Loading...
HomeMy WebLinkAboutPRE22-000281_Staff Comments.pdfPREAPPLICATION MEETING FOR Urgent Care Clinic PRE 22-000281 CITY OF RENTON Department of Community & Economic Development Planning Division August 18, 2022 Contact Information: Planner: Jill Ding, 425.430.6598, jding@rentonwa.gov Public Works Plan Reviewer: Jonathan Chavez, 425-430-7288, jchavez@rentonwa.gov Fire Prevention Reviewer: Corey Thomas, 425.276.9582, cthomas@RentonRFA.org Building Department Reviewer: Rob Shuey, 425.430.7235 Please retain this packet throughout the course of your project as a reference. Consider giving copies of it to any engineers, architects, and contractors who work on the project. You will need to submit a copy of this packet when you apply for land use and/or environmental permits. Pre-screening: When you have the project application ready for submittal, call and schedule an appointment with the project manager to have it pre-screened before formal submittal. The pre-application meeting is informal and non-binding. The comments provided on the proposal are based on the codes and policies in effect at the time of review. The applicant is cautioned that the development regulations are regularly amended and the proposal will be formally reviewed under the regulations in effect at the time of project submittal. The information contained in this summary is subject to modification and/or concurrence by official decision-makers (e.g., Hearing Examiner, Planning Director, Development Services Director, Department of Community & Economic Development Administrator, Public Works Administrator and City Council). Renton Regional Fire Authority M E M O R A N D U M DATE: August 5, 2022 TO: Jill Ding, Senior Planner FROM: Corey Thomas, Lead Plans Review Inspector SUBJECT: Grady Way Urgent Care 1. The preliminary fire flow is 1,500 gpm. A minimum of two fire hydrants are required. One within 150-feet and one other within 300-feet of the building. A minimum of one new fire hydrant will be required. One hydrant is required within 50-feet of the fire department connection for the fire sprinkler system. 2. Approved fire sprinkler and alarm systems are required throughout the building. Fire alarm systems are required to be fully addressable and full detection is required. Separate plans and permits required by the fire department. Direct outside access is required for the fire sprinkler control room. 3. Fire impact fees for office occupancies is applicable at the rate of $ 1.99 per square foot. This fee is paid at time of building permit issuance. 4. Fire department apparatus access roadways are required. Fire lanes are required to meet 20-feet width with 25-foot inside and 45-feet outside turning radius. Roadways shall support a minimum of a 30-ton vehicle and 75-psi point loading. Fire Lane signage required for onsite roadways. Access is required to within 150-feet of all points on the building. DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT M E M O R A N D U M DATE: August 16, 2022 TO: Jill Ding, Senior Planner FROM: Jonathan Chavez, Civil Engineer III SUBJECT: Urgent Care Clinic 901 S Grady Way PRE22-000281 NOTE: The applicant is cautioned that information contained in this summary is preliminary and non-binding and may be subject to modification and/or concurrence by official City decision-makers. Review comments may also need to be revised based on site planning and other design changes required by City staff or made by the applicant. I have completed a preliminary review for the above-referenced proposal located at parcel(s) 9154600010 and 2023059007. The following comments are based on the pre-application submittal made to the City of Renton by the applicant. WATER The proposed redevelopment project is within the City of Renton’s water service area and in the 196-pressure zone and it is located within the five-year capture zone (Zone 2) of the City’s wellhead protection areas. There are existing 12-inch and 16-inch city-owned water mains within utility easements that are located within the subject properties. Please refer to city water project plans no. W-3020 and W-3344 for the location and sizes of the water mains within the properties. The maximum capacity of the existing on-site water mains is 5,000 gallons per minutes (gpm). There are also existing 24-inch and 16-inch water mains in Talbot Rd S that can deliver 9,000 gpm. Please refer to city water project plans no. W-3344 and W-0820. The static water pressure from the above water mains is approximately 68 psi at ground elevation of 39 feet. There are existing water meters to the existing buildings on the site including: • A 3/4-inch domestic water meter north of the proposed building. Based on the review of project information submitted for the pre-application meeting, Renton Regional Fire Authority has determined that the preliminary fire flow demand for the proposed development is 1,500 gpm for the new building. The following developer’s installed water main improvements will be required to provide domestic and fire protection service to the development including but not limited to: 1. Installation of additional fire hydrants around the buildings as required by the Fire Authority. 2. Installation of a backflow prevention assembly on private property behind the new/existing domestic water meters. The backflow prevention device for the domestic service must meet current standards as required by Washington State Department of Health (WAC 246-290-490). In accordance with Drinking Water Regulations, the building must have a 3/4-inch RPBA (Reduced Pressure Backflow Assembly). The RPBA shall be installed inside an above ground heated enclosure per City Standard Plan 350.2. The RPBA may be located inside the building if a drainage outlet for the relief valve is provided, and the location is approved by the City Plan Reviewer and City Water Utility Department. 3. Installation of a landscape irrigation meter and double check valve assembly (DCVA), if applicable. 4. Retaining walls, rockeries or similar structures cannot be installed over the water main unless the water main is inside a steel casing. 5. A conceptual utility plan will be required as part of the land use application for the subject development. 6. Adequate separation between utilities is required. Minimum separation between water and non-potable water utilities is 10-feet horizontal and 1.5-feet vertical. 7. The development is subject to applicable water system development charges (SDC’s) and meter installation fees based on the number and size of the meters for domestic uses and for fire sprinkler use. The development is also subject to fees for water connections, cut and caps, and purity tests. Current fees can be found in the 2022 Development Fees Document on the City’s website. Fees will be charged based on the rate at the time of construction permit issuance. a. The SDC fee for water is based on the size of the new domestic water to serve the project. The 2021 water fees are $4,500.00 per 1-inch meter. b. Water service installation charges for each proposed domestic water service is applicable. Water Service installation fee is $2,875.00* per 1-inch service line. Fee is payable at permit issuance. c. Drop-in meter fee is $460.00* per 1-inch meter, $750.00 per 1-1/2-inch meter, and $950.00 per 2- inch meter. Meters larger than 2-inches are set by the contractor and a processing fee of $220 is required. Fee is payable at permit issuance. d. A credit for the water system redevelopment fee will be issued for the existing water service to be cut can capped as part of the project. e. Final determination of applicable fees will be made after the water meter size has been determined. SDC fees are assessed and payable at permit issuance. SEWER 1. Sewer service is provided by City of Renton. 2. There is an existing 8-inch diameter sewer main (see City plan no. S-3020) located in the property. The applicant will need to propose how they intend to service the new buildings with sanitary sewer service. 3. There is an existing 6-inch side sewer stub, capped near the main (see the following link: https://edocs.rentonwa.gov/Documents/DocView.aspx?id=7564988&dbid=0&repo=CityofRenton&search id=98c09ef6-e70e-43de-beb1-2f0473f0724d). 4. The applicant will need to show how they propose to serve the new building with sewer service. 5. Service lines shall be designed and installed in accordance with City standards. The service line shall flow by gravity to the main. The minimum service line size is 6” diameter and the minimum slope is 2%. 6. The development is subject to a wastewater system development charge (SDC) fee. SDC fee for sewer is based on the size and number of new domestic water services to serve the project. The current sewer fee is $3,500.00 for a 1-inch meter. SURFACE WATER 1. There is an existing storm water system within the property. The southern region of the site currently discharges to Thunder Hills Creek and an adjacent wetland-like area. 2. A drainage report complying with the current version of the City adopted Surface Water Design Manual (SWDM) will be required. Based on the City’s flow control map, the site falls within the Peak Rate Flow Control Standard area matching Existing Conditions and is within the Black River Drainage Basin. Refer to Figure 1.1.2.A – Flow chart to determine the type of drainage review required in the RSWM. All stormwater improvements as per the drainage review along with stormwater improvements in the frontage are required to be provided by the developer. a. Effective June 22, 2022, the City of Renton has adopted the 2022 RSWDM, which is based on the 2021 King County SWDM. Under the new 2022 RSWDM stormwater requirements, on-site BMP sizing credits for modeling credits can no longer be used for privately maintained on-site BMPs, with the exception of full dispersion and full infiltration BMPs. 3. The site is located within Zone 2 of the Aquifer Protection Area (APA), and therefore open facilities and open conveyance systems may require a liner in accordance with the design criteria in Sections 6.2.4 and 1.2.3.3 of the 2022 City of Renton Surface Water Design Manual. 4. The site contains regulated slopes between 15% and 90% and high seismic hazard areas. The site topography is generally flat, with minor sloping towards the street on both frontages. 5. Maintenance access is required for any proposed stormwater tracts and shall be designed and installed in accordance with the City adopted SWDM. 6. Storm drainage improvements along all public street frontages are required to conform to the City’s street and stormwater conveyance standards. Any new storm drain installed on or off-site shall be designed and sized in accordance with standards found in Chapter 4 of the 2017 RSWDM and shall account for the total upstream tributary area, assuming developed conditions for onsite tributary areas and existing conditions for any offsite tributary areas. 7. If the new plus replaced pollution generating impervious surface exceeds 5,000 SF, the applicant will be required to provide enhanced basic water quality treatment. Any proposed detention and/or water quality vault shall be designed in accordance with the RSWDM that is current at the time of civil construction permit application. Separate structural plans will be required to be submitted for review and approval under a separate building permit for the detention and/or water quality vault. 8. Appropriate on-site BMPs satisfying Core Requirement #9 will be required to help mitigate the new runoff created by this development to the maximum extent feasible. On-site BMPs shall be evaluated as described in Section C.1.3 of the 2022 RSWDM. A preliminary drainage plan, including the application of on-site BMPs, shall be included with the land use application, as applicable to the project. The final drainage plan and drainage report must be submitted with the utility construction permit application. 9. A Construction Stormwater Permit from Department of Ecology is required if clearing and grading of the site exceeds one acre. Applicant must obtain permit and provide proof prior to Civil Permit issuance. 10. A geotechnical soils report for the site is required per the 2022 Renton Surface Water Design Manual Section C.1.3. Information on the water table and soil permeability (measured infiltration rates), with recommendations of appropriate on-site BMPs per Core Requirement #9 and Appendix C shall be included in the report. The report should also include information concerning the soils, geology, drainage patterns and vegetation present shall be presented in order to evaluate the drainage, erosion control and slope stability for site development of the proposed plat. The applicant must demonstrate the development will not result in soil erosion and sedimentation, landslide, slippage, or excess surface water runoff. 11. Erosion control measures to meet the City requirements shall be provided. 12. The current City of Renton Surface Water Standard Plans that shall be used in all drainage submittals are available online at the City of Renton website. 13. The 2022 Surface water system development fee is $0.84 per square foot of new impervious surface, but no less than $2,100.00. This is payable prior to issuance of the construction permit. This fee is subject to change based on the calendar year the construction permit is issued. TRANSPORTATION 1. Talbot Rd S is classified as a 7-lane Principal Arterial. Per RMC 4-6-060, 7-lane Principal Arterials are required to have a minimum ROW width of 125 feet, consisting of the following: 83 foot paved width, foot wide curbs, 8 foot wide landscaped planters, 8 foot wide sidewalks, and 2 feet of clear space at back of sidewalks. Street lighting and storm water improvements on the public street frontages are applicable. The Renton Trails and Bicycle Master Plan has a shared use path planned for Talbot Road S. a. The Transportation Division has no plans to widen Talbot Road S at this time. Development Engineering would support a modification request by the Applicant to provide the following modified street improvements on Talbot Road S: Retain the existing pavement width, install a 0.5 foot wide curb, 8 foot wide landscaped planter, 8 foot wide sidewalk, and 2 feet of clear space at back of sidewalk. Provide dedication as necessary, pending field survey. These requirements may change depending on the Traffic Impact Analysis that will be provided by the Applicant when submitting for a Land Use Application. 2. King County Metro Transit is planning to route the new RapidRide I-Line on Talbot Road S. The Applicant is encouraged to contact the I-Line Program Manager, Greg McKnight, at (206) 477-0344, or gmcknight@kingcounty.gov for I-Line service needs (bus pullouts, bus stops, etc) along the Talbot Rd frontage of the Sam’s Club site. 3. ADA access ramps shall be installed at all street crossings. Ramps shall be shown at each intersection. Ramps shall be oriented to provide direct pedestrian crossings. 4. Refer to City code 4-4-080 regarding driveway regulations: a. Driveways shall be designed in accordance with City standard plans 104.4. b. Maximum driveway slope is 15%. Driveways which exceed 8% shall provide slotted drains at the lower end with positive drainage discharge to restrict runoff from entering the garage. c. Driveways shall not be closer than 5-feet to any property line. d. The driveway on Grady Way serving the proposed below grade parking and the northernmost driveway serving the Sam’s Club site on Talbot Rd will continue to be restricted to right turn in and out movements. At the southern driveway only the left turn out movement would be restricted as it is currently. 5. Lighting plans and photometrics are required to be submitted with the land use application and will be reviewed during the construction utility permit review. Street lighting and street trees are required to meet current city standards. 6. A traffic impact analysis is required when the estimated vehicular traffic generated from a proposed development exceeds 20 vehicles per hour in either the AM (6:00 – 9:00) or PM (3:00 – 6:00) peak periods. The analysis must include a discussion on traffic circulation to and from the site and onsite traffic circulation. The study shall include trip generation and trip distribution for the project for both AM and PM peak hours. a. The traffic impact analysis must include Level of Service analysis at the following intersections: S Grady Way/ Main Ave S.; S Grady Way/Williams Ave S/ Sam’s Club Driveway; S Grady Way/Talbot Rd S; and, Talbot Rd S/I-405 Off Ramp/ S Renton Village Place. 7. Paving and trench restoration shall comply with the City’s Trench Restoration and Overlay Requirements. 8. The transportation impact fee is based on the type of land use. For hospital use, the 2022 transportation impact fee is $7.79 per square foot. Transportation impact fees are subject to change based on the year the building permit is applied for. GENERAL COMMENTS 1. All existing and proposed utility lines (i.e. electrical, phone, and cable services, etc.) along property frontage or within the site must be underground. The construction of these franchise utilities must be inspected and approved by a City of Renton inspector. 2. Adequate separation between utilities as well as other features shall be provided in accordance with code requirements: a. 7-ft minimum horizontal and 1-ft vertical separation between storm and other utilities is required with the exception of water lines which require 10-ft horizontal and 1.5-ft vertical. b. The stormwater line should be minimum 5 feet away from any other structure or wall or building. c. Trench of any utility should not be in the zone of influence of the retaining wall or of the building. 3. All civil construction permits for utility and street improvements will require separate plan submittals. All utility plans shall confirm to the Renton Drafting Standards. A licensed Civil Engineer shall prepare the civil plans. Please visit the Development Engineering Forms page for the most up-to-date plan submittal requirements: http://rentonwa.gov/business/default.aspx?id=42473 4. A landscaping plan and tree retention shall be included with the civil plan submittal. Each plan shall be on separate sheets. 5. Additional Building Permit Applications will be required for the following: a. Any retaining walls that exceed 4 feet in height, as defined by RMC 4-4-040. b. Detention vaults for storm water flow control. c. Demo of any existing structures on the project site(s). 6. Fees quoted in this document reflect the fees applicable in the year 2022 only and will be assessed based on the fee that is current at the time of the permit application or issuance, as applicable to the permit type. Please visit www.rentonwa.gov for the current development fee schedule. DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT M E M O R A N D U M DATE: August 18, 2022 TO: Pre-Application File No. PRE22-000281 FROM: Jill Ding, Senior Planner SUBJECT: Urgent Care Clinic 901 S Grady Way (Parcel Nos. 202305-9007 and 915460-0010) General: We have completed a preliminary review of the pre-application for the above-referenced development proposal. The following comments on development and permitting issues are based on the pre-application submittals made to the City of Renton by the applicant and the codes in effect on the date of review. The applicant is cautioned that information contained in this summary may be subject to modification and/or concurrence by official decision-makers (e.g., Hearing Examiner, Community & Economic Development Administrator, Public Works Administrator, Planning Director, and City Council). Review comments may also need to be revised based on site planning and other design changes required by City staff or made by the applicant. The applicant is encouraged to review all applicable sections of the Renton Municipal Code. The Development Regulations are available online at www.rentonwa.gov Project Proposal: The project site is located on the east side of Grady Way and consists of 2 parcels (parcel nos. 202305-9007 and 915460-0010) addressed as 901 S Grady Way. The proposal includes the construction of a one- story 12,500-square-foot Urgent Care Clinic. The proposed site improvements include new asphalt paving to support 41 surface parking stalls, exterior parking lot lighting, stormwater improvements, utility connections, and landscaping. The proposed project will utilize the existing driveway off of Talbot Rd S. The project site consists of an approximate 1.94-acre (84,500 square feet) Outlot 2 that is located within the proposed Home Depot and previous Sam's Club (Anchor Tenant) development. The Outlot was previously occupied with a gasoline fueling station that was demolished. The project site is located within the Commercial Arterial (CA) zone and Urban Design District D. A stream and wetland are mapped on the eastern portion of the project site, in addition a seismic hazard area and steep slopes are mapped on the site. Current Use: Currently the site is occupied with a vacant building that was formerly a Sam’s Club and is currently proposed to be redeveloped as a Home Depot. Development Standards: The project would be subject to RMC 4-2-120A, “Development Standards for Commercial Zoning Designations” effective at the time of complete application (noted as “CA standards” herein). Zoning: The property is located within the Commercial Mixed Use (CMU) land use designation, the Commercial Arterial (CA) zoning designation, and Urban Design District D. Medical Institutions are permitted within the CA zone as a Hearing Examiner Conditional Use. Conditional Use Permits are subject to compliance with the following criteria: 1. Consistency with Plans and Regulations: The proposed use shall be compatible with the general goals, objectives, policies and standards of the Comprehensive Plan, the zoning regulations and any other plans, programs, maps or ordinances of the City of Renton. 2. Appropriate Location: The proposed location shall not result in the detrimental overconcentration of a particular use within the City or within the immediate area of the proposed use. The proposed location shall be suited for the proposed use. 3. Effect on Adjacent Properties: The proposed use at the proposed location shall not result in substantial or undue adverse effects on adjacent property. 4. Compatibility: The proposed use shall be compatible with the scale and character of the neighborhood. 5. Parking: Adequate parking is, or will be made, available. 6. Traffic: The use shall ensure safe movement for vehicles and pedestrians and shall mitigate potential effects on the surrounding area. 7. Noise, Light and Glare: Potential noise, light and glare impacts from the proposed use shall be evaluated and mitigated. 8. Landscaping: Landscaping shall be provided in all areas not occupied by buildings, paving, or critical areas. Additional landscaping may be required to buffer adjacent properties from potentially adverse effects of the proposed use. Minimum Lot Size, Width and Depth – The minimum lot size required in the CA zone is 5,000 square feet. There are no minimum width or depth requirements. The project site would be comprised of an 84,500 sq. ft. outlot, which exceeds the minimum lot size requirement. The proposed site plan includes reconfigured lot lines, any new or adjusted lots would be required to meet minimum lot standards of the CA zone. Lot Coverage – The maximum building coverage permitted in the CA zone is 65% of the lot area of 75% if parking is provided within the building. The proposal for a 12,500 sq. ft. building on the 84,500 sq. ft. project site would result in a lot coverage of 15%, which is less than the 65% maximum permitted. Compliance with this requirement would be verified at the time of formal land use review. Setbacks – Setbacks are the distance between the building and the property line or any private access easement. Setback requirements in the CA zone are as follows: 15-foot minimum front/side yard along a street setback; a 20- foot maximum front/side yard along a street setback; and no rear or side yard setbacks, except 15 feet when the site abuts a residential zone. As shown on the preapplication site plan, the proposed urgent care clinic would maintain a minimum 15-foot front yard setback from Talbot Rd S. The project site does not abut a residential zone, therefore no other side or rear setbacks are applicable. Building Height – The maximum building height permitted in the CA zone is 50 feet, except 70 ft. for vertically mixed use buildings. Heights may exceed the zone’s maximum height with a Conditional Use Permit. Building elevations were not included with the submitted pre-application materials, therefore staff was unable to verify compliance with this requirement. Compliance with building height requirements would be verified at the time of formal land use application. Landscaping – The development standards require that all pervious areas within the property boundaries be landscaped. Therefore, all areas of the site not covered by structures, required parking, access, circulation or patios, must be landscaped with native, drought-resistant vegetative cover. Ten feet (10') of on-site landscaping is required along all public street frontages, with the exception of areas for required walkways and driveways. Surface parking lots with 15 to 50 parking spaces are required to provide 15 square feet of interior parking lot landscaping per parking space, as specified below: Interior Parking Lot Landscaping: Landscaping is required in parking lots in the amounts stipulated in RMC 4-4-070F Any interior parking lot landscaping area shall be sized to dimensions of at least eight feet (8') by twelve feet (12'). Landscaping shall be dispersed throughout the parking area and shall include a mixture of trees, shrubs, and groundcover as follows: a. Trees shall be two inches (2") in diameter at breast height (dbh) for multi-family, commercial, and industrial uses. At least one tree for every six (6) parking spaces within the lot interior shall be planted. b. Shrubs at the minimum rate of one per twenty (20) square feet of landscaped area shall be planted. Up to fifty percent (50%) of shrubs may be deciduous. c. Ground cover shall be planted in sufficient quantities to provide at least ninety percent (90%) coverage of the landscaped area within three (3) years of installation. d. There shall be no more than fifty feet (50') between parking stalls and an interior parking lot landscape area. Perimeter Parking Lot Landscaping: Such landscaping shall be at least ten feet (10') in width as measured from the street right-of-way. Standards for planting shall be as follows: a. Trees shall be two inches (2") in diameter at breast height (dbh) for multi-family, commercial, and industrial uses at an average minimum rate of one tree per thirty (30) lineal feet of street frontage. b. Shrubs at the minimum rate of one per twenty (20) square feet of landscaped area. Up to fifty percent (50%) of shrubs may be deciduous. c. Ground cover in sufficient quantities to provide at least ninety percent (90%) coverage of the landscaped area within three (3) years of installation. Please refer to landscape regulations (RMC 4-4-070) for further general and specific landscape requirements. Tree Preservation – A tree inventory and a tree retention plan along with a tree retention worksheet shall be provided with the formal land use application. According to the tree retention regulations, the tree retention plan must show preservation of at least thirty percent (30%) of significant trees, and indicate how proposed building footprints would be sited to accommodate preservation of significant trees that would be retained. The Administrator may authorize the planting of replacement trees on the site if it can be demonstrated to the Administrator’s satisfaction that an insufficient number of trees can be retained. Properties subject to an active land development permit shall comply with all the following minimum tree credit requirements: i. Tree credit requirements shall apply at a minimum rate of thirty (30) credits per net acre. ii. Either tree retention or a combination of tree retention and supplemental tree planting (with new small, mediu m, or large tree species) shall be provided to meet or exceed the minimum tree credits required for the site. iii. Supplemental tree planting shall consist of new small, medium, or large species trees, as defined in RMC 4‐ 11‐200, Definitions T. The supplemental trees shall be planted with a minimum size of two‐inch (2") caliper, or evergreen trees with a minimum size of six feet (6') tall. The Administrator shall have the authority to approve, deny, or restrict the tree species for proposed supplemental trees. iv. Within subdivisions, location of supplemental tree replanting shall be prioritized within tree tract(s) versus individual lots. v. Tree credit value for each tree, existing or new, is assigned as shown in the following table: TREE SIZE TREE CREDITS New small species tree 0.25 New medium species tree 1 New large species tree 2 Preserved tree 6‐9 caliper inches 4 Preserved tree 10—12 caliper inches 5 Preserved tree 12—15 caliper inches 6 Preserved tree 16—18 caliper inches 7 Preserved tree 19—21 caliper inches 8 Preserved tree 22—24 caliper inches 9 Preserved tree 25—28 caliper inches 10 Preserved tree 29—32 caliper inches 11 Preserved tree 33—36 caliper inches 12 Preserved tree 37 caliper inches and greater 13 Significant trees shall be retained in the following priority order: Priority One: Landmark trees; significant trees that form a continuous canopy; significant trees on slopes greater than twenty percent (20%); Significant trees adjacent to critical areas and their associated buffers; Significant trees over sixty feet (60') in height or greater than eighteen inches (18") caliper; and Trees that shelter interior trees or trees on abutting properties from strong winds, which could otherwise allow such sheltered trees to be blown down if re moved. Priority Two: Healthy tree groupings whose associated undergrowth can be preserved; other significant native evergreen or deciduous trees; and other significant non-native trees. Priority Three: Alders and cottonwoods shall be retained when all other trees have been evaluated for retention and are not able to be retained, unless the alders and/ or cottonwoods are used as part of an approved enhancement project within a critical area or its buffer. The Administrator may require independent review of any land use application that involves tree removal and land clearing at the City’s discretion. A tree retention plan is required at the time of formal land use application if any trees are proposed for removal. Screening - All surface mounted or rooftop-operating equipment shall be enclosed so as to be screened from public view in accordance with the requirements outline under RMC 4-4-095. Fences/Retaining Walls – If the applicant intends to install any fences as part of this project, the location must be designated on the landscape plan. A fence taller than six feet (6') requires a building permit. New or existing fencing would need to comply with RMC 4-4-040. Retaining walls shall be composed of brick, rock, textured or patterned concrete, or other masonry product that complements the proposed building and site development. There shall be a minimum three-foot (3') landscaped setback at the base of retaining walls abutting public rights-of-way. Please refer to retaining wall standards (RMC 4-4-040) for additional information. Parking – The following ratios would be applicable to the site: Use Ratio Required Spaces Medical Institutions A minimum and maximum of 1 space for every 3 beds, plus 1 per staff doctor, plus 1 for every 3 employees. unknown Staff was unable to determine the number of spaces required as information regarding the number of beds and or staff counts were not provided with the submitted pre-application materials. The proposal includes 41 surface stalls. A twenty five percent (25%) reduction or increase from the minimum or maximum number of parking spaces may be granted for nonresidential uses through site plan review if the applicant can justify the modification to the satisfaction of the Administrator. Justification might include, but is not limited to, quantitative information such as sales receipts, documentation of customer frequency, and parking standards of nearby cities. The applicant will be required at the time of formal land use application to provide detailed parking information (i.e. stall and drive aisle dimensions) and calculations of the subject site. It should be noted that the parking regulations specify standard stall dimensions. Surface parking stalls must be a minimum of 9 feet x 20 feet, compact dimensions of 8½ feet x 16 feet, and parallel stall dimensions of 9 feet x 23 feet; compact surface parking spaces shall not account for more than 30 percent of the spaces in the surface parking lots. ADA accessible stalls must be a minimum of 8 feet in width by 20 feet in length, with an adjacent access aisle of 8 feet in width for van accessible spaces. The appropriate amount of ADA accessible stalls based on the total number of spaces must be provided. Bicycle parking shall be provided at a rate of 10 percent of the number of required parking spaces. Vehicular Connection: A connection shall be provided for site-to-site vehicle access ways, where topographically feasible, to allow a smooth flow of traffic across abutting CA lots without the need to use a street. Access may comprise the aisle between rows of parking stalls, but is not allowed between a building and a public street. Refuse and Recycling Areas – Refuse and recycling areas need to meet the requirements of RMC 4-4-090, “Refuse and Recyclables Standards”. There are general requirements for all uses for location, signage, screening, and setbacks for collection areas and specific requirements. In office, educational and institutional developments, a minimum of two (2) square feet per every one thousand (1,000) square feet of building gross floor area shall be provided for recyclables deposit areas and a minimum of four (4) square feet per one thousand (1,000) square feet of building gross floor area shall be provided for refuse deposit areas. A total minimum area of one hundred (100) square feet shall be provided for recycling and refuse deposit areas. Compliance with this requirement would be verified at the time of land use application. Access – The site currently has one driveway curb cut off Talbot Rd. S. There is also a second curb cut off Talbot Rd S located to the west of the project site that would provide access to the Home Depot parcel. All existing access points are proposed to be maintained. Driveway widths are limited by the driveway standards, in RMC 4-4080I. There shall be no more than two (2) driveways for each three hundred thirty feet (330') of street frontage serving any one property or among abutting properties under unified ownership or control. For each additional one hundred sixty five feet (165') of street frontage an additional driveway may be allowed. Compliance with the driveway standards would be required with the land use application. Urban Design Standards – Compliance with Urban Design Regulations, District ‘D’, is required.. See Renton Municipal Code section 4-3-100. The following bullets are a few of the standards outlined in the regulations. • A primary entrance of each building shall be located on the facade facing a street, shall be prominent, visible from the street, connected by a walkway to the public sidewalk, and include human-scale elements. • Parking shall be located so that no surface parking is located between a building and the front property line, or the building and side property line, on the street side of a corner lot. • The number of driveways and curb cuts shall be minimized, so that pedestrian circulation along the sidewalk is minimally impeded. • Amenities such as outdoor group seating, benches, transit shelters, fountains, and public art shall be provided. • All building facades shall include modulation or articulation at intervals of no more than forty feet (40'). • Modulations shall be a minimum of two feet (2') deep, sixteen feet (16') in height, and eight feet (8') in width. • Pedestrian overhead weather protection in the form of awnings, marquees, canopies, or building overhangs shall be provided. These elements shall be a minimum of four and one-half feet (4-1/2') wide along at least seventy five percent (75%) of the length of the building facade facing the street, a maximum height of fifteen feet (15') above the ground elevation, and no lower than eight feet (8') above ground level. • Upper portions of building facades shall have clear windows with visibility into and out of the building. However, screening may be applied to provide shade and energy efficiency. The minimum amount of light transmittance for windows shall be fifty percent (50%). • On any facade visible to the public, transparent windows and/or doors are required to comprise at least fifty percent (50%) of the portion of the ground floor facade that is between four feet (4') and eight feet (8') above ground (as measured on the true elevation). Where windows or storefronts occur, they must principally contain clear glazing. Buildings shall employ material variations such as colors, brick or metal banding, patterns, or textural changes. Critical Areas: A stream and wetland are mapped on the eastern portion of the project site, in addition a seismic hazard area and protected and sensitive slopes are mapped on the site. The applicant would be required to provide a wetland report, stream study, and geotechnical report at the time of formal land use application. The wetland report and stream study would be required to address compliance with any required wetland and/or stream buffer requirements. The wetland buffer would be based on category of the wetland as well as wildlife function per the following table: The stream buffer would be based on the stream classification as noted in the table below: Stream Type Buffer Building Setback Type F 115 ft. 15 ft. Type Np 75 ft. 15 ft. Type Ns 50 ft. 15 ft. All Other Land Uses Wetland Category Buffer High wildlife function (8-9 points) Moderat e wildlife function (5-7 points) Low wildlife function (3-4 points) All Other Scores Category I – Bogs & Natural Heritage Wetlands 200 ft Category I - All others 200 ft 150 ft 115 ft 115 ft Category II 175 ft 150 ft 100 ft n/a Category III 125 ft 100 ft 75 ft n/a Category IV 50 ft n/a A 15-foot setback is required between buildings and critical area buffers In addition, a geotechnical report would be required to be submitted with the land use application demonstrating that the proposed addition would comply with the seismic hazard area requirements. Environmental Review: The proposal would be subject to Environmental (SEPA) Review as the proposal includes a commercial building in excess of 4,000 square feet with more than 20 parking spaces. Permit Requirements: The proposed project would require Hearing Examiner Conditional Use Permit, Site Plan Review, and Environmental (SEPA) Review. All land use permits would be processed within an estimated time frame of 12 weeks. The application fees would total $9,135 ($3,300 CUP + $3,800 Site Plan Review + $1,600 SEPA Review + $435 technology fee = $9,135), all fees are subject to change. Any modifications requested would require an additional $260 fee. In addition to the required land use permits, separate construction and building permits would be required. Detailed information regarding the land use application submittal can be found on the City’s website by clicking “City Documents” on the home screen, then “CED Forms”. All forms are in alphabetical order. The City now requires electronic plan submittal for all applications. The City’s Electronic File Standards can also be found on the City’s website. Public Notice: The applicant will be required to install a public information sign on the property. Public Meeting: Please note a neighborhood meeting, according to RMC 4-8-090, is required for: a. Preliminary plat applications; b. Planned urban development applications; and c. Projects estimated by the City to have a monetary value equal to or greater than ten million dollars ($10,000,000), unless waived by the Administrator. The intent of this meeting is to facilitate an informal discussion between the project developer and the neighbors regarding the project. The neighborhood meeting shall occur after a pre-application meeting and before submittal of applicable permit applications. The public meeting shall be held within Renton city limits, at a location no further than two (2) miles from the project site. Public Outreach Sign: Projects estimated by the City to have a monetary value equal to or greater than $10,000,000 requires the applicant to install a public outreach sign. Public outreach signs are intended to supplement information provided by public information signs by allowing an applicant to develop a personalized promotional message for the proposed development. The sign is also intended to provide the public with a better sense of proposed development by displaying a colored rendering of the project and other required or discretionary information that lends greater understanding of the project. See the attached Public Outreach sign handout for more information and specifications. Impact Mitigation Fees: In addition to the applicable building and construction fees, the following impact fees would be required prior to the issuance of building permits. Please note these are the current 2022 fees and the fee in effect at the time of building permit issuance would apply: • A Fire Mitigation fee based on the rate of $1.99 per sq. ft. of medical office would be required. • A Transportation Mitigation Fee based on $32.94 per sq. ft. of medical office would be required. Note: When the formal application materials are complete, the applicant shall have the application materials pre-screened prior to submitting the complete application package. Please contact Jill Ding, Senior Planner at 425-430-6598 or jding@rentonwa.gov for application pre-screening .