polyethylene pipe and fittings. Products such as fittings or flange adapters made by sub-
contractors or distributors are prohibited.
.r� 2.4 Polyethylene Fittings & Custom Fabrications - Polyethylene fittings and custom fabrications shall
be molded or fabricated by the approved pipe manufacturer. All fittings and custom fabrications
shall be pressure rated for the same internal pressure rating as the mating pipe.
�
2.5 Molded Fittings - Molded fittings shall be manufactured and tested in accordance with ASTM D
3261 and shall be so marked. Molded fittings shall be tested in accordance with AWWA C906.
�
2.6 Fabricated Fittings - Fabricated fittings shall be made by heat fusion joining specially machined
shapes cut from pipe, polyethylene sheet stock or molded fittings. Fabricated fittings shall be rated
rrr for internal pressure service at least equal to the full service pressure rating of the mating pipe.
Fabricated fittings shall be tested in accordance with AWWA C906.
�tw
157
rrr
09/08/2017 �
2.7 Polyethylene Flange Adapters - Flange adapters shall be made with sufficient through-bore �
length to be clamped in a butt fusion-joining machine without the use of a stub-end holder. The
sealing surface of the flange adapter shall be machined with a series of small v-shaped grooves
(serrations)to promote gasketless sealing,or restrain the gasket against blowout. „r,
2.8 Back-up Rings & Flange Bolts - Flange adapters shall be fitted with back-up rings that are
pressure rated equal to or greater than the mating pipe. The back-up ring bore shall be chamfered �
or radiused to provide clearance to the flange adapter radius. Flange bolts and nuts shall be Grade 3
or higher.
�
9-05.24 Polypropylene Culvert Pipe, Polypropylene Storm Sewer Pipe, and Polypropylene
Sanitary Sewer Pipe
This sections content is deleted and replaced with the following: +�r�i
�******�
All joints for polypropylene pipe shall be made with a bell/bell or bell and spigot coupling and shall
conform to ASTM D 3212 using elastomeric gaskets conforming to ASTM F 477. All gaskets shall be �rr
factory installed on the pipe in accordance with the producer's recommendations.
Qualification for each producer of polypropylene storm sewer pipe requires joint system �i
conformance to ASTM D 3212 using elastomeric gaskets conforming to ASTM F 477 and a formal
quality control plan for each plant proposed for consideration.
�
A Manufacturer's Certificate of Compliance shall be required and shall accompany the materials
delivered to the project. The certificate shall clearly identify production lots for all materials
represented. The Contracting Agency may conduct verification tests of pipe stiffness or other r,r�i
properties it deems appropriate.
This section is supplemented with the following new sub-sections:
�
9-05.24(1) Polypropylene Culvert Pipe and Storm Sewer Pipe
Polypropylene culvert and storm sewer pipe shall conform to the following requirements:
�
1. For dual wall pipe sizes up to 30 inches:ASTM F2736.
2. For triple wall pipe sizes from 30 to 60 inches: ASTM F2764.
r
3. For dual wall profile pipe sizes 36 to 60 inches:AASHTO MP 21,Type S or Type D.
4. Fittings shall be factory welded, injection molded or PVC.
�
9-05.24(2) Polypropylene Sanitary Sewer Pipe '
Polypropylene sanitary sewer pipe shall conform to the following requirements: �
1. For pipe sizes up to 30 inches: ASTM F2736.
2. For pipe sizes from 30 to 60 inches: ASTM F2764. �
3. Fittings shall conform to ASTM F2764. Bell & spigot connections shall utilize a spun-
On, welded or integral bell and spigot with gaskets meeting ASTM F477. Fitting joints
shall be watertight joint performance requirements of ASTM D3212. �
w�
158
�
+� 09/08/2017
�• 9-05.52 Dense Foam
Section 9-05.52 is a New Section as follows:
(******�
� Dense foam shall be Ethafoam HS 600 high density, polyethylene foam, as manufactured by Dow
Chemical Company, or approved equivalent.
�
9-08 PAINTS
� 9-08.8 Manhole Coating System Products
Section 9-08.8 is a new section and subsections:
�******)
�"` 9-08.8(1) Coating Systems Specification
A. High Solids Urethane
�„ Coating System: C1
Coating Material: High Solids Urethane
Surfaces: Concrete
Surface In accordance with SSPC
'� Preparation: SP-7 (Sweep or brush off
blast)
Application: Shop/Field:The drying
time between coats shall
� not exceed 24 hours in
any case
System Thickness: 6.0 mils dry film
;�„ Coatings: Primer: One coat of
Wasser MC-Aroshield
high solids urethane(2.0
DFT) Finish:Two or more
'�" coats of Wasser MC-
Aroshield (min. 4.0 DFT)
Color: White
"�" 9-14 EROSION CONTROL AND ROADSIDE PLANTING
9-14.1(1) Topsoil Type A
ri�„ Section 9-14.1(1) is supplemented with the following:
�******�
Planting soil / topsoil shall consist of loose, moderately well-drained, friable soil of sandy loam
texture, free of ice, snow and rubbish with no admixture of refuse or material toxic to plant growth.
� Soil shall be reasonably free of stones, lumps, roots, and weeds or similar objects. Topsoil should be
fertile and free-flowing(pulverized). Topsoil shall be Mycorrhizae inoculated.
+�w
Topsoil shall meet the following parameters:
Parameter Ran�e
PH 6.7-7.5
;,�„ Moisture Content 25%-55%
Soluble Salts 2.5 mmhos/(dS)
Coarse Sand 50%max (by weight)
Clay 25%max(by weight)
� Silt 15%max (by weight)
Organic matter 10%max(by weight)
�
159
�rr
09/OS/2017 �
�
9-14.6(8) Sod
Section 9-14.6(8) is supplemented with the following:
�******�
Sod shall be nursery-grown (farm-grown) under climatic conditions similar to or hardier than those �
at the site. Sod shall have normal habit of growth and be healthy, vigorous and free of disease,
insects, insect eggs and larvae. Sod material shall meet or exceed the specification of Federal, State
and local laws requiring inspection for plant disease and insect control. �
Sod: Non-net "Premium Shadow Master" Sod Mixture from Emerald Turfgrass Farms, Inc., Sumner,
WA, Ph: 253 838 9911 or 425 641 0608, or approved equal. Approved equal must be from a local
grower and be established in growing sod in sandy loam soils. Sod grown in heavy clay soils is not �
acceptable. All required certifications apply for "approved equal". Sod shall contain 65% perennial
turf-type ryegrass by weight and 35% hard fescue by weight.
9-23 CONCRETE CURING MATERIALS AND ADMIXTURES '�
9-23.9 Fly Ash (RC)
Section 9-23.9 is revised as follows: �
�******�
Fly ash shall not be used around water lines.
9-30 WATER DISTRIBUTION MATERIALS �r
9-30.1 Pipe
Section 9-30.1 is supplemented and revised as follows: '
�******� r�t
All materials for water distribution and transmission shall be new and undamaged. Prior to ordering
any pipe and fittings to be used in a potable water supply, the Contractor shall submit the material
source as required by Section 1-06.1 of the Standard Specifications. All direct and indirect drinking �
water system components which come in contact with potable water shall have National Sanitation
Foundation (NSF) certification. All pipe and fittings shall be clearly marked with the manufacturer's
name,type, class, and thickness as applicable and shall be marked on the component at the place of
manufacture. Marking shall be legible and permanent under normal conditions of handling and ,�
storage.
9-30.1(1) Ductile Iron Pipe
Section 9-30.1(1) is revised to read as follows: "�'�
�******�
1. Ductile iron pipe shall be centrifugally cast in 18 or 20 foot nominal lengths and meet the
requirements of AWWA C151. Ductile iron pipe shall have a double thick cement mortar �
lining and a 1-mil thick seal coat meeting the requirements of AWWA C104. Ductile iron
pipe shall be minimum Standard Thickness Class 52 or the thickness class as shown in the
Plans. Flanged ductile iron pipe shall be Class 53 per AWWA C115.
rr�
2. Non-restrained joint shall be rubber gasket, push-on type joint (Tyton) or mechanical joint
(M.J.) conforming to AWWA C111, unless otherwise specified.
3. Restrained joints shall be as specified in Section 9-30.2(6). �
4. Flanged joints shall conform to ANSI B16.1, class 125 drilling pattern, rated for 250 psi
working pressure. Flanged ductile iron pipe shall be Class 53 per AWWA C 115. Thicker �
Classes are acceptable.
The Contractor shall furnish certification from the manufacturer of the pipe and gasket being
supplied that the inspection and all of the specified tests have been made and the results thereof ,�r
comply with the requirements of the above referenced standards.
�
160
�
� 09/08/2017
+rr 9-30.1(2) Polyethylene Encasement
Section 9-30.1(2) is supplemented and revised as follows:
�******�
Polyethylene encasement (plastic film wrap)shall be eight mil polyethylene,tube type conforming to
'� AWWA C105. All ductile iron pipes and fittings shall be installed with a polyethylene encasement,
tube-type and in black color.
,� 9-30.2 Fittings
9-30.2(1) Ductile Iron Pipe
Section 9-30.2(1) is supplemented and revised as follows:
,� (******�
Fittings for ductile iron pipe shall be ductile iron conforming to AWWA C110, and AWWA C111 or
AWWA C153 and shall be cement-lined conforming to AWWA C104. All water main fittings shall be
ductile iron, short body, cement lined and for pressure rating of 350 psi for mechanical joint fittings
�'�" and 250 psi for flange joint fittings, unless otherwise specified. Metal thickness and manufacturing
process shall conform to applicable portions of ANSI/AWWA C110/A21.10. Mechanical joint, ductile
iron, compact fittings 24 inches and less shall conform to ANSI A21.53 (AWWA C153). Flanged
„� fittings, cast or ductile iron,shall conform to ANSI 616.1, class 125 drilling pattern.
Ductile iron fittings include: tees, crosses, wyes, bends, adapters, sleeves, plugs, caps, offsets,
reducers, and ells.
�
Rubber gaskets for push-on joints (Tyton) or mechanical joint (M.J.) shall conform to ANSI A21.11 /
AWWA C111. Gasket materials for flange joints shall be neoprene, Buna N, chlorinated butyl, or
cloth-inserted rubber suitable for pressurized water service purposes. Type of connections shall be
�"' specified as push-on joint (Tyton), mechanical joint (M.1.), plain end (P.E.), flanged (FL), restrained
joint(RJ) and threaded.
;�, Sleeves less than 12 inches in diameter shall be 12 inches minimum length and shall be mechanical
joint. Sleeves greater than 12 inches in diameter shall be of the long body type and shall be 15
inches minimum length and shall be mechanical joint.
�rw Where ductile iron pipe is to be joined to existing cast iron pipe of the same nominal size and the
outside diameter of the existing cast iron pipe is 0.05 inches or less from the outside diameter of the
ductile iron pipe being joined,the pipe shall be joined with a mechanical joint sleeve.
"" Where ductile iron pipe is to be joined to existing cast iron pipe of the same nominal size and the
outside diameter of the existing cast iron pipe conforms to AWWA 1908 classifications A, B, C, D, or
F, the pipe shall be joined with a transition mechanical joint sleeve having a single-piece casting.
� Threaded pipe and flanges combinations shall not be used.
Bolts in piping and fittings shall be malleable iron, Cor-ten or stainless steel. Bolts and nuts for
flanged pipe and fittings shall conform in size and length with AN51/AWWA C111/A21.11. Stainless
�rr steel bolts shall meet the requirements of ASTM A-307, Grade A. Shackle rods shall be Cor-ten or
stainless steel all thread 316S5. Stainless steel nuts and bolts shall be type 316SS.
Contractor shall provide Manufacturer's Certificate of Compliance in accordance with Section 1-06.3
'�" Manufacturer's Certificate of Compliance of the Standards Specifications for all fittings and bolts to
be used.
„� 9-30.2(2) Galvanized Iron Pipe
Section 9-30.2(2) is a new section and shall read as follows:
�******�
Where galvanized iron pipe is specified, the pipe shall be standard weight, Schedule 40, steel pipe
�rr per Standard Specifications for black and hot-dipped, zinc coated (galvanized) welded and seamless
steel pipe for ordinary uses (ASTM A-120). Fittings shall be screwed malleable iron galvanized per
ANSI 616.3.
�w
161
�rr
o9iosi2o��
�
�
9-30.2(3) Steel Casing Pipe
Section 9-30.2(3) is a new section and shall read as follows:
�******�
Steel casing shall be black steel pipe conforming to ASTM A 53. Before installation, coat casing +�
exterior with shop-applied anticorrosive coating conforming to AWWA C210. Minimum coating
thickness shall be 16 mils dry film thickness (DFT); however, thickness shall not exceed
manufacturer's recommended thickness. Coating type shall be a polyamide epoxy-coal tar equal to �
Tnemec Hi-Build Theme-Tar, Series 46H-413.
Casing wall thickness shall be 0.250 inch for casings 24 inches or less in diameter and 0.375 inch for
casings over 24 inches in diameter. +�
Carrier pipe for water main shall be Restrained Joint Ductile Iron, Class 52.
9-30.2(4) Steel Pipe �
Section 9-30.2(4) including title is revised as follows:
(******�
9-30.2(4) Spacers and Seals for Steel Casing Pipe �
Casing spacers shall be "centered positioning" type bands at least 12 inch in width, and shall be
either stainless steel or heavy duty fusion bonded epoxy coated steel. Runners shall be 2-inch wide
glass reinforced plastic securely bonded to the spacer, and shall be aligned on the spacer along the
axis of insertion of the water main into the casing pipe. Runner length shall approximate the width �r�i►
of the spacer. Securing the spacer to the water main shall be in accordance with the manufacturer's
instruction.The height of the risers and runners combined shall be sufficient to keep the carrier pipe
bell, couplings or fittings at least 0.75 inch from the casing pipe wall at all times and provide at least
1-inch clearance between the runners and the top of the casing wall, to prevent jamming during "�'
installation.
Acceptable spacers and end seals manufacturers are Pipeline Seal and Insulator model S12G-2 for �
stainless steel and model C12G-2, C8G-2 for fusion-bonded and coated steel, Cascade Waterworks
Mfg. Co.,Advance Products &Systems, Inc. or approved equaL ,
9-30.2(6) Restrained Joint �`
Section 9-30.2(6) including title is revised as follows:
�******�
9-30.2(6) Restrained Joint Pipe and Fittings �;
Restrained joints (RJ) ductile iron pipe and fittings, where required on the plans, shall be flexible
after assembly and be able to be disassembled. Restrained joints shall meet the following criteria:
1. The restrained joint shall have a positive metal to metal contact locking system without the
use of gripping teeth. Gaskets for push-on joint pipe with integrally molded steel or metal ,i,�
teeth or locking segments shall not be allowed as substitutes for restrained-joint pipes.
2. The joint restraint system for the pipe shall be the same as the joint restraint system for the
pipe fittings, except as provided in item 4 below.
3. The joint restraint system for the pipe shall be boltless. "'�'
4. Where restrained joint fittings required on the plans cannot be furnished or where
restrained jointed fittings are required in areas that are known to be subject to location
adjustments, the Contractor may submit a lay plan showing mechanically jointed fittings
with wedge restraint glands for approval. Mechanically jointed pipe with wedge restraint '�
glands shall not be substituted for restrained joint pipe.
Wedge Restraint Glands �
Wedge restraint glands shall conform to AWWA C111,ASTM A 536-80 Grade 65-42-12. All bolts and
wedges shall be ductile iron. Wedge shall be heat-treated to a minimum 370 BHN. Wedge restraint
glands shall be rated for 350 psi for pipe 12 inch in diameter and smaller. '�
�
162
�
+� o9iosi2o��
�
9-30.2(7) Bolted,Sleeve-Type Couplings for Plain End Pipe
Section 9-30.2(7) is revised as follows:
(******)
""' Transition couplings, reducing couplings, transition reducing couplings, sleeves, flexible couplings for
water main shall be compression type by pipe manufacturer: Romac or Ford or approved equal.
Bolts and nuts shall be high strength, low alloy steel, corrosion resistant per AWWA C111. Stainless
�, steel bolts require anti-seize compound. Heavy hex nuts shall be used.
The long body pattern with a minimum center ring or center sleeve length of 12-inches for pipe less
than 12 inches in diameter and equal to or greater than the pipe diameter for pipe greater than 12
r�r inches in diameter. Solid sleeves (greater than 12 inch diameter) shall be a 15 inch minimum length.
9-30.3 Valves
Section 9-30.3 is supplemented and revised as follows:
+�r �******�
The valves shall be a standard pattern of a manufacturer whose products are approved by the
Engineer and shall have the name or mark of the manufacturer, year valve casting was made, size
�„ and working pressure plainly cast in raided and legible letters on the valve body. All valves shall be
NSF approved and valve bodies shall be ductile iron. All valves shall be stamped with "NSF
APPROVED" and "DI".
� Where a valve is required to operate in a higher pressure environment than the Class of valve
specified in Section 9-30.3,the class of valve shall be as specified in the Contract.
� 9-30.3(1) Gate Valves(3 inches to 16 inches)
Section 9-30.3(1) is supplemented and revised as follows:
�******�
All valve material shall be new and undamaged. Unless otherwise approved by the Engineer, the
,,,�, same manufacturer of each item shall be used throughout the work.
All gate valves shall be ductile iron body, bronze mounted, resilient seat, non-rising stem and shall be
equipped with a standard two (2) inch square operating nut and 0-ring stem seals. Valves shall open
� counterclockwise when viewed from above. Valves shall be designed for a minimum water operating
pressure of 200 PSI.
Resilient seated gate valves shall be manufactured to meet or exceed the requirements of AWWA
� Standard C-509 and C-515 latest revisions.
Valve ends shall be mechanical joints, flanged joints or mechanical by flanged joints as shown on the
„�, project plans. Where restrained joints are called out, valve ends shall be flanged with appropriate
flange by restrained joint adapters.
All gate valves shall include an 8" x 24" cast iron gate valve box and extensions, as required. A valve
+� stem extension is required where the valve operating nut is more than 3 feet below finished grade.
Valve stem extensions are to be a minimum of 1 foot with only one extension per valve in shall be
installed in accordance to the City of Renton standard plans.
� Acceptable gate valves are Clow, M & H/Kennedy,American Flow Control (ACIPCo), Pratt/Mueller, US
Metroseal or approved equal in sizes 16 inches and less.
�,r, Approval of valves other than models specified shall be obtained prior to bid opening.
9-30.3(3) Butterfly Valves
Section 9-30.3(3) is supplemented and revised as follows:
�r �******�
In addition to the requirements of section 9-30.3, water main butterfly valves shall conform to
AWWA C504 and shall be Class 1506. The valve shall be short-body type and shall have flanged
�
163
�
�
09/08/2017
ends. Flanged ends shall be sized and drilled in conformance with ANSI B16.1 Class 125. Valve shall �
be suitable for direct bury and shall have a stem extension with AWWA 2-inch square operating nut
and suitable valve box. All butterfly valves bodies and discs shall be ductile iron.
The butterfly valves shall be manufactured by Henry Pratt Company, Mueller, DeZurick, Mosser Valve �
Division of Olsen Technologies, Dresser 450, Pratt Groundhog or approved equal.
9-30.3(4) Valve Boxes rw
Section 9-30.3(4) is supplemented and revised as follows:
�******�
Valve boxes shall be installed on all buried valves. The box and lid shall be cast iron, 2-piece slip type
with cast iron extension as necessary, conforming to the City of Renton latest standard plans. The rr�►►
cover shall have the word "WATER" cast in it and shall have cast-iron "ears" installed in the direction
of the main. Valve box extension pieces shall be provided for valves with groundcover in excess of
the depth of the standard valve box. �
Acceptable manufacturers of valves boxes and covers are Olympic Foundry, Inc., EJCO, Rich (Varnish
Casting Corp.)
�
9-30.3(5) Valve Marker Posts
Section 9-30.3(5) is supplemented and revised as follows:
�******�
Valve markers shall be Carsonite composite utility marker .375"x 6'-0" or approved equal with blue �
label "water". The valve markers shall be installed in conformance with the City of Renton Standard
Plans.
�
9-30.3(6) Valve Stem Extensions
Section 9-30.3(6) is supplemented and revised as follows:
�******) ,
Valve stem extensions shall have a 2-inch square operating nut and self-centering rockplate. A valve �
stem extension is required where the valve operating nut is more than 3 feet below finished grade.
Valve stem extensions are to be a minimum of 1 foot with only one extension per valve in shall be
installed in accordance to the City of Renton standard plans. �
9-30.3(7) Combination Air Release/Air Vacuum Valves
Section 9-30.3(7) is supplemented and revised as follows
�******) �
Combination air release/air vacuum valves shall comply with the requirements of ANSI/AWWA C512.
Air and vacuum release valves shall be APCO No. 143C- Valve and Primer Corp, "Heavy-Duty,"
combination air release valve,Val-Matic No. 201C, Crispin UL10 or approved equal. Installation shall >
be per the City of Renton Standard Details, latest revision. Piping and fitting shall be copper or brass. �
Location of the air release valve as show on the plans is approximate. The installation shall be set at
the actual high point of the line.
r
9-30.3(8) Tapping Sleeve and Valve Assembly
Section 9-30.3(8) is supplemented and revised as follows:
�******� ;
Tapping sleeves shall be cast iron, ductile iron, or epoxy coated steel. Bolt and nuts shall be Cor-Ten �rr
or stainless steel.
9-30.3(9) Blow-Off Assembly ,�
Section 9-30.3(9) is a new section:
�******�
Installation of blow-off assembly shall be per City of Renton Standard Details, latest revision. Pipe
and fittings shall be galvanized. Blow-off assembly shall be installed at location(s) shown on the �
plans. Temporary blow-off assembly on new dead-end water main shall be installed at location
shown on the plans. Temporary blow-off assemblies for testing and flushing of the new water mains
■r
164
�
� o9ioai2o��
�,r, will not be included under this item and shall be considered incidental to the contract and no
additional payment shall be made.
9-30.5 Hydrants
"'r"' Section 9-30.5 is supplemented and revised as follows:
�******�
Fire hydrants shall conform to AWWA C502 and shall be of standard manufacture and of a pattern
;,�;,�, approved by the City of Renton. The name or mark of the manufacturer, size of the valve opening
and year made shall be plainly cast in raised letters on the hydrant barrel to be visible after the
hydrant is installed.
Hydrants of the following manufacture and pattern have been approved by the City of Renton.
+rr Clow Medallion, M&H 929, Mueller Centurion Model A-423, Waterous Pacer, American Darling
Model B-626, Kennedy K81D Guardian, East Jordan WaterMaster 5CD250.
� 9-30.5(1) End Connections
Section 9-30.5(1) is revised as follows:
�******�
Hydrant end connections shall be mechanical joint connection unless otherwise specified in the
,,,,, description of the bid of proposal.
9-30.5(2) Hydrant Dimensions
Section 9-30.5(2) is replaced with the following:
+r� �******�
Fire hydrants shall have a valve opening with minimum diameter of 5-1/4 inches, "0" ring stem seal,
two 2-1/2 inches National Standard Thread (N.S.T.) hose nozzle connections, one 4-inches pumper
�, port connection with City of Seattle standard threats and with a 4.875" Seattle thread x 5" Storz
adapter attached with a 1/8" stainless steel cable. The shoe connection and hydrant connection
inside pipe size and auxiliary gate valve shall be 6 inches, mechanical joint with lugs. The operating
nut and port cap nuts are 1-1/4-inch pentagonal.
�r
Hydrant restraint system shall be two 3/4-inch diameter Cor-Ten steel shackle rods with a poured in
place concrete thrust block behind the hydrant shoe. If a wedge restraint system is used in lieu of
shackle rods, mechanical joint pipe shall be used. Hydrants shall be provided with a breakaway
i1r" flange assembly and be equipped with breaking devices at the sidewalk.
The hydrant curb stand section of the hydrant that is above ground including all exposed surfaces of
� the breakaway flange shall be painted with 2 field coats of paint Kelly-Moore Luxlite or approved
equal in Safety Yellow color.
Fire hydrants shall be installed per City of Renton Standard Details for fire hydrants, latest revisions.
�rr
9-30.6 Water Service Connections(2 Inches and Smaller)
+rr 9-30.6(3)Service Pipes
9-30.6(3)B Polyethylene Pipe
,� Section 9-30.6(3)B is revised to read as follows:
�******�
Polyethylene pipe shall not be used.
'�" 9-30.6(4) Service Fittings
Section 9-30.6(4) has been revised as follows:
�******�
;�,,, Fittings used for copper tubing shall be compression type with gripper ring.
9-30.6(5) Meter Setters
�
165
�
09/08/2017
�
Section 9-30.6(5) has been supplemented as follows: �f
�******�
Meter setters shall be installed per the City of Renton Standard Details for water meters, latest
revision.
�
9-30.6(7) Meter Boxes
Section 9-30.6(7) has been supplemented as follows:
�******� �r
Meter boxes shall be installed per the City of Renton Standard Details for water meters, latest
revision.
�
SECTION 10
�
10-01 MARKING PAINT REMOVAL
The permittee will be required to remove utility locate marks on sidewalks only within the `
Downtown Core Area. The permittee shall remove the utility locate marks within 14 days of job '�
completion.
�
�
�
�
�
�
�
�
�
�
�
166
w�
�
r.
r
r
•
�
�
�
�
STANDARD PLANS
�
r
_
_
�
_
_
_
�.
_
�rr
Standard Plans list
�
wr Traffic Control Plan
City of Renton Traffic Control Plan form
wrr (http:l/rentonwa.�ov/uplaadedFilesJLivin�/PBPW/TRANSP�R/FinaITCP(1} �df)
Roadwav Standard Plans
�
101.1 Cement Concrete Curb Installation at Catch Basins
104.3 Cement Concrete Driveway Entrance—Type R1B
,r,�„ 106 Typical Utility Cover Adjustment for Pavement or Overlay
� Storm Water Standard Plans
200.00 Catch Basin Type 1
�
200.10 Catch Basin Type 1L
200.30 Concrete Inlet
201.00 Catch Basin Type 2
�
204.20 Rectangular Vaned Grate
204.50 Storm Round Frame and Cover
221.30 Strap Pipe Anchor Detail
�
Water Standard Plans
""r"' 300.6 Poly Pig Station for Cleaning of Water Mains
310.1 Fire Hydrant Assembly
310.3 Hydrant Marker Layout
"�" 320.1 1"Water Service
320.2 1 %2" and 2"Water Service Located in Planting Strip
330.1 Valve Box, Marker&Operating Nut Extension
""'' 330.2 Concrete Blocking for Horizontal and Downward Vertical Bends
330.5 Shackle Rods and Tie Bolts
340.2 2" Blow-Off Temporary Assembly
"�" 340.3 1"Air&Vacuum Release Assembly
'�" Sanitarv Sewer Standard Plans
400.1 Standard Sanitary Manhole
+�►► 400.2 Sanitary Manhole Shallow
400.3 Sanitary Manhole Extra Shallow
401 Manhole Frame and Cover
� 403.1 8" of 6" Cleanout for Sanitary Sewer Main
405 Pipe Bedding for Sanitary Sewers
406.1 Standard Side Sewer Installation (Sewer Main to Property Line)
�rr
rrr
�
Prtnt Form Reset Form�
W�,�� --�...�
� CITY OF RENTON D Q�,,,•� ,�`�
TRAFFlC CONTROL PLAN C����O,�� �'�;�
rr
PROJECT NAME: PERMIT#
� CONSTRUCTION COMPANY: PHONE#:
CONTACT NAME: PHONE#:
� ADDRESS: CELL#:
E-MAIL ADDRE55: FAX#:
�rr
PROJECT LOCATION: N/E/S/W OF:
WORK TIME: APPROVED BY:
+iww
WORK DATE: APPROVAL DATE:
�
Permit Holder agrees to all the following:
� • Comply with all traffic regulations of the City of Renton and the State of Washington.
• Prepare a traffic control plan and abtain City approval of that plan. That plan shall be implemented for
�.
all street and lane closures, and the plan shall be performed in compliance with the Manual on
Uniform Traffic Control Devices.
• Notify emergency services{253-852-2121}twenty-four(24)hours before any street or lane closures.
""' • Any lane or street closures not in conformance with the approved traffic cantrol plan and/or without
na#ification of emergency services may result in receiving a citation for violation of R.C.W. 47.36.20Q
� through 47.36.220,9A.36.Q50 Reckless Endangerment, and other applicable State and City codes.
• Indemnify and hold harmless the City of Rentan from any and all claims,actions, and judgments,
including all costs of defense and attorney's fees incurred in defending against same, arising from and
"""` related ta implementation of the approved traffic contro!plans including claims arising from towing of
private vehicles and the acts of the Permit Nolder's agents and employees.
„�, • The City of Renton shall be entitled, in its reasonable discretion,to settle claims prior to suit or
jud�ment,and in such event shall indemnify and hold harmless the City for any such claims paid,
including the City's reasonabfe attarney's fees and litigation costs incurred resulting from such claim.
�` • In the event any claim or suit is brought against City within the scope of this Agreement,Permit Holder
will pay for legal counsel chosen by the City to defend against same.
.� • Flagger and sign placement are subject to revision by the City Inspecto�on site, if needed to address
traffic or pedestrian safety or travel.
* By my signature herein, I acknowledge all the above requirements.
�
PRINT NAME: DATE: OFFICECOPY r- "'
� WNTRACiOR
DEV.SERVICE,INSPECflON P.MILLER
SIGNATURE: DEV.SERVICE,PLANREVIEW 8.8ANNWARTH
PflUtE CHARLES KARLEWtCZ
fIRE FIRE MARSHALL FS N13
wr
w
�,,, NOTES:
• Work Zane Traffic Contral shall be in accordance with the Manua)on Uniform 7raffic Control Devices (MUTCD)
and shown by sketch or reference to WSDOT.
'""' • The plan must be submitted to the City's PW/Transportation Division for review andJor approvai at ieast three
working days prior to work.
�
- Appraved Temporary T�affic Control PEan must be at the work site during work hours.
• Contractor or entity must call Rentan School District(425-204-4455)or any public/private agency to be affected
by a temporary lane or road closure.
,�r • Complete assistance and accommodatian shall be provided ta all kinds of pedestrian traffic when sidewalk or
walkway is impeded.
• Total road clasure lasting more than 24 hours is subject to the approval by the City Council.
d11" • Any vehicle,equipment,barricade,ar portable tow-away sign used within the work area must display a
campany laga or any legally acceptable sign showing the company name,address, and telephone number at a
wr
conspicuous place on the vehicle ar equipment.
In the case of Temporary No Parking 2ones,all the following app[y in addition ta previous:
• Contractor must complete form to shaw limits of Temporary No Parking Zone identitying barricade locatians for
,,,, vacate parking or curb lane usage.
• Contractor must post notice of dates and time af Temporary No Parking Zone with at least two signs per block
72 hours in advance of effective date and fiime.
�"` • The cover sheet of this Traffic Control Plan farm must be attached to each Temporary No Parking Sign on the
project site.
�
- Temporary traffic contral devices must be removed immediately when wo�k is done or no construction activities
are going on. If deemed abandoned, City crews will remove and store them at the City's maintenance shop
(3555 NE 2"d Street).
r�
SKETCH
�
I
-- NORTH--
I
a�
�
�
+Mr
�w
�r
�r
�r
8EENffIE2 /S'R X 5/B"D QUMMY JOINT + BEENOTE4
Mk Z� - �� Z' - 0' 6
�
� ' ' �
* � .
� — —
" � � �
""` 1 I
3/8' PREh1ULQED JOtNT FIILER {TYP) � +
,� � L _�_ J a��oou��xi
5' � 5'
1�1�
��r
,�rr
PLAfV ViEW
FA�;EOF ��C�R111E
�CURB
ti�l�
6 1 2" 73'
5 7 z• �• (1:OB'j
,,� i/2� R' 1' R' Rd1DWAY �N���D OU1TEft�ITE7U 0�
BLOPE
� p J •a TOP OF
�•! � 1" R. � �� ROItD1NAY
1MY i� '"o �.� _ ,._...., ., . , �
4• '
. ��' • �
►' '�' 9 . . �'..r
� " 0
.. . ' p ' ,'p;
`�� D•�•� ' 9.�•• • AQIUBTMENT$ELTfON-{�Q�lNCLUOm
:►' :>' MICURBANDQUTSH281D�IEIH
'°, : ►
�• ' G47CK 8I181N�I�T WCLlJOED
o. � IN CUA9 ANO GllRQi BID 11EM
� •° •a
• °, _4 � -
:.��%+�..�.
. � �:
�II�I► .�^�,/ f
S�C.��N O .fii-' /, T w*'�r.
.r ��
%` _
,l. , '
G�NERAL NOTES: ';'',�� .
�'► .:="�i , ..
1. The intent of this�estgn is t�o tadlitets tha removsl' -•-:j! . ...
of a cabch basin with rntnimsf�sturbanoe 4 ,: '
of the ant�. � ,
� 2. 'fhe analon � '��� `/�i. ' � _.�
exP jo1r�oi the ' . � -�i,..�" .� ,:,-
adJac�erit s�dewalk sha�ll ,; ,;1���,�, �i ;�' '
be-adJus�ed to be In ;If . 'T __-I -
... tine wlth these curb �f j,!' `�. '
expansbn Jaints. ..�,,, _ � f� �
,. i��, {; ,'� 1
„� -. - � ,: :l�}� "+ � J
f , � � �so��ic v�Ew
,' � \�J
{'.":'- _
�
CEMENT CONCRB'1'E CURB �• � — 101.1
� + PUBLIC �YORKS �NgTALLATION AT PRO D:
� DEPARTMENT CATCN BASIN$
� DA
�
�
N."J x'r;?d��tQ"�.Ur".af.S5d1lYdA.KRafA?$��.
. .. ..... .._..r .,,- . ... ..... .......
� 6�;. - ..... ....:�tx��3E.�aa44E Y ..... �r.9a�,, �
_ _. _ _ ..,, .... ... .. . .... . ___. . .,.
4�£�#'1�TE C4- i �£#tasl'tE k- '�.
7�;.F nf%"A�€p �� �� }""� '�.
Q
A�E�Y AECY>F�F`.II .....^'^�.____�_.._„____4,.-,.,............ ...�_�.,.��..,.e...�
t
� t
��Y�dF#.,�+�"i a^,�1T&'f'f3'i ��` ` �
g�$E S7a9 I�il�fE 4Y.2;�j't W�"� � �Ci.�EMtI
f�E j���E1�
� 'S � S�w��,�t
/ }
: �
,
� ��
E
.._..v.a. ..._..-.... —........�,..._ ..._--�
� ��� �� °
;F
,� �jj� �' �>j
�� ��$ '��:EP�n.f3 A,.�,_- 1
� � ��� 1�
�," ;
1I1�1� �' 3 ��� �
���n�.. � ... -,�3`\ ...-,.�
d� �� ' t;.i� ,.,�,
� � � � ,
�
�rr �.-.�..-.<:,...� __,�___ , ��
�� _..�. �._._ � �.._ �_.�..
_� �.. �._ — ______.
�.��..�. u.�.. �.. .._.�.____ __ �
r����M������ ' �
p � � s�e rr�r¢-, Me+�zrs�ratz�:c
�:.>�a�rss�,�ur , � � ���n a�urr€R �,d
$4.fAPE I7'YT`9`� { SCE R�tTf 7$
d
�ti! �a��e�'.z�s��Y€,�t�a�a»�3�r-' P�,&htvi�t^2
v*Sie�5
� f�s���8C5'�#-:: ..,,.,_ fkS`�.i.tA:R wEEk.'aTe;d§T$"�;:
'� J'
��� -�#^:-^,.-.-,..,._-«���.mm��.-�__ � :�--�,.�'.,�`l--a�
�,� •��>��-W= ,f�`� � L G�,
w E.g-�4 t
c�r„�e ����r¢ r,����rr aa�s��,:r-=�
s_ 5"',s�Way°.it �'''�q S�`�%.SsAf..'+lOt1 JSY�E9T dTl'���. �ek=_sa�3
�iE�,�Ti7t3 t t� i �E,�:$Tp P`,.�hP 1�Y:�
}""� t�k��'st�. 51?Yah%a8,'8*.
$""�.;�tE1�%���A S{;...'fGE A.SAd - -
RbF�t��trhYW Y1s&�71bESlt.YPEl�-���>�'��aa�,R�:i€�aA1"fC#; t�
'� ++�� .... S g.... ' �� `�'-�+^
} � �� ':. .5�. _'" " s' t� -.wy. .�...�,�.e. ...,...-,.9.�*,
.w.. .'�, .y.p, ._._....... L3�ffil+£Y3,lY- �� 4�#. �q�e �
'm E x � .. '{•.
�sretew�,r+n<a�u�r� � �."' � ,;.. � c, . ,SEL"CiL?�I 4:,1
li�C✓�it+PE9d;4N�f�ti'�F. - . . .,. .'__......_... . . .
SNt7Ye7i��ERAX7Fp�. � :_ . ...
�
�
...... .. - . ,�+
� � �
+,.4 .~f�EMEN?��,"REFE
�� ,r^'` ,s''`��°w �t�i S�.dY'�Efi
��.�� g,,,,..,,,:� £°.,��tt6�zE 3}
�� � �
�,.,s. ��� ��:
GE#�.�i€ �U �r,..;�5
� ^
�t ��+4)c �,S„'%f.. ._�•.:°� � tTtt�
a 'aTF�F€
�'"' � ' � a�. '.x•�;�BaEi 5�h'r fiid7�.:
� ���<..•�'�.
��
B�{ry('"�i[.�..g�6^'�Fg-���y 'y9{i1+:Yiy„�F��y��t3�[7'4e7!�.1.. V I��yYY
��C�ddYe...i V�Iri{..,TY t!�B R.aki���^4�
� P�Q�!`PV i��7�a V.�7.!'r����Y�!J•F.�
'� :..�. :.. �. �� -� �.Q�.a�
,�,� .. * PUBI.E� WpRK� CEMEMT CtlNCitET� ClR1YE'YVA"Y ��� lg�,1J::
T
�,.�,� I��:PA�"P�fEN7' E�TRANCE - T�"�E R1�t
wrr �r':�
(;f��g�arrrrr,�rman,Pv6t6c�Jc�r€���dministr�t�ar
�r►
wr
PATCHEC? AREA
� �
�+ r-
� j\,
/ / "`_
�
A � " \ A
� j �
� � °�. COVER�,' ,:: I
� �
�
'rr' i
� /
COVER PER 5TD PLAN 4Q1 �
� + /
iiK1 `g�
,� '�-,...�,___^_P.
� SEA�. WITN AR 4400 (3R. APPR4VE�—!!
EU!!AL AN� DRY SANq AFTER
PATCHtNG
P�Ar�
�• r�Ts
OUTSIpE DlAMETER Of
ADJUSTMEN7 RING AND
x BQTTOM QC CA5TiDFG FRkME x �Ef TN OE Hi�AA TC) £�£ 2.�
(5EE � ! BELOW THE Bf?TT4�.rt 0�
� IJOTE 6} TME llPPER ADJUSTMEN7
RlNG OR A MIMMUM QF
8" WWICHEVER IS GREATER.
�
�
1�11
MORTAR JOINT(S) (3J$" MIN.-1" MAY,.) ADJUS7MENT RING (2" tvilN.). 5EE
SEE f�OTE 3 AND SPECIAL PR�YISON NOT'E 4.
+wis 7—�5.3{t).
J��T�l1I�l !-1"""A
�
NUT�S
1. R£MQVE PAVEMENT AND BASE MATERIALS FQR A DISTANCE 4. At?JUSTMENT OF'FHE FRAME TO GRADE SHAIL BE
�► WNICH IS E4UAL TO l"HE DEAMETER OF TNE FRAME PLUS TWd ACCOMPLISHED WITH ADJUSTMENT RINGS AND MORTAR pNLY.
FEET. AOJUST CASTING FRAME TO PAVEMENT SURFACE THE USE OF SH1M515 PROHlBtTEO.
USING RISER R1NGS AN[7 MQRTAR_
5. ALL MOR7AFt JOINTS SHAi.L REMAIN 4/ISIBLE 11PON COMPLETIOtJ.
� 2. REPLACE EXCAVATED MATERIAL WITH A MfNIMUM QF$"OF
HMA CLASS�"PG 64-22{OR TO A DEP7H THAT IS 2"BELOW 6. X=1'-D'd�A IN. TO 2'-6"MAX.
THE BOTTOhA OF THE UPPER ADJUSTMENT RING WH�CHEVER
IS GREATER)OR AS APPROVEO BY THE ENGINEER.
+� 3. ALL JQINTS BETWEEN THE CONE,ADJUSTMENT RVNGS AND
FFtAME SHAl.L BE MORTARED.MORTAR SHALL BE ASTM C270
FOR NPE S.
Y++
STD. FLAN - 106
,�• PUBLIC WORKS TYP'�CAL UTlI.ITY COVER RQy� .
�f'C DEPARTMENT ADJUSTMENT FOR
++� PAVEMENT OR OVERLAY � � � �� �
ruti M i.e�sms�ar•wr DATE
�
�w
Y `�
� �/�/�"" �/
� � ��� ��
%/ i
Z ��\�~� �� i PIPE ALLOWANCES
� �!i '
�+ � ' E MAXIMUM
FRAME AND VANED GRATE I P�PE MATERIAL DIAMETER
__�— ..�.
REINFORCED OR 12,
PIAiN CONCRETE
�t .
� ��� ALL METAL PIPE 15"
\
'�j'�����v � �, ��'
� �� ��.�� �2�� � CPSSP* �.._ —_..
, �. � _--__ _ 12"
�/ , � ,� �� � jy > (STD.SPEC.9-0520)
�1�. � \ � \ ' � �
�
5 \ �/ x j �" SOLI�WALL PVC
������ (STD.SPEC.9-05.12(1)) ` 15�
; � � � %� �.
� ���� � PROFILE WALL PVC
\' � � 6"OR 12" (STD.SPEC.9-05.12(2))� 15�
� \� j \ �*CORRUGATED POLYETHYLENE
�� / � STORM SEWER PIPE
� � � j
•.I
'�._ ONE#3 BAR HOOP FOR 6"HEIGHT
TWO#3 BAR HOOPS FOR 12"HEIGHT
i�111
RECTANGULAR ADJUSTMENT SECTIDN
� 26 o,��el ,� �-<,�S,FFNo,
\
`gE��'� / ^�� �\�s� NOTES
�� �� �� ��
�Q.l��\u�j! �� �� . 1. As acceptabie aftematives to the re6ar shown in the PRECAST BASE
� ��•�% � �� ��� � SECTION,fibers(placed according to the Standard Specifications),or
A�� ��� /��'� "� wire mesh having a minimum area of 0.12 square inches per foot shall
�i'�f be used with the minimum required rebar shown in the ALTERNATIVE
�' J i� -. /. ;� \ > � PRECAST BASE SECTION. Wire mesh shall not be placed in the
/ I � � ' knockouts.
� #3 BAR EACH CORNER--�"�//�� � j �
;� j � �a: ; � 2. The knockout diameter shali not be greater than 20". Knockouts shali
l = \ I ° ( � � � �� have a wall thickness of 2" '
� �� j 't , / mirnmum to 2.5"maximum. Provide a 1.5"
i: N minimum gap between the knockout wail and the autside of the pipe.
�t G°,� / After the pipe is installed,fill the gap with joint mortar in accordance
�P t13 BAR EACH SIDE�� ; /� � r�' with Standard Spacification 9-04.3.
� .
�� � ` � 3. The maximum depth from the finished grade to the lowest pipe inve�t
�–'� r� ',. / sha0 be 5'.
'� 1t3 BAR EACH WAY --i�� � 4. The frame and grate must be installed with the flange down.
PRECAST BASE SECTION 5. The Precast Base Section may have a rounded floor,and the walls may
be sloped at a rate of 1:24 or steeper.
�' 6. The opening shall be measured at the top of the precast base section.
'/��j�\�� 7. All pickup holes shall be grouted fuii after the basin has been piaced.
� /j � \\��� 8. Ali grade rings and castings snall be set in rnortar in accordance with
�� �jj Standard Specification 9-04.3.
�
�ii
,(��,�� ,�j��,
#3 BAR EACH CORNER I° '
� 18"MIN.—'� I ��
/ � i
� [; �/
/ ����� ;i �
�` #3 BAR HfJOP � k',i I
�I,
i
,\ �.���,, ,�
�
SEE NOTE t
ALTERNATIVE PRECAST BASE SECTION
Y
"` �~�� PUBLIC' WORKS CATCN BASIN TYPE 1 �• P� - 200.00
� / BFPARTMENT
�'NT� �fARCH 2O08
�
rw
$ i PIPE AI.LOWANCES
'
N
� � /
MAXIMUM
� �� � /'// PIPE MATERIAL INSIDE
m �� y/ �j � DIAMETER
� \��/ REINFORCED OR �
� o � PLAIN CONCRETE 18�
FRAME AND VANED GRATE ALL METAL PIPE 21^
CPSSP* ��_ 18" YLL
� (STD.SPEC.9-05.20)
� � ���
�j� ,,>� � �^ SOLID WALL PVC 21«
/r .yA� \.�`��J�2p. \ (STD.SPEC.9-05.12(1)) ^
� /�
� �' � /� \\ �- �' PROFILEWALLPVC 21�
� �j�\� ��i \ � /� (STD.SPEC.9-05.12(2)I
' ��� �' �; �t CORRUGATED POLYETHYLENE
��\,�;% �-��j �� STORM SEWER PIPE
i`/ .
� E //�� \ B^oR 12° NOTES
��°� _ � �� 1. As acceptable alternatives to the rebar shown in the PRECAST BASE
\� SECTION,fibers(placed according to the Standard Specifications),or
ONE#3 BAR HOOP FOR 6"HEIGHT wire mesh having a minimum area of 0.12 square inches per foot shall
TWO#3 BAR HOOPS FOR 12"HEIGHT be used with the minimum required rebar shown in the ALTERNATIWE
Wit, PRECAST BASE SECTION. Wire mesh shall not be placed in the
RECTANGULAR ADJUSTMENT SECTIpN knockouts.
2. The knockout diameter shail not be greater than 26". Knockouts shall
� �` /4 have a wail thickness of 2"minimum to 2.5"maximum. Provide a 1.5"
�� / ��� 3 minimum gap between the knockout wall and the outside of the pipe.
j°- ry.�'� / / j�� ?o.:� After the pipe is instalied,fill the gap with joint mortar in accordance
� �� \ � with Standard Specification 9-04.3.
/ / i e+ `�-
� a�'��\j� i' ������ y 3. The maximum depth from the finished grade to the lowest pipe invert
.r � � r� /���/ � � shall be 5'.
�`� �� � �,\
\\\ � //��6 4. The frame and grate must be instailed with the flange down.
�� � � 5. The Precast Base Section ma have a rounded floor,and the walls ma
'rr \,J�'/'9`�`'<.��� be sioped at a rate of 1:24 or steeper. y
TWO#3 BAR ___�-i 6. The opening shall be measured at the top of the precast base section.
HOOPS
REDUCINCi SECTION 7. All pickup holes shall be grouted full after the basin has been placed.
�
8. All grade rings and castings shall be set in mortar in accordance with
�y�: Standard Specification 9-04.3.
F�`y. /
o�
� � it3 BAR EACH CORNER
b',�\\ /-4.�/SF 2B, #3 BAR HOOP --� 18"MIN.—��
�'t`��"/ \FiV \
F.,%� �\><� �p�,� ���� ��
�4- /��� \ � \6J ��� 1
/ � �
� '� j� � \� �j�/ \�� '�
, C i j � ;f/
`\�\� � NJ+I� / �/ ��\� �� {I�
� \ / �/ ��\•\ �� I'
�C � � \ �� � � � \ � 3 i
� � �i � 'i° ! '
.'t\�,�j � � . I� /
#3 BAR _ ,, ` j � � � - y �
EACHCORNER \ �j ��� / ':' � ,
�� i
� #3 BAR ��� � �� ' 3 �\ � /�
EACH SIDE ___s t ` €.. N � / i I,� �
i
'� �i �' � � >
\ � � .� / ��j/ I� \ � � /
\. �'•' j \. ..�% / \ •.,� \J.:J / .
W
� \ � �� �\. �.
#3 BAR �
EACH WAY
SEE NOTE 1
PRECAST BASE SECTION ALTERNATIYE PRECAST BASE SECTION
�r
"'�' �~��� PUBLIC; �NORKS CATCH BASIN TYPE 1 L �' P� ' 200.10
���,� DEPA�RTMEI�T
c�N O MAHCH 2O08
�
i�
�
3
�
Ya
2
�� �
m
� � �/
° � < 'i/�
�, �.�
�,�'/
rir _----..___—_._ —..__--.._�
FRAME AND VANED GRATE PIPE ALLOWANCES ;
F MAXIMUM
� �, PIPE MATERIAL INSIDE ;
'�' 3A % \� //'` 3�' DIAMETER;
/����/' 2�\ REINFORCEDOR �Z,
f/` / � \ PLAIN CONCRETE
�,� � �•
�\� � \\ ���� � ALl METAL PIPE � 15"
1�' � � �` �. � / �
� �.�� y� ' CPSSP*
� � (STD.SPEC.9-0520) 12�
-� 6"OR 12" - _......
� :•� � � SOLID WALL PVC 16" �
'� '>
' (STD.SPEC.9-05.12(1))
1� �, '
V �� � PROFILE WALL PVC �
�:`ONE#3 BAR HOOP FOR 6"HEIGHT (STD.SPEC.9-05.12(2))j 15�
TWO#3 BAR HOOPS FOR 12"HEIGHT ,t CORRUGATED POLYETHYLENE
STORM SEWER PIPE
�
RECTANGULAR ADJUSTMENT SECTION
� 260,��61�\ ^,�FF�?,
/ O
�5ti�/� /� � � �sJ
,�yP��. /// \�\�y
A�\�l/ ��� .�.
�rrr / .
rr
� f ��\ ' NOTES
f �
#3 BAR EACH CORNER—�� ��✓� �OI � �� N 1. As acceptable alternatives to the rebar shown in the PRECAST BASE
�<1,/ � � � 3ECT14N,fibers(placed according to the Standarcl Specifications),or
� #3 BAR EACH SIDE '\ .� j . ��i � �i wire mesh havin a minimum area of 0.12 s uare inches
TOP AND BOTTOM � 9 Q per foot shali
' � i � be used with the minimum required rebar shown in the ALTERNATIVE
�.�il�i ��� PRECAST BASE SECTION. Wire mesh shall not be placed in the
�� knockouts.
��_ ONE#3 BAR
ACROSS BOTfOM
� 2. The knockout diameter shall not be greater than 18". Knockouts shall
PRECAST BASE 3ECTION have a wall thickness of 2"minimum to 2.5"maximum. Provide a 1.5"
minimum gap between the knockout wall and the outside of the pipe.
After the pipe is instailed,fill the gap with joint mortar in accordance
with Standard Specification 9-04.3.
� 3. The maximum depth from the finished grade to the lowest pipe invert
shall be 5'.
�'� 4. The frame and grate may be instailed with the flange up or down. The
'\ frame may be cast into the adjustment section.
� j j ��\\
�� ��� 5. The Precast Base Section may have a rounded floor,and the walis may
\` % be sloped at a rate of 1:24 or steeper.
;� -�
j;,�� , 6. The opening shall be measured at the top of the precast base section.
9�r /Y r.
#3 BAR EACH CORNER I' �' � � ( 7. All pickup holes shall be grouted full after the inlet has been placed.
18"MIN. � \ � /
\� I '�
� ,. j;
�` �
�rr / %
#3 BAR HOOP --��
SEE NOTE 1
ALTERNATIVE PRECAST BASE SECTION
�iw
111Y
'sY
,r � '�.� STD. PLAN - 200.30
�� � PLEBLIC" ZNORKS CONCRETE INLET
�,�� DF�aRT����
FNTO ?v1ARCH 2O08
�
..
Z
�
� ��,,
rr � `��
a ' CATCH BASIN FRAME AN�VANED GRATE(DETAIL 204.00)
m ' \\
� ' �' \� HANDHOLD
0 1 -
� ' N � �� �—" RECTANGULAR ADJUSTMENT SECTION
� -- - OR CIRCULAR ADJUSTMENT SECTION
�, � � —GROUT,TYPICAL(SEE NOTE 5)
U: � �
¢� FLAT SLAB TOP
i� w:
'�� ��-_..� " ..
i-: _...
z
�
�: o
O
� 48',54',80',72•,84"�OR 96"
� ._._—..,..__.. _._�..m_.
� � e i-MORTAR(TYP.)
ol
�l f> ., .`; f'�I ., °-'-'�
� i� STiEAOSDER-` � `
� ��
_ I ol �
� � I�� � �_.�I �
I �-�� �-,-�,,--.-�
�1. � -"' Z�
��� �
�y MORTAR FILLET-� � g�� � ��REINFORCING STEEL(TYP.)
�� N � � GRAVELBACKFIILFOR
\��.• e'� 12� —PIPE ZONE BEDOING
L� D �
.� ��� �-�� .� '��
� SEPARATE BASE INTEGRALBASE
CAST-IN-PLACE PRECAST WITH RISER
"O"RING
12' p .�
� �' ��-. � �,- .
'`-'.����'��' GRAVEL BACKFILL FOR
s—� � PIPE ZONE BED�ING
�_.... .o� �cs�
SEPARATEBASE CATCN BASIN DIMENSIONS
_.._�.._._—__........ __._. — ... —__...._
PRECAST M-i-___... —.--.._.---.._—._...._.
� CATCH MAXIMUM : BASE REINFORCING STEEL
WALL BASE
BASIN KNOCKOUT DISTANCE �nz/ft.IN EACH DIRECTION
DIAMETER THICKNESS THICKNESS S�ZE BETWEEN t--___�._..�____-__.__
;KNOCKOUTS�SEPARATE BASE INTEGRAL BASE
_.__. _.._ _.�__. __._ _�_.__ —._......_ __---__�..._ �....__ _.
48" 4" 6" 36" 8' 023 0.15
� Sq" 4.5" 8" 42" 8" 0.19 0.19
60" 5" 8' 48" ( 8" 0.25 ' 0.25
_..__._ __.__ --- ----... _.._._—__G___-_..._. _._-__......___ ..__—._.__ —_.
72" s" ^ 8" 60" I 12" 0.35 024 �
--- ......_ -�_._.._ ---f----____ ._ —_...._._—
,� gq" 8" 12" 72" i 12" 0.39 0.29
gg^ 8" 12" 84" 12^ 0.39 0.29
_. -.._....._..._._---._�_.._.... __--._.�_.._.._---..__
r�e NOTES PIPE ALLOWANCE8
�. No steps are required when height is 4�Of 1255. CATCH P�PE MATERIAL WITH MAXIMUM INSIDE OIAMETER
_.....— .—__.�_.
BASIN pLL T SOLID :PROFILE
2. Tf1B DOtfOfTl Of th2 p�QCBSI C2tCh b8S1ti tT18Y bQ SIOpBCI t0 f8CIG18tQ CIBBflifig. DIAMETER CONCRETE METAL I CPSSP I WALL WALL
i, L,)i PVC 2�}� PVC'�3
'� s. The rectangular frame and grate must be installed with the flange down. as^ 2a^ 30^ za^ z�• ao^
The frame may be cast into the adjustment section. sa• so^ as^ so• 2�^ ss^
a. Knockouts shail have a wail thickness of 2"minimum to 2.5"maximum. Provide so° ss° a2° ss~ ss° a2^
__---...._----_.._.. —._..__
,,,� a 1.5"minimum gap between the knockout wall and the outside of the � e. After � � �
p P 72" 42' S4" 42" 36" I 4g"
the pipe is installed,fili the gap with joint mortar in accordance with Standard -- - -- __..__.—;_.._..__
Specification 9-Q4.3. e4" 54" so° sa- € ss� ae�
96" 60" 72" 60" 36" 48"
5 All grade rings,nsers,and castings shall be set in mortar in accardance with y y pe($td.Spec.9-0520
� �Corrugated Pol eth lene Storm Sewar Pi
Standard Specification 9-04.3. )
(��sca.spec.s-os.�2(���
�(Std.Spec.9-05.12{2)j
j"" �~��� PLfBLIC WORKs CATCH BASIN TYPE 2 �• P� ' �01.00
,�,���/,$ DEPARTME�vT
1v's ?vIARCH ?008
rrr
�
�
N ,Y ��
.........-__'_�.....-��_.....-.........�.....-..,...-_._...-........
� �MO� _.�. �..._.�
� � �
i
m ^��
,/.
I j 3.iI ��
3 '_��___�_
q� L�� �SLOT-SEE DETAIL 1 5.�
o � AND NOTE 1
� CC � -�--�- ,
,,'"j- I � I" -� 5�1 ���I
� l�
I �- `�
5" �
�t �.__-____
� � � 20 1 i
�f � l �j � 5.1
}� �_�___ �
� 5"'
Z` ---�-' ' a �-i-�:
O ii � j
�� �_�.__ � 5, fi __ -�-�,
� � 3. �
� C�,TFALI.. TC ".FRCAM DUMF NO PCLLUTANTS � ���'
. _..__.�,..._...._—..._.. i.
�� TOP SECTION s)
�.
�
2a^
� i 7_OR 8 EQUAL SPACES
� -. _
� _-_.__ —__-__ -__�_._________._. —._._- I
m l 1
�n i �IRECTION OF FLOW
'� ������--� . ��� � ��
� �
� f �
SECTION �)
�- ; \
, r � ,
�
I i j ,�2
I I 3/4'_� I
� 1 7/4"
�
i
� � `
/-� � �5/8" � '
� j !� � �.�
il�J� /� � �� �.
���� �. ��� � �A
/ � 3 �\\
�� �� ��.., ' v
���� � �< �� �� ��
�r` r i �.� .� ���''�-i �✓'
�� / ✓���✓�\ �`/� BOLT-DOWN SLOT DETAIL
/� y SEE NOTE t
\�.� ' `-��`����'/i' NOTES
�. �, �- �
���✓ �i' ' �� Provide two slots in the grate that are vertically aligned
\���.��� with the holes in the frame.Location of bolt-down siots
�Y� varies among different manufacturers.
+�r
ISOMETRIC 2. Refer to Standard Specification 9-05.15(2}for additional
requirements.
3� Unless othe►wise specified,vaned grates shall be used with standard frame
'� in the travel way,gutter or shoulder.vaned grates shail not be located
within crossroads.Use vaned grates along roiled curbs.
�Y ,
4 o STD. PLAN - 204.20
"'' ���� PUBLIC jNORKS RECTANGULAR
,�i � DFPARTMENT VANED GRATE
�'N�T� MARCH ?008
�rrr
�
�1/2"[i3mmj LETTERING
�il� / /
/ `� /
/ ��% BOLTNOLES•3 PLCS EQUALLY SPAGED 120°
�/ ��S kNT= _ �R�I^✓S J��\ � APART ON 23 1/16"(586mm)DIA B.C.
� � �`yO�> T x aiiya�ow
� �,, . .�� � tra�i�F.00
lV) � F, �,
�JJ > � �V
\1 r�'
� ` Y��
I RENT � m
ON y
� AHEAD OF THE CURVE ,��
iW1t ; 1� � �P
i
� � �
,\ I'��1 I'`,1 �,�
� \�� j�.``(1)1"(25mm)
��� � � DIA PICKHOLE COVER BOTTOM VIEW
�
��_Q �
"`1 1/4"[32mm]LETTERING
illll!
PLAN VIEW
� 25"DIA,
.___.._,,,,___ (3)BLT SOC.(ALLEN HEAD)
[635mm] ������— �^ � 5/8"-11 X 1.5 SS
(25mm] � RUBBER WASHER
3/4" '�
� [19mmJ �
,iY�l►
._„. _� ..,..\
� 83/4" �_ 2 1J2"
�, �222mm� [64mm]
TVP
COVER SECTION VIEW
�
EON BOLTING DETAIL
�W �_ 261/2"DIA
� [6�3mm�
i
� _._�_ 25 1!4"DIA
[64tmm] —.—.__._-►I
� 11H6"
�' � .....—1/4"(6mm)DIA � [27mm]
NEOPRENE GASKET
1 � 6� 1/4"
�' [t52mmj [6mmj""�� 1 1/16"
� [27mmJ
,I � � �_, f ,"
5�8� 23 3/8'DIA CL pPEN �
(t6mm] � I ` � [594mm] 3mmx�..j;�;, �
� j (
� I 1 /
� �_ 27 5/16"DIA
i �694mm] 7/8"
[R3mm] l
� � sa ve"DIA GASKET GROOVE DETAIL
[867mmj
NOTES
FRAME SECTION VIEW
ALL COVERS SHALI BE LOCKING LID PER EASUORDAN IRON WORKS INC.No.3717C1
y�, OR APPROVED EQUAL.
" ;~��Y � STD. PLAN - 204.50
/l��� PUBLIC WORKS � STORM ROUND FRAME AND COVER
,,�,�—R�,$ D�PARTMENT i
�'1VT� { MARCH 2O08
�
r
a
Y
�
N
Y
�
� �
Y
m
�
Q
K
O
�
=i�:�: . A�
���i
'i,,i,
i� = -
�s �mrq_ e
/ v v �
c
� v�
concrete Wock 6•
i
rV �0
I
=�'17f;i(E-��.�Zr'
�IV
4 -
eoncrete bbck anchor �'�'° p/
�.�d�
+�11r
3• �'`�� %
��h,
/ �pipebedding
e ���
� strapdooting anchor
1��� �Y�i� �-i��t:�.'T'r�—�_L�
`n=i.._
j� � �i�.
�17-
��µZ�irF- �tl�;�r� i_:
—r �6'min(typical)
1i � , a a -I�I_ E- - � 111,-'
�1 9. o nf:o� 'min WT _ H LF-i ���.
4`4ov 4��4� �a �
t �,���� ���� � H�
� ° �0 6"min -- ,= 1"min,diameter
� V°.o . } ,-steel rod(straP)
o� .,P� T�� : � T, ciamped securely
6"min T� to pipe.
co�cretefoo6ng -
keyed into 6"min � conaete footing
� undisturbed soil SECTION A-A r4ia ' -�i'" keyed into
as shown --NT$ — � m � x��°'. undisturbed soil
W .< pl_9 as shown
t.
i1111 �s---�-R���-�y.�
I
SECTIpN B-B
�..NTS_..._.
� Note:
For SWPE,pipe must be free to
slide inside a 4'long section of pipe
one size diameter larger.
�r
�
�
�
,`.tY
" ���+ PLTBI.�IC� WORKS STRAP PIPE ANCHOR DETAIL �� P� 221.30
,��/ DEPART?v1FNT
�'Iv'L� MARCH 2O08
�r.e
�
�
�
�
� TEMPORARY 2" GALVANIZED PIPE
� AND 2" GATE VALVE
FINISHED GRADE ELEVATION
�
INSTALL 2" PLUG ON TOP BLIND FLANGE
AFTER REMOVAL OF POLYPIG
3 FT MIN. COVER (10—INCH DIAMETER AND UNDER)
4 FT MIN. COVER (12—INCH DIAMETER AND OVER)
�
�
NEW WATER MAIN POLYPIG
�
��
�w'
�
�
,r�r
�
.n,
VERTICAL CROSS FOR POLYPIGGING STATION:
SIZE OF VERTICAL CROSS SHALL BE THE SAME AS SIZE OF MAIN LINE
�' VERTICAL CROSS (MJ X FL)
ONE BLIND FLANGE ON TOP OF CROSS WITH 2" TAP & 2" TEMPORARY BLOW—OFF ASSEMBLY
(REMOVE B�OW—OFF ASSEMBLY AND WSTALL 2" PWG AFTER REMOVAL OF CLEANING "POLY—PIG")
ONE BLIND fLANGE ON BOTTOM OF CROSS
ONE PLUG (MJ) ON END OF CROSS
'� CONCRETE BLOCKING
ALL DEBRIS AND POLYPIGS SHALL BE REMOVED FROM SUMP OF VERTICAL CROSS BEFORE
DfSiNFECTION OF NEW WATER MAIN
ila
�. „
-�? POLY PIG STATION FOR CLEANING OF s�' P� — 300.6
4 -` " + WATER MAINS
�
�
FIRE HYDRANT SHALL BE COREY—TYPE EQUAL TO IOWA F-5110 OR
COMPRESSION TYPE SUCH AS CLOW MEDALLION; M & H 929, MUELLER
SUPER CENTURION 200, AND WATEROUS PACER WITH 6" MECHANICAL
� JOINT INLET WITH LUGS. 5-1/4" MAIN VALVE OPENING. TWO 2-1/2"
HOSE CONNECTIONS NATIONAL STANDARD THREADS. 4" PUMPER
CONNECTION CITY OF SEATTLE THREADS WITH A STORZ ADAPTOR,
4.875" SEATTLE THREAD X 5" STORZ, ATTACHED WITH 1/8" STAINLESS
� STEEL CABLE. 1-1/4" PENTAGON OPERATING NUT. FIRE HYDRANT TO
BE PAINTED W�TH TWO COATS OF PAINT. KELLY—MOORE/PRESERVATIVE
PAINT No. 5780-563 DTM ACRYLIC GLOSS, SAFETY YELLOW OR
APPROVED EQUAL PUMPER CONNECTION TO FACE ROADWAY OR AS
DIRECTED BY RENTON FIRE DEPARTMENT. FIRE HYDRANT EXTENSION TO
t�ib BE USED IF REQUIRED.
MIN. 18° TO 20" BEHIND BACK OF
'� CURB OR 12" BEHIND BACK OF
3' SIDEWALK THAT IS ADJACENT TO
CURB
4.875" x 5° STORZ TWO—PIECE CAST IRON VALVE BOX WITH LUG
'� I 5'x5'x6" THICK CONCRETE PAD AROUND TYPE COVER. EQUAL TO OLYMPIC FOUNDRY C0.
HYDRANT. FINISH TO MATCH SIDEWALK. STANDARD 8" TOP SECTION WITH REGULAR BASE
�� EXPANSION JOINT AT SECTION LENGTH TO FIT. VALVE NUT EXTENSION
2��
� BACK OF SIDEWALK AS REQUIRED.
�IIII � /�CONCRETE SIDEWALK RAISED PAVEMENT MARKER TYPE 88—A
/` OR PLANTING STRIP �STIMSON�TE TWO—WAY BLUE REFLECT�VE
L'� t.
� 36" MIN
COVER CONCRETE BLOCKING
�
� O.
CONCRETE
THRUST BLOCK MAIN LWE TEE. WITH 6" FLANGE SIDE OUTLET.
� 6" GATE VALVE (FL X MJ) AWWA C-509, RESILIENT SEAT
6" DUCTILE IRON PIPE, CLASS 52 CEMENT LWED, LENGTH TO FIT
2-3/4" COR—TEN STEEL TIE RODS.
16" x 8" x 4" MININUM 1/2 YARD OF 1-1/4" WASHED DRAIN ROCK
irl� CONCRETE BEARING 1' ABOVE BOOT FLANGE. PLACE 8 MIL
BLOCK UNDER HYDRANT POLYETHYLENE FILM AROUND TOP AND SIDES OF
GRAVEL.
�
FIRE HYDRANT ASSEMB�Y
'�' LEVEL ALL GRDUND LEVEL ALL GROUND
MIN 3' RADIUS
MIN 3' RADIUS
0
� � ONE MAN ROCK �
06 1 � � '
6 � r
� � 6" CONCRETE PAD ` 6" CONCRETE PAD
�1 t
CU T ��LL
�r
HYDRANT LOCATION IN CUT OR FIL�
�r �= FIRE HYDRANT ASSEMBLY �• P� - 310.1
. -�' .
■r
.�r
MARKER MARKER MARKER
�
I � o
'"�' -� � � t
� � a
�„ � o
I o o �
� TWO LANE ROAD OFFSET ON SIDE STREETS WHERE THE
MARKER TO INDICATE HYDRANT IS WITHIN 20' OF A
WHICH SIDE OF STREET MAIN TRAVELED STREET, THE
� HYDRANT IS ON (4" FROM MARKER IS TO BE INSTALLED
DOTS OR PAINTED LINE) ON THAT MAIN STREET
�w
r�r
MARKER MARKER
+rr ^ ^ _ >
o ° o � a �
'�" o o � _ � o
� FOUR LANE ROAD OFFSET FIVE LANE ROAD OFFSET
MARKER TO INDICATE WHICH MARKER TO INDICATE WHICH
SIDE OF STREET HYDRANT IS SIDE OF STREET HYDRANT IS
ON (4" FROM DOTS OR ON (4" FROM DOTS OR
'� PAINTED LANE DIVIDER) PAINTED LANE DIVIDER)
HYDRANT MARKERS
�
� ��
ao
�
�
� ��
IYM � � 4„
RAISED PAVMENT MARKER TYPE 88 AB
STIMSONITE TWO—WAY (BLUE)
�
� �,,,� STD. PLAN - 310.3
{ ,���� + HYDRANT MARKER LAYOUT
�rr
rir
I J w I
Z
J
} CITY PRIVATE
� �.
� .� �, PIPING PIPING
ARMORCAST PRODUCTS C0. METER BOX PART I� w
a
N0. A6001946TX18 AND CAST IRON READ LID � o
�
13"x24"x2" PART N0. A6001969RCI-H7. SEE a IN UNIMPROVED RIGHT OF d
DETAIL BELOW. �WAY INSTALL METER BOX AT
� � PROPERTY LINE WITH 12" '
O ' LONG COPPER TAILPIECE. •
9" MIN � SIDEWALK I
12" MAX
� �FINISH GRADE
I
� Z Q� AMI WATER METER
��> WITH RADIO &
�o� B A T T E R Y U N I T T O B E �2 z x�
36" MW COVER N r� SUPPLIED BY THE CITY ��>
� �_ TYPE "K" SOFT ° o 0
�COPPER TUBING N`��
22-1/2' r 1-INCH
1
� NEW DUCTILE
IRON O NOTE:
WATERMAIN METER SETTER SHALL BE INSTALLED
CENTERED AND PARALLEL WITH 1" GALVANIZED
arw
METER BOX. PLUG
IF SERVICE LINE TO HOUSE IS
1-INCH TYPE "K" SOFT TO BE INSTALLED IN THE FUTURE
COPPER TUBING. LOOP INSTALL FORD C14-33 OR 44 FIPT
� DOWN TO CENTERLINE OF x COMPRESSION COUPLING
WATER MAIN TO PROVIDE
SLACK IN COPPER SERVICE
LINE TO METER.
COPPERSETTER FOR 1" METER• FORD VBH72-15W-44-44A, OR
� McDONALD BRASS: 21-415WCQQ44, OR MUELLER: 1-8-2470-2
1" BALL CORPORATION STOP WITH BALL BOTH INLET AND OUTLET WITH QUICK JOINT. PADLOCK WINGS ON
VALVE. AWWA TAPERED THREAD (CC) INLET. INLET ANGLE BALL VALVE AND SINGLE CHECK VALVE ON OUTLET.
QUICK JOINT OUTLET (1" FB1000-4-Q) OR ALL FITTINGS SHALL BE WITH QUICK JOINT.
AY MCDONALD 4701B FOR COPPER
� *FOR 5/a'x3/4" METER, PROVIDE METER ADAPTERS TO FIT WITHIN 1"
METER SETTER.
,�, N OTE:
ALL METER BOXES INSTALLED WITHIN CONCRETE OR PAVED DRIVEWAYS SHALL BE
CAST-IRON EQUAL TO OLYMPIC FOUNDARY. EXPANSION JOINTS MUSH BE INSTALLED ON
BOTH SIDES OF METER BOX.
Ww
DRILL 2" DIA. HOLE FOR AMI SENSOR
�11' PLATE AND RADIO WITH BATTERY
r�
— WATER METER o
(READER LID)
11�1 ��
�, `�
4�� ����
___L
�
�4��
�
��
� `.�1 � � 1" WATER SERVICE STD. PLA1�T - 320.1
�
O
�
CITY PRIVATE
�
PIPING PIPING
1-1/2" AND 2" WATER SERVICE DETAIL Z z
J J
> IN UNIMPROVED >
RIGHT—OF—WAY INSTALL METER
�-
� CAUTION: VALVE BOX SHOULD NOT REST ON w BOX AT PROPERTY LINE WITH W
PIPE. LATER COMPACTION IN AREA OF VALVE BOX 10 11 12 o a
COULD CAUSE THE BREAKAGE OF THE SERVICE. � 12" LONG COPPER TAILPIECE �
� �
� 9" MIN.
12" MAX.
zx
� j 3 �� 9 g�w
o �• LEAVE EXPOSED . _ o
I� � U 4 � N(") N O U ,�z��
BY PASS NOT ALLOWED
FOR IRRIGATION METERS
� o
2 3 6 � � 13
5 B CRUSHED ROCK
BASE TO SUPPORT
�' A- A DRILL 2" DIA. HOLE FOR VAULT.
TOUCHREAD DEVICE QUICK—JOINT
COUPLING x MIPT CAST IRON OR DUCTILE IRON WATERMAIN
2-1/2" MIN. FROM NEAREST NOTE:
� AND FRONT EDGE OF PIT LID THE CENTER OF THE HOLE MUST BE AT LEAST 1" FROM
� UNDERNEATH RIBS UNLESS THE RIB SPACING ALLOWS
T THE NUT TO TIGHTEN AGAINST THE OPEN SIDE OF
TYPICAL RIB r MORE THAN ONE RIB.
�
MATERIAL LIST FOR 2" SERVICE: METER LOCATED IN PLANTING STRIP MATERIAL LIST FOR 1-1/2" SERVICE METER LOCATED IN PLANTING STRIP
BETWEEN CURB & SIDEWALK BETWEEN CURB & SIDEWALK
� 1. 2" tapped tee, on new water main. 1. 2° tapped tee on new water main.
2. 4" long X 2" brass nipple with threaded ends (MIPT). 2. 4" long X 2" brass nipple with threaded ends (MIPT).
3. 2' resilient seat gate valve with threaded ends, square operating nut, 3. 2° resilient seat gate valve with threaded ends, square operating nut, and
and valve nut extension if required (see standard detail 330.1). valve nut extension if required (see standard detail 330.1).
4. Two piece cast iron valve box. Standard 8" top section with regular 4. Two piece cast iron valve box. Standard 8" top section with regular base
base section, length to fit, "lug" type cover. 2" brass bushing (MIPT x section, length to fit, "lug" type cover.
'Mr FIPT). 5. 2" X 7-1/2" hex brass bushing (MIPT x F�PT). 2 each 1-1/2" brass or
5. 2 each 2° brass or bronze nipples 6" length, threaded ends. 2 each bronze nipples 6" length, threaded ends. 2 each 1-1/2"-90' brass or
2"-90' brass or bronze elbows (FIPT x FIPT). bronze elbows (FIPT x FIPT).
6. 2�� (MIPT) x compression fitting, Ford C84-66 or equal. 6. 1-1/2" (MIPT) x compression fitting, Ford C84-66 or equal.
7. 2" soft copper tubing type K or brass nipples (MIPT x MIPT), length to 7. 1-1/2" soft copper tubing type K or brass nipples (MIPT x MIPT), length
y� fit. to fit.
8. 2" threaded brass 90' ell. 8. 1-1/2" threaded brass 90' ell, for Ford L44-77 or equal.
9. 2" Customsetter with by—pass Ford: VBH 86-12B-11-77 (x 17-3/16" 9. 1-1/2" Customsetter with by—pass Ford: VBH 86-12B-11-66 (x
), McDonald Brass: 30B715WDFF775 or Mueller 8-1427-2", with flanged 13-3/16"), McDonald Brass: 30B612WDFF665 or Mueller B-1427-1 1/2",
angle ball valve and padlock wings on inlet, and angle check valve with flanged angle ball volve and padlock wings on inlet, and angle check
outlet, ball valve on bypass with padlock wings. Customsetter shall valve outlet, boll valve on bypass with podlock wings. Customsetter shall
� have vertical inlet ond outlet. have vertical inlet and outlet.
10. Rigid meter spreader to be supplied and installed in meter setter by 10. Rigid meter spreader to be supplied and installed in meter setter by
contractor. contractor.
11. Water meter shall be supplied and installed by City of Renton upon 11. Water meter shall be supplied and installed by City of Renton upon
payment of all related water meter fee and satisfactory pressure and payment of all related water meter fee and satisfactory pressure and
� purity tests. purity tests.
12. 17"x30�� Plastic meter box equal to Mid—States Plastics, Ina BCF Series 12. 17"x30" Plastic meter box equal to Mid—States Plastics, Inc. BCF Series
MSBCF 1730-18 with 2" thick Ductile iron diamond plate cover 18"x31" MSBCF 1730-18 with 2" thick Ductile iron diamond plate cover 18"x31"
equal to Mid—States Plastics, Inc. MSCBC-1730—R with 2" drilled hole equal to Mid—States Plastics, Inc. MSCBC-1730—R with 2" drilled hole for
for touchread pit lid, and meter read lid. touchread pit lid.
13. 2" coupling (compression x FIPT) with 2" plug (MIPT), Ford C-14-66 13. 1-1/2" coupling (compression x FIPT) with 1-1/2" plug (MIPT). Ford
il� or equal. The property owner is responsible for any necessary adaptation or C-14-66 or equal. The property owner is responsible for any necessary
extension of water service. adaptation or extension of water service.
NOTE:
� ALL METER BOXES INSTALLED IN CONCRETE OR PAVED
DRIVEWAYS SHALL BE CAST—IRON EQUAL TO OLYMPIC
FOUNDARY.
� EXPANSION JOINTS MUST BE INSTALLED 12" MINIMUM ON BOTH
SIDES OF METER BOX.
+�' � s� i 1 �2" AND 2" WATER SERVICE LOCATED s�' P� — 320.2
`" IN PLANTING STRIP
�
arr
A q
�PLAN VIE�
� WATER
VALVE BOX LID WITH
EARS IN DIRECTION OF � 2" SQUARE
'� WATER MAIN AND WORD OPERATING NUT
"WATER" CAST INTO IT
12" MIN,
18" MAX,
riw 4" CONCRETE COLLAR FOR
12„ VALVES IN PAVED AREAS 4-1/4" DIA.
1/8" MIN. THICKNESS
SEE DETAIL `� 2 PIECE CAST IRON VALVE
�` BOX, RICH—SEATTLE TYPE
OR OLYMPIC FOUNDRY 1" STEEL
LENGTH AS REQUIRED
wr \_ ,�
7 1/8" MIN. THICKNESS
� 2-1/4" INSIDE MEASUREMENT
nr 2-1/4" DEPTH
VALVE OPERATING NUT
�Yw
SECTION A—A EXTENSION
iri
3
� VALVE OPERATION NUT EXTENS�ON NOTE: \`3�g>>
EXTENSIONS ARE REQUIRED WHEN VALVE NUT �
� IS MORE THAN THREE (3) FEET BELOW 3��
FINISHED GRADE. EXTENSIONS ARE TO BE A 38" MIN.
MINIMUM OF ONE (1) FOOT LONG. ONLY ONE WIDTH
EXTENSION TO BE USED PER VALVE.
�rr �WHITE POST
NOTE: ALL EXTENSIONS ARE TO BE MADE 62"
OF STEEL, SIZED AS NOTED, AND PAINTED
WITH TWO COATS OF METAL PAINT.
�
2 4"
VALVE MARKER NOTES:
+� VALVE MARKERS SHALL BE EQUAL
TO CARSONITE UTILITY MARKER
VALVE MARKER POST TO BE USED FOR ALL VALVE MARKER POST
rr MAIN LINE VALVES OUTSIDE PAVED AREAS
�
�
�` + .k f
VALVE BOX, MARKER & OPERATING �' p� — 330.1
�` NUT EXTENSION
.rr
rrr+
�r -
- - .
+r�r 11-1/4° BEND 22-1/2° BEND 45° BEND
�
CAP
rr
TEE 90° BEND
THRUST BLOCK BEARING AREA W SQUARE FEET (SEE NOTES) FOR HORIZONTAL AND DOWNWARD VERTICAL BENDS
� FIRM SILT OR
SOIL FIRM SILTY SAND COMPACT SAND COMPACT SAND & GRAVEL
90' 45' BEND 11 1/4' g0' 45' BEND 11 1/4' g0' 45' BEND 11 1/4'
FITTING BEND TEE CAP OR PLUG & 22 1/2' BEND TEE CAP OR PLUG & 22 1/2' BEND TEE CAP OR PLUG & 22 1/2'
BEND BEND BEND
� N 4" 7.0 4.2 4.2 1 J 2.9 2.1 2.1 1.0 2.2 1.6 1.6 1.0
u� 6" 13.3 9.4 9.4 3.8 6.7 4.7 4.7 1.9 5.0 3.5 3.5 1.4
w S" 23.3 16.7 16.7 6.7 11.7 8.4 8.4 3.4 8.8 6.3 6.3 2.5
a 12" 53.0 37.5 37.5 15A 26.5 18.8 18.8 7.5 20.0 14.0 14.0 5.6
AREAS CALCULATED ON 300 PSI TEST PRESSURE. 3'-0" MIN. COVER FOR WATERMAIN LESS THAN 12".
4'-0" MIN. COVER FOR WATERMAIN 12" OR GREATER.
�
MAX. HE�GHT OF THRUST BLOCK (FT) = 0.5 x DEPTH OF TRENCH
MIN. HEIGHT OF THRUST BLOCK (FT) = O.D. PIPE + 1.0'
�
�
i
� / I
� �
o,
�
2
�PRtN
0E0
� �Np�S��� THRUST BLOCK BEARING
AREA REFERS TO THE
FACE OF BLOCK MEASURED
iN SqUARE FEET
NOTES:
rrr
L LOCATION AND SIZE OF BLOCKING FOR PIPE LARGER THAN 12"DIAMETER AND FOR SOIL TYPES
DIFFERENT THAN SHOWN SHALL BE DETERMWED BY THE ENGINEER.
2. ALL BLOCKING SHALL BE POURED IN PLACE AGAWST UNDISTURBED NATNE GROUND.
�
3. ALL POURED THRUST BLOCKS SHALL BE BACKFILLED AfTER MIN. 1 DAY. PRESSURE TESTWG
SHALL OCCUR AFTER CONCRETE HAS REACHED NOMINAL COMPRESSIVE STRENGTH.
4. ALL BLOCKWG SHALL BE CONCRETE CL 5 (1-i/z").
� 5. BLOCKING AGAINST FITTINGS SHALL BEAR AGAINST THE GREATEST FITTING SURFACE AREA
POSSIBLE, BUT SHALL NOT COVER OR ENCLOSE BELL ENDS, JOINT BOLTS OR GLANDS
REASONABLE ACCESS TO BOLTS AND GLANDS SHALL BE PROVIDED.
1�
`"� + ;� + ' HORIZONTAE AND DOWNWARD STD. PLAN - 330.2
O
VERTICAL BENDS
�
�rr►
� Where shown on the plans or in the specifications or required by
the Engineer, joint restraint system (shackle rods) shall be used.
All joints restraint moterials used shall be those manufoctured by
Star National Products, 1323 Holly Avenue, PO Box 258,
Columbus, Ohio 43216 unless an equal alternate is approved in
� writing by the Engineer.
Materials
Steel Twes
High strength low—alloy steel (cor—ten),
i� ASiM A588 heat—treoted.
1.Tiebolt:
ASTM A588, Grade B, Cor—Ten, equal to SuperStar Tielbolt Installation:
SST 7 : 5/8" for 2" ond 3" mechanical joints (M.J.) with eye for 5/8" rod Install the joint restraint system in accordance with the Manufacturer's
y� SST 7 : 3/4" for 4" to 12° M.J. with eye for 3/4" rod instructions so all joints are mechanically locked together to prevent joint
SST 756 : 3/4" for 14" to 24" M.J. with eye for 3/4" rod separation.
SST 747 : 3/4" for 4" ta 12" M.J. with eye for 7/8" ond 1" rod Tiebolts shall be installed to pull against the mechanical joint body and
SST 757 : 3/4" for 14" to 24�� M.J. with eye for 7/8" and 1" rod not the M.J. follower. Tor ue nuts ot 75-90 foot
SST 778: 1" for 30" to 36" M.J. with eye for 1" rad 4 pounds for 3/4" nuts.
� 2.Tienut: Hex Nut Install tiecouplings with both rods threaded equal distance into
ASTM A588, Grade B, Cor—Ten, equal to SuperStar Tienut tiecouplings. Arrange tierods symmetrically around the pipe.
SS8 for 5/8", 3/4", 7/6", 1" Tiebolt and Tierod Where a Manufacturer's mechanical joint valve or fitting is supplied with
3.Tiecoupling with Tiestop Pin slots for "T" bolts instead of holes, a flanged valve with a flange by
ASTM A568, Grade B, Cor—Ten, equal to SuperStar Tiecoupling mechanicol joint adaptor shall be used instead, so as to provide adequate
� 5510 for 5/8", 3/4", 7/8", 1" Tierod space for locating tiebolt.
4.Tierod: Where a continuous run of pipe is required to be restrained, no run of
Continuous threaded rod for cutting to desired lengths restroined pipe sholl be greater than 60 feet in length betwee fittings.
ASTM A588, Grade B, Cor—Ten, equal to SuperStar Tierod Insert long body salid sleeves as required on langer runs to keep tierod
� SS12 for 5/8", 3/4", 7/6", 1"
lengths to the 60 foot maximum.
Pipe used in continuously restrained runs shall be mechanical joint pipe
5.Tiewasher and tiebolts shall be installed as rod guides at eoch joint.
ASTM A588, Grade B, Cor—Ten, equal to SuperStar Tiewasher
SS17 for 5/8", 3/4", 7/8", 1" round flat washer
�
� Pipe Test
Size Pressure Number and Size of Rods
Inches PSI 2 4 6 8 10 12 14 24
2 25� 3I4"
3 250 3/4"
� 4 250 3/4"
6 250 3/4"
8 250 3!4"
10 250 3/4"
12 250 3/4"
y�, 14 250 3/4"
16 250 314"
18 250 3/4"
20 250 3/4"
24 250 3A4"
� � 200 3/d"
� 200 �,�
42 200 �"
48 200 �^
rilr
�
2 5
3 4 1
�
�
`�� �� `' STD. PLAN - SS0.5
+�► '�w� �" � 1 r i I" �h� �Itil:.; SHACKLE RODS
� =�R ' Ii�;� �li'I':v;[ �T AND TIE BOLTS
f � `�1,?Ic:}� . ,;C�
'N T �_
rrr
�rr
rrr
CONCRETE DEAD MAN BLOCKING WITH SHACKLE RODS TO
CAP, BLOCK SHALL BE POURED AGAINST UNDISTURBED
� EARTH, SIZE OF BLOCK TO BE DETERMWED BASED ON TEST
PRESSURE OF WATER LINE AND SOIL CHARACTERISTICS.
CAST IRON CAP OR PLUG WITH
'� 2" IPS TAP SHALL BE A
I ROCKWELL 482 END CAP
COUPLING.
"� WATER MAW 2" GALVANIZED IRON PIPE
� AS REQUIRED.
�
2" CLOSE NIPPLE
2" 90° ELBOW 2" GALVANIZED IRON PIPE, 12"
LONG.
�
PLAN
r
�w
�' TWO PIECE CAST IRON VALVE BOX VALVE NUT EXTENSION IF REQUIRED
EQUAL TO RICH VALVE C0. STANDARD (SEE DWG BR46 / PAGE B090)
8" TOP SECTION, WITH REGULAR
BASE SECTION LENGTH TO FIT. INSTALL 2" 90' ELBOW, SCREWED
+�r � 2" PLUG, SCREWED
18"
rwr 2" GALVANIZED IRON PIPE 12" LONG � 2" GALVANIZED IRON PIPE
AS REQUIRED.
2" RESILIENT GATE
VALVE, SCREWED INSTALL 2" 90' ELBOW,
�, - � SCREWED
2" GALVANIZED IRON
PIPE AS REQUIRED.
�
ELEVATION
�
�
■r
wr , .. + 2" BLOW-OFF
STD. PLAN - 340.2
"" TEMPORARY ASSEMBLY
�
.r
wr
+� 2" OPEN PATTERN, RETURN BEND - 180°
2" BEEHIVE STRAINER 2" GALVANIZED IRON PIPE FIELD
LOCATE
� CUT OPENING AS REQUIRED,
AFTER INSTALLATION, GROUT 17"x30" PLASTIC METER BOX EQUAL TO MID STATES
AROUND PIPE 6" MAX. PLASTIC, BCF SERIES 1730-18 WITH 2" THICK DUCTILE
� IRON DIAMOND PLATE. 18"x31" MSCBC 1730R
+�Ir
1" CLOSE NIPPLE
18" 1" UNION� 1" BRONZE GATE VALVE, SCREW EQUAL
L 1" NIPPLE TO RED-WHITE VALVE CORP. FIG N0.280
'� 1" UNION
WSTALL COUPLING COPPER TO MALE IRON
1 - 2"X1" REDUCER� � PIPE-FORD C28-44 OR EQUAL.
2 - 2" 9D' BENDS AS 2" RESILIENT SEAT GATE VALVE
� SWING JOINT WITH THREADED ENDS
/�2" BRASS NIPPLE - 6" LONG
�- / (MiPT X MIPT)
12" MIN. � 2' IRON PIPE THREAD CORPORATION STOP WITH
� � �- 90' BEND FOR COPPER. FORD TYPE F1000 PACK
• JOINT CTS.
1" GALVANIZED IRON
PIPE TO FIT
� 1" 90' ELBOW DOUDLE STRAP SERVICE CLAMP WITH
2" IPS TAP TO FIT, EQUAL TO MEULLER C0.
1" TYPE "K" SOFT COPPER TUBING 2"x1" BRASS BUSHING
�
1" COMBINATION AIR RELEASE & VACUUM VALVE,
SCREWED. APCO N0. 143C OR EQUAL.
�
WASHED GRAVEL, PASSING 1-1/2" AND RETAWED ON
1/4" MESH FOR DRAIN
�
NOTE:
�' AIR AND VACUUM RELEASE VALVE ASSEMBLY SHALL BE
INSTALLED AT HIGHEST POINT OF LWE. IF HIGH POINT FALLS
IN A LOCATION WHERE ASSEMBLY CANNOT BE INSTALLED,
PROVIDE ADDITIONAL DEPTH OF UNE TO CREATE A HIGH
,�, POINT AT A LOCATION WHERE ASSEMBLY CAN BE INSTALLED.
LOCATE ARE-VACUUM METER BOX OUTSIDE OF TRAFFIC
AREAS, IN PLANTING STRIPS, BEHIND CURB OR SIDEWALK.
�
�r
i11�f
� � � � 1" AIR & VACUUM RELEASE STD• PLAN - 340.3
`" ASSEMBLY
�
�rr
� MANHOLE FRAME AND COVER
6�� SEE STD. PLAN 401
� 24�� ADJUSTMENT RINGS (2" MIN.)
12�� MAX. SEE NOTE 6
MORTAR JOINT(S) (3/8" MIN.)
.
:.
wrr
� SEE NOTE 5
CONE (ECCENTRIC)
RUBBER GASKETED JOINTS IN
�r
ACCORDANCE WITH ASTM C-443
�
`C'
� ' SHALL BEP�NCLUDEDYLENE STEPS
6-1/2"�{
7' MIN.
'e
'�wr `A'
CONCRETE RISER BY PIPE INC.,
° OR APPROVED EQUAL.
� �
12�� (TYP) LADDER—POLYPROPYLENE
t SHALL BE ATTACHED TO MANHOLE
� i �
MAX. PIPE SIZE — 'E'
y
wr
CONCRETE SHELF
1�
_ a
� o ''e PRECAST BASE SECTION
� OR CAST IN SHELF.
�B,
�,,, � •NOT TO SCALE
�A, ,B> <�, �p, <E,
48" MH 48" 6" MIN. 5"MIN 24" MIN. 21" I.D.
� 54" MH 54" 8" MIN. 5.5" MIN. 24" MIN. 24" I.D.
60" MH 60" 8" MIN. 6" MIN. 42" MIN. 30" I.D.
NOTES:
ai�r
1. STEPS TO BE POLYPROPYLENE SAFETY STEPS.
2. STEPS ARE TO BE IN PLACE BEFORE MANHOLE SECTIONS ARE INSTALLED.
3. CASTING SHALL BE PER STD. PLAN 401.
rrl�r 4. MANHOLE SECTIONS TO BE OF REINFORCED PRECAST CONCRETE.
5. ALL JOINTS BETWEEN THE CONE, RISER RINGS AND CASTING SHALL BE GROUTED.
6. ADJUSTMENT OF THE CASTING TO GRADE SHALL BE PER STD PLAN 106. THE USE OF SHIMS IS PROHIBITED.
7. SANITARY SEWER MANHOLES SHALL HAVE ALL INTERIOR SURFACES, INCLUDING CHANNELING,
� COATED (SEALED) WITH A HIGH SOLIDS URETHANE COATING; WASSER MC—AROSHIELD OR
APPROVED EQUAL; COLOR OF COATING SHALL BE WHITE.
8. RUBBER GASKETED JOINTS SHALL BE IN CONFORMANCE WITH ASTM C-443.
9. CHANNEL HEIGHT SHALL BE A MINIMUM OF 3/4 OF THE INSIDE DIAMETER OF THE LARGEST PIPE.
10. CONNECTIONS TO MANHOLE SHALL BE MADE USING GPK ADAPTOR, KOR—N—SEAL BOOTS OR
+�► APPROVED EQUAL.
11. IN UNIMPROVED AREAS, MANHOLES SHALL EXTEND A MINIMUM OF 6" AND A MAXIMUM OF 12"
ABOVE FINISHED GRADE OR MUST HAVE A MINIMUM 2' DIAMETER CONCRETE RING POURED AT GRADE.
IN PAVED AREAS, COVER MUST SLOPE IN ALL DIRECTIONS TO MATCH PAVING.
+r 12. MANHOLES OVER 20' DEEP SHALL BE A MINIMUM OF 60" IN DIAMETER.
STD. PLAN-400.1
� � PUBLIC WORKS APPROVED:
� �EPARTMENT STANDARD SANITARY MANHOLE
Gregg2immerman
v�bu�worvs ndm�o�n„ow DATE
�
�
� MANHOLE FRAME AND COVER
PER DRAWING 401.
+rrv ADJUSTMENT RINGS (2" MIN.)
SEE NOTE 6
MORTAR JOINT(S)
6"
rr (3/8" MIN. —1" MAX.) � 4" MIN. TO
SEE NOTE 5 0 12" MAX.
Q a. .
o . . o. . 8„
a . . p
a a
� I
f�—24"—� x
Q
Q p a �
�
�
� O �
�2" v N O
� ' J Z
m �
� p Q
a Q N
> �
4 0 1� _� 54"
� �'a . � � � � � � d
o . v. o
o a
o a o .
�p . . . .aV � � 'D � v
e vo � � �° � o� � '
v
�IlMJ o �. p: a V
� . D ." .a. a� � p . . .v Q� .a � � . .
Q o a o 6"
' �? '.. . ' p.. .Q �. . : � . .. . d : . . � � p: �. .
�
6"
�
NOTES:
wr 1. STEPS TO BE POLYPROPYLENE SAFETY STEPS.
2. STEPS ARE TO BE IN PLACE BEFORE MANHOLE SECTIONS ARE INSTALLED.
3. CASTING SHALL BE PER STD. PLAN 401.
4. MANHOLE SECTIONS TO BE OF REINFORCED PRECAST CONCRETE.
�, 5. ALL JOINTS BETWEEN THE CONE, RISER RINGS AND CASTING SHALL BE GROUTED.
6. ADJUSTMENT OF THE CASTING TO GRADE SHALL BE PER STD PLAN 106.
THE USE OF SHIMS IS PROHIBITED.
7. SANITARY SEWER MANHOLES SHALL HAVE ALL INTERIOR SURFACES, INCLUDING CHANNELING,
COATED (SEALED) WITH A HIGH SOLIDS URETHANE COATING; WASSER
� MC—AROSHIELD OR APPROVED EQUAL; COLOR OF COATING SHALL BE WHITE.
8. RUBBER GASKETED JOINTS SHALL BE IN CONFORMANCE WITH ASTM C-443.
9. CHANNEL HEIGHT SHALL BE A MINIMUM OF 3/4 THE INSIDE DIAMETER OF THE LARGEST PIPE.
10. CONNECTIONS TO MANHOLE SHALL BE MADE USING GPK ADAPTOR, KOR—N—SEAL
+r BOOTS OR APPROVED EQUAL.
11. IN UNIMPROVED AREAS, MANHOLES SHALL EXTEND A MINIMUM OF 6" AND A MAXIMUM OF
12" ABOVE FINISHED GRADE OR MUST HAVE A MINIMUM 2' DIAMETER CONCRETE RINGS
POURED AT GRADE. IN PAVED AREAS, COVER MUST SLOPE IN ALL DIRECTIONS TO MATCH PAVING.
.w
�
STD.PLAN-400.2
�♦,,� PUBLIC WORKS SANITARY MANHOLE APPROVED:
+w► '��� DEPARTMENT SHALLOW
Gregg Zimmerman
Public Wwks AEminishata DATE
�
�
�.
�, MANHOLE FRAME AND COVER
PER STD. PLAN 401.
rrr
...
ADJUSTMENT RINGS 2 MIN.)
SEE NOTE 4
� MORTAR JOINT S 4" MIN. TO
� ) 24�� 12" MAX. x
(3/8" MIN. — 1" MAX.) � Q
�
SEE NOTE 3 ADAPTOR -
COLLAR .: �
yrr
12" PIPE '. , 16" �
PRECAST VALVE RUBBER (MAX.) �
CHAMBER CONE GASKET ,. �
R.C.P. OR
z
EQUAL 19 5" �
� y _. r D n�_ . . � . �
.a . � .. . ' � i"')
D � >'� � � P�D ' s
0
�D . . , . . ,6 . �� a� � .
� e D` . a> �. � � d
�
a D D
� . � ' . � . . '�a�P .
� P , D �.p , . .� � ► . � .o.' n
n
' .. a � . � � d � 'D. 'a.. ' � ' . .
. .e. s . �s ' p . , , B . p.. p: .p.
e e 6�� MIN.
D p 'p ° °'.
o �D.P . ► . .'eo.�. >�.
WU�
48"
rr�r
POURED—IN—PLACE BASE
Ww
NOTES:
+�rr
1. CASTING SHALL BE PER STD. PLAN 401.
2. CONE SECTION TO BE OF REINFORCED PRECAST CONCRETE.
3. ALL JOINTS BETWEEN THE CONE, RISER RINGS AND CASTING SHALL BE GROUTED.
� 4. ADJUSTMENT OF THE CASTING TO GRADE SHALL BE PER STD PLAN 106.
THE USE OF SHIMS IS PROHIBITED.
5. SANITARY SEWER MANHOLES SHALL HAVE ALL INTERIOR SURFACES, INCLUDING CHANNELING,
COATED (SEALED) WITH A HIGH SOLIDS URETHANE COATING; WASSER
MC—AROSHIELD OR APPROVED EQUAL; COLOR OF COATING SHALL BE WHITE.
'� 6. RUBBER GASKETED JOINTS SHALL BE IN CONFORMANCE WITH ASTM C-443.
7. CHANNEL HEIGHT SHALL BE A MINIMUM OF 3/4 THE INSIDE DIAMETER OF THE LARGEST PIPE.
8. CONNECTIONS TO MANHOLE SHALL BE MADE USING GPK ADAPTOR, KOR—N—SEAL
BOOTS OR APPROVED EQUAL.
+� 9. IN UNIMPROVED AREAS, MANHOLES SHALL EXTEND A MINIMUM OF 6" AND A MAXIMUM OF
12" ABOVE FINISHED GRADE OR MUST HAVE A MINIMUM 2' DIAMETER CONCRETE RINGS
POURED AT GRADE. IN PAVED AREAS, COVER MUST SLOPE IN ALL DIRECTIONS TO MATCH PAVING.
vr►
�
STD.PLAN-400.3
,ti� PUBLIC WORKS SANITARY MANHOLE APPROVED:
«w sI� DEPARTMENT EXTRA SHALLOW
Gregg2immerman
Fublic Works Atlminirtrrtor DATE
�
�r
B�LTH�LES — 3 PLCS
s�aon Noar EQUALLY SPACED 120°
Neaaor isv3 APART ❑N 23 1/16" C586rtrt)
� DIA B,C, CSEE DETAIL)
�, x aAivaiow
�
� oeu�eoo
N�f e � 6 ��
s '�
�6 ��V
a
�
RENTON y
g�
�
�
o �
� ���p SEWER yti � 5
�} P
F�I �^~
S
� MADE IN 11SA COVER BOTTOM VIEW
COVER & FRAME
�
PLAN VIEW
25" DIA,
C635r�r�] 1° C3) BLT S❑C, CA�LEN HEAD)
"� �25r�r�] 5/8"—il X 1.5 SS
3/4" RUBBER WASHER
C19r�m7
rrie
8 3/4" 2 1/2"
C222r�r�] C64r,r,]
TYP
�+ COVER SECTION VIEW
�
BOLTING DETAIL
26 1/2" DIA
C673r�r�7
+�' 25 1/4" DIA
C641Mr�7 1 1/16" 1�4� 1 1/16'
C27MM� �6Mf`l�
1/4" C6Mr�) ➢IA � C27Mr�]
NE�PRENE GASKET
�
� � 6� 1/8"
C152Mr�7 [3roro]
-1 vs�
� 5�gd � CR3MM]
23 3/8" DIA CL �PEN
�16�,�,� C594MM] GASKET GROOVE DETAIL
27 5/16" DIA
� C694r,r�]
34 1/8" DIA
C867ri"'� NOTES:
� FRAME SECTION VIEW 1. ALL COVERS SHALL BE LOCKING LID PER EAST
JORDAN IRON WORKS INC. No. 3717C1 OR EQUAL.
2. USE FRAME AND COVER FOR STORM (SPECIFY
"DRAIN" ON COVER), SANITARY (SPECIFY
� "SEWER"), OR WATER (SPECIFY "WATER").
STD. PLAN-401
�'` .•�,� PUBLIC WORKS MANHOLE FRAME AND COVER APPROVED:
'S!� DEPARTMENT
Gregg2immerman
Public Works Adminis[a[or DATE
�
�
wr
RECESSED Not to Scale
.r LIFT POCKET
o � o FRAME
3/4" LETTERING "SEWER" � —� DIAMETER 1'-0"
� � � � � �
�' e � SEWER e (2) BOLT SOC. (ALLEN HEAD)
5/8" — 11 X 1.5 STAINLESS
o � o � o STEEL
REF. PART #00981177
� � � �
1-3/16" �
8" CLASS "B" �
10-1 2" SAND OR
� � 5�$„ ASPHALT EXPANDABLE
= FOAM
�i4"�12-1/2"� _
1' �
�
� � 1-1/8��
�
2-1/4" BOLT DETAIL
�„ 45' (1/8) BEND
�— 14% �
I I�f'-12-3 4'
�r � 5�ti�
i—i/s" $„ �P`�
G�
++�r �P�
,`O
11" ,LF,
� 12-1/4" �5�
OJ
CAST IRON RING AND COVER �P� PIPE MATERIAL AS SPECIFIED
G�' BY THE ENGINEER
�rr
�r
�— 45' (1/8) BEND
�
�
NOTES:
1. 8" AND 6" CLEAN—OUT RINGS AND COVERS ON SEWER MAINS SHALL BE EAST JORDAN IRON WORKS, INC.
No. 3698 (PRODUCT N0. 00369803) OR APPROVED EQUAL. CLEAN OUT SHALL BE A WATER TIGHT ASSEMBLY.
rrs 2. IN UNIMPROVED AREAS, POUR A 1'-0" THICK, 2'-0" SQUARE
CONCRETE, CLASS 3000, PAD AROUND THE RING AND COVER.
w�e
STD. PLAN-403.1
�` .•� PUBLIC WORKS 8" OR 6" CLEANOUT APPROVED:
"� °EPARTMENT FOR SANITARY SEWER MAIN
Gregg Zimmerman
� Public Works AAministtamr DATE
�
�r
rrr
� W (SEE NOTE 7) --- LIMITS OF PIPE ZONE
'r�' '�%,�' .� �
��� ,�/� O�,
,.�'' ,�'� ,�''�
�
BEDDING MATERIAL FOR �
SANITARY SEWER PIPE ��i� O.D. OF PIPE
(SEE NOTE 5) �
�" FOUNDATION LEVEL ,�
6"
�. --�-
BEDDING FOR SANITARY SEWER PIPE
�.
�
NOTES:
� 1. PROVIDE UNIFORM SUPPORT UNDER BARREL.
2. HAND TAMP UNDER HAUNCHES.
� 3. COMPACT BEDDING MATERIAL TO 959 MAX. DENSITY EXCEPT DIRECTLY
OVER PIPE. HAND TAMP ONLY.
4. PIPE INSTALLATION SHALL BE PER SECTION 7-08 OF THE
� STANDARD SPECIFICATIONS.
5. PIPE ZONE MATERIAL SHALI BE PER SECTION 9-03.12(3)'
OF THE STANDARD SPECIFICATIONS OR PEA GRAVEL.
rrr
6. PIPE MUST BE ANCHORED IN SUCH A MANNER AS TO ENSURE FLOW
LINE IS MAINTAINED.
,�„ 7. TRENCH WIDTH SHALL BE PER SECTION 2-09.4 OF THE
STANDARD SPECIFICATIONS.
+rr
�
�rr
�
STD.PLAN-405
Pusuc woRKs PIPE BEDDING APP OVED:
� � DEPARTMENT
FOR SANITARY SEWERS �
�
��+ DATE '
�
�rr
f`�� I
I I"�"—EX. SEWER MAIN
� PROPERTY UNE
, .._......._.._..�..._.._..�
��SPOOI (LENGiH AS NEEDEQ) ?
� �
:o � �,_0,
+�r/ 6" SEVYER STUBE M , � �t1711RE 4' S1DE SEWER
�C----------�
�SEWER MAfN TEE X 6" TEE � j � 2��x 4" S7UD MARKING POST PAINTED
i�11 6" CAP J WHITE IMITH THE WORO "SEIMER" S7ENqLED
i IN 3" HIGH BLAqC LETTERS AND �16 1MRE
W WRAPPED AROUND THE STUD ANO
� � EXTENDED TO THE TOP OF THE STUO.
i i �COUPLING (TYP,) } �
� t�.� ; :
' i
� � 8'X6'X6" SURFACE C�EANOUT W17H CAST IRON RINC AND COYER
� ( (EAST JORDAN IRON WORKS PRODUCT N0. 00367502 OR
APPROVED EQUAL, SPECIFY 'SEWER' ON lID),
� � � (SEE STD. PLAN 403.1 FOR INSTALLAT10P1)
�
Mr I
r ��
---
_����_�.________�_�_�____T_J __.____�_�
�___� JM EAGLE THREADED CLEf1N—OUt ADAPTER HUB
BEND AS dc PLUG (OR APPROVED EQUAL)
rwr REQUIRED
d4ST1NG SANITARY
SEWER MNN `2 07L M1N, SLO �
` �FUTURE 4" SIDE SEWER
� �8" SEWER STtJB B"X6"XB' WYE L��RE 6"x 4�� REDUCER
`SEWER MNN SIZE X B" TEE
�
acc�r� F PRoc��acc �ar a� �y�FR.��NNE�n�ws ro onsnt�,C�:f. •A•.
A VITRIFiEO CLAY MAIN — CUT IN A NEW P� 'TEE" UStNG 'STRONG—BACK' FLEXIBLE CflUPUNGS (FERNCO OR APPROVED EQUAI).
� H. CONCRETE MAIN — CUT IN A NEW PVC `TEE' USING "STRONG—BACK' FLEIQBLE COUPLINGS (FERNCO OR APPROVED EOIIAI.).
C• PVC dc C900 PVC MAIN — CUT IN NEW TEE USiNG RIGID COUPLINGS OR CORE—�RILLED NA'iH A ROMAC SADDLE
(OR MPROVE� EQUAL).
+�' D. DUCTiLE IRON MAIN — CORE—DRILLED WI7H A ROMAC SADDLE (OR APPROVED EQUAL)
E. MANHOLE CONNECTIQIV — ALL CONNEC110NS TO MANHOLES SHALL BE AT MANUFACTURED KNOCK—OUTS OR 7HE STRUCTURE
'+ SHALL BE CORE—DRILLED.
�
�
S
r�t 3000 PSI M1X /ky ����N Ol�
B�QCKI G �}.�'�9,5 /���,pa{.,�9�,OG`�
i �' /�� �.G��
� ' _______27i MIN SLOPE
s.. .�
HORiZONTAL
6" MIN. MA�R `SEWER MAIN
� CONGRETE BLOCK�NG ANC�F
IYPI A ID CF R
NOTE: UNLESS OTHERIMSE SHOWN aN PLAN, SIDE SEWER SHALL HAVE A MINIMUM 2.5` COVER AT PROPERTY UNE OR 3-5'
rrr LOWER 7HAN 1HE LQIkEST HOUSE ELEVATION, MMHICHEVER IS LOWER.
STANDARD SIDE SEWER sT�.Pu►N-ao6.i
,� �•� PUBLIC WORKS INSTALLATION APP °`
"��1 DEPARTMENT �
(SEWER MAIN TO PROPERTY LINEj ��� � pA
� �
� �.
Mr.
�
�S
' 1s
rr
�.
SPECIAL CONTRACT
I N FORMATI ON
_
�.
�
_
_
�
_
,.
_
_
_
�
r
�
r.
SPECIAL CONTRACT INFORMATION
r
Construction Sequencin�
r,,, 1. Suggested sequencing of utility installation is shown for each block on drawing no. G-6 of the
project plans. This sequence takes into account existing utilities that need to be abandoned prior
� to installing new utilities. Project sections 1 through 5 shall be done in the order shown. Sections
.. 6 through 21 are not listed in the table by order of completion. Work in these areas shall be
sequenced at the contractor's discretion however, the contractor shall minimize impact to the
neighborhood by limiting work to a single street as feasible.
�
2. Contractor may propose an alternative sequence for the City's approval in accordance with the
�r.
contract documents and access requirements on drawing no. G-6 of the project plans.
� 3. No Construction work shall take place on Renton Ave S and Cedar Ave S simultaneously. Renton
� Ave S and Cedar Ave S are the only streets that can be used by the community for ingress and
egress.
ar. 4. Vehicular access shall be maintained through the intersection of S 7th St and Renton Ave S. All
traffic ingressing and egressing the Renton Hill neighborhood must pass through this
intersection.
�
� 5. Temporary asphalt restoration materials and requirements shall be per Special Provision 5-06.
� 6. Prior to every weekend and holiday, the contractor shall patch utility trenches within the
9 construction site with HMA and leave the site in a clean and orderly condition. Any traffic
� detours shall be maintained in accordance with the approved traffic control plan.
Traffic Control Requirements
�
1. Contractor shall submit a traffic control plan for each work zone per note 4 on drawing G-2. The
� plan shall show detour routes for temporary road closures.
�
2. All roads shall be opened to traffic at the end of each work day.
�01 3. Contractor shall place barricades marked "Local Access Only" at the end of each block where
� work in being performed and provide flaggers to coordinate local access traffic. Contractor shall
� notify residents of limited access a minimum of 72 hours in advance of the work.
4. Prior to beginning any work, the contractor shall provide the City with a map showing the
�,,,, proposed haul route between the staging area and the project site.
� Workin� Hours
1. Working hours shall be an 8-hour work period between 7:00 a.m. and 5:00 p.m., Monday
� through Friday, per section 1-08.0(2) of the Special Provisions.
�
`` Construction Sta�ing
�
,� The Renton Hill neighborhood has narrow roadways and limited residential parking. Therefore, within the existing
rights-of-way, the contractor shall only stage enough construction materials for the current day's work.
rr
i!
To allow for the storage of construction related materials (pipe, structures, aggregates, etc.)for this project,the City
� of Renton is providing a construction staging area located at the Cedar River pog Park property. This staging area is
located approximately%2 mile from the project area and can be accessed via residential roads (see map below).The
staging area will be adjacent to an existing Renton Parks Department landscape materials storage area (see next
Wr, page). The staging area currently contains two piles of vegetation-covered soil that will need to be removed and
disposed of by the contractor.
f
.. If the Contractor chooses to utilize the City-provided staging area then the contractor shall adhere to the following
conditions:
�.. • The contractor shall remove and dispose of existing vegetation-covered dirt piles(approximately
360 cubic yards).
• Coordinate with the City to secure the existing security gate in a way that provides access for both
1� parties(example: provide chain with city and contractor locks in tandem). The City's security gate
must be kept closed when not accessing or egressing the staging area to prevent public access.
� • The contractor shall provide temporary fencing for their storage area.
r. • The contractor shall maintain access to the Parks Department landscape materials storage area.
+r.
The contractor shall take all precautions to secure their materials and equipment within the City-provided staging
area. The contractor is advised that this staging area is adjacent to a forested area that is known to be frequented by
� homeless people.
�.., .. �
��. ,���� �` �
# ' ` }
.
� �� � ,;, ° � �
� � � � � �
_ .,i . �ax,r �, . � � ,,,� �'�
� _ .,,, ��- n �. .. � � xy�
� , h _.�v, : .�- �.... x r � , '_ �
�� M
.. ��� � � �� �� � �
�'
� ��"A � � ���",uL"�o.�,.. � �� � ���5 5� � .�.
.
9
� ,,.
.
r" �,• . ��.
,
, � , �
� , . �
� : � �.��
d , ' .,., • �,
�N✓ ���� � � ��r� � � � ��� r"� �r
� ����� � � ���. � �
. ,
� ;.' w �,d
� � : „�, a�.
r..�.it°� (� .� ' °� j' t ,�.Ar _. . � .,� r,:.,� �' .`;:. :.
.
.
�-� � ,at' . '1 ,� .Y.
1w11 � � � {£ ��¢yS' �'i
� '� � .� ��. ��, �i� �, . � �' � ..
� , �� � �«-. � ��
s'� ;...��` '` ��, � ��+� `'�;,;.
a -
�"t e
T � �. � ��. „<�
s � � �,a' _"`""' �
_ --- ,� ,
� � � � �' ~� �v'Y ���' �,� � �K �,
k .:.;' � .? :�R� � .a.�^• ,�^' M' f �',�+, ,"� .�� �
. .-..
� � y�
l � .�1a d...u; �.ryt'���x� � � R
� .w. '
� y�� ,,3 � e-._ �`� �+. . 7 +�.� �d^" �(-`�}� .'�A �
� � _� � .'9i e �L..r ��.�5+.� ����.. p�1 �� r�4, � � � � �� � V� A«*'�:�A�
�` ! ,; _.� '�,"� �,�� �
�,� � ^� � — F � �''� t
q- � �..i �' �, �
� ,., �
+ r�.��, �"" {��� i� ,�±,�
. _
; a._•f. '�. ,k„ .
..� <,
�.�....
.. , ., � .,� r .. .�..� ..,.i.."��
�
" Construction Sta�in�Area
r
� ��� �� ��
a��' „"�, �,
� „7: � � .. . � � "�.�:��
� ..� �'.:- � � .
��� �� .� �,�,. ,r� � £�'� ,��;.
� � �,':
#�+� .. @ry • � .� ��� ��� �S& _
� �� 4 .� �r
� �
�" ,��" ��1" � ,
5 �
� �}
a �
{ F
��`" .::� '� � °
,.
�
� �
� ��A
17L `Jf't5.��
� �
s� ��� �'�t
�
� fi
� �',
-,� � p���� ��pi,
,, ..
, . :.
, „
� I
'� `� 4 �'�` �° .�
�
Y,��'+d.,`� ��,^k. ' _.�`wM�q� � �' .
� f, � �
�g 4
- � 3 . � ���F �s7� W Pk�... ,�
RMro "! �
v. �.�
� � � �; � � � �,
. � n� ��v'�� � a ',�� ;i, � l+�s' � '
. �°
"� �
,.�„� . �i�.� . �., _ ,.
� �`4���� J, ��'. � :K:.
� r_45¢... . .
�". '..�,#� ... � ��..
�'. r I
�V� `
� `tiw �. �$•.ipa� �' k 4
�
�
�
�
�
�
�
�
� `.
�
v
�
�
.�
ADDENDA
�
�
_
_
`
..
�
�
r
n.
rs
"""` Addendum No. l
Issued: 9/14/2017
Page 1 of 2
� City of Renton
Renton Hill Utility Replacement Project
"� WTR-27-3824
WWP-27-3824
�,, SWP-27-3824
,,,, ADDENDUM N0. 1
Issued:September 14, 2017
"� To All Contract Document Holders:
You are hereby notified of the following changes, deletions, additions, corrections and clarifications to
� the plans, specifications and other documents comprising the Contract Documents for the City of
Renton, Renton Hill Utility Replacement project.
�.
Bid Proposal
�
UPDATE THE FOLLOWING:
� Special Provisions section 1-09.14(2)CA Furnish and Install 8",6",and 4"CI 52 DI Water Pipe&Fittings w/Polywrap
(Bid Item C-15,G16,&G17)
�"' -and-
�
Special Provisions section 1-09.14(2)CH Connection to Existing Water Main(Bid Item C-26)
WITH THE FOLLOWING:
�
Bid items G15,G16,G17,and G26 shall include plugging abandoned utilities.
�.
End revisions for Addendum No. 1
�
�
�
�
� Addendum Nol Renton Hill Utilitv Reolacement.docx JDH
"�`' Addendum No. 1
Issued:9/14/2017
.r
Page 2 of 2
Addendum Nv. 1 is hereby made a part of the Contract Documents, and its terms and conditions
are fully binding on the Contract Document holder. He/she shall acknowledge receipt of
� Addendum No. 1 by signing in Che space provided below and attaching it to his/he�proposal.
,� This Addendum No, l must be atknowled�ed in the bid.
CITY OF RENT N
�
�" J n Hobson, Praject Manager
Issued September 14, 201?
�
� Received and Acknvwledged:
������'��G�� ��� ����nr� �' ��,✓�-h wc��IcS, f r1 C
� Company Name ��_�.----�
,�'"
� Signature of pe y cei ' ndum
U�C� ��(�i G���1.�'
"�' Title
�, ��.x�m1�� 15, �'�I�
Date
�
�
.rr
r
�
�
'1M Rddendum tVai Renton Hill Utilitv Replacement.dncr 1DH